Fedora Installation :: "Press Any Key To Enter Menu" Booting Loop?
Dec 9, 2009
I have just installed Fedora 12. After my pc boots up, the message:"Press any key to ent This continues to appeuntil I press any key and then the GRUB boot menu appears:Fedora (2.6.31.6-145.fc12.i686.PAE)BootIf I choose "Fedora", it boots properly into the login screen.What do I need to do to have the system boot directly into the log in screen, without going into this loop, boot menu and having to choose what to boot?
I have never in a year had a problem with this d-boot system. Two days ago I tried to boot into ubuntu like every day. It started to load normal, went to the ubuntu logo and paused for about 15 seconds and posted this under the logo:
One or more of the mounts listed in /etc/fstab cannot yet be mounted /: waiting for /dev/loop0 /tmp: waiting for (null) /boot: waiting for /host/ubuntu/disks/boot Press ESC to enter a recovery shell
I have looked everywhere and tried so many things, I can't look any further. All I have been doing for two days is trying to boot this system.
I recently removed Winblows Vista from my laptop and replaced it with Kubuntu 10.10 (I left the recovery partition on there, just in case). When I turn on the computer, the GRUB menu appears, I press enter, then a little flashing underscore appears on the screen in the top left hand corner. After a few seconds, the Kubuntu logo appears and I can log in.But yesterday I replace Kubuntu with Ubuntu 10.10. The Boot process is the same, but the little flashing underscore in the top left hand corner flashes for about 10 seconds longer then Kubuntu 10.10 did, and then a few paragraphs of text appears for a few seconds, then I am logged in automatically.Is this "unusual" boot process anything to worry about, or am I just being a noob.
I have a new Dell R710 dual processor machine I'm trying to install Fedora 11 x86_64 on (all versions I mention in this post are x86_64 bit). I downloaded the cd iso files, burned them to cd (I don't have a DVD burner), then told my machine to boot to the optical drive.
I get a very brief introduction message about ISOLINUX then the monitor refreshes and gives me the following message: "Press the <Enter> key to begin the installation process."
Naturally, I press the Enter key(s) on my keyboard. Nothing happens. I try Alt ASCII combinations that might mimic an Enter key. No dice. ctrl-alt-delete works, however, and the machine reboots.
My checksums for the iso's are perfect, and the install process triggers perfectly on other machines. Just not this one.
After much vain research, I download the Fedora 11 Live-KDE, burn it to CD and try it. It doesn't work - the same thing happens. I tried the net install, and it doesn't work either.
On a lark, I download the Fedora 10 Live KDE iso and burn it to cd. It works perfectly and skips the "Enter" phrase entirely. I take my Fedora 11 Live KDE disc and put it in another machine and it, too, works perfectly, which leads me to believe my cd burns are fine.
I've also used usb creator to create a bootable USB drive. It doesn't ask me to press enter - it just fails with a really arcane IF=0 error (arcane to me, anyway).
So I'm at a loss. I'd like to install Fedora 11 on this machine, but may end up with Fedora 10 or CentOS if I can't figure this out.
Is there some weird BIOS setting somewhere I'm missing? I find it really weird that my fedora 10 cd works, but my fedora 11 cd does not (but my fedora 11 cd works in other machines).
I'm trying to install Fedora 11 (64-bit) but after a small message about ISOLINUX the monitor refreshes and displays the following message: "Press the <Enter> key to begin the installation process." At that point the keyboard dies and I can't go any further. I tried 4 different FC11 dvds, also tried different PS2 and USB keyboards but the problem persists.
How to install FC 10 first and then upgrade to FC11. I tried that as well with no luck. I can install FC10 with no problems but why not FC11?
I downloaded the appropriate iso for the ps3 from here:[url]
(specifically: ubuntu-10.04-desktop-powerpc+ps3.iso via torrent)
Installation runs smoothly up until 100% and then i am prompted to reboot.
When i click reboot, i get info on some daemons(?) shutting down(i think) and then the cd is automatically ejected and i am prompted to press enter.
So far, so good. After i hit enter though, i get a large amount of various read errors and finally a segmentation fault. The system just hangs there :/.
I forcibly reboot the PS3, and then i am greeted with the pack of errors that are shown in the screenshot.
I've been fiddling about with vortexbox (the one before 1.4 I think), for a while. This is a music ripping and server rpm setup using Fedora 11 as the base.
As it was on a test machine, decided to try changing the logical volume sizes of LogVol00 and LogVol02 to fit a few more cd's on 02 before getting a new pc (just to see how it works).
Logged on and opened up the graphic version of lvm (using gnome). Then selected the LogVol02 logical volume, select edit, changed name to LogVol02-Storage, saved and logged out. Rebooted vortexbox since then its been unable to start properly (is this a kernel panic?).
