I have downloaded the Damm small linux iso ,and burned the image to the CD with infrarecorder .But when i try to boot it from the CD ,I get the DSL logo and press enter to boot ,then the computer freezes with two small penguins in the top left corner of the screen.
View 7 RepliesI've been fiddling about with vortexbox (the one before 1.4 I think), for a while. This is a music ripping and server rpm setup using Fedora 11 as the base.
As it was on a test machine, decided to try changing the logical volume sizes of LogVol00 and LogVol02 to fit a few more cd's on 02 before getting a new pc (just to see how it works).
Logged on and opened up the graphic version of lvm (using gnome). Then selected the LogVol02 logical volume, select edit, changed name to LogVol02-Storage, saved and logged out. Rebooted vortexbox since then its been unable to start properly (is this a kernel panic?).
Read up a lot on lvm on the net, have access to Fedora 11 disk 1, so logged on. Eventually managed (I thought to) to change LogVol02-Storage to LogVol02 using lvrename.
However, still refuses to boot completely.
The message it gives is as follows (sort of): Welcome to Fedora Press '1' to enter interactive startup
Setting up Logical Volume Management: 3 logical volume(s) in volume group 'VolGroup00' now active
*** An error occurred during file system check.
*** Droping you to a shell; the system will reboot when you leave the shell.
Give root password for maintenance (or type Control-D to continue):
Loving vortexbox appart from this. Will it be easier just to reinstall everything? If so, is there a way of listing all the changes I've done so I can reproduce (I'm thinking of just looking at all the commands I ran on the CLI).
Otherwise, is there a way of listing all of the commands I ran in terminal and piping them into a file so I can see what I need to do to rebuild after reinstalling?
I'm trying to do exactly this: [URL] the first time i did it, I made it and everything was fine, except I didn't know what "installation size" meant in wubi, so as I selected 3GB, the rest of the partition was left empty and I didn't have enough space for ubuntu. Then I formatted the partition again and reinstalled ubuntu. Since then while it's booting, I get the message Disk boot failure insert system disk and press enter. I tried reinstalling many times, but I still get this message..
View 6 Replies View RelatedI bought a t770.uk HP desktop PC, which came without a Hard drive as the pervious owner had removed it for security reasons. A week later I got a hold of a brand new - out of an anti-static sealed bag - compatible Western Digital Caviar SE 80GB SATA150 7200 HDD, and installed it as directed by my t770.uk manual. Up until now, things looked to be on a roll. As I don't have any windows OS, I figured Ubunutu would be the way to go (and it certainly is from what I've heard and read about it. I can't wait!).
So I sent off for a CD and it popped through my mail a few weeks back. The problem that I am having is after booting past a very brief view of the HP POST screen, the screen goes black with the error "Disc boot failure-insert system disk and press enter". I've tried placing the Ubuntu disc in (assuming it is asking for that? An OS disc) and restarting, and changing the boot order around, but no matter what I do the error persists and I can't install Ubuntu. I really want to get this PC running with Ubuntu.
I am not a new user of linux but the last time I used linux was five years ago.
I am having a hard time using less. It dont want to accept commands immediately. I need to press 'Enter' to accept the command.
Like if I press 'q' to quit, it will echo 'q' and dont do anything. I have to press 'Enter' to make it quit. Same with other commands.
I am using Windows PuTTy 0.60 with ssh to connect to linux machine.
The linux system is: Linux <removed> 2.6.18-53.el5 #1 SMP Wed Oct 10 16:34:19 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
The less version is :
less 394
Copyright (C) 1984-2005 Mark Nudelman
I dont have any problem with vim and more. Only with less.
I have also tried changing the TERM from xterm to vt100. But still the same problem with less.
Anybody know how to have Enter key pressed from pressing Ctrl-Shift-X?I need it with Zsh + Konsole + 'Clear & Reset' (Konsole feature).
View 9 Replies View RelatedMy Ubuntu was working perfectly fine until this morning. It is the latest release (10.04 I think) and it is the 64 bit version. This morning I go to my computer and see there are some updates waiting. I install the updates without paying much attention to them. I really do not remember what the updates were. Then Ubuntu asks me to restart so I restart. After restart I get the usual log in screen and I hear the drums. I put in my password, press enter and then the log in screen disappears and I expect to see my desktop. But that does not happen. Instead in a split second after disappearing, the log in screen reappears and I hear the drums again.
