I recently installed Ubuntu according to the instructions on the site. However, now when I start up my computer I see Ubuntu, Ubuntu recover (something like that), two windows 7's, and windows vista. Before I installed Ubuntu I only had windows 7. How can I clean it up so that I only see Ubuntu and Windows 7?
View 7 RepliesI just fresh-install upgraded from Jaunty Jackalope to Lucid Lynx, on my dual-boot netbook. Now, the startup menu does appear when I boot up, but only for a fraction of a second! Default bootup is of course, Ubuntu, but since the menu flashes by so fast, there's no way I can access the other choices, including Windoze Expee.So I installed Startup Manager, and set the timeout to 10 seconds. (And to "show text during boot".) Still, the startup menu flashed by, no delay at all, not even a second! Tried setting timeout to 100 seconds, and once more,(Examining grub.cfg shows the timeout was changed to my specs...I just viewed the file.)I searched for bootup problems in ubuntu forums, but did not find any problem similar to mine. My situation seems to be that I simply can't get the startup menu to delay, so I might access it.
View 5 Replies View RelatedInstalled Ubuntu on a 40 GB partition side by side with Windows 7 currently installed. I have had this exact setup before. Problem, boot menu never shows. The system boots into Ubuntu automatically. Windows seems to be intact and accessible. How can I get the boot menu to appear at startup?
View 9 Replies View RelatedI'm currently running Lucid Lynx, which installed the Grub 2 Boot loader which it currently lists three different Linux kernels. My problem is this:
1. How do I edit the menu to either remove or comment out one or more of the kernels?
2. Can I remove any of the kernels I don't want, which files do I remove, and will doing so compromise my system.
Would like to eliminate from the Grub menu of startup options all but the latest kernel update? Have made some attempts, but don't have authority is the message.
View 2 Replies View RelatedI have serious problems hiding the Grub menu at startup.
What I want to do is simple boot into the first (and only) item without showing the menu to the user.
I have removed everything on the system so the only option is "GNU/Linux, with Linux 2.6.32-30-generic" in the menu.
My /etc/default/grub is like this:
Code:
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
[Code].....
No matter what I do I always get the same result:
The menu is shown and no countdown!
It's like grub isn't reading the changes of /etc/default/grub
why I'm unable to hide the menu?
I'm using in the server 8.4 and installed the package startupmanager which is GUI, through this package I can show the text during boot, unlike in the 9.10, I checked the "show the text during boot" same I did in the 8.4 bu It's not showing the text and still show the splash...
how to change it direct from shell instead of the stupid GUI
When I attempt to create a USB Live Xubuntu setup via the Startup Disk Creator, the settings for the Persistent drive are disabled/gray. When I perform the setup, no extra space is reserved for the persistant drive.
I've used the same USB drive for Live Ubuntu installations in the past and had no problems.
Does the USB Startup Disk Creator work with Xubuntu?
Using StartupManager (as Quackers had suggested) I do indeed have Windows as my default boot, although it appears at the bottom of the menu. See Dilemma 1 below for that detail.
Dilemma 1:Grub2 has set up the boot menu so that Windows is the last item on the menu. This is because the Menuitem entries for the Ubuntu kernels are generated by script 10_linux, while the Windows Menuitem entry is generated by script 30_os-prober. Of course, in generating /boot/grub/grub.cfg, the 10_linux script is executed before 30_os-prober, dictating the order of their appearance on the menu.
I'd like to see Windows as the top menu item. Under grub, I would edit /boot/grub/menu.lst, pull the Windows menu item out of the "Automagical" section and voila! It stays on top no matter how many times I upgrade the kernel. While I could possibly do the same with /boot/grub/grub.cfg (see thread "how can I change the order of the boot menu?" for the suggestion) we should all know by now that the next time I update the kernel, my changes will all go away, because we are not supposed to edit that file by hand.
Dilemma 2: As I download and install kernel updates, all the old kernels still show up on my boot menu. My concern is that eventually the sheer number of Linux kernels will render the boot menu unreadable. This is especially of concern if I cannot get Windows to the top of the boot menu. Under grub, I used to edit the menu.lst and comment out the listing of any kernels more than 2 versions old. Now, how do I arrange this omission? A manual edit of 10_linux will be acceptable, provided it still displays the 2 or 3 most recent Linux kernels and their corresponding memtests.
