I have an ongoing battle with upgrade and/or update. I did a file scan for entries containing ubuntu. There is more than a page of entries that begin 'newtoubuntu.' and say 'broken' in the file type.
View 2 RepliesI am unable to double-click a file of a given type, e.g. .pdf, and have it open in the appropriate application. While some file types have the correct associations, others do not, and I am unable to assign apps for some file types.
An example is Adobe portable document files ending in .pdf. If I right-click on a .pdf in Nautilus, and select "Open with," I get a dialog containing two tabs. One lists applications already associated with that file type, which at present is blank. The other tab seems as if it should allow me to assign an application to that file type, but when I click it, the dialog simply closes suddenly, as if crashing.
What is going on here, and how do I fix it?
(Ubuntu 9.10 64-bit)
Made the following bash script named trimsquote:
Code:
#!/bin/bash
IFS=$'
[code]...
I'm new to Ubuntu . With windows when you install a app it creates a folder in the drive:c under programs : Where is the install folder on Ubuntu ? AND ' with windows ' there is an exe file ' what type of file is like the exe file''' to run ? or the path to run the app ?
View 3 Replies View Related- Press the <Enter> key to begin the installation processisolinux: Disk error 80, AX=42BA, drive 94Boot failed: press a key to retry
View 4 Replies View RelatedIn my system around 73gb(pc-desktop) i have,1 primary partition(windows)-25gb, 1-extended partition(remaining gb) 3 logical partitions were there in (under) extended partition in one of the logical partition is d:drive. in my hard disk d: drive is -/dev/sda5
previosly i was fat -file system , (d:drive-/dev/sda5), i remember i changed the d: drive(d:drive-/dev/sda5) file system to ext4file system ,with following command using terminal
After doing(changing the file system)this one ,i couldnt see the d:drive data
By doing that
1q) Did i reformatted the partition? i think the new filesystem(ext4) has no knowledge of the data that was on it when it had a FAT filesystem.
2q) How to do undo operation,i tried to change the filesystem type to fat/ntfs in terminal using command --sudo mkfs -t FAT /dev/sda5.
Result:its showing text message-'mkfs.FAT: No such file or directory'(not in single quote)
I had very imp data in d:drive
I am copying the file form one directory to another directory using shellscript.
Here i want to get the Mimetype/Content-type of the file.
How to i can get the MimeType.
I'm trying to define the partition table type (I want to set it to msdos) for an automatic installation using preseeding file. (Why? I want to setup a software RAID 1 with two 2TB disks, by default the installer uses gpt partition tabless on those disks, where it's tricky to install grub(2), as there is no mbr, and the root partition is on a md device) During manual installtion it is possible to set the partition table type (by setting debconf priority to low).
[Code]...
Does anyone know what I have to put in my config file so that a msdos partition table will be created Also any other solution is welcome. I just want to have my root partition on a raid 1 and have grub installed, so that it boots up (No other OS is installed on the boxes. Debian squeeze is used)
I have presently a (working) boot dedicated partition, where grub stuff resides, but I want to change it to a common "/boot" folder in the root partition (in a different hdd). For some reason I can't do it. The first thing I did was to copy all the things that are in the boot partition to a boot folder on the root partition. After that, I tried: grub-install /dev/hdc1 (which is odd but it's where the root partition actually is)
When I did it from the linux I have installed on my hdd, it actually did something, I don't remember all the output (except that there was something about it not being able to access hda, which is oddly the dvdrom), but it didn't work. From a live CD, the same command (grub-install /dev/hdc1) is answered with: Could not find device for /boot: Not found or not a block device. From grub's own prompt, the things are more or less the same. First of all, it does not find stage1, even though I did copy the content from the boot partition to a boot folder in the root partition.
I tried to proceed, anyway, with root (hd1,0) and setup (hd1,0) (which is /dev/hdc1, according with the "geometry" info given by grub). "Root" is accepted, but "setup" is answered with: Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type But the files are there. I can't "cat" the menu.lst from grub though, unlike with the actual working boot partition. The same error message. From the terminal, however, it's all there. I tried with /dev/hdc1 both mounted and unmounted, the same message. So, basically I have two questions, I guess:
1 - can I really do this sort of thing running a linux installed on a hdd, rather than a live cd, or is the live cd preferable for some reason?
2 - what am I missing?