Read up a lot on lvm on the net, have access to Fedora 11 disk 1, so logged on. Eventually managed (I thought to) to change LogVol02-Storage to LogVol02 using lvrename.
However, still refuses to boot completely.
The message it gives is as follows (sort of): Welcome to Fedora Press '1' to enter interactive startup
Setting up Logical Volume Management: 3 logical volume(s) in volume group 'VolGroup00' now active
*** An error occurred during file system check. *** Droping you to a shell; the system will reboot when you leave the shell.
Give root password for maintenance (or type Control-D to continue):
Loving vortexbox appart from this. Will it be easier just to reinstall everything? If so, is there a way of listing all the changes I've done so I can reproduce (I'm thinking of just looking at all the commands I ran on the CLI).
Otherwise, is there a way of listing all of the commands I ran in terminal and piping them into a file so I can see what I need to do to rebuild after reinstalling?
I bought a t770.uk HP desktop PC, which came without a Hard drive as the pervious owner had removed it for security reasons. A week later I got a hold of a brand new - out of an anti-static sealed bag - compatible Western Digital Caviar SE 80GB SATA150 7200 HDD, and installed it as directed by my t770.uk manual. Up until now, things looked to be on a roll. As I don't have any windows OS, I figured Ubunutu would be the way to go (and it certainly is from what I've heard and read about it. I can't wait!).
So I sent off for a CD and it popped through my mail a few weeks back. The problem that I am having is after booting past a very brief view of the HP POST screen, the screen goes black with the error "Disc boot failure-insert system disk and press enter". I've tried placing the Ubuntu disc in (assuming it is asking for that? An OS disc) and restarting, and changing the boot order around, but no matter what I do the error persists and I can't install Ubuntu. I really want to get this PC running with Ubuntu.
I have downloaded the Damm small linux iso ,and burned the image to the CD with infrarecorder .But when i try to boot it from the CD ,I get the DSL logo and press enter to boot ,then the computer freezes with two small penguins in the top left corner of the screen.
My Ubuntu was working perfectly fine until this morning. It is the latest release (10.04 I think) and it is the 64 bit version. This morning I go to my computer and see there are some updates waiting. I install the updates without paying much attention to them. I really do not remember what the updates were. Then Ubuntu asks me to restart so I restart. After restart I get the usual log in screen and I hear the drums. I put in my password, press enter and then the log in screen disappears and I expect to see my desktop. But that does not happen. Instead in a split second after disappearing, the log in screen reappears and I hear the drums again.
At the beginning I thought that I simply forgot my password. But that is unlikely because I have been using the same password for 6 years now. But just in case I tried an incorrect password and I got a different behavior. If I put in an incorrect password, Ubuntu will simply say "authentication failed" and the log in screen will not disappear. When I put in the correct password, the log in screen disappears for a split second (as if my password is correct) but then instead of taking me to the desktop it takes me back to the log in screen and sounds the drums again.
i had recently installed fedora 12 in a system running debian lenny in (hd0,0), its grub is installed in mbr and the grub of fedora is installed in the installation partition of fedora .I defined a separate partition /boot for debian but for fedora i used the available space for boot swap and /. i booted with live cd to copy the grub.conf of the fedora to add it into menu.lst of debian but i have got "error 15 : file not found".
Today, I was downloading some stuff from online. I left for a few minutes and came back to find that someone had hit my loose power cord, causing the computer to restart. When I completed the reboot (It always says "Insert system disk and press enter" after checking CD drives), and had it load OpenSuSE 11.3 Failsafe (Regular won't work for me), it loaded into Teal (BASH, Command Prompt, Kommand, whatever you want to call it). At first, I thought maybe I screwed up and told it to load into that. But, I tried again, and it did the same. I tried using Non-Failsafe, and got the same results. I am able to edit, add, or remove programs from the Linux partition, though.
I'm trying to do exactly this: [URL] the first time i did it, I made it and everything was fine, except I didn't know what "installation size" meant in wubi, so as I selected 3GB, the rest of the partition was left empty and I didn't have enough space for ubuntu. Then I formatted the partition again and reinstalled ubuntu. Since then while it's booting, I get the message Disk boot failure insert system disk and press enter. I tried reinstalling many times, but I still get this message..
In Windows Explorer, if a file is focused, press Menu Key on keyboard, context menu will show on top of the file. But in Nautilus, the same action shows context menu where the mouse cursor is. That's a bit annoying. Is there anyway to make it work like Windows?
I downloaded the 32bit iso from the ubuntu website and wrote it to disc using imgburn.
The problem is that when i boot from cd i get the loading splashscreen with the 4 dots flashing then it loads the ubuntu background and my mouse curser spins around for awhile then tells me the installer encountered and unrecoverable error and a desktop session will now be run so you may investigate and problem or try installing again. When it reboots it asks for a username and password. i use ubuntu and blank and then it does a loop and the logon menu comes up again.
the computer is an old acer aspire running xp home sp2
i tried it on another computer a dell laptop running vista and it worked fine and can up with the menu and i clicked try now and it booted into the gui.
