Fedora :: Boot Sequence Of 11 Using Lvm - Message - Press '1' To Enter Interactive Startup ?
Jun 15, 2010
I've been fiddling about with vortexbox (the one before 1.4 I think), for a while. This is a music ripping and server rpm setup using Fedora 11 as the base.
As it was on a test machine, decided to try changing the logical volume sizes of LogVol00 and LogVol02 to fit a few more cd's on 02 before getting a new pc (just to see how it works).
Logged on and opened up the graphic version of lvm (using gnome). Then selected the LogVol02 logical volume, select edit, changed name to LogVol02-Storage, saved and logged out. Rebooted vortexbox since then its been unable to start properly (is this a kernel panic?).
Read up a lot on lvm on the net, have access to Fedora 11 disk 1, so logged on. Eventually managed (I thought to) to change LogVol02-Storage to LogVol02 using lvrename.
However, still refuses to boot completely.
The message it gives is as follows (sort of): Welcome to Fedora Press '1' to enter interactive startup
Setting up Logical Volume Management: 3 logical volume(s) in volume group 'VolGroup00' now active
*** An error occurred during file system check.
*** Droping you to a shell; the system will reboot when you leave the shell.
Give root password for maintenance (or type Control-D to continue):
Loving vortexbox appart from this. Will it be easier just to reinstall everything? If so, is there a way of listing all the changes I've done so I can reproduce (I'm thinking of just looking at all the commands I ran on the CLI).
Otherwise, is there a way of listing all of the commands I ran in terminal and piping them into a file so I can see what I need to do to rebuild after reinstalling?
View 2 Replies
ADVERTISEMENT
Nov 9, 2009
I've sucessfully installed Fedora 11 into a SunVirtualBox machine, but I would like to elimate from the boot sequence the GUI Startup. If I need it I could invoke the GUI from the command line. How I coud get this?
View 5 Replies
View Related
Sep 4, 2010
I have downloaded the Damm small linux iso ,and burned the image to the CD with infrarecorder .But when i try to boot it from the CD ,I get the DSL logo and press enter to boot ,then the computer freezes with two small penguins in the top left corner of the screen.
View 7 Replies
View Related
Aug 18, 2010
I'm trying to do exactly this: [URL] the first time i did it, I made it and everything was fine, except I didn't know what "installation size" meant in wubi, so as I selected 3GB, the rest of the partition was left empty and I didn't have enough space for ubuntu. Then I formatted the partition again and reinstalled ubuntu. Since then while it's booting, I get the message Disk boot failure insert system disk and press enter. I tried reinstalling many times, but I still get this message..
View 6 Replies
View Related
Jan 7, 2010
I bought a t770.uk HP desktop PC, which came without a Hard drive as the pervious owner had removed it for security reasons. A week later I got a hold of a brand new - out of an anti-static sealed bag - compatible Western Digital Caviar SE 80GB SATA150 7200 HDD, and installed it as directed by my t770.uk manual. Up until now, things looked to be on a roll. As I don't have any windows OS, I figured Ubunutu would be the way to go (and it certainly is from what I've heard and read about it. I can't wait!).
So I sent off for a CD and it popped through my mail a few weeks back. The problem that I am having is after booting past a very brief view of the HP POST screen, the screen goes black with the error "Disc boot failure-insert system disk and press enter". I've tried placing the Ubuntu disc in (assuming it is asking for that? An OS disc) and restarting, and changing the boot order around, but no matter what I do the error persists and I can't install Ubuntu. I really want to get this PC running with Ubuntu.
View 9 Replies
View Related
Jul 15, 2010
I installed 10.04, and now i cant get back to windows. I have Ubuntu on one hard drive and windows on the other one. When i try to boot up, unless i go to the boot menu and select the hard drive with Ubuntu on it i get the message boot-mgr is missing, press Ctr - Alt - Del to restart.
View 9 Replies
View Related
Feb 20, 2011
My problem is: One of my services has failed to start. All I need is just go into interactive startup and ignore that service. The system is encrypted as LUKS. I press 'i' before and after entering the phrase (it asked me "Password for filesystem"). But interactive startup seems not working. All the services go to start without my permission. I mean there is no question such as "Start XXX [Y/N]?"
