I just upgraded from SuSE 11.1 to 11.3.On my 11.1 system I had Firefox 3.6 installed and worked fine.Now on the 11.3 system I have of course Firefox 3.6.I only cannot access my edit- preferences. The whole -edit- menu is empty.I de-installed thru Yast2 the Firefox application, restarted the computer and installed thru Yast2 again the FF application. Unfortunately the -edit- menu is still empty.
View 9 Replies
How to change:
(1) My preferred File Management program, the one that kicks off when I use Places? and
(2) The amount of time before the display is put to sleep?
I DO NOT WANT TO USE A GUI FRONT END to do this. The reason is (1) my preferred File Manager, Xfe, is not listed as one of the options by Preferred Applications. And (2) Power Management Preferences allows 10 or 30 minutes before putting the display to sleep but I want 20 minutes. I need to know what files contain these configurations so I can edit them directly.
bug with nautilus 2.26.3? It seems to be an issue on the gnome side rather than on Fedora's side because a Debian bug report has pretty much the same error that I'm getting.
[URL]
1. Where do I post reports of minor bugs?2. I think I found a minor bug...When you first install Ubuntu and log in. If you of the applet thing on the top bar and click the edit button next to 'Locations' the clock preferences will pop-up.Now if you click on the general tab you will see by default that the clock applet thing should show you the time,temperature and weather...Yet if you look and the applet there is no notification of the of the temperature and weather.I tried to see if un-checking them and closing then opening them up again and re-checking would work but that has no effect.I think this is a minor bug in ubuntu and/or gnome and I would like and update and/or for Ubuntu Maverick Meerkat to correct this.
View 7 Replies View RelatedI have just installed F11 and want to change Nautilus to default Ubuntu and not open each folder in separate window. But I can't go to Edit/Preferences.Nautilus keeps crashing and I get this report:Quote:
Distribution: Fedora release 11 (Leonidas)
Gnome Release: 2.26.3 2009-07-07 (Red Hat, Inc)
BugBuddy Version: 2.26.0
[code]....
On my system, System->Preferences->Software Updates, as best I can determine, completely ignores the "Check for updates: " setting. It looks as if, regardless of what I set, I get daily checks. Is anybody else experiencing this? Anybody got a fix? I like the idea of having the system check for me, so I don't want to just pitch the program.
View 3 Replies View RelatedWhat this little N is that appears in the corner of the prefs icon in the latest Chromium 10? It goes away when I open the settings and it's driving me crazy as to what it is.
View 9 Replies View RelatedI want to change Weather Applet preferences which is present in the panel of GNOME /openSUSE.But seems to be locked.Please let me know as to how once can change the default settings.I have already used the weather in the time applet(works well).But i want the weather in a separate applet.
View 9 Replies View RelatedEvery time I open "sound preferences" from either the sound applet or the preferences menu pulseaudio CPU usage goes right up to 100% and proceeds to lock up the entire computer. pavucontrol, paman, and all the other pulseaudio utils work fine, except for ubuntu's sound preferences. It affects a new account.This is my 10.04 desktop that is affected. I have just the default pulseaudio config.
View 3 Replies View RelatedI was thinking of converting openproj to kplato, but I can't edit the resource I've added. Even when adding the resource all I could do was add the name and work type.
I didn't find anything in a google search, or at koffice.org/kplato, or in the deskop help.
How do I edit the initials, email, available... all the other resource fields?
I'm using Gnome on openSUSE 11.3. I wonder. How do you edit screensaver properties? For example get phosphor to display a stream of news? You could specify in Fedora and Ubuntu.
View 3 Replies View RelatedIs it possible to view and edit db3 files in linux? OpenOffice does not do it and dbview says it can't read version 83. Just wondering. I am not really firm with databases, but i remember that i did view databases in linux.
View 3 Replies View RelatedI have some pdf files on a usb stick which I want to edit, Evince cannot do this, and if I try to open in Libre there is no option to import pdf there either. Is there an app. or plugin for libre to allow this
View 9 Replies View RelatedI need to add the following line in /etc/modprobe.d/50-blacklist.conf ..
Code:
In order to get wlan working, but I cannot seem to edit the file .
I tried:
Code:
Code:
I also tried manually opening the file but it is read-only . (I did not set my root folder to read-only, however .)
I even wrote a script in /home/exo/.gnome2/nautilus-scripts that should let me open files as root, but nothing works ..
This is my script:
Code:
If I manually add an email address, it will appear in the recent address's list. How can I edit this list so that I can add them to my contacts.
KDE 4.3.5, KMail 1.12.4
I want to edit files while in runlevel three. I am trying to learn how to navigate my entire system via CL. Whenever I use gedit in runlevel three, is says, "cannot open display"
Is there a utility to edit files without X11 fired up?
I'm using the default media player 'Banshee', and when I select multiple tracks to edit bulk information, ie Album Name or Genre, it's only changing the track I right click on, regardless of multiple being selected.Is this the default action for Banshee, and if so, is there a way to change multiple track information at once.
View 2 Replies View RelatedHow can I edit/create HTML document and run them in linux?
View 7 Replies View RelatedHow do I add/edit a desktop icon on kde4.6? I earlier versions, we could click on the gear wheel to change or add an icon. I have a few apps that do not show an icon (even though the icon is in kickoff menu - one is pingus)
View 9 Replies View RelatedAmarok won't edit tags in MP3-files. All the options are greyed out. I'm using OpenSuse 11.3 64-bit with KDE 4.4.4, and Amarok v. 2.3.0.
View 2 Replies View RelatedI have an OpenSuSe 11.0 running openldap (managed by yast) for user authentication on some services.Is there an easy way that I can provide for users to change their own passwords (Preferably a web interface)?
