Trying to do the upgrade through "Software Updates", however because there are no current updates, I cannot click on the "Upgrade" button to begin the upgrade process to FC14.
Is there any other way to do this besides downloading the DVD and installing?
I had a FC13 box which I ran a yum update which obviously does updates to the packages installed. My issue is that its tried to upgrade the kernel to FC14 and that has toasted by install. now when the box boots up I get this on the screen.
[ 1.741672] Kernel Panic - not syncin: VFS: unable to mount foot fs on unknown -block(0,0)
[ 1.741715] Pid: 1, comm: swapper Not tainted 2.6.35.12-90.fc.x86_64 #1
[ 1.741754] Call Trace:
[ 1.741789] [<ffffffff81468d6f> panic+0x8b/0x10d
there are a few more lines like te last one. I've tried a rescue disk but no good. is my box toasted for good? I've used a live cd and can still the data on the box, is there any way to resue this situation? or is it run live cd backup the data and do fresh install?
After doing an upgrade from FC14 to FC15, I then updated the packages by doing:
yum update yum
yum clean all
yum --releasever=15 --disableplugin=presto distro-sync
I then get the following voluminous list of issues (148 pre-existing rpmdb problems). I've done an rpm --rebuilddb but no help.
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
libclutter-gtk-0.10.so.0()(64bit) is needed by gthumb-2.12.3-2.fc15.x86_64
Please report this error in [URL]
Found 148 pre-existing rpmdb problem(s), 'yum check' output follows:
ImageMagick-c++-6.6.4.1-15.fc14.x86_64 has missing requires of ImageMagick = ('0', '6.6.4.1', '15.fc14')
akonadi-1.5.3-1.fc14.x86_64 has missing requires of libboost_program_options-mt.so.1.44.0()(64bit)
alchemist-1.0.37-8.fc12.x86_64 has missing requires of python(abi) = ('0', '2.6', None) .....
Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx-2011-05-27-10-30qO4br9.yumtx
Well, it appears that downloading and installing libclutter-gtk-0.10.so.0 seemed to fix all the subsequent yum error messages, and I was able to install all the packages.
Dell Studio 1555 (Wireless WLAN 1397 Half MiniCard (4312bg)) I'd tried
Code:
# akmods --force
5.100.82.38-1-for-2.6.38.6-27.fc15.i686.PAE.failed.log is attached. How to build akmods?
My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
- Press the <Enter> key to begin the installation processisolinux: Disk error 80, AX=42BA, drive 94Boot failed: press a key to retry
View 4 Replies View RelatedJust trying my first live upgrade but hit an issue with not being able to import the GPG key for FC14:
[root@jahama ~]# rpm --import https://fedoraproject.org/static/97A1071F.txt error: https://fedoraproject.org/static/97A1071F.txt: import failed. I downloaded the key to a file and had the same error so I know I haven't mistyped anything. What have I missed and what can I do to resolve it?
after upgrading to FC14, i'm getting this when I run emacs file.sh:
GLib-GIO:ERROR:gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL)
Fatal error (6)Aborted (core dumped) This only happen when i'm logged in as root, on the Terminal session. As a regular user, or launching emacs from task bar icon don't happen.
I have used preupgrade to moved from fc14 to fc15. With fc14 I had my two usb 3.0 ports working. However, with fc15 my usb 3.0 ports are disabled. I have read the instruction at the common fc15 bugs doc and removed the kernel parameter xhci.enable=1 and also erased the file /etc/pm/config.d/xhci. Still the usb 3.0 ports are not working. I am using kernel 2.6.38.6-26.rc1.fc15.x86_64. I cannot use the 2.6.38.6-27.fc15.x86_64 since there no nvidia drivers for it.
View 5 Replies View Relatedas a normal user when I click logout from a KDE session nothing happens and I can't re-launch logout again, shutdown is doing the same.I have just upgraded to fc14 from fc13 yesterday tried to delete .kde folder and it has not been succesful tried to create another user and log to kde session and the new user also failed to logout or shutdown Root user is able to logout and shutdown I have no probs on GNOME for root or users.
View 1 Replies View RelatedI'm trying to install Fedora 11 (64-bit) but after a small message about ISOLINUX the monitor refreshes and displays the following message: "Press the <Enter> key to begin the installation process." At that point the keyboard dies and I can't go any further. I tried 4 different FC11 dvds, also tried different PS2 and USB keyboards but the problem persists.
How to install FC 10 first and then upgrade to FC11. I tried that as well with no luck. I can install FC10 with no problems but why not FC11?
After upgrade my fedora to FC14, my evolution stops to fetch mail from my pop accounts and even for my imap accounts.
Bellow the output of [fred_m@madeira ~]$ evolution --debug=evo.debug.txt
Code:
The error reported when evolution try to fetch emails is:
Code:
I already tried this options, but no success.
yum reinstall evolution*
and
yum downgrade evolution*
I just upgraded from FC 13 to FC 14. I run an ssh server on a port in the 3000s (call it 3xxx, to protect the innocent). When I try to start sshd with the "Port 3xxx" option in sshd_conf, I get the following error in /var/log/secure
sshd[5104]: error: Bind to port 3xxx on 0.0.0.0 failed: Permission denied.
sshd[5104]: error: Bind to port 3xxx on : : failed: Permission denied.
I did not use to have this problem in FC 13. how I can give sshd the necessary permissions now?