In the past I used CentOS for some months, and interactive startup (by pressing 'i' on boot time) was fine. I could allow or not what service should be started.
I have googled and found these:
[URL]
View 2 Replies
View Related
Jun 14, 2011
In interactive mode (in Octave, gnuplot, R, etc.) I occasionally press Control + z by mistake. This pauses the program and kicks me back to the terminal.Is it possible to re-enter the original interactive mode (with all the stored variables)?
To reproduce:
~> octave
octave:1> a = [1:10];
octave:2> ^Z
[code].....
How can I recover my session with the variable a defined?
View 2 Replies
View Related
Dec 9, 2009
I have just installed Fedora 12. After my pc boots up, the message:"Press any key to ent This continues to appeuntil I press any key and then the GRUB boot menu appears:Fedora (2.6.31.6-145.fc12.i686.PAE)BootIf I choose "Fedora", it boots properly into the login screen.What do I need to do to have the system boot directly into the log in screen, without going into this loop, boot menu and having to choose what to boot?
View 3 Replies
View Related
Jul 6, 2009
- Press the <Enter> key to begin the installation processisolinux: Disk error 80, AX=42BA, drive 94Boot failed: press a key to retry
View 4 Replies
View Related
Jul 22, 2009
I have a new Dell R710 dual processor machine I'm trying to install Fedora 11 x86_64 on (all versions I mention in this post are x86_64 bit). I downloaded the cd iso files, burned them to cd (I don't have a DVD burner), then told my machine to boot to the optical drive.
I get a very brief introduction message about ISOLINUX then the monitor refreshes and gives me the following message: "Press the <Enter> key to begin the installation process."
Naturally, I press the Enter key(s) on my keyboard. Nothing happens. I try Alt ASCII combinations that might mimic an Enter key. No dice. ctrl-alt-delete works, however, and the machine reboots.
My checksums for the iso's are perfect, and the install process triggers perfectly on other machines. Just not this one.
After much vain research, I download the Fedora 11 Live-KDE, burn it to CD and try it. It doesn't work - the same thing happens. I tried the net install, and it doesn't work either.
On a lark, I download the Fedora 10 Live KDE iso and burn it to cd. It works perfectly and skips the "Enter" phrase entirely. I take my Fedora 11 Live KDE disc and put it in another machine and it, too, works perfectly, which leads me to believe my cd burns are fine.
I've also used usb creator to create a bootable USB drive. It doesn't ask me to press enter - it just fails with a really arcane IF=0 error (arcane to me, anyway).
So I'm at a loss. I'd like to install Fedora 11 on this machine, but may end up with Fedora 10 or CentOS if I can't figure this out.
Is there some weird BIOS setting somewhere I'm missing? I find it really weird that my fedora 10 cd works, but my fedora 11 cd does not (but my fedora 11 cd works in other machines).
View 11 Replies
View Related
Jan 20, 2010
I'm trying to install Fedora 11 (64-bit) but after a small message about ISOLINUX the monitor refreshes and displays the following message: "Press the <Enter> key to begin the installation process." At that point the keyboard dies and I can't go any further. I tried 4 different FC11 dvds, also tried different PS2 and USB keyboards but the problem persists.
How to install FC 10 first and then upgrade to FC11. I tried that as well with no luck. I can install FC10 with no problems but why not FC11?
View 7 Replies
View Related
Feb 22, 2010
Anybody know how to have Enter key pressed from pressing Ctrl-Shift-X?I need it with Zsh + Konsole + 'Clear & Reset' (Konsole feature).
View 9 Replies
View Related
Sep 22, 2010
My Ubuntu was working perfectly fine until this morning. It is the latest release (10.04 I think) and it is the 64 bit version. This morning I go to my computer and see there are some updates waiting. I install the updates without paying much attention to them. I really do not remember what the updates were. Then Ubuntu asks me to restart so I restart. After restart I get the usual log in screen and I hear the drums. I put in my password, press enter and then the log in screen disappears and I expect to see my desktop. But that does not happen. Instead in a split second after disappearing, the log in screen reappears and I hear the drums again.
