Ubuntu Installation :: Non Executable Memory Error When Enter /usr/bin/check-bios?
Apr 1, 2011
I have decided to load the OS on a old HP Compaq DX2000 MT to see if its for me before putting it on my main machine.
I loaded Ubuntu version 10.10 last night everything was fine except I could not get my wireless adapter to work, I decided to connect via ethernet to get the latest updates and drivers.
After the updates and restart I now get the non executable memory error. when I enter
/usr/bin/check-bios-nx --verbose
I am told I have NX capabilities and should go to the bios and enable it. There is nothing in
the bios to enable as far as I can see. So I enter the command
sudo rm /etc/update-motd.d/20-cpu-checker
View 3 Replies
ADVERTISEMENT
Feb 4, 2010
i have just discoverd i can't enter my windows 7 via grub boot menu i get error 13 Invalid or unsupported executable format what can i do? # This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sdb1
[Code]...
View 1 Replies
View Related
Aug 18, 2010
I tried to install OpenSuse 11.3 on my brand new pc, which already had Windows 7 proffessional in it, and I went step by step through the installation without changing anything. It didn't work. I tried for a second time and this error message kept popping up: "Creating device modes with udev 2.0436224] [drm: i915_diver_load]*ERROR*Detected broken BIOS with 262140/2644kb of video memory stolen. 2.0436224] [drm: i915_diver_load]*ERROR*Disabling GEM(try reducing stolen memory or updating the BIOS to fix)"
And then a lot of letters and numbers wich make no sense to me. Now the only way I can initiate OpenSuse is with the OSuse boot dvd and on failsafe mode.
View 5 Replies
View Related
Mar 13, 2010
I am trying to install a GNU/Linux distro (ubuntu) on a netbook. I have my pendrive ready to do that, but I can't enter into the BIOS to say the machine to start from USB device.I tried F1, Del, F12,... but I only see the M$ Windows7 start boot menu.
View 2 Replies
View Related
Oct 16, 2010
So, for some reason the right side ENTER, period, semi colon, SHIFT, and UP, Down, Left arrow keys have all stopped working on my laptop. I just set up a dual boot with windows xp, and ubuntu.
I checked under the keys, and cleaned them, and no problem. This wouldn't be that bad of a sutuation, I could just re-map the keys. However, when my computer starts, and I enter Bios > Bootloader, I get stuck.
I can use home/end to move up and down, but no way to select which OS I want. I have to plug in a USB keyboard to get into my OS. I don't want to be carrying around a keyboard, otherwise I wouldn't have a laptop.
So, I either need a different bootloader which can use some other keys, or I need a way to remap the enter key all the way back at the bios, so I can trick it and enter my OS,
Edit: Actually, I'll probably need a new keyboard. Ubuntu is pretty good with battery life, so I could boot into ubuntu, then hibernate. So, I need a good key mapper for Ubuntu
View 1 Replies
View Related
Jul 18, 2011
suddenly after upgrade
2.6.38-10-generic-pae ===> Error 16: Incosistent filesystem structure
2.6.38-10-generic-pae (recovery mode) ===> Error 13: Invalid or unsupported executable format
2.6.38-10-generic ===> Error 13: Invalid or unsupported executable format
[code]....
b08e48b7-1194-49c1-a743-91e7ee90334e is a link to /dev/dm-2 which is my root partition on nvidia raid
PS: At first it did not boot at all dropping out to grub shell, but I managed to boot it with gparted live usb stick and chroot to Ubuntu and re-install grub, but now 2.6.38-8 kernel works and 2.6.38-10 is not
View 1 Replies
View Related
Jun 14, 2010
When I enter my Bios it says I have 1 Gigish and in ubuntu 243.1 MiB. Things might be alot faster with that ram working. I have a dell E210882 Motherboard.
Total used free shared buffers cached
Mem: 243 237 5 0 6 47
-/+ buffers/cache: 183 59
Swap: 708 41 667
View 1 Replies
View Related
May 11, 2011
when I delete a running executable or script, it usually (for me, pretty much always, but I don't know if it will work in every case) continues to run without any problems. So I've got two questions here: Where is the running executable/script being run from? RAM memory? If stored in RAM or where ever, is there a way to extract the executable/script from that location? If it makes any difference, I'm using Ubuntu 11.04.
View 1 Replies
View Related
Oct 20, 2010
Is there any command that can check the referenced functions in a executable?
View 1 Replies
View Related
Nov 4, 2010
I have 4GB RAM installed on my PC (ASUS P7H55M-BR, Intel i3 530 2,93Ghz). Onboard video has 32 MB (BIOS config).
