Do you have to reinstall Nvidea and Broadcom drivers every time the kernel is updated? The new kernel would not even load to where I could get to my desktop. Help?? I could not even sign in with older kernels. Had to use a Puppy CD to edit my Grub menu.lst so I could sign in on the older kernel.
View 9 RepliesI upgraded to Fedora 12 right after release, everything was working fine until update on previous weekend. Looks like it updated Wacom drivers and kernel. Now what I have. I hotplug my tablet in USB, and everything seems fine, I can position a cursor and press buttons, but after I press some button it hangs (LEDs on tablet are responding) I must remove Stylus from proximity in order to make it respond again (while stylus is away LED on tablet switches off for a fraction of second).
If I move mouse during tablet hanging, applications barely respond and if they are it is like mouse button is pressed (selecting text). I tried wacdump, and it's reporting everything's fine (X,Y, Tilt, Pressure everything shows up). I couldn't find evidence that wacom driver is controlling it, but I assume if wacdump is reporting then it is. I have:
Kernel 2.6.31.6-145.fc12.x86_64
linuxwacom.x86_64 0.8.2.2-15.fc12
I didn't touch xorg.conf in sense of tablet, but it worked for me in F11 and until now. I'm trying to make least manual configurations possible. Through exploring /proc/bus/usb/devices and kernel messages I confirmed that wacom drives is handling the tablet. And I noticed that in X's log
(II) config/hal: Adding input device Wacom Intuos3 9x12
(**) Wacom Intuos3 9x12: always reports core events
(**) Wacom Intuos3 9x12 device is /dev/input/event8
(**) Wacom Intuos3 9x12 (Wacom Intuos3 9x12) is not a pad
(**) Wacom Intuos3 9x12 is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Intuos3 9x12: reading USB link
(**) Wacom Intuos3 9x12: threshold = 61
(**) Wacom Intuos3 9x12: max x = 60960
(**) Wacom Intuos3 9x12: max y = 45720
(**) Wacom Intuos3 9x12: max z = 1023
(**) Option "BaudRate" "9600"
(**) Wacom Intuos3 9x12: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Intuos3 9x12" (type: Wacom Stylus)
(EE) Wacom Intuos3 9x12: Top/Bottom area overlaps with another devices.
(EE) Couldn't init device "Wacom Intuos3 9x12"
(II) UnloadModule: "wacom"
(EE) config/hal: NewInputDeviceRequest failed (1)
I've encountered quite similar error in openSUSE when was configuring tablet manually in xorg.conf. As I can see problem is with "pad" device, which I disabled in openSUSE in order to make X running. So why is it not working?
I'm using F13 64bit with the proprietary nvidea driver. From yesterday's software update, a new kernel was installed:
old kernel: vmlinuz-2.6.33.5-112.fc13.x86_64
old initramfs: initramfs-2.6.33.5-112.fc13.x86_64.img
new kernel: vmlinuz-2.6.33.5-124.fc13.x86_64
new initramfs: initramfs-2.6.33.5-124.fc13.x86_64.img
I load grub from another distro partition. After the update, I changed the two lines in menu.lst, as per the above mentioned, to match the new kernel.
The problem now is that after booting F13, my monitor displays a warning saying "video mode not supported".
These two files are now at /etc/x11:
xorg.conf.livna-config-backup:
# Xorg configuration created by livna-config-display
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
EndSection
[Code].....
I'm not sure if it's exactly the same issue as mine. In case it is, it looks like that all I have to do is:
1 - boot from the previous kernel, and
2 - code: "yum install akmod-nvidia"
I am running Slackware64-current(multi-lib) and I have stumbled across something that I don't fully understand.I have read that the kernel-headers should not be updated as glibc is compiled against them and therefore requires that set of kernel headers. Recently the kernel version has been bumped a couple of times but glibc has stayed the same.Should glibc be re-compiled each time there is a kernel update?
Perhaps someone can explain, in very simple terms, the relationship between the kernel, the kernel headers, the kernel modules and glibc.
I'm running F13, Is that possible? Can I use a rawhide repository to update my radeon floss driver and get latest updates?
View 1 Replies View RelatedToday I spend the day updating to Fedora 15 (from 14). And by spent the day updating to Fedora 15, I mean that like the last 3 updates I've tried with Fedora, they end up getting hosed and I was forced to rebuild using a live disk. That being said I was able to install a fresh instance of Fedora, as well as use leigh123linux's "F15,F14, F13 & F12 Nvidia driver guides" thread to install the necessary drivers on my machine. However after the last reboot, I'm stuck with a funky top screen.
View 7 Replies View RelatedI have a nVidia GeForce4 MX 4000 graphics card. How do I install the updated nVidia drivers so I can use the desktop effects in KDE?
