Red Hat / Fedora :: Can't Install FC 11 (64-bit) - Error "Press The <Enter> Key To Begin The Installation Process"
Jan 20, 2010
I'm trying to install Fedora 11 (64-bit) but after a small message about ISOLINUX the monitor refreshes and displays the following message: "Press the <Enter> key to begin the installation process." At that point the keyboard dies and I can't go any further. I tried 4 different FC11 dvds, also tried different PS2 and USB keyboards but the problem persists.
How to install FC 10 first and then upgrade to FC11. I tried that as well with no luck. I can install FC10 with no problems but why not FC11?
View 7 Replies
ADVERTISEMENT
Jul 6, 2009
- Press the <Enter> key to begin the installation processisolinux: Disk error 80, AX=42BA, drive 94Boot failed: press a key to retry
View 4 Replies
View Related
Jul 22, 2009
I have a new Dell R710 dual processor machine I'm trying to install Fedora 11 x86_64 on (all versions I mention in this post are x86_64 bit). I downloaded the cd iso files, burned them to cd (I don't have a DVD burner), then told my machine to boot to the optical drive.
I get a very brief introduction message about ISOLINUX then the monitor refreshes and gives me the following message: "Press the <Enter> key to begin the installation process."
Naturally, I press the Enter key(s) on my keyboard. Nothing happens. I try Alt ASCII combinations that might mimic an Enter key. No dice. ctrl-alt-delete works, however, and the machine reboots.
My checksums for the iso's are perfect, and the install process triggers perfectly on other machines. Just not this one.
After much vain research, I download the Fedora 11 Live-KDE, burn it to CD and try it. It doesn't work - the same thing happens. I tried the net install, and it doesn't work either.
On a lark, I download the Fedora 10 Live KDE iso and burn it to cd. It works perfectly and skips the "Enter" phrase entirely. I take my Fedora 11 Live KDE disc and put it in another machine and it, too, works perfectly, which leads me to believe my cd burns are fine.
I've also used usb creator to create a bootable USB drive. It doesn't ask me to press enter - it just fails with a really arcane IF=0 error (arcane to me, anyway).
So I'm at a loss. I'd like to install Fedora 11 on this machine, but may end up with Fedora 10 or CentOS if I can't figure this out.
Is there some weird BIOS setting somewhere I'm missing? I find it really weird that my fedora 10 cd works, but my fedora 11 cd does not (but my fedora 11 cd works in other machines).
View 11 Replies
View Related
Dec 9, 2009
I have just installed Fedora 12. After my pc boots up, the message:"Press any key to ent This continues to appeuntil I press any key and then the GRUB boot menu appears:Fedora (2.6.31.6-145.fc12.i686.PAE)BootIf I choose "Fedora", it boots properly into the login screen.What do I need to do to have the system boot directly into the log in screen, without going into this loop, boot menu and having to choose what to boot?
View 3 Replies
View Related
Jan 7, 2011
Today, I was downloading some stuff from online. I left for a few minutes and came back to find that someone had hit my loose power cord, causing the computer to restart. When I completed the reboot (It always says "Insert system disk and press enter" after checking CD drives), and had it load OpenSuSE 11.3 Failsafe (Regular won't work for me), it loaded into Teal (BASH, Command Prompt, Kommand, whatever you want to call it). At first, I thought maybe I screwed up and told it to load into that. But, I tried again, and it did the same. I tried using Non-Failsafe, and got the same results. I am able to edit, add, or remove programs from the Linux partition, though.
View 3 Replies
View Related
Jun 27, 2011
Trying to do the upgrade through "Software Updates", however because there are no current updates, I cannot click on the "Upgrade" button to begin the upgrade process to FC14.
Is there any other way to do this besides downloading the DVD and installing?
View 8 Replies
View Related
May 3, 2010
I downloaded the appropriate iso for the ps3 from here:[url]
(specifically: ubuntu-10.04-desktop-powerpc+ps3.iso via torrent)
Installation runs smoothly up until 100% and then i am prompted to reboot.