It should be this way (or maybe not?):Each slot has 1GB of RAM memory: 4 x 1024 MB = 4096 MB.
Now, subtracting the video memory: 4096 MB - 32 MB = 4064 MB.
It's working on Dual Channel.
But when I am booting the system, the BIOS shows only 3920 MB (3,9GB). Linux shows even lower: 3881 MB.
Memory Remap Feature is enabled at the BIOS config.
View 5 Replies
View Related
Feb 19, 2011
How can I Bios configuration and check USB setting?
View 7 Replies
View Related
Jan 20, 2011
My external USB drive came formatted NTFS. It had a list of compatible OSs on the back of the box.Debian was not listed. I reformatted it during installation never planning to use it for NT. My BIOS just happens to be Phoenix. I have everything up and running fine. I just have to remember not to forget the startup sequence in order to avoid a permanent non-transitory Grub Stage1.5 Error 21. I don't want others to have to clean Grub or start over if it's unnecessary and there is a work around as simple as a startup sequence. Nor am I pointing the finger at Phoenix.
My external USB drive has its own separate DC power supply apparently needing more power than a thumb drive or what it could pull from a USB port. Here's a picture:
Back of the external USB drive
WDBAAH0010HCH-00.jpg (11.33 KiB) Viewed 195 times
View 1 Replies
View Related
Mar 29, 2009
I just downloaded the Fedora 10 cd yesterday and decided to install it. I had a partition for Fedora on my system before but I'm not really sure what I did to it. It wasn't booting and it has been so long since I messed with it I just decided to reinstall with the latest (I think I was running F9 previously). So I pop in the live CD, run the install, and then reboot into Ubuntu. I modified my menu.lst to include the new vmlinuz and initrd versions, as well as the new UUID of the partition. Now when I reboot and choose Fedora from grub's menu I get this error:
Quote:
Error 18: Selected cylinder exceeds maximum supported by BIOS
I found this wiki which does a pretty good job describing the problem:
[URL]
However, I'm still unable to get this to work. According to many different sites out there this problem shouldn't exist on newer computers. Well, I just recently put a new motherboard into this box -- it's this one:
[URL]
According to their BIOS page the first release of this was late November 2008. Yes they have had 2 updates since then but it looks like those only serve to support AM3 CPUs (which I don't have) or update some audio playback issues. I seriously doubt I need to update my BIOS to get this to work.
Here's my fdisk:
Code:
$ sudo fdisk -l
Disk /dev/sda: 400.0 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I can get Slackware 12.1 to boot (though it kernel panics during startup...not sure what I did to make it angry), but grub immediately fails when I attempt to boot Fedora. Here's the entry from menu.lst:
Quote:
titleFedora 10 (on /dev/sdb1)
root(hd1,0)
kernel/boot/vmlinuz-2.6.27.5-117.fc10.i686 ro root=UUID=178bc9f9-76ba-48aa-a588-de978cc1eee1 rhgb quiet
[code]...
I have verified that the vmlinuz and initrd are both correct. I put the UUID in there after running vol_id so I'm sure the entry is solid. I have tried making it "root=/dev/sdb1" which failed with the same error, and I even tried copying the fc10 vmlinuz and initrd files over to my Ubuntu partition (which controls grub) but for some odd reason the cp command takes a really long time and then I eventually get this weird error for initrd:
Quote:
$ sudo cp /media/sdb1/boot/initrd-2.6.27.5-117.fc10.i686.img .
cp: reading `/media/sdb1/boot/initrd-2.6.27.5-117.fc10.i686.img': Input/output error
I got the same error with the dd command too. So I was going to just try and copy the files to my sdb3 partition and then modify the menu.lst entry appropriately but that doesn't seem to be plausible at this point.
I have a motherboard that was just released about 4 months ago, an Athlon X2 6000+ CPU, and 4gigs of RAM. The drives are both SATA 300 drives...it's not like this is some old Pentium Pro and the BIOS just doesn't support large drives...this is a brand new system with a very recent BIOS version.
I have successfully quadruple booted all of these in the past, but that may have been prior to the new motherboard. So that makes me think it could be something related to the motherboard but the thing is so much newer than what I previously had, certainly that can't be the problem...can it? Then I remember that Slackware boots, so if it's truly something about how the BIOS can't access some file beyond a particular section of the disk, then it doesn't make any sense that it can book slackware. Fedora is the first partition, Slackware is the last and is like 200+ GB into the disk.
View 8 Replies
View Related
Jun 19, 2011
When I boot up my desktop, lilo spends more than a minute printing a string of dots to the screen, before it declares "Bios data check successful" and then loads slackware normally.
