Have decided to stop using Hylafax and our two serial modems on our server running Clarkconnect 4.1 (RHE4.1)What file will I go to to edit so the program and two devices don't start up?I disconneted the devices and the log file is full of the attempts to get the modems working
View 3 RepliesWhat is the procedure for editing a startup.sh script? My doc says to do it but not how exactly.
View 2 Replies View RelatedIm having a hard time trying to change my raid configuration. Here is my situation:
A have two HDs that I configured in instalation time to work as raid squid proxy-cache. they are both 40GB. 40+40=80GB. So, I want to change it to two of 160GB. 160+160=320GB.
I have:
sdc1=40GB
sdd1=40GB
im adding / want:
sda1=160GB
sdb1=160GB
I want to remove the two 40GB and use only the two 160GB for my proxy. The thing is that when I remove the two 40GB, the system crashes at startup telling me that the raid cant be done then file system check fales too. Im wondering if there is a file a have to edit to change to point it to /dev/sda1 intead of /dev/sdc1 for example, so my system would start up looking for sda1(160GB) and sdb1(160GB) intead of sdc1(40GB) and sdd1(40GB).
just returned to fedora from a stint with xp for development with xp embedded (acutally pretty cool) before i get all cozy with settings and install programs, etc, etc, what is the upgrade procedure for 13? does all of this go for naught, or are settings kept if you upgrade with yum? i hope the answer is what i want it to be!
View 1 Replies View RelatedWhat are the precautions and procedure do i need to follow while upgrading the Kernel?
Please let me know the complete details of a procedure of upgrading a kernel in a production environment?
i need help to connect bsnl dataone broadband.with DSL.i have tried above procedure but connection get failed.
View 2 Replies View RelatedI would like to install Fedora 11 on an ASUS P5L-VM 1394 motherboard with a 3 GHz Pentium 4 CPU. This is an LGA775 socket mobo with a Intel 945G chipset. Two SATA hard drives are plugged into SATA ports. An IDE DVD drive is plugged into the IDE/ATA port. Using the 32 bit Fedora 11 installation disk, I have seen two cases:
1) No hard drive recognized. When i get to the disk configuration screen, there are no options to choose from.
2) By monkeying around with the BIOS settings or switching the SATA ports the disks are connected to, I can get an alternative mode in which no drivers are found for the DVD drive either.
Currently, a version of Ubuntu is installed. UPDATE: The board was purchased in a P3-PH4C barebones, which for unknown reasons requires a different BIOS issue than the regular P5L-VM 1394. Updating to the most recent BIOS does not resolve the problem. One the installation procedure fails to recognize the hard drives, going into a shell and examining the boot up log shows that the kernel recognized both hard drives. So it's down to why the installation procedure is not recognizing them.
I'm running Karmic with an NVIDIA GeForce 6600, normally at 1280x1024. Just during the past week, the resolution has started spontaneously changing to 1024x768, just after I type the password to login. I get the Ubuntu splash screen with the animated light thingy underneath, then the screen flickers and it goes to 1024x768. I have tried changing driver but this has no effect.
I then have to change it manually using the Nvidia X Server settings utility, which is fine. I can then save X settings into /etc/x11/xorg.conf but next startup it does exactly the same again. I have seen a lot of posts in which Ubuntu leaves users stuck in a low res, or even tries to put them into an unsupported res, but nothing quite like this. Is there a Gnome setting somewhere that defines screen res at startup??
I cannot find where i can change the startup sound for 9.10. Everywhere that i have read so far has me go to System->Preferences->Sound and there was supposed to be a tab there for logon and logout sounds. I do not have that tab in my sounds screen.
View 3 Replies View RelatedI have a dual boot windows 7 and ubuntu karmic and by default whenever i turn on my system it automatically boots into ubuntu but i want windows 7 as my default boot up os, so can anybody please suggest what should i do.
View 3 Replies View RelatedI want to know how to change ubuntu startup logo?
View 4 Replies View RelatedI have noticed a few problems when some screenlets are loaded before some others. I think that "Startup Applications Preferences" should have an option to arrange the order of their execution.
View 4 Replies View RelatedI have Ubuntu 9.10 and I want to replace the splash screen with the white Ubuntu logo and the marquee progress bar with that of Xubuntu with those whirling sparkles.
View 1 Replies View RelatedI wanna get the startup sound Backtrack plays when logging in . Anyone can show me how to change the system startup sound and where I may be able to download that startup sound from?
View 2 Replies View RelatedIf I have compiz on, it causes my system to freeze sometimes at startup. I've turned compiz off, but I miss the effects. Is there a setting somewhere I could change to prevent the freezing at startup. We have a computer with an nvidia card with compiz enabled, and this doesn't freeze. Graphics Card: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (From lscpi) Ubuntu Release: 10.04
View 2 Replies View RelatedI recently installed Ubuntu according to the instructions on the site. However, now when I start up my computer I see Ubuntu, Ubuntu recover (something like that), two windows 7's, and windows vista. Before I installed Ubuntu I only had windows 7. How can I clean it up so that I only see Ubuntu and Windows 7?
View 7 Replies View RelatedI'm using dual OS (XP and Ubuntu 10.04) and i have been using ubuntu for past a year, now i have a problem when booting, that i made by mistake.