At the beginning I thought that I simply forgot my password. But that is unlikely because I have been using the same password for 6 years now. But just in case I tried an incorrect password and I got a different behavior. If I put in an incorrect password, Ubuntu will simply say "authentication failed" and the log in screen will not disappear. When I put in the correct password, the log in screen disappears for a split second (as if my password is correct) but then instead of taking me to the desktop it takes me back to the log in screen and sounds the drums again.
I have never in a year had a problem with this d-boot system. Two days ago I tried to boot into ubuntu like every day. It started to load normal, went to the ubuntu logo and paused for about 15 seconds and posted this under the logo:
One or more of the mounts listed in /etc/fstab cannot yet be mounted
/: waiting for /dev/loop0
/tmp: waiting for (null)
/boot: waiting for /host/ubuntu/disks/boot
Press ESC to enter a recovery shell
I have looked everywhere and tried so many things, I can't look any further. All I have been doing for two days is trying to boot this system.
Today, I was downloading some stuff from online. I left for a few minutes and came back to find that someone had hit my loose power cord, causing the computer to restart. When I completed the reboot (It always says "Insert system disk and press enter" after checking CD drives), and had it load OpenSuSE 11.3 Failsafe (Regular won't work for me), it loaded into Teal (BASH, Command Prompt, Kommand, whatever you want to call it). At first, I thought maybe I screwed up and told it to load into that. But, I tried again, and it did the same. I tried using Non-Failsafe, and got the same results. I am able to edit, add, or remove programs from the Linux partition, though.
View 3 Replies View RelatedI downloaded the appropriate iso for the ps3 from here:[url]
(specifically: ubuntu-10.04-desktop-powerpc+ps3.iso via torrent)
Installation runs smoothly up until 100% and then i am prompted to reboot.
When i click reboot, i get info on some daemons(?) shutting down(i think) and then the cd is automatically ejected and i am prompted to press enter.
So far, so good. After i hit enter though, i get a large amount of various read errors and finally a segmentation fault. The system just hangs there :/.
I forcibly reboot the PS3, and then i am greeted with the pack of errors that are shown in the screenshot.
I have just installed Fedora 12. After my pc boots up, the message:"Press any key to ent This continues to appeuntil I press any key and then the GRUB boot menu appears:Fedora (2.6.31.6-145.fc12.i686.PAE)BootIf I choose "Fedora", it boots properly into the login screen.What do I need to do to have the system boot directly into the log in screen, without going into this loop, boot menu and having to choose what to boot?
View 3 Replies View Related- Press the <Enter> key to begin the installation processisolinux: Disk error 80, AX=42BA, drive 94Boot failed: press a key to retry
View 4 Replies View RelatedI have a new Dell R710 dual processor machine I'm trying to install Fedora 11 x86_64 on (all versions I mention in this post are x86_64 bit). I downloaded the cd iso files, burned them to cd (I don't have a DVD burner), then told my machine to boot to the optical drive.
I get a very brief introduction message about ISOLINUX then the monitor refreshes and gives me the following message: "Press the <Enter> key to begin the installation process."
Naturally, I press the Enter key(s) on my keyboard. Nothing happens. I try Alt ASCII combinations that might mimic an Enter key. No dice. ctrl-alt-delete works, however, and the machine reboots.
My checksums for the iso's are perfect, and the install process triggers perfectly on other machines. Just not this one.
After much vain research, I download the Fedora 11 Live-KDE, burn it to CD and try it. It doesn't work - the same thing happens. I tried the net install, and it doesn't work either.
On a lark, I download the Fedora 10 Live KDE iso and burn it to cd. It works perfectly and skips the "Enter" phrase entirely. I take my Fedora 11 Live KDE disc and put it in another machine and it, too, works perfectly, which leads me to believe my cd burns are fine.
I've also used usb creator to create a bootable USB drive. It doesn't ask me to press enter - it just fails with a really arcane IF=0 error (arcane to me, anyway).
So I'm at a loss. I'd like to install Fedora 11 on this machine, but may end up with Fedora 10 or CentOS if I can't figure this out.