I did
Code:
echo compact >> /etc/lilo.conf
lilo
but lilo declared that to be a syntax error and is as slow as ever. My lilo/conf contains
Code:
# LILO configuration file
[Code]....
View 5 Replies
View Related
Apr 19, 2010
I get this error when I run "sudo apt-get install python-software-properties"
Preconfiguring packages ...
dpkg: unrecoverable fatal error, aborting:
fork failed: Cannot allocate memory
E: Sub-process /usr/bin/dpkg returned an error code (2)
I'm trying to install deluge via ssh and my vps has 512mb ram and is only using 11% of it prior to running the code.
View 2 Replies
View Related
Nov 13, 2010
Today, I burned a copy of Lubuntu 10.10 Maverick Meerkat and tried installing it on my old 2.4Ghz Celeron 192MB RAM (actually 256MB with 64MB dedicated by the BIOS for the internal video card) laptop, which installed Lubuntu 10.04 Lucid Lynx with absolutely no problems. However, when I tried inserting the disk for Maverick this time around, the live CD boot always hangs during Plymouth, and pressing Esc shows:
Code:
Generating locales. en_US.UTF-8.I modified the boot options and removed splash and quiet, and I got a whole lot of messages that seemed like errors, but I think the root of the problem was this:
Code:
Out of memory: kill process 620 (localedef) source 929 or a child Killed process 620 (localedef) VS2: 59500kB, anon-rss: 57596kB, file-rss: 820kB After that, it got a few messages about localedef timing out for 120 seconds or something. Now I'm no idiot, I'm well aware that my laptop is cutting it very close to the minimum RAM requirements of the live CD, but it's just the live CD that stops me from running Lubuntu, because once it's installed, I have no problems. I ran Lubuntu 10.04's Live CD with no problems and the installed LXDE system ran amazingly fast. I'm sure if I could just install Lubuntu 10.10, it would run at the same speed. The problem is that the Lubuntu wiki still writes the minimum system requirements of:
[Code]..
View 2 Replies
View Related
May 28, 2011
I bought a 2nd hand DDR 1GB memory chipset a few days ago and inserted it in to spare slot on motherboard. However unsure if memory is working properly because bios does not recognise it and neither does Linux but system does appear to run a lot smoother with programs loading faster. If there is a test I can perform to check if memory is working fine or simply return back to shop I bought it? Computer is a DELL Optiplex 170L mini tower system.
View 1 Replies
View Related
Jul 23, 2011
I'm trying to run Starcraft 2 from the installation folder I kept from my previous windows install, and when I double-click the .exe I get an error that says it doesn't have permission to run as an executable. So I checked out the properties page, permissions tab, and for some ungodly reason none of the changes I make stick. The second I click the check box for "Run as an exectuable" it unchecks. I have no idea what to do and I've scoured the net looking for an answer. I'd prefer to avoid redownloading it (didn't buy the retail version) but it's looking like my only option at this point.
View 1 Replies
View Related
Jan 29, 2010
there a way to check what type of memory is in a laptop & how much it can have,
View 7 Replies
View Related
May 6, 2010
After upgrading to 10.04, I noticed Firefox would suddenly crash for no apparent reason. I tried to run the update manager to see if there were updates available. There were a whole slew of them. They downloaded and began installing, but it gave me an error. Clicking the "do not enter" warning icon gives me this:
Code:
Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: 'E:Problem parsing dependency Depends, E:Error occurred while processing postfix (NewVersion1), E:Problem with MergeList /var/lib/dpkg/status, E:The package lists or status file could not be parsed or opened.'Anybody have an idea how I can fix this and install the updates?
[Code]...
View 1 Replies
View Related
Jul 20, 2011
How to check memory in unix or nix
View 1 Replies
View Related
Dec 12, 2010
Tried upgrading from 8.04 lts to 10.04 and it wouldn't work b/c of too many mods to my 8.04 system? So I tried a fresh install per usb stick. System kept locking up during install, as well as when I run it from the usb, I've since learned. graphics card? I can't log into windows either per the grub loading please wait error 15. I've googled & searched the forums & everything I've tried doesn't work, there were some possible solutions that I don't understand how to do. can't get to a terminal to check or modify anything. Hitting "e" at the boot menu does nothing. I don't know how to do anything from here! Compaq Presario SR5350, 2GB RAM, Dual Core Proc 2150MHz. Dual boot w/Vista, HDD is partitioned separately with Root, Home & swap. Also, sda5 or / has been formatted to ext4, still using grub 1.5.
View 9 Replies
View Related
Dec 18, 2010
I"m unable to find the memory usage however top shows me the following results.