I use Windows XP only to work with Photoshop other than that i mostly use Ubuntu for everything. Recently my windows xp got crashed, so without any idea i have reinstalled windows xp but now i cann't able to find my ubuntu. i don't know what to do right now?
Am i required to reinstall ubuntu (my most of the files are in ubuntu), is there any solution without reinstall.
I find that need to change the boot.ini, but i'm not getting any proper results
Note: Need to Change the booting from windows XP to promting for Ubuntu and Windows XP
I have an external drive mounted courtesy of an entry in fstab. The drive isn't detected at boot time until AFTER the backuppc service that will use the drive has started. I have to therefore manually stop and restart the backuppc service once booting has completed, otherwise backuppc thinks there is no drive available to it.
How can I force the mounting of my external device to occur BEFORE the backuppc service starts?
I am using Ubuntu 10.04 server edition
I'm using in the server 8.4 and installed the package startupmanager which is GUI, through this package I can show the text during boot, unlike in the 9.10, I checked the "show the text during boot" same I did in the 8.4 bu It's not showing the text and still show the splash...
how to change it direct from shell instead of the stupid GUI
It takes about 30 seconds for the desktop to 'fully load'. When I login I see my background, but nothing else. Then you wait 30 seconds and you see the panels appear. Is there any way to fix this lag, and make it an instant load? Cause really it should not take that long to load a panel with not really anything on it.
View 2 Replies View RelatedCan I change the default template used by gnumeric at startup? How?
View 1 Replies View RelatedHow do you change the order of execution of gnome startup apps?(System - Preferences - Startup Applications) does not seem to have any way to do it.I saw an archived post (http://ubuntuforums.org/showthread.php?t=659420) which offered a couple of ideas... (1) mucking around with /etc/rc2.d/ -- but that seems to be only system-level apps, not user apps; or (2) going to (System - Preferences - Sessions) and mucking around in there -- but I don't seem to have that menu on my system (10.04 LTS running as a guest in vmware player 3.1)I just want vmware-user to run before my gnome-terminals so that the desktop is resized before the terminals run.
View 1 Replies View RelatedHow to change gnome startup background under squeeze? I mean the beackground from user login mask.
View 3 Replies View RelatedI recently upgraded to a Intel i3 cpu and Intel H55 motherboard. This was from an old P4 machine that was running Slackware 13.0. The machine is a single connection to the internet through a cable modem. I moved the hard drives over, and found that dhcpcd would not work with this board in either Slackware 13.0 or 13.1 (after updating). I tried both the Gigabit onboard Lan, an old PCI ethernet card and installing the most recent version of dhcpcd. No luck. Dhcpcd would negotiate the lease with my cable modem, assign an IP address. But after that the process stalled. The internet was unreachable, and no nameservers were printed in /etc/resolv.conf. Manually killing dhcpcd and entering: "dhclient -4 eth0" got me on the internet without a problem. As this appears to be a lingering problem with dhcpcd, I am going to try to use dhclient permanently. Has anyone else moved over to using dhclient? If you have modified your startup scripts in /etc/rc.d to use dhclient.
View 3 Replies View RelatedWhen I attempt to create a USB Live Xubuntu setup via the Startup Disk Creator, the settings for the Persistent drive are disabled/gray. When I perform the setup, no extra space is reserved for the persistant drive.
I've used the same USB drive for Live Ubuntu installations in the past and had no problems.
Does the USB Startup Disk Creator work with Xubuntu?
I'm not referring to "Gnome Login Sound" I'm referring to the login screen sound. Those 2 drum pats you hear when you start up Ubuntu, before logging in. I was using Macbuntu, and have switched back, however it never changed my login sound back to what it was suppose to be. I knew how to change everything else back, so i didn't just run a script with out knowing how to clean up after it, however this is the only thing I don't know how to do. It keeps looking into the macbuntu folder to get the sounds before i log in. Probably being able to simply set the sound theme in the login screen would fix this issue. I've tried using Ubuntu Tweak, but no such luck. If no one can't find a solution I'll just have to use the other folder from now on >.< However I'm quite certain there's a script somewhere, that I can edit. I just need to know where it's at.
View 7 Replies View RelatedBefore karmic while I was using Jaunty, I used to do it all the time, play my favorite sounds wherever I was them, startup, error, login, logout, etc etc... I found it in System>Preferences>Sound...
But when I do the same in Karmic, the opening dialogue box doesn't give me an option to change every sound specifically, instead, although it gives me option to choose a sound theme of my own. But for that I must first compile a theme and then install it / place it in sound themes directory etc etc.
How would I change sounds for particular events without having to compile a whole new theme (customizing the current Ubuntu sound theme)...
how do I create sound themes for Ubuntu and them install them in my Ubuntu?
Is there any way to change the startup sound in netbook remix edition 10.04?
View 1 Replies View Relatedi am using linux for couple of years. suddenly i a question arises in my mind. Before loading kernel during booting linux box initrd image loads necessary real mount point, file system, modules etc. but how initrd loads them ?? is there predefined modules list stored in initrd image or something else....what is the background procedure of it
View 1 Replies View RelatedI'm currently running Xubuntu 10.04LTS as my main distro, but would like to also run Fedora 13 on the same machine.Therefore, I'm more so just after a bit of steer of the best plan of attack to achieve this - best procedure to partition the drive (80gb / i686) and install Fedora etc.
View 1 Replies View Related