View 1 Replies View RelatedI can't edit the partitions in the install setup. When I go tyo the Expert Partitioner, I see a hard disk (sda) with no partitions or user devices, and 2 RAID devices:* /dev/md126 with 465.76 GB, not encrypted, type RAID1 (no info for chunk size, parity or file system)* /dev/md127 with 2.2 MB, not encrypted, RAID_UNKNOWN (no info for chunk size, parity or file system)I didn't try to do anything in the RAID part because I wanted to preserve Win 7, but I dared to add a partition in the "hard disk" (sda) and I get an error: "the disk is in use and cannot be modified".
The behavior of Ubuntu 9.1 x64 installation is much alike.I have googled with every keyword combination I remembered, but I can't find anything that gives me a clue to what may be happening.I have already tried the 3 SATA configurations (the IDE that works with the installed Win 7, AHCI and RAID), but the result is always the same. Now the strangest thing is that fdisk and parted correctly identify the partitions. As far as I remember, parted isn't able to do modifications and fdisk says that the boundaries of the first, tiny partition, doesn't match the number of cylinders (or something like it). However, I was able create a partition with fdisk on the empty space and format it, delete it again and repeat the process a couple of times with no errors. The partituions are signed as msdos.
GParted from Ubuntu also shows the partitions, but I didn't try to do any modifications, namely because I don't think that it can solve my problem and I don't want to risk installing windows again.The hardware is brand new, a Asus M4A785Td-V Evo with an Amd Phenom II X4 965 and a WDC-WD5000ACCS-0 500 Gb HD. My lazyness made me asking the guys from whom I bought it to install Win7 Ultimate 64 in a NTFS partition, leaving half the disk untouched.y assure me that it is a "plain vanilla" ("next, next, next") installation . I guess I could try to see if I could do the partition setup in the "RAID" part of the Expert partitioner, but I have strong doubts that it solves the problem and it would be quite boring to conclude that I ruined the windows installation for nothing.
I've got myself in a bit of a pickle.I've got 1 hard disk drive and was trying to load a second external drive.I tried to mount the 2nd (external) drive by editing /boot/ grub/ device.map but I must have made an error, because now it boots directly into sda1 openSUSE 11.1 and when I try to look at SDA2/SDA3 it say's Invalid System Type. Presumably because they're formatted with Ext4. So I can't edit back my device.map file.What I want to do is boot into SDA3 OpenSUSE 11.3. Would anybody know why it's only booting to SDA1 and/or have any suggestions to get me back booting to SDA3? This may be a 2 step process, because I may have to boot to SDA2 first so I can edit back my /boot/grub/device.map on SDA3 before finally booting to SDA3.
View 6 Replies View RelatedI'm relatively new to Linux and to openSUSE. I've been using 11.3 as the OS on my home server for awhile using a GUI (Gnome). I recently created a new server which is much more powerful and would like to get serious about learning the ins and outs of the system. I've learned some basic bash and would like to install 11.4 on the new server. I have two questions about this. The first is: does it add any system overhead if I install KDE but set the default runlevel to 3? I know that running the GUI takes up system resources, but I'm new enough to the system that I'm not 100% comfortable yet not having a GUI backup. On the other hand, if having a GUI installed eats up resources (other than the HDD space for installing it) even if I'm only using the system in runlevel 3, then I think I'll forgo KDE and install it as text only and just bone up on bash.
My second question is: is there a file I can edit to customize the runlevel 3 console? I just installed 11.4 on my HP Mini using KDE but defaulting to runlevel 3, and I really like the background picture and little SUSE lizard at the top of my console. Is there a way to change the background picture and logo at the top? It's probably a little juvenile on my part to want to customize this but Linux is all about choice right?
I was able to convert a Real Estate Firm from using Microsoft OSS to OpenSuse 11.2.The Real estate agents in the firm are pleased and some are not but it's the cost of doing business and saving money.I am at a cross road or should I say I have come to a bump in the road. Most of the agents create their flyers and signs in Microsoft Publisher, I tried Open Office 3.X and I'm unable to open or edit the files in question.Do have any suggestions or could you point me in the direction of a solid solution that will help me either convert the files or a program that can be used with-in OpenSuse 11.2 that can edit the files
View 9 Replies View RelatedI am running 11_4, KDE4.7 I loaded CinePaint cinepaint-0.25-3.10.x86_64.rpm from the multimedia:color_management/openSUSE_11.4 repo. It opens, but crashes if I try to load a jpg for edit or try to create a new picture.
View 8 Replies View RelatedWhere is the location of file which holds information about open with dialog? I need to edit it to change default programs that open certain files?
View 3 Replies View RelatedI would want to record/edit/save music from the microphone (convert a tape to CD). But. I start audacity, leave everything at default, record the music, and play back. It plays agonisingly slow. I can change the sample rate manually such that it sounds good, but this is just a guess (I could for example measure the recording time, and adjust the sample rate after that, such that the displayed time on the timeline fits this time). Why the hell do I need to do this? Why is the recording sample rate = playbe sample rate not producing correct output?
View 3 Replies View RelatedI cannot seem to find where the conf files for NetworkManager are stored in suse 11.3. I want to manually edit my IP address without using the gui.
View 5 Replies View RelatedEvery single time I enter the network manager to edit connections is crashes on exit. I am running opensuse on an Asus eee PC 1000HE with an Atheros network card. The crash report follows :
Distribution: openSUSE 11.2 (i586)
Gnome Release: 2.28.2 (null) (SUSE)
BugBuddy Version: 2.28.0
System: Linux 2.6.31.12-0.2-default #1 SMP 2010-03-16 21:25:39 +0100 i686
[code]....
As an extra point. I wish I could disconnect individual networks instead of just disabling networking to disconnect. I think the newer version of the network manager does this.