Tasks: 90 total, 2 running, 88 sleeping, 0 stopped, 0 zombie
Cpu(s): 21.1%us, 1.4%sy, 0.0%ni, 74.0%id, 2.4%wa, 0.0%hi, 1.0%si, 0.0%st
Mem: 8313376k total, 7969976k used, 343400k free, 185496k buffers
[code]....
and free shows the following.
total used free shared buffers cached
Mem: 8118 7764 354 0 181 7335
-/+ buffers/cache: 247 7870
Swap: 4000 0 4000
Total: 12119 7764 4354
how can i find the usage of memory which is being showed by top and free.
View 3 Replies
View Related
Jan 20, 2010
I'm trying to install Fedora 11 (64-bit) but after a small message about ISOLINUX the monitor refreshes and displays the following message: "Press the <Enter> key to begin the installation process." At that point the keyboard dies and I can't go any further. I tried 4 different FC11 dvds, also tried different PS2 and USB keyboards but the problem persists.
How to install FC 10 first and then upgrade to FC11. I tried that as well with no luck. I can install FC10 with no problems but why not FC11?
View 7 Replies
View Related
Jan 8, 2011
I have been setting up a vps I got out with bhost.net, with CentOS installed. I've been learning and have set up everying I need with the exception of ftp/sftp.
Using yum I installed vsftpd and ran into problems, thinking it was something I might of done I did a fresh install of CentOS and I still recieve the same problem on a fresh install so it is nothing I have done to the server.
The problem is when connecting via a sftp client I get an out of memory error. This error is listed in the putty faq ( url ) under A.7.5, there is a brief explaintion of the cure under A.7.6.
there is mention of a login script but I don't know where this is located. I'm a novice at Linux but by no means incompotent when it comes to computing.
View 5 Replies
View Related
Apr 24, 2010
I'm installing and configuring my first server using RackSpace CloudServers running Ubuntu Karmic Koala (9.10) and I'm now installing iRedMail. The installation runs successfully until I recieve this error:
Code:
The following packages have unmet dependencies: mysql-server-5.0: Depends: mysql-server-core-5.0 (>= 5.1.30really5.0.83-0ubuntu3) but it is not going to be installed
E: Broken packages < ERROR > Installation failed, please check the terminal output. I understand this is telling me there is some software that iRedMail (or something iRedMail is dependant upon) that needs installed. Is this correct? And if so, what is i needing installed and how do I do that (aptitude install example-package?)?
View 4 Replies
View Related
Aug 23, 2010
I downloaded Ubuntu 10.4 netbook edition for my toshiba satellite a105 laptop (windows XP) burned it to a CD, restarted my computer with the disc in drive, pressed f12 at the appropriate time, chose to boot from CD. after sitting for a second i get error PXE-e61 media test failure, check cable. and then it boots XP normally. how do i get around this to install linux!
View 4 Replies
View Related
Sep 6, 2010
yesterday i tried to install bt4 from alongside ubuntu 10.04. Unfortunately the DVD had some errors and the installation stopped. Everything was fine till then, even the GRUB was working(i guess!) but when i tried to log into my Ubuntu it gave me an error... " /usr/lib/libgconf2-4/gconf-sanity-check-2 exited with error status 256" also there was a popup like "gnome power management was not properly installed ....blah blah blah Contact you network admin"
i have only one user on that system. i tried the single user mode but no success... i then tried to Ctrl+Alt+F1-F6 no success... can't switch to command line(this is my display problem i guess)
i have now decided to install a fresh install but i do need to take the backup. What all should i copy to the new install so that i get the same feel as before?
View 1 Replies
View Related
Jan 28, 2009
I am trying to install Fedora-ds on Fedora Core 10 and I am getting a weired error.it just says check the log file for more details and in the /tmp/setupXX.log
[09/01/28:16:01:35] - [Setup] Info Administration port
[09/01/28:16:02:00] - [Setup] Info 9830
[09/01/28:16:02:00] - [Setup] Info The interactive phase is complete. The script will
[code]....
View 4 Replies
View Related
Jan 17, 2011
I have had Fedora 14 running well on my Dell Latitude XT. All was good until I created an NTFS partition and attempted to install windows XP on it. The installation failed, then when the computer boots i get:
"Error Loading Operating System"
I have attempted the following:
1) FedoraLive from USB then :
Code:
[root@localhost liveuser]# grub-install /dev/sda
Probing devices to guess BIOS drives. This may take a long time.
/dev/mapper/../dm-0 does not have any corresponding BIOS drive.
2) I tried:
Code:
# grub-install --recheck /dev/sda
Probing devices to guess BIOS drives. This may take a long time.
/dev/mapper/../dm-0 does not have any corresponding BIOS drive.
View 6 Replies
View Related