(A note that may worth making is that I'm using the soon-to-be deprecated grub version, 0.9 or something, not grub2. I think it shouldn't be a problem since I've installed the system with the old version to begin with, but that may be irrelevant, I don't really know)
I grabbed the new lubuntu 10.10 from [URL] but it turns out I'm having a problem installing it on my netbook (Asus Eee PC 1015PED). While installing, this error pops up:
Quote:
The attempt to mount a file system with type ext4 in SCSI2 (0,0,0), partition #1 (sda) at / failed.You may resume partitioning from the partitioning menu.I'm installing via USB and have selected the option to erase everything and use the full HDD.
Edit: I had Xubuntu installed before.
Unable to install Ubuntu 9.10 on a new internal harddrive. The hardrive contains no operating system. This hardrive is the only drive present in the system.
Whenever the installation trys to mount the ext4 partition the following error appears: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition #1 (sda) at /failed
Iv'e tried over and over to get past this error to no avail.
I have a new Dell R710 dual processor machine I'm trying to install Fedora 11 x86_64 on (all versions I mention in this post are x86_64 bit). I downloaded the cd iso files, burned them to cd (I don't have a DVD burner), then told my machine to boot to the optical drive.
I get a very brief introduction message about ISOLINUX then the monitor refreshes and gives me the following message: "Press the <Enter> key to begin the installation process."
Naturally, I press the Enter key(s) on my keyboard. Nothing happens. I try Alt ASCII combinations that might mimic an Enter key. No dice. ctrl-alt-delete works, however, and the machine reboots.
My checksums for the iso's are perfect, and the install process triggers perfectly on other machines. Just not this one.
After much vain research, I download the Fedora 11 Live-KDE, burn it to CD and try it. It doesn't work - the same thing happens. I tried the net install, and it doesn't work either.
On a lark, I download the Fedora 10 Live KDE iso and burn it to cd. It works perfectly and skips the "Enter" phrase entirely. I take my Fedora 11 Live KDE disc and put it in another machine and it, too, works perfectly, which leads me to believe my cd burns are fine.
I've also used usb creator to create a bootable USB drive. It doesn't ask me to press enter - it just fails with a really arcane IF=0 error (arcane to me, anyway).
So I'm at a loss. I'd like to install Fedora 11 on this machine, but may end up with Fedora 10 or CentOS if I can't figure this out.
Is there some weird BIOS setting somewhere I'm missing? I find it really weird that my fedora 10 cd works, but my fedora 11 cd does not (but my fedora 11 cd works in other machines).
I'm trying to install Fedora 11 (64-bit) but after a small message about ISOLINUX the monitor refreshes and displays the following message: "Press the <Enter> key to begin the installation process." At that point the keyboard dies and I can't go any further. I tried 4 different FC11 dvds, also tried different PS2 and USB keyboards but the problem persists.
How to install FC 10 first and then upgrade to FC11. I tried that as well with no luck. I can install FC10 with no problems but why not FC11?
I have a following problem: Recently my drive with Ubuntu 9.4 has mysteriously stopped working, i.e. when I switch the computer on it informs me that GRUB didn't find the filesystem. Well, I suppose it happens.
First, I though it was due to the drive dying, but I popped it in an external enclosure and HDTune told me the drive was fine. Wanting to recover the files on the drive before reinstalling I first tried to mount it in said external enclosure under Windows (I have Win Ext2 driver installed which used to work just fine). This time, however, drive gets assigned a letter but upon opening it Windows popped up an error saying that the drive was not formatted and whether I would like to format it then.
Unfazed by this streak of failures I tried to mount it under Linux but, alas, to no avail. I might have tried every single -t operator under mount command but it still won't budge and let me mount.
I am writting a script to allow uploading of certain files. I want to limit the files by their filename and mime type, and by making sure the two match up.The first thing I need to do is make sure I've got all the mime types I need added. I have never done this before, but I understand that 'file' (which is what PHP's mime-type finding is based off of) uses magic databases that tell at which point in the file should have signatures of the filetype.
My trouble started when I was unable to determine the filetype of any of my video files. Currently, I have some .MOV and .MP4 files that I am using to test.
I want to be able to play a video file on my pda(Tungsten T5) but from memory the only video file i have seen playable on it was the asf file that is used when it starts up/reboots. I tried other file types in the past that were suggested in maybe a manual or forum or something but they never worked/played. I think it is because of the player installed and i tried installing another player but from memory that didn't install properly or just did not play anything. So if anyone knows of a way to convert files maybe using winff or mencoder i would love that info. I have been googling and have found nothing specific to what i am asking. I do not see anything in winff to convert to asf and cannot remember ever using mencoder.