View 5 Replies View RelatedI am using the default CVS available in Fedora 9. I initiated the CVS server by
cvs -d /usr/local/cvsproj init
To check-in and check-out the following exports commands are used
export CVS_RSH=ssh
export CVSROOT=:ext:swathi@SERVER:/usr/local/cvsproj
I shall explain problem by taking an example. A project was checked in long before (for example the checkin date is 25 Feb 2010). And today (i.e. 21 June 2011) I checked out the project from the repository. After checkout, the date of the project in the repository is changed from 25 Feb 2010 to 21 June 2011. This date is set to all the subfolders in that project. But the files in the project retains the checking date i.e. 25 Feb 2010. Why the check-in dates are getting updated/changed to the system time after doing check-out.
I just finished an update on the kernel and it seems to be ok as shown in the grub:
Code:
default=0
timeout=5
splashimage=(hd0,8)/boot/grub/splash.xpm.gz
[code]...
Since there is no "Additional Drivers" app in Fedora like there is in Ubuntu, how the heck can I install the Broadcom STA drivers from the Live CD without using an Ethernet cable? And how the heck can I ensure that they stay installed, even after installing Fedora? I suppose putting the RPM on a USB Flash Drive will work, but that's the only thing I can think of... And is there an RPM out there for this specific driver?
View 8 Replies View RelatedI had to uninstall f10 from my system because it would lock up my system anywhere from 1 to 5 minutes into using it and noone could tell me why.
NOW, I put 9 back on my system and after it updates everything, it locks up again. it does give me the option of the new kernel and the original install's kernel and if I choose the original to boot with, I don't have any problems.
SO, is there any way to fix it, OR to exclude the kernel and initrd from being updated?
I've been having trouble getting the latest kernel to update, due to an error resolving dependencies. I've used yumex to remove old versions of kmod-nvidia that were fc10 specific, and gotten past that. However, when I updated the kernel, yumex reported that mkinetrd failed. Checking, the newest kernel listed in grub.conf is the one I'm using, not the one I just installed. What do I need to do to get the updated kernel properly listed and ready to use?
View 14 Replies View RelatedContents of grub.conf
Code:
# grub.conf generated by anaconda
#
[code]...
In an attempt to ameliorate some other problems (lm_sensors, and loopback), and based on several forum entries, I decided to update the default f15 kernel (2.6.38.35) using kernel-2.6.39-1.fc16.x86_64.rpm from rawhide. It seemed to install without problems and when I rebooted it seemed to hang just before completing the boot process. The on screen boot messages ended with:
Started Display Manager
Started LSB: daemon for libvirt ........
Starting LSB: suspend/resume libvirt guests on shutdown/boot
[ 12 ......
about a dozen similar lines ending with
[25.030991 hci_cmd_timer: hci0 command tx timeout
then it apparently hangs
However, at that point I can log into to a console using Cntl-Alt-f2, so most, if not all, the crucial boot processes seem to have completed. There is an issue with the nVidia driver that I will deal with by modifying /boot/grub/grub.conf to re-enable nouveau, but I am stumped by what is causing the hang up. There is a certain amount of traffic regarding a similar problem with Ubuntu 11.04, but no solution other than it seems to be related to a BIOS bug (NFI)
what sub-system uses the "hci_cmd_timer" and why it might interfere with the boot process? Has anyone else run into a similar problem with f15?
Is there a better way to get an updated kernel in f15? I do want to keep all the Red Hat patches and back ports, so reluctant to build a kernel from scratch from upstream sources at kernel.org (and maybe just a bit apprehensive ;-})
Don't know if there's going to be much anyone can do but I just installed UNR to my Acer and did an update, restarted it and it went blank screen for ages, and the hard drive light went on, I assumed this was a crash so re-started the computerTried turning it back on and it again had a blank screen, no HD light, tried again same, took battery out and did the same (this has worked previously with Limpus) and no luckI don't even get to the BIOS menu.
View 1 Replies View RelatedI think I know quite well what my problem is. However, I'm still too much of a newbie to know how to solve it.My problem: I no longer get a login screen on my server after I ran a yum update which updated my kernel (thank god, vnc server still works).Cause: During startup Fedora complains that it can't load the module nvidia.ko. Reason: The module doesn't match the current kernel.
View 5 Replies View Relatedthere was a new kernel update that I installed today. I used some kl mod packages to work my broadcom. For some reason its not working after the kernel. Is there a way I can recompile the driver or so?
View 7 Replies View RelatedMy kernal version is 2.6.35.6-45.fc14.i686 (2.6.35). I have installed fedora 14. I dont have a wired network connection , so as mentioned in one the threads [URL]... i downloaded the RPM fusion of the driver and followed the steps. This is the first time m installing linux ,i have no idea if my kernel is kmod version. But when tried installing any of those codes provided it gave an err saying NOTHING TO DO. But my network manager doesn't show the wlan. It still says driver firmware missing. When checked the loaded kernel it did have ssb and b4. I did blacklist them. But reappears everytime i check and wl is not loaded.CAN anyone please help me know wat I should do?