I'm brand new to Linux and Ubunto 10.04.On the menu bar at the top of my desktop I seem to have attracted some kind of bug!The Log Out Symbol repeats itself across almost the entire menu bar and I cannot remove it. If I remove other buttons from the menu the space is immediately replaced by more Log Out Buttons.When I hover on the icon I get the message 'Log out of this session to log in as a different user' and when I right-cllick to click on 'Remove from Panel' or 'Move' nothing happens.It is not possible to right-click on another part of the menu bar to change the Menu Properties.
View 1 Replies View RelatedI just found some cool icons and I want to try them to see if they match my theme but I do not know how to change the Icon.
View 2 Replies View RelatedI wanna find a way to change the Computer menu from Kickoff.
View 6 Replies View RelatedI changed it and got it working a long time ago but i installed 10.10 (great work BTW ) and have forgotten completely.
View 6 Replies View RelatedI have Empathy set to start when I login, and when I turn off my computer, it is always still running. I also usually have Evolution, Liferea, and Rhythmbox running. All of these applications usually work fine the next day when I turn on my computer. However, for the last few days, Empathy has been starting without a menu bar. In one instance, Rhythmbox was also menubar-less. Now, Empathy is always without a menu bar. If I ever need the menu bar, I have to restart Empathy. Can anyone tell me why this is happening? I am unable to provide a terminal output since this application starts up with my computer. I have provided a screenshot of Empathy. I think I have a faint idea of why Empathy is without a menu bar. I read something somewhere about an XML file that contained the menu bar contents. I think that since I shut off my computer without closing these applications, that file has been corrupted. I have no idea why everything works fine once I restart Empathy, though. If you cannot answer this question, perhaps you could tell me if it is safe to shutdown Ubuntu with applications still running. In OS X, it will automatically tell your applications to quit safely, then turn of the computer. I hope Ubuntu doesn't just force quit any open applications. I am using Ubuntu 9.04 32 bit with the latest updates. I am using Empathy 2.26.1.
View 9 Replies View RelatedThe first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
I'm running maverick netbook remix on an asus1015pe eeepc. I recently switched from the unity interface to "ubuntu netbook 2d" - the one they say resembles the 10.04 netbook interface. I really like it - fast, crisp, and intuitive - but there's one thing I'd like to change, if possible. Right after login, there's a full-screen translucent menu that covers the 1st workspace. If I wait a few seconds, I can make it go away by clicking the "desktop" button in the bottom left, but is there any way to make it so it doesn't appear at all? so that after login it goes right to a clean desktop.
View 2 Replies View RelatedI need to add a program to my startup menu (webserver which needs sudo for port80). I follow their directions, but it breaks the program and no pages are served. I will not be home to guide wife and kids every time they boot the machine to sudo start the program. How do you start a program at boot, as root or sudo start.
View 2 Replies View RelatedThere's a growing list of "Kernel" versions in the boot menu. I just want Ubuntu and Windows, how do I get rid of the superseded kernel entries?
View 9 Replies View RelatedI have put som programs in System -> Preferences -> Startup. That works fine, except that Synaptic starts without asking for a password, and therefor also without superuser privileges.Is there a way I can change the command so that it will ask for a password?
View 1 Replies View RelatedI have followed this post: http://ubuntuforums.org/showthread.p...lay+resolution And when I restart it goes back to having the edge of my window (scrollbar) cut off. I added the increase_resolution.sh to my startup menu but I guess I don't know the command to MAKE it start at startup. (That is what "command" means in the "Edit startup program" menu, correct?) If I go into usr/local/bin and click run it works, but if I can execute it automatically, that would be great.
Also, I have added an account(?) for my daughter and when she is finished and I try to log her out the display goes nuts and does not correct itself. I assume it has to do with this since when I restart the machine (and the script isn't running) the picture is fine again. Is there a conflict between the two accounts and this script? I'm sorry if this is not making sense, I know what I want to say, but don't have the lingo/jargon down.
I have a National Instruments gpib interface PCI card on my machine. It has been working up till now.The computer was moved when I was gone, and now at start up I get two alarm beeps from the motherboard speaker, no grub menu (hidden line is commented out and time out is gtr than 0).In the past I had to lock the kernel to 2.6.32-28.55.newer kernels broke the interface...although prolly foolioshly, I did allow other system updates.