I downloaded the iso for my system (desktop x86 32bit) and I get the computer to open the install menu. I pick english, and then it wont let me select an install option. Arrow keys work, function keys work, even pressing enter gets the cd to spin in the drive, but it wont progress to loading the install files...
Debian if my first OS and i want to dual boot Fedora12.Ok i installed Fedora12 and choose not to install the bootloader(gonna use the one Debian installed)What i'm tring to do in Debain is edit my /boot/grub/menu.lst Here is what i have
Is there a button I can press when booting to log into a 'safe mode' ? Like f5-f6 does on windows? Or a command prompt? My ubuntu fails when it loads X and cant get out of it, is there something I can do to allow me to log into the system to see whats the problem or revert it back to the old settings?
I had Ubuntu 10 running on vmware machine. It ran fine. I upgraded to version 11, but now when the machine restarts I do not get any menu, I just get his: GNU BRUB version 1.98-1ubunutu7 Minimal BASH-like line editing is supported. grub>
And that is it! No menu, no list of options, nothing. If I type "ls" I get: (hd0) (hd0,5) (hd0,1) (fd0)
I can enter "root (hd0,1)" which gives me: (hd0,1): Filesystem is ext2.
Then typing "kernel /boot/vm" and pressing tab shows: vmlinuz-2.6.32-27-generic vmcoreinfo-2.6.32-27-generic vmlinuz-2.6.35-28-generic vmcoreinfo-2.6.35-28-generic vmlinuz-2.6.38-8-generic vmlinuz-2.6.38-8-generic
There is no /boot/grub/menu.lst but there is /boot/grub/grub.cfg which seems fine as far as I can tell. Did I somehow end up with an older grub which is looking for menu.lst? I have other machines running Ubuntu and if I boot into them I seem to get a GRUB4DOS etc. slightly different version. The grub version shown above is 1.98 but I read somewhere Ubuntu uses version 2? Actually I found another post which suggests that this is the correct grub version for Ubuntu 11. How can I tell what menu file grub is looking for where it is looking and why its not finding or using it? It should work...
I have two Lenovo laptops: One is a T410 now running on openSUSE 11.4 with KDE 4. I got my wireless, keyboard languages/layouts, upgraded firefox... The other, a V570, is currently running Ubuntu 11.4 and I'd like to install openSUSE 11.4 on it.
Here is what I did. Downloaded openSUSE-11.4-DVD-x86_64.iso from software.opensuse.org: Download openSUSE 11.4 (Direct link). md5 checksum is good (compared to checksum posted by caf4926). Burned to DVD using Brasero. Installed openSUSE on the T410 (did the media check first from the installation menu - it was ok). Install went well and system is running fine. I'm happy with it
This is the problem I'm having; tried it about 10 times now and every time it's the same. Using the same DVD, trying to install openSUSE 11.4 on the V570 machine; after turning on, it boots from the DVD and I get the following 3 lines and then the cursor just sits at the fourth and does not continue
I have done something fatal with my Ubuntu, that is in terminal I type: sudo apt-get remove gdm, then I delete usr/share/bin/gdm, when I reboot appear message that I must configure graphical manually, then I choose enter x-konsole or terminal, in the x-konsole I type: sudo apt-getinstall gdm, then I reboot use live CD, then Icopy usr/share/bin/gdm from live CD to harddisk. Then when I restart use harddisk, booting screen Ubuntu always continuous display and can not enter desktop.
i have lucid lnyx installed as my main system and added natty on a seperate drive. after installing, the new grub detected lynx & i was able to boot into each without any problem. after doing some tweaking on natty (changed run level), it didn't boot properly so i reverted to the old config via rescue disk. after rebooting, the old grub menu didn't show & it loaded lynx automatically.
i tried the suggestion from another post changed the hidden menu and updated grub but it didn't detect natty (below).
------ update-grub ------ Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.32-31-generic Found initrd image: /boot/initrd.img-2.6.32-31-generic Found linux image: /boot/vmlinuz-2.6.32-30-generic
I'm randomly getting 'Continue to wait; or press S to skip mounting or M for manual recovery...' or something like that at boot ((it flashes very quickly)- If I don't press anything, I'm prompted for my password (I configured it to login with password) and the desktop loads...
I'm using Ultimate Edition 2.6.1 -> Ultimate Edition Home
I was using my 1TB hdd to dual-boot linux, windows, and for storage...Yesterday, I imaged the linux partition, and restored it to an approximately 66GB partition I created on a 150GB hdd...Besides the 66GB partition, the rest of the 150GB hdd is 'unallocated space'... That's when the above message started...Below are screenshots of the fstab and partitions as they are now...