View 9 Replies View RelatedTrying to do the upgrade through "Software Updates", however because there are no current updates, I cannot click on the "Upgrade" button to begin the upgrade process to FC14.
Is there any other way to do this besides downloading the DVD and installing?
I've had Ubuntu 11.04 installed on my desktop since it's release. Up until an hour ago, it was working fine. I clicked on an update from the update manager, now booting into a graphical mode is completely broken, (the start-up load hangs at 'Check Battery State ... [0k]'). I restarted my computer, and booted into safe mode, and launched the terminal. This all works fine. I then typed :
Code: sudo gdm start into the command prompt, hoping that I would be able to start things manually. Instead, it spat out this: Code:
gdm-binary[230]: WARNING: Unable to load file '/etc/gdm/custom.conf'. No such file or directory.
gdm-binary[230]: WARNING: Unable to find users : no seat-id found.
gdm-binary[230]: WARNING: Gdm Display: display lasted 0.070467 seconds
The last line was printed about 8 times, with slightly different times, before it gave up and failed. Some information which might help, I have Gnome 2, Unity and KDE (not sure which version), installed. My graphics card is the GTX 275, and I have driver the Nvidia driver 275.21. So yeah, I think the update has gone and moved custom.conf somewhere, but I have no idea on how to fix it. I have a graphics programming assignment due on Friday and I would be eternally grateful if I could get this fixed well before then.
Making iPhone apps. a simple process? where do i begin. i have no idea what I'm doing.
View 4 Replies View RelatedKind of like Windows allows you to do. Specifically, I'd like to get Thunderbird to startup in the tray each time I log in.
View 3 Replies View Relatedif I'd a file like this
something
somethine123
begin something end
begin xyz end
somethingelse
and I want to find the strings only between begin and end, exluding begin and end; How can I grep that?
I've been trying to fix this problem for quite a few days now and have done a lot of searching on these forums, Linux Mint Forums and some others Google lead me to and have has some success, but am now stuck.I have posted a thread on this same topic on the Linux Mint Forums, but have had no success (if you want check it out at:URL...Originally I received error messages when trying to update involving certain repositories which couldn't be accessed (because they either didn't exist or had been moved) and I hunted these down and changed or removed them.
I have done much searching, etc. and cannot find any broken packages. I have tried many many different commands which have mostly done nothing.I seem to be in a similar boat to this person: URL...
A while ago, I installed a windows application (on wine) called Max/msp. I have uninstalled it, and removed wine from my system (deleting ~/.wine as well), but now I'm left with some files thinking they are "Max Externals." How do I fix this/restore to the default file types?
View 5 Replies View Relateddo you know of a movie editor for the file type .ogv?
View 1 Replies View RelatedI have some .loc files from geocaching's website. I wrote a special script that takes these files and converts them to my Bushnell GPS format and moves them into the correct folder. Now I'd like to associate a double click with my script. However, the .loc file shows up as "XML Document". yes, it's an XML document, but I only want .loc XML documents to be executed by my script. How can I give .loc files their own "type" so I can give them their own "Open With" application and not mess up every other xml file?
View 2 Replies View RelatedUbuntu 9.10 Karmic Koala.
When I double-click any .theme file I get the error message: "Could not display such-and-such.theme. the location is not a folder."
When I right-click any .theme file there is no option to "Open With", and no "Open With" tab in Properties.
When I create a text file and save it with a random name, I can change the filename extension to wav, jpg, png, txt, or theme, and Properties shows that the OS thinks it is that filetype. But all those filetypes except theme give "Open With" options, and allow me to change the extension again to anything. Once a file has been given the theme extension, it is stuck as a theme file.
any way to make a certain file extension (.etxt) open with a certain jar application (enotes.jar) that uses files with that file extension? i tried (for the custom open command on a .etxt file):
Code:
java -jar /home/me/Programs/enotes.jar "%1" %*
which was proposed (for windows) here: [URL]but it doesn't work when adapted to linux...
How can I get PDF file type to show up in the firefox applications list so I can specify what application to open it with, etc..
View 1 Replies View RelatedIs there a way to set Firefox to place downloaded files in different folders based on the file type?e.g. in my Downloads folder place all .doc files in a sub-folder called ".doc", all .jpgs in a sub-folder called ".jpg"I'd assume there's probably a rule, or a script that can be used to accomplish this, but being a graduate student, I don't have alot of free time to poke around and figure it out myself
View 9 Replies View RelatedI currently using Lucid and I can't connect to the internet in lucid.
View 2 Replies View Related