Is there some weird BIOS setting somewhere I'm missing? I find it really weird that my fedora 10 cd works, but my fedora 11 cd does not (but my fedora 11 cd works in other machines).
I'm trying to install Fedora 11 (64-bit) but after a small message about ISOLINUX the monitor refreshes and displays the following message: "Press the <Enter> key to begin the installation process." At that point the keyboard dies and I can't go any further. I tried 4 different FC11 dvds, also tried different PS2 and USB keyboards but the problem persists.
How to install FC 10 first and then upgrade to FC11. I tried that as well with no luck. I can install FC10 with no problems but why not FC11?
I recently removed Winblows Vista from my laptop and replaced it with Kubuntu 10.10 (I left the recovery partition on there, just in case). When I turn on the computer, the GRUB menu appears, I press enter, then a little flashing underscore appears on the screen in the top left hand corner. After a few seconds, the Kubuntu logo appears and I can log in.But yesterday I replace Kubuntu with Ubuntu 10.10. The Boot process is the same, but the little flashing underscore in the top left hand corner flashes for about 10 seconds longer then Kubuntu 10.10 did, and then a few paragraphs of text appears for a few seconds, then I am logged in automatically.Is this "unusual" boot process anything to worry about, or am I just being a noob.
View 1 Replies View RelatedSucceeded in connecting to internet using my wll phone. I can now connect using 'wvdial' command in root terminal. But I want to connect through terminal. I tried 'sudo wvdial' command. Then I am asked for my password. But I cannot type my password there. When I type, nothing appears on the terminal window. Ofcourse there's no problem with my keyboard.
View 5 Replies View RelatedI have ks.cfg and file.iso burned to a DVD. Both files are at the root of the DVD. Besides that, I also created a folder and keep some drivers in the folder.
I inserted the CD and reboot the server ( which already has a red hat 5.3 that I installed before, I want to erase it using kick start ).
Howver, I just can't get into the much said "boot prompt".
Do we need to press certain hot key during certain stage of reboot?
can I change the debian logo on left-top with a my personal logo?
Edit: i use Debian Squeeze 6.0.2
I'm randomly getting 'Continue to wait; or press S to skip mounting or M for manual recovery...' or something like that at boot ((it flashes very quickly)- If I don't press anything, I'm prompted for my password (I configured it to login with password) and the desktop loads...
I'm using Ultimate Edition 2.6.1 -> Ultimate Edition Home
I was using my 1TB hdd to dual-boot linux, windows, and for storage...Yesterday, I imaged the linux partition, and restored it to an approximately 66GB partition I created on a 150GB hdd...Besides the 66GB partition, the rest of the 150GB hdd is 'unallocated space'... That's when the above message started...Below are screenshots of the fstab and partitions as they are now...
i was just wondering if there was any way to make it only boot ubuntu from pressing a button at startup like f11 or something instead of coming up with a menu asking me to choose which operating system to boot.
View 2 Replies View RelatedReboot and select proper boot device or insert boot media in selected boot device and press a key. I got this error after: Reducing my Windows 7 partition by about 100gb. Creating a new partition (100gb) and copying my Ubuntu partition (10gb) to the new partition. After it was copied, and pasted, the original partition was deleted. I now had two partitions a new 100gb Ubuntu partition and a 600gb (or so) Windows 7 partition.
All of this was done using a bootable USB with Ubuntu 10.10 and GParted partition editor. Now when I boot I get the "Reboot and select proper boot device or insert boot media in selected boot device and press a key." error.
When I boot Ubuntu 10.04 Lucid Lynx my computer goes through the POST check and all that then boots from the HDD When it's booting the OS all I see is a black screen with "_" flashing on it (without quotes) then a few seconds after I see the Ubuntu logo then the log-in screen appears
View 6 Replies View RelatedI installed Slackware 13.0.
During boot I see a penguin in the upper left top of my screen. This logo takes up about 10 lines of my screen and I don't want it.
I do want to keep my 132x50 lines mode tough, but no penguin.
How do I do that? I mean, SOMEHOW the penguin most have gotten there, where first normal text was displayed.
Debian squeeze, with the official nvidia driver installed.
It is working perfect, but for some reason the nvidia logo does not show up on boot. OK, it is not a critical problem, but I would still like it to show up anyway.