When i click reboot, i get info on some daemons(?) shutting down(i think) and then the cd is automatically ejected and i am prompted to press enter.
So far, so good. After i hit enter though, i get a large amount of various read errors and finally a segmentation fault. The system just hangs there :/.
I forcibly reboot the PS3, and then i am greeted with the pack of errors that are shown in the screenshot.
View 5 Replies
View Related
Jun 15, 2010
I've been fiddling about with vortexbox (the one before 1.4 I think), for a while. This is a music ripping and server rpm setup using Fedora 11 as the base.
As it was on a test machine, decided to try changing the logical volume sizes of LogVol00 and LogVol02 to fit a few more cd's on 02 before getting a new pc (just to see how it works).
Logged on and opened up the graphic version of lvm (using gnome). Then selected the LogVol02 logical volume, select edit, changed name to LogVol02-Storage, saved and logged out. Rebooted vortexbox since then its been unable to start properly (is this a kernel panic?).
Read up a lot on lvm on the net, have access to Fedora 11 disk 1, so logged on. Eventually managed (I thought to) to change LogVol02-Storage to LogVol02 using lvrename.
However, still refuses to boot completely.
The message it gives is as follows (sort of): Welcome to Fedora Press '1' to enter interactive startup
Setting up Logical Volume Management: 3 logical volume(s) in volume group 'VolGroup00' now active
*** An error occurred during file system check.
*** Droping you to a shell; the system will reboot when you leave the shell.
Give root password for maintenance (or type Control-D to continue):
Loving vortexbox appart from this. Will it be easier just to reinstall everything? If so, is there a way of listing all the changes I've done so I can reproduce (I'm thinking of just looking at all the commands I ran on the CLI).
Otherwise, is there a way of listing all of the commands I ran in terminal and piping them into a file so I can see what I need to do to rebuild after reinstalling?
View 2 Replies
View Related
Jan 7, 2010
I bought a t770.uk HP desktop PC, which came without a Hard drive as the pervious owner had removed it for security reasons. A week later I got a hold of a brand new - out of an anti-static sealed bag - compatible Western Digital Caviar SE 80GB SATA150 7200 HDD, and installed it as directed by my t770.uk manual. Up until now, things looked to be on a roll. As I don't have any windows OS, I figured Ubunutu would be the way to go (and it certainly is from what I've heard and read about it. I can't wait!).
So I sent off for a CD and it popped through my mail a few weeks back. The problem that I am having is after booting past a very brief view of the HP POST screen, the screen goes black with the error "Disc boot failure-insert system disk and press enter". I've tried placing the Ubuntu disc in (assuming it is asking for that? An OS disc) and restarting, and changing the boot order around, but no matter what I do the error persists and I can't install Ubuntu. I really want to get this PC running with Ubuntu.
View 9 Replies
View Related
Feb 2, 2011
Making iPhone apps. a simple process? where do i begin. i have no idea what I'm doing.
View 4 Replies
View Related
Sep 4, 2010
I have downloaded the Damm small linux iso ,and burned the image to the CD with infrarecorder .But when i try to boot it from the CD ,I get the DSL logo and press enter to boot ,then the computer freezes with two small penguins in the top left corner of the screen.
View 7 Replies
View Related
Feb 22, 2010
Anybody know how to have Enter key pressed from pressing Ctrl-Shift-X?I need it with Zsh + Konsole + 'Clear & Reset' (Konsole feature).
View 9 Replies
View Related
Sep 22, 2010
My Ubuntu was working perfectly fine until this morning. It is the latest release (10.04 I think) and it is the 64 bit version. This morning I go to my computer and see there are some updates waiting. I install the updates without paying much attention to them. I really do not remember what the updates were. Then Ubuntu asks me to restart so I restart. After restart I get the usual log in screen and I hear the drums. I put in my password, press enter and then the log in screen disappears and I expect to see my desktop. But that does not happen. Instead in a split second after disappearing, the log in screen reappears and I hear the drums again.