At the beginning I thought that I simply forgot my password. But that is unlikely because I have been using the same password for 6 years now. But just in case I tried an incorrect password and I got a different behavior. If I put in an incorrect password, Ubuntu will simply say "authentication failed" and the log in screen will not disappear. When I put in the correct password, the log in screen disappears for a split second (as if my password is correct) but then instead of taking me to the desktop it takes me back to the log in screen and sounds the drums again.
View 9 Replies
View Related
Jan 21, 2010
I am not a new user of linux but the last time I used linux was five years ago.
I am having a hard time using less. It dont want to accept commands immediately. I need to press 'Enter' to accept the command.
Like if I press 'q' to quit, it will echo 'q' and dont do anything. I have to press 'Enter' to make it quit. Same with other commands.
I am using Windows PuTTy 0.60 with ssh to connect to linux machine.
The linux system is: Linux <removed> 2.6.18-53.el5 #1 SMP Wed Oct 10 16:34:19 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
The less version is :
less 394
Copyright (C) 1984-2005 Mark Nudelman
I dont have any problem with vim and more. Only with less.
I have also tried changing the TERM from xterm to vt100. But still the same problem with less.
View 3 Replies
View Related
Jan 22, 2010
I have never in a year had a problem with this d-boot system. Two days ago I tried to boot into ubuntu like every day. It started to load normal, went to the ubuntu logo and paused for about 15 seconds and posted this under the logo:
One or more of the mounts listed in /etc/fstab cannot yet be mounted
/: waiting for /dev/loop0
/tmp: waiting for (null)
/boot: waiting for /host/ubuntu/disks/boot
Press ESC to enter a recovery shell
I have looked everywhere and tried so many things, I can't look any further. All I have been doing for two days is trying to boot this system.
View 8 Replies
View Related
Jan 7, 2011
Today, I was downloading some stuff from online. I left for a few minutes and came back to find that someone had hit my loose power cord, causing the computer to restart. When I completed the reboot (It always says "Insert system disk and press enter" after checking CD drives), and had it load OpenSuSE 11.3 Failsafe (Regular won't work for me), it loaded into Teal (BASH, Command Prompt, Kommand, whatever you want to call it). At first, I thought maybe I screwed up and told it to load into that. But, I tried again, and it did the same. I tried using Non-Failsafe, and got the same results. I am able to edit, add, or remove programs from the Linux partition, though.
View 3 Replies
View Related
May 3, 2010
I downloaded the appropriate iso for the ps3 from here:[url]
(specifically: ubuntu-10.04-desktop-powerpc+ps3.iso via torrent)
Installation runs smoothly up until 100% and then i am prompted to reboot.
When i click reboot, i get info on some daemons(?) shutting down(i think) and then the cd is automatically ejected and i am prompted to press enter.
So far, so good. After i hit enter though, i get a large amount of various read errors and finally a segmentation fault. The system just hangs there :/.
I forcibly reboot the PS3, and then i am greeted with the pack of errors that are shown in the screenshot.
View 5 Replies
View Related
Mar 14, 2010
Since the yesterdays updates the boot process lasts terribly long of my Fedora 12 on a x86_64 system. It lasts about 10 minutes or longer. The strangest thing is that if I press keys (any of them) it goes faster (about 1 minute). There are no errors or other things which might be the reason for such a behaver.
View 7 Replies
View Related
Feb 10, 2009
fedora install, system with 2 hdd's. 1st xp os 2nd will be xp pro and fedora.question is how to set up the boot sequence so that i can boot from any of the 3 os's?
View 1 Replies
View Related
Jun 11, 2011
I have an embedded box on which I am developping a driver using a linux kernel. I frequently need to reboot it and relogin as root.
I wounder whether I can modify the boot sequence so that it directly boots into a bash belonging to user 'root'.
I know that this represents a security issue -- looking at my "use case" this is of concern.