Just upgraded from FC14 to FC15 but YUM is bust, I get the errors of: Could not retrieve mirrorlist... Tried checking the my fedora.repo and fedora-updates.repo and they are all fine and even added in entries into my host file but I still getting the error, am I missing something simple?
View 10 Replies View RelatedI'm attempting to install lFedora 10 from a live cd. I already finished the installation process. But when I reboot to finish the post installation information I can't click the forward button to continue because the screen resolution is to low on my LCD. I can't see the forward button to click in the lower right hand corner. I found out if I just hit the enter button I got through the "Welcome" and "License Information" part but when I get to the "Create User" part after I Confirm my password the pressing the enter button doesn't work. And of course I can't see the "Forward" button to click. Is there some way to go in text mode?
View 1 Replies View RelatedI have a laptop that runs Karmic. I want to do the upgrade to 10.04; however, when I use the update utility to update, I do not get the upgrade button to appear.I have checked settings and I should receive upgrade offers on long term supported upgrades to Ubuntu.
View 2 Replies View RelatedI'm on a fully updated and upgraded 9.10, and when I do update-manager -d, I don't get the button to do an upgrade to 10.04! What could cause this? I've tried the -d, -c, --check-dist-upgrades, --devel-release, -p, --proposed, and --dist-upgrade. I'm completely up to date on 9.10, but I want to upgrade to 10.04!
View 7 Replies View RelatedI am currently using 10.04 and I want to upgrade to 10.10 but no upgrade button is appearing on the update manager. I had already installed all updates and the settings was already changed to show normal distribution releases.
View 1 Replies View RelatedI just upgraded from F11 to F12. Everything seems to be nice except mouse. The mouse buttons (both left and right, except middle one) are accidently frozen for some times. It could happen when opening a new tab in Firefox, launching a program, opening a new windows. I cannot click anywhere but can use mouse wheel. I have to log off/ log in and it becomes normal. It does not happen so frequently (around 3-4 hours) but it is really annoying.
View 2 Replies View RelatedI tried to upgrade from Fedora 8 to Fedora 12, but after preupgrade got everything ready I rebooted. Anaconda searched for storage devices and then said "No upgrade root found". What can i do to continue the upgrade manually?
View 1 Replies View Relatedevery time i click or open or move a window it freezes for several seconds. system monitor shows at this time the process Xorg is using 100% cpu.it never drops down below 40%, even at idle.my system is amd 64 4000+ 3gb ram and ati 3650 HD video.i have kubuntu 64 10.10 with all the updates and default ati drivers.
View 6 Replies View RelatedI keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
In checking after upgrading with Preupgrade fromFC14 to FC15 here I noticed te yuom seems to show the wrong repos. How do I correct this?
yum clean all
Loaded plugins: downloadonly, fastestmirror, refresh-packagekit, security
Cleaning repos: adobe-linux-i386 fedora updates
Cleaning up Everything
[code].....
I'm starting to bump into crusty software in Lenny and am looking to upgrade to Squeeze. However, there's no release notes yet and Googling for upgrade directions yields all kinds of variations, some of which talk about "interesting" issue. Thus, my questions:
1. How hard/messy is the Lenny to Squeeze upgrade at this time?
2. Where can I find straightforward, clear directions on how to upgrade?
For quite some time, I just stayed on testing and incrementally upgraded on a regular basis, but stopped after Lenny came out because security support was suspended. Now I'd like to climb back on that train.FWIW, I originally installed Slink in 1999 and haven't reinstalled from scratch since, despite several generations of hardware upgrades.
I just upgraded from F12 to F13 and the result is a mess. From F11 to F12, I*used preupgrade and it worked flawlessly. This time, the process ended on a blank screen. So, I downloaded the DVD and I suppose the files downloaded by preupgarde were used as there were almost no connections to the net during the upgrade process. The problem now is that apparently almost all the FC12 files are still on my system:
rpm -qa | grep fc12
telepathy-stream-engine-0.5.11-1.fc12.x86_64
pbm2l2030-1.4-5.fc12.x86_64
keyutils-libs-1.2-6.fc12.x86_64
apr-util-ldap-1.3.10-1.fc12.x86_64
iwl4965-firmware-228.61.2.24-2.fc12.noarch
rdiff-backup-1.2.8-3.fc12.x86_64
[Code]...
Of course, as I said, the previous upgrade went flawlessly and I didn't check what happened on the system with the rpm and locate commands but I doubt is looked that bad. Seeing what kind of mess my system was turned into, I now worry about the next upgrade.
Making iPhone apps. a simple process? where do i begin. i have no idea what I'm doing.
View 4 Replies View RelatedI upgraded the KDE version on a new installation of 11.1 on another computer and everything went fine. But today I tried upgrading my computer from 4.2 to 4.3.5 with the one click installer, and in addition to having many dependency issues that I thought I got figured out, everything is messed up on my desktop. I still have the 4.2 panel, and my background is messed up (the background I had set has been replaced with a checker pattern), the lizard icon for the application menu is just a grey circle with a play button, all of my icons and my desktop folder that used to be on the desktop are gone, and nothing is showing in the system tray.
View 4 Replies View RelatedI am trying to upgrade from 9.10 to 10.04 beta. I tried ALT-F2 & ``update - manager -d'' but when Upate Manager opened, it did not give me the option of upgrading to 10.04 beta.
View 2 Replies View RelatedI'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.
If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager
The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.
On this step(Picture down) Im unable to click "Forward" button, and finish the installation.
View 2 Replies View Related