View 1 Replies View RelatedI'm interested in editing the Grub startup menu to take out some of the previous versions of Ubuntu. First, is there a reason Grub keeps the previous versions available to boot to in that list? If it is just in case of a problem with the new installation wouldn't it make sense to only have the most recent previous installation? Anyway here is the problem, when I run: Code: "gedit /boot/grub/menu.lst"
The editing program opens the file named "menu.lst" but the file is empty. How is it possible for this file to be empty yet I have multiple boot options and they all work? Does anybody know what I am running into here?
I was wanting to use StartUp-Manager to increase the resolution of the GRUB menu and the boot logo screen. Changing the resolution for the GRUB menu works fine. But the Ubuntu logo that should show up during the boot process is all scrambled across the screen. I tried multiple resolutions to fix it and none of them work. How do I restore everything back to their defaults? I tried putting the numbers all back to where they where when I first ran StartUp-Manager but that didn't fix it.
View 4 Replies View RelatedYesterday I upgraded my Ubuntu 10.4 to new version 11. In during installation I don't really remember which option I choose for installing Ubuntu root direction, but after installation completed computer asked for restarting. I restarted computer, and after I restarted the computer, computer should bring up Menu to choose Windows Or Linux, but this time automatically after a few second screen turn black and than Ubuntu show up. But I don't want that because I want choose Windows, and now I don't have any Idea how should I bring the Menu back.
View 3 Replies View RelatedThe theme I have chosen in Ubuntu 10.04 (Ambiance with buttons in the upper right-hand corner) is not applied to the menu bars at boot/login. Menu and title bars should be very dark with a white font. When I boot the computer, the application title bar is correctly formatted, but the main menu bar of gnome and the menu bars of all applications are black font on gray background. When I open the theme selection (in German Einstellungen | Erscheinungsbild, in English likely something like Preferences | Appearance).
The correct theme is applied to menu bars without that I have to select the theme again; simply opening the Appearance dialog suffices. First I did not name my modified theme (showed up as first theme in the theme selection dialog, user modified). In trying to solve the above issue I gave the theme a name, but the strange behaviour persists. Where I can make the theme automatically and completely applied at boot.
I'm encountering an unusual problem with GRUB 2. Whenever I start up my system, my BIOS'es load and do their thing, and then hand the show over to GRUB, which is supposed to not appear or do anything because my GRUB countdown is set to 0, but instead I get two errors like this that appear for about 5 or 10 seconds (greatly delaying startup) and then Xubuntu, the first entry on my Grub menu, loads: (I set GRUB to automatically boot my first entry):
Code:
error: no suitable mode found
error: unknown command 'terminal'
I recently installed Fedora 14 on an old Dell server (Pentium 4). It works fine, except that it somehow includes an extra startup step, in which I have to choose between two different grub versions. Here is the screen I get:
GNU GRUB version 0.97
Fedora (2.6.35.11-83.fc14. i686)
Fedora (2.6.35.6-45.fc14. i686)
Press enter to boot the selected OS, 'e' to edit the commands before booting, 'a' to modify the kernal arguments before booting, or 'c' for a command-line. I always select "Fedora (2.6.35.11-83.fc14. i686)" because I presume it is the latest version. Is there anything I can do to automate the choice of "Fedora (2.6.35.11-83.fc14. i686)" and avoid this extra step? On another subject, I have already modified the custom.conf file to eliminate the login screen step.
I'm running Karmic with an NVIDIA GeForce 6600, normally at 1280x1024. Just during the past week, the resolution has started spontaneously changing to 1024x768, just after I type the password to login. I get the Ubuntu splash screen with the animated light thingy underneath, then the screen flickers and it goes to 1024x768. I have tried changing driver but this has no effect.
I then have to change it manually using the Nvidia X Server settings utility, which is fine. I can then save X settings into /etc/x11/xorg.conf but next startup it does exactly the same again. I have seen a lot of posts in which Ubuntu leaves users stuck in a low res, or even tries to put them into an unsupported res, but nothing quite like this. Is there a Gnome setting somewhere that defines screen res at startup??
I cannot find where i can change the startup sound for 9.10. Everywhere that i have read so far has me go to System->Preferences->Sound and there was supposed to be a tab there for logon and logout sounds. I do not have that tab in my sounds screen.
View 3 Replies View RelatedI have a dual boot windows 7 and ubuntu karmic and by default whenever i turn on my system it automatically boots into ubuntu but i want windows 7 as my default boot up os, so can anybody please suggest what should i do.
View 3 Replies View Related