View 6 Replies
View Related
Nov 22, 2009
I have been enjoying Fedora 11 for sometime, and decided to try Fedora 12. All in all it is working, but the boot sequence seemed much slower. I decided to use bootchart to examine the boot process on my old F11 and new F12 installations. The result show F11 booting in ~34 seconds, and F12 booting in ~57 seconds. Interestingly, the first 30 seconds show that only kthreadd, khelper, and ata/0 are running. CPU and disk utilization are both zero during this 30 seconds span, then all of a sudden everything starts loading, CPU and Disk utilization spike up, and ~23 seconds later I get to the login screen. I sent an email to Harald Hoyer about this, and to my surprise he was kind enough to respond. He suggested I check the BIOS to make sure I had disabled the floppy drive, which I did. The problem persists, so I was wondering if anyone here was having a similar issue and if so how they have dealt with it. I have blacklisted the floppy module (just to make sure)
View 5 Replies
View Related
Sep 18, 2010
I have an external drive mounted courtesy of an entry in fstab. The drive isn't detected at boot time until AFTER the backuppc service that will use the drive has started. I have to therefore manually stop and restart the backuppc service once booting has completed, otherwise backuppc thinks there is no drive available to it.
How can I force the mounting of my external device to occur BEFORE the backuppc service starts?
I am using Ubuntu 10.04 server edition
View 2 Replies
View Related
May 19, 2010
Recently i've upgraded my fedora 11 to 12 using the preupgrade command and now I have a problem booting! when i start the interactive boot it hangs after trying to run the service local, it looks as if its trying to boot because the cursor blinks really fast then blinks normally after a few seconds. no error was stated during the event. what seems to be the problem here?
View 3 Replies
View Related
Nov 6, 2010
i intend to integrate with speedbar in the emacs frame. but the it seems didn't work correctly follow my mind, i have to press C-x 1 to solve the mistake when emacs startup!!!
screenshot for emacs starup:
and after i press C-x 1
what should i write in .emacs? and i had wrote these lines to ~/.emacs:
;speedbar intergration
(require 'tramp)
(defconst my-junk-buffer-name "Junk")
(setq junk-buffer (get-buffer-create my-junk-buffer-name)
)
[Code]....
View 5 Replies
View Related
Mar 14, 2010
I need to do a NFS mount after my PC boot up. So I put an entry in root's cron to do it:
@reboot /bin/mount sun:/mynfs /mnt/sun/mynfs
The mount occasionally fails. But when I manually mount after booting, it always succeed. So I suspect maybe the cron sometimes got executed before the network was started?
Is there a way to delay the mount until after the boot sequence finishes? You know, other than put the command in a script and add a sleep in front of it?
View 2 Replies
View Related
Mar 10, 2010
I Just clicked on the Desktop Effects menu item and the system rebooted and now I can only log in through a tty. I have to use "startx" to get X to start up then I seem to have no file manager.
It seems Desktop Effects and my nvidia driver don't play well.
Here are the xsession-errors
PHP Code:
I noticed this in the messages log
PHP Code:
View 2 Replies
View Related
May 8, 2010
Having upgraded to 10.04 seemingly without any problems as everything looks to be working so far. The only strange thing I have noticed so far is the new startup upsplash. After the BIOS startup I get approx, 25 seconds of blank screen then the new upsplash which is a multicoloured and very indistinct UBUNTU with what looks like DVD/CD control symbols below. After this I get the new purple Ubuntu screen and then the login screen. Total time approx.46 seconds. I also get the same indistinct UBUNTU when closing down. Is this the correct startup sequence for 10.04 and is any else seeing this strange multicoloured indistinct UBUNTU screen. Is it my system/config at fault or is this the norm?
View 1 Replies
View Related
Dec 21, 2010
I recently removed Winblows Vista from my laptop and replaced it with Kubuntu 10.10 (I left the recovery partition on there, just in case). When I turn on the computer, the GRUB menu appears, I press enter, then a little flashing underscore appears on the screen in the top left hand corner. After a few seconds, the Kubuntu logo appears and I can log in.But yesterday I replace Kubuntu with Ubuntu 10.10. The Boot process is the same, but the little flashing underscore in the top left hand corner flashes for about 10 seconds longer then Kubuntu 10.10 did, and then a few paragraphs of text appears for a few seconds, then I am logged in automatically.Is this "unusual" boot process anything to worry about, or am I just being a noob.
View 1 Replies
View Related
May 13, 2010
Today I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"
View 5 Replies
View Related