At the beginning I thought that I simply forgot my password. But that is unlikely because I have been using the same password for 6 years now. But just in case I tried an incorrect password and I got a different behavior. If I put in an incorrect password, Ubuntu will simply say "authentication failed" and the log in screen will not disappear. When I put in the correct password, the log in screen disappears for a split second (as if my password is correct) but then instead of taking me to the desktop it takes me back to the log in screen and sounds the drums again.
View 9 Replies
View Related
Jan 21, 2010
I am not a new user of linux but the last time I used linux was five years ago.
I am having a hard time using less. It dont want to accept commands immediately. I need to press 'Enter' to accept the command.
Like if I press 'q' to quit, it will echo 'q' and dont do anything. I have to press 'Enter' to make it quit. Same with other commands.
I am using Windows PuTTy 0.60 with ssh to connect to linux machine.
The linux system is: Linux <removed> 2.6.18-53.el5 #1 SMP Wed Oct 10 16:34:19 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
The less version is :
less 394
Copyright (C) 1984-2005 Mark Nudelman
I dont have any problem with vim and more. Only with less.
I have also tried changing the TERM from xterm to vt100. But still the same problem with less.
View 3 Replies
View Related
Jan 22, 2010
I have never in a year had a problem with this d-boot system. Two days ago I tried to boot into ubuntu like every day. It started to load normal, went to the ubuntu logo and paused for about 15 seconds and posted this under the logo:
One or more of the mounts listed in /etc/fstab cannot yet be mounted
/: waiting for /dev/loop0
/tmp: waiting for (null)
/boot: waiting for /host/ubuntu/disks/boot
Press ESC to enter a recovery shell
I have looked everywhere and tried so many things, I can't look any further. All I have been doing for two days is trying to boot this system.
View 8 Replies
View Related
Aug 18, 2010
I'm trying to do exactly this: [URL] the first time i did it, I made it and everything was fine, except I didn't know what "installation size" meant in wubi, so as I selected 3GB, the rest of the partition was left empty and I didn't have enough space for ubuntu. Then I formatted the partition again and reinstalled ubuntu. Since then while it's booting, I get the message Disk boot failure insert system disk and press enter. I tried reinstalling many times, but I still get this message..
View 6 Replies
View Related
Feb 1, 2009
dose any one know the text string to enter to DISABLE ip v6 100% during the install?using the gui installer for fedora 5,6,7,8,9 i have been able to disable this ( uncheck a check box) then set the system up manually for ip4 .the reason is for some reason if ip6 is on during the install ( i have had this problem with all versions of fedora f5 through 9 and now 10)then fedora will never, never, NEVER ever connect to the net .the ip6 lookup kills my cable box, i boot into windows and it can not even connect until i unplug the box for 2 min and plug it back in and get a NEW/renewed ip address .so i do believe that i am going to need to do a text install and disable ip6. But the question is HOW ?
View 3 Replies
View Related
May 13, 2010
Today I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"
View 5 Replies
View Related
Dec 21, 2010
I recently removed Winblows Vista from my laptop and replaced it with Kubuntu 10.10 (I left the recovery partition on there, just in case). When I turn on the computer, the GRUB menu appears, I press enter, then a little flashing underscore appears on the screen in the top left hand corner. After a few seconds, the Kubuntu logo appears and I can log in.But yesterday I replace Kubuntu with Ubuntu 10.10. The Boot process is the same, but the little flashing underscore in the top left hand corner flashes for about 10 seconds longer then Kubuntu 10.10 did, and then a few paragraphs of text appears for a few seconds, then I am logged in automatically.Is this "unusual" boot process anything to worry about, or am I just being a noob.
View 1 Replies
View Related
Oct 19, 2009
When I installed Fedora GNOME I could use my printer fine (But I had to change the recommended driver) Now, I switched to KDE and I plug-in my printer, It automaticly adds it, Now I have to delete it and re-add to fix the small bug... Except when I press "Remove Printer" I get "There was an error during the CUPS operation: 'client-error-forbidden'."
