OpenSUSE :: 11.4 Will Not Let Edit 50-blacklist.conf ?
Jun 17, 2011
I need to add the following line in /etc/modprobe.d/50-blacklist.conf ..
Code:
In order to get wlan working, but I cannot seem to edit the file .
I tried:
Code:
Code:
I also tried manually opening the file but it is read-only . (I did not set my root folder to read-only, however .)
I even wrote a script in /home/exo/.gnome2/nautilus-scripts that should let me open files as root, but nothing works ..
This is my script:
Code:
View 2 Replies
ADVERTISEMENT
Jan 6, 2011
I need advice in getting the original blacklist.conf of the directory /etc/modprobe.d/ because I erased and I don't know if that file could make me have some issues in the future, so if any body can lend me a copy of that file or refere me to some page where i can get it. Is for the slackware 13 32bits distro.
View 2 Replies
View Related
Sep 2, 2010
I cannot seem to find where the conf files for NetworkManager are stored in suse 11.3. I want to manually edit my IP address without using the gui.
View 5 Replies
View Related
Sep 2, 2010
Cannot edit xorg.conf on Fedora13. I do it from the root but changes is not saving.
View 7 Replies
View Related
Aug 16, 2009
I need to change a game's screen resolution in a couple of .con files, but when I double click on them all I get is success in a little pop up window. Can I move them to my computer, edit them with a text editor, and reinsert them with read only privileges?
View 2 Replies
View Related
Aug 13, 2010
What is the command I use to edit the xorg.conf in fedora?
Achieve using the following command:
View 2 Replies
View Related
Jan 17, 2011
My sample rates are out of whack and I need to edit the daemon.conf file.
However if I use
Code:
It will open the file but will not let me edit at all. If I just navigate to it I can edit it, but I can not save it!
I tried going in as root from the terminal and using the code above and I get a weird error.
Something like:
Then it says core dump.
Am I missing something to be able to edit the daemon.conf ?
View 2 Replies
View Related
Feb 13, 2010
I am running Ubuntu 9.04 on an Acer Aspire laptop and have broken my display system while trying to use the restricted drivers for the nvidia graphics card.
Basically I downloaded and activated the restricted driver. I rebooted and now ubuntu freezes on startup.
I can get access to the command line but am unable to edit either fstab or xorg.conf because ubuntu has mounted the filesystem in read only mode.
I have read and tried all the options given in this posting [URL] but because I cant read or write any of the files I cant seem to affect any change to the system
View 1 Replies
View Related
Jul 28, 2010
Trying to get this server to work and abandoned trying to do it with Xubuntu last night and installed Ubuntu server. But now I'm stuck on Samba again as I decided to use the vi editor to edit the smb.conf file and now I can't get out of it.
View 4 Replies
View Related
Feb 12, 2011
I am trying to edit my /etc/resolv.conf file while under root. After saving the changes and reboot my computer, file has not changed. I read a thread on chattr and lsattr on this fourm.(see link below) I ran in terminal lsattr /etc/resolv.conf and got the following results:-----------------e- /etc/resolv.confWhat does the dashes and e mean? I thought I would get ----ia------------ /etc/resolv.conf instead, as shown in the link. What am I doing wrong?
View 4 Replies
View Related
Jul 8, 2011
I want to edit the file ports.conf to make Apache to listen only to loopback interface as described [URL]... here ,The text extract follows
Quote:
The Listen directive specifies the port, and optionally the IP address, Apache2 should listen on. If the IP address is not specified,Apache2 will listen on all IP addresses assigned to the machine it runs on. The default value for the Listen directive is 80. Change this to 127.0.0.1:80 to cause Apache2 to listen only on your loopback interface so that it will not be available to the Internet, to (for example) 81 to change the port that it listens on, or leave it as is for normal operation. This directive can be found and changed in its own file, /etc/apache2/ports.conf
But by typing [CODE]sudo vi /etc/apache2/ports.conf [/CODE} and opening the file I am not able to edit the file After going to the Listen Directive I am not able to type 127.0..0.1, Since what I type does not appear on the screen, the Keyboard is not working. How will I be able to edit the ports.conf and other configuration files
View 3 Replies
View Related
Mar 9, 2010
After i edited my xorg.conf file to get 1280x1024 Resolution the font size in some programs is really big. [url]
View 2 Replies
View Related
Jun 14, 2010
i can't edit /etc/resolv.conf with root account (Ubuntu Server 8.02)
root@webserver:~# sudo vim /etc/resolv.conf
"/etc/resolv.conf"
"/etc/resolv.conf" E212: Can't open file for writing
root@webserver:~# ls -l /etc/resolv.conf
-rw-r--r-- 1 root root 287 2010-06-14 15:20 /etc/resolv.conf
View 9 Replies
View Related
Nov 12, 2010
I am trying to edit my grub.conf file. I am logged in as root. It says it is a read only file. I have tried to set permission with chmod 777 and also tried through GUI. Using VI it says it's a read only file. Using nano it will not write either. I have two choices on boot up. I want to automatically go to second automatically. First at the moment is CentOS-4 i386 (2.6.9-55.ELsmp) and second is CentOS-4 i386 (2.6.9-55.EL).
View 9 Replies
View Related
Jul 10, 2011
I am trying to install debian as a DC but on reboot I get the "Input not supported " error. I switched to virtual input and login to try to edit the xorg.conf file but created a new file instead because the xorg.conf file is open by the installation. How do I close it so I can edit it and continue. I am afraid to start a new file as I am not sure what is in the ools one.
View 2 Replies
View Related
Feb 4, 2011
I intend to configure my extensions.conf and sip.conf but asterisk in configured on a remote host in another city, i have to travel there to configure it. Is there any way to access it using internet instead of vnc and teamviewer. how can i use telnet to access it or how can i ssh the remote host.