View 5 Replies View RelatedIn the latest Fedora 11 updates, kernel 2.6.30.5-43.fc11.x86_64 breaks broadcom-wl functionality on my BCM4312 wifi adapter
Code:
$ lspci -v | awk '/Ether|Net/,/^$/'
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Subsystem: Dell Device 01f1
Flags: bus master, fast devsel, latency 64, IRQ 17
[code]....
and all is well, the modprobe commands can go in /etc/rc.local. BCM43xx *.inf driver for ndiswrapper (32 and 64 bit)here:
(kmod-wl-2.6.30.5-43.fc11.x86_64-5.10.91.9-4.fc11.2.x86_64 is installed)
My update to kernel version 2.6.33.5-124 last night killed my Dell wireless, which uses broadcom-wl 5.60.48.36-1. What happened and how do I fix it?
View 14 Replies View RelatedYou know, I thought I had my Broadcom issues all figured out, I have a simple list of installing the RPM Fusion repos do a yum update and yum install kmod-wl and everything works.However, this time it didn't work. I am installing a new fedora 14 for a friend who is totally fed up with windows and I get this error: (Yes I have searched the internet and Fedora forums for an answer)
[code]...
I have tried the two yum suggestions and they don't work I have tried updating the kernel and have installed kernel-devel-'uname -r' (suggested by another site) I have tried installing broadcom-wl and b43-openfwwf which only knocked out the card entirely
Yesterday fedora automatically updated the linux kernel, and now it wont start entirely up. After the fedora logo has finished loading up the white, and it has turned into the real logo, nothing happens.However, i can boot into fedora with the old kernel via grub, so i guess it is related to the kernel update.
View 14 Replies View RelatedAbout 6 months ago or so, I got a new 802.11ac card for my laptop:
$ lspci | grep Broadcom
07:00.0 Network controller: Broadcom Corporation BCM4352 802.11ac Wireless Network Adapter (rev 03)
This one uses the broadcom-sta-dkms binary driver in module wl. Everything was working fine until a few days ago. I booted up the laptop following a power failure and the network was acting very strange. Upon connection to the network, I had network access for a brief period, then it went away. Network manager claimed to still be connected. The access point thought I was connected as well. No packets were getting through. After many cycles of trial and error, I found that upon each network connection (different network, same network, didn't matter) I could ping the router for about 30 - 45 seconds.
After that, my pings went unanswered. Using wireshark in monitor/promiscuous mode, I found that I was indeed not seeing any replies and no machine on the network was responding to my ARP requests. Inspecting the ARP cache before and after, I see the mac address of the router as usual up until a couple of minutes after the pings stop coming back. I am also seeing wireless activity from other machines on the network, but I think it was only broadcast activity I was seeing. This behavior didn't change with signal strength either. I saw the same behavior when I was 3 feet from the router as when I was 50 feet from the router. Wireshark didn't show any other activity that looked out of place to me.
I did find a work around. If I purge the broadcom-sta-dkms package (apt-get purge broadcom*), reboot (haven't checked if unloading the wl module is sufficient), install the broadcom-sta-dkms package, and manually load the wl module, everything works as expected. I'm not sure why the driver won't survive the reboot. I have had to do this each time I boot my laptop for the last few days. I'm not sure what might have changed as before that power failure I think I had a couple of weeks uptime and I do updates at least weekly. I think I remember seeing an update to the kernel come through at one point recently. I tried reverting to the previous kernel version but that didn't seem to do the trick.
I'm on Debian Jessie.
I have a problem here with my updated kernel. I'm currently using Fedora 14 kernel 2.6.35.9-64, and my wireless card Broadcom BCM4312, which had an issue before with Linux distros, is working fine already, thanks to the kmod-wl software driver. My problem now is this, after updating to kernel 2.6.35.10-72, fedora does not boot, and I noticed that the wireless card is the only thing not activating, compared to the working kernel. And when i looked at the log of the bootup (pressed right arrow key), I saw this:
[code]...
i just updated my Fedora 14 from Kernel version 2.6.35.11-83 to 2.6.35.11-88 Now the driver for the broadcom wireless ethernet adapter is not detected anymore I installed the driver using
[code]...
The package is still installed but when i but when i use modprobe again the output is "module wl not found" Anybody some ideas? By the way, here is the hardware specification
[code]...
The latest installed kernel stopped working. ( 2.6.35.13-92.fc14.i686) It won't boot. I just get black screen with blinking cursor in top left corner. How do I, or can I, remove and reinstall?
View 4 Replies View RelatedI wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
I am trying to install the Nvidia Quadro NVS 110 169.04 drivers but am having issues during install. Prior to attempting my install I did install the kernel-devel rpm so it can compile. after running the RPM I get. Quote: No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]?
which of course does not work. next it says Quote: "No precompiled kernel interface was found to match your kernel; this means that the installer will need to compile a new kernel interface.. i hit okay and move on to. Quote: Error: Unable to find the kernel sources tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat linux systems, for example be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. if you know the correct kernel source files are installed, you may specify the kernel source path with the "--kernel-source-path' command line option
On my virtual machine ubuntu 8.10, the date and time settings are not updated every time when I restart the machine.
View 2 Replies View RelatedUbuntu seems to think my device is disabled. The switch is on and the blue light next to the switch is also on. I read up on this on other threads, but the solution involved using the cd. I had to install from windows using the iso and alcohol 120 because my cddrive is totally dead.
View 3 Replies View Related