Running gnome, gdm.
Config file: [URL]
I was able to login openSuSe/KDE. Now, every time I enter my username and password the system hangs half-way through the Boot Logo.
View 4 Replies View RelatedI got a problem. At the day of New YEar, i got a virus, that my antivirus big time. When i started Windows, i instantly got BSoD. I managed to format my HDD, and now i wanna try to install Ubuntu. It has been working before, but after an update, I can't get further then the logo in the boot process. Now, I don't have any OS. Ubuntu & Kubuntu both just gives me the logo/loading screen, and then goes black..
windows 7 also just goies to "Starting windows"... Prretty annoying.
Think i got 3 GB RAM, 950gb HDD, and 2x 128 MB ATI X-Fire video.
Firstly when I first installed Ubuntu on my machine, the bootscreen logo was small and high resolution, and it looked nice, however as I started using Ubuntu I must have done something for it to change to large and low resolution.
I try the live cd again and that one is normal, so it must be my settings.. and also when I am shutting down, the screen shows some messages I can't read because it's kind of fast, and the messages are kind of low res too.
How can I change Ubuntu logo at boot, I am Using Ubuntu Lucid 10.04
View 2 Replies View RelatedI have currently installed the ubuntu 11.04 natty narwhal edition through the wubi installer alongside windows 7. I wanted to just check out what the kde environment had to offer differently from the default desktop environment which is gnome unity environment.
I installed the kde environment using some sudo command given by google. After using kde environment for a few hours, I just began to feel, I liked the default gnome environment better (in classic mode) as compared to kde as I was more used to the former.
So I uninstalled kde with another sudo command which I got by googling. At the final step of the uninstallation, I admit I am not sure whether what I did was right or wrong. There was sth related to 'daemon' that popped up eventually and I chose yes for that and kde was uninstalled successfully or atleast that's what I thought.
But to my horror, when i tried rebooting my laptop to ubuntu gnome, the blue coloured kubuntu logo was popping once again and I had to go back to the synaptic package manager and delete sth called the 'plymouth' package to remove the kubuntu logo.
Now after doing all these, when I tried booting ubuntu, I was not able to get to the gnome login screen. The screen was just stuck with the ubuntu logo and the process bar blinking and gnome never started.
When I pressed the Esc key to check out what was happening from behind, I could see that some processes were being checked and there was a [ok] after everything and there was a [FAIL] next to "starting CPU interrupts balancing daemon". And the terminal screen ended with "stopping system V run level compatibility". I am not sure if this might be the root cause of blocking the boot-up. But I couldn't get a screenshot of those intermittent terminal screens as I was not in a position to type in any commands such as fbgrab which can be used to grab a screenshot of the terminal screen.
Eventually after intense googling, I figured how to manually configure gnome to start up. I pressed the Cnt + Alt +F1 as soon as the white ubuntu logo popped up and after logging in into my ubuntu account through the terminal interface, I typed in the following things:
And then voila I got the gnome login screen. I temporarily heaved a sigh of relief. (by the way I saw something flash quickly on the terminal moments before it went to the gnome login screen like "you need not init this way or sth"..I just couldn't catch sight of it properly as it flashed only for a few moments)
But I am not satisfied. Obviously there might be a way to set this problem right isn't it? Kindly someone pls throw some light on this issue. I want gdm to be automatically activated during boot. Its a big pain to manually configure it everytime I boot. Is it possible to do a windows restore to set the ubuntu right? But I saw in some forums mention that something called the boot.ini will botch up if we perform a system restore in win 7.
Method that does not involve uninstalling ubuntu and reinstalling it. This is because I have done a lot of tweaks, optimisations and installed lot of apps in it. I do not have a system image backup as well. So it will be a nightmare to do all these things over and over again. The mistake or rather the drawback from my side is I just have my laptop alone and do not have another standalone desktop to experiment with linux.
Installing 11.04 from a boot CD and after the ubuntu logo it stops and says 'can not mount /dev/loop0 (cdrom/casper/filesystem.squashft) on //filesystem.squashfs'
Same problem with 10.04. Been working on this since the 14th. Did miltible downloads and burns and setup the hard drive in different ways and still nothing works.