View 3 Replies
View Related
Mar 14, 2009
I have successfully installed fedora 10 and have rpmfusion in my /home/ directory. i don't know how to edit yum.conf to make yum install from this local repo. i tried once. But when i tried to install vlc i got an error saying some lib****** files are missing and missing dependencies.
View 2 Replies
View Related
Jan 31, 2011
I'm trying to set up some shares on this pc and every time I try to edit the /etc/exports file I get this error. I get the same error when I try to edit /boot/grub.conf file or any other files. Does not matter what editor I use. I'm running f14.
View 3 Replies
View Related
Jan 16, 2010
i have a lenovo g550 with nvidia geforce g 105m i tried to install its driver on fedora 11 and 12 and i have followed the instructions of setup as in fedora sites and forums, the problem is after installation i have 6 equal screens 640*320 and i don't know how to edit xorg.conf
View 4 Replies
View Related
Jan 2, 2011
I need to blacklist any incoming/outgoing connections to Google. I need to add filter something like this: *google*
View 5 Replies
View Related
Dec 23, 2010
after yesterday's update to kernel 2.6.35.10-72 my grub.conf didn't get updated and ll /boot shows that neither vmlinuz or initramfs exist for that kernel. uname -r though tells me I'm running 2.6.35.10-72.
How can I do that? and on another more reallystic matter how can I generate the missing files so I can manually update grub.conf?
View 2 Replies
View Related
Aug 3, 2010
I had some trouble with the netinst CD and I had to install lenny with the 6DVDs instead. My internet connection only works after I edit the interfaces and resolv.conf files manually. So my question is: can I do that from the netinst CD before it actually needs the connection to install everything? (otherwise I'll just need to use the DVDs.
View 4 Replies
View Related
Apr 27, 2011
I can connect to the internet and browse. I'm wired and using DHCP on a Windows network. Updating Ubuntu or downloading programs takes hours for 52MB of updates. Why? I read some articles that mention Network Manager needs to be enabled at the .conf file. Can I edit this using GUI or command line only?
View 9 Replies
View Related
Jan 26, 2011
I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:
in xorg.conf:
Code:
Section "Device"
Identifier "Device0"
Driver "nvidia"
[code]....
My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?
View 5 Replies
View Related
May 19, 2010
for the life of me I am unable to get this module not to load
root@milomak-mac:~# cat /etc/modprobe.d/blacklist.conf
# This file lists modules which will not be loaded as the result of
# alias expansion, with the purpose of preventing the hotplug subsystem
[code]....
View 8 Replies
View Related
Mar 29, 2009
I have a server setup that is getting repeatedly hit by the same IP address it has tried accessing my vsftp and /drupal/cron.php. For security reason I have disabled vsftpd while I am not using it. The webserver on the other hand I need to leave running.
Code:
- pam_unix Begin -
vsftpd: Unknown Entries:
check pass; user unknown: 2708 Time(s)
authentication failure; logname= uid=0 euid=0 tty=ftp ruser=Administrator rhost=211.161.251.123 : 2282 Time(s)
authentication failure; logname= uid=0 euid=0 tty=ftp ruser=administrator rhost=211.161.251.123 : 426 Time(s)
- pam_unix End -
I would like to be able to add the ip to a blacklist. Additionally I would like to whitelist my own ip when I am working remotely, my remote location doesn't match my reverse dns and my server gives me an error at the end of the day that someone (myself) might be trying to break in. Running Fedora Core 9 in case it matters.
View 4 Replies
View Related
Jun 1, 2009
I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
View 3 Replies
View Related
Jul 25, 2010
phpmyadmin files are in usr/share/phpmyadmin but i cant find anything in my apache2.conf or httpd.conf files that point to that directory.How do I find the route taken from the Server root "ServerRoot "/etc/apache2"" to the phpmy admin files.
View 5 Replies
View Related
May 22, 2011
I have used nVidia my entire linux life (about 5 years clean and sober from M$). Recently, I have switched over to an ATI Radeon HD 5550 card. After many trial and error setups, I finally got the resolutions and screens set properly with a xrandr command, which I have now added to a shell script in ~/.kde4/Autostart. It has worked for me for a while now, but I really would like to get it set in the xorg.conf.d files so that I don't have to wait that extra few seconds after login for the screens to fix themselves.
Is there an easy way to take what xrandr does and export it to the xorg.conf.d files? If my video card recognizes my default monitor as DFP2 and the tv that I only sometimes use with this computer as DFP1, how can I ensure that the login screen for openSUSE/KDE4 appears on my default screen (an issue that drove me nuts a few months ago when I tried Ubuntu to see what all the fuss was about)?
My xrandr command that I use to fix it all is:
xrandr --output DFP2 --auto --pos 0x0 --primary --output DFP1 --auto --right-of
I am using the proprietary Radeon driver from the ioda repository. DFP2 is a monitor which has a optimum resolution of 1920x1200, and DFP1 is an 1080p HDTV. I can not reverse the output plugs for the screens even though my monitor is an HDMI monitor because I use the actual HDMI port on the video card to output audio to the television and the other plug is a DVI that I convert to HDMI for the monitor.
View 1 Replies
View Related
Apr 2, 2011
I want to blacklist one module in RHEL 4.5. In RHEL 5.X we can remove the module using modprobe and then blacklist it in the file /etc/modprobe.d/blacklist to make it permanent after reboot. But in RHEL 4.5 there is no such file like /etc/modprobe.d/blacklist. So how to blacklist a module in RHEL 4.5
View 3 Replies
View Related