View 1 Replies
View Related
Jan 12, 2011
I am pasting sudo commands without problems as a user (ales in my case) and then immediately the ask the user password.
The keyboard seems to be dead, no keys work, not allowing me to enter the password.
View 6 Replies
View Related
Apr 1, 2011
I have decided to load the OS on a old HP Compaq DX2000 MT to see if its for me before putting it on my main machine.
I loaded Ubuntu version 10.10 last night everything was fine except I could not get my wireless adapter to work, I decided to connect via ethernet to get the latest updates and drivers.
After the updates and restart I now get the non executable memory error. when I enter
/usr/bin/check-bios-nx --verbose
I am told I have NX capabilities and should go to the bios and enable it. There is nothing in
the bios to enable as far as I can see. So I enter the command
sudo rm /etc/update-motd.d/20-cpu-checker
View 3 Replies
View Related
Oct 20, 2009
I am trying to install Fedora 11 from a DVD. Not the live DVD, the full DVD and it hangs constantly. I had to wait 10 minutes for it to Find Storage Devices, 10 minutes to input a root password and now I am waiting for the drive shares to be setup. It's already been 10 minutes. I verified the disk and everything was fine. Why is this taking so long?
View 4 Replies
View Related
Jun 30, 2011
I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.
View 12 Replies
View Related
Feb 14, 2011
I have an ongoing battle with upgrade and/or update. I did a file scan for entries containing ubuntu. There is more than a page of entries that begin 'newtoubuntu.' and say 'broken' in the file type.
View 2 Replies
View Related
Jan 12, 2009
Installing new Intel server S5000VSA (Sapello) motherboard with RAID 1. Downloaded F10 32 bit DVD and run install. Everything works fine and select Samba and all that. Install completes but on reboot get a blank screen.
I know with Windows one has to load the RAID driver off the Intel driver CD, so guess that is the problem. But how do I do this in Fedora? Question: How do I get to select the Intel RAID driver in the install process? There does not seem to be any place to stop and make this selection. I tried selecting the Red Hat and Suze installs on the Intel configuration assistant but it then reboots and that is it. In Windows it would ask to insert the Intel driver CD but that does not happen. So I am stuck. I loaded Fedora some 3 year ago and like it but then it was not on a RAID setup. I created a VMWare install on my desktop and did the same install options and it works. So the DVD seems fine.
View 3 Replies
View Related
Mar 23, 2010
I downloaded the iso for my system (desktop x86 32bit) and I get the computer to open the install menu. I pick english, and then it wont let me select an install option. Arrow keys work, function keys work, even pressing enter gets the cd to spin in the drive, but it wont progress to loading the install files...
View 1 Replies
View Related
Mar 23, 2011
I'm randomly getting 'Continue to wait; or press S to skip mounting or M for manual recovery...' or something like that at boot ((it flashes very quickly)- If I don't press anything, I'm prompted for my password (I configured it to login with password) and the desktop loads...
I'm using Ultimate Edition 2.6.1 -> Ultimate Edition Home
I was using my 1TB hdd to dual-boot linux, windows, and for storage...Yesterday, I imaged the linux partition, and restored it to an approximately 66GB partition I created on a 150GB hdd...Besides the 66GB partition, the rest of the 150GB hdd is 'unallocated space'... That's when the above message started...Below are screenshots of the fstab and partitions as they are now...
View 9 Replies
View Related
Feb 26, 2010
While installing OpenSUSE 11.2 on system with videocard with VGA/DVI outs in most cases work only DVI out. VGA out not work. Need choise what VGA or DVI out must work while installing the system.
I tried to create future request, but a have trouble with that again
At url After describing the problem (entering description) and doing request. Site give me an error "Please enter a description"
View 9 Replies
View Related
Nov 26, 2009
Disappearance of ubuntu screen off and not being able to enter it. To solve this problem we have to we add to Menu List And through the opening of Fedora menu.lst
[code]...
But the most important point that must do it is to decrease 1 of partition. In the sense that the partition (hd0, 3) becomes (hd0, 2).
View 1 Replies
View Related
