OpenSUSE :: Converting Or A Program That Can Edit Microsoft Publisher Files?
Mar 24, 2010
I was able to convert a Real Estate Firm from using Microsoft OSS to OpenSuse 11.2.The Real estate agents in the firm are pleased and some are not but it's the cost of doing business and saving money.I am at a cross road or should I say I have come to a bump in the road. Most of the agents create their flyers and signs in Microsoft Publisher, I tried Open Office 3.X and I'm unable to open or edit the files in question.Do have any suggestions or could you point me in the direction of a solid solution that will help me either convert the files or a program that can be used with-in OpenSuse 11.2 that can edit the files
View 9 Replies
ADVERTISEMENT
Apr 27, 2010
I have been sent some file sI need to open but they are in .pub format. Having them sent in another format is not an option. I need to open them on Linux. Is there a tool which I can convert it into another format (preferably PDF) rather than having to mess around getting publisher installed on wine etc etc?
View 1 Replies
View Related
Apr 15, 2010
I haven't put this in the forums for any of the separate programs, because im having the same problem in all of them, im thinking maybe its a problem elsewhere?I recently got a Canon DSLR. It can save in Raw format, I use this function. Canons Raw format is "Whatever.CR2"F spot viewer and all editor programs see then and 'preview' them with no problem. The images appear to have no problem until you load them into GIMP (with UFRAW) UFRAW standalone, RAWStudio etc.
They load, but only as a small vertical rectangle. Often very purple in colour.I thought maybe it was something wrong with just the way it looked, so I just loaded one, went save as (a jpeg) and then loaded it up, it loaded as a small picture of the same purple-haze bar.Have I done something wrong? I googled it, downloaded UFRaw, even Ubuntu studio, same problem before and after studio installation. All these programs claim to read raw images.Just as an example, In RawStudio:I load up the folder of raw images. I can see all the images clearly with no problems in the preview slider up top. I can scroll through them and see them all no problem. When I click on one, it loads in the editing box as some weird bar (always vertical in orientation) often faintly resembling part of the photo but with seriously acid trip colours. Eg massive purple hazes, green everything etc.
View 4 Replies
View Related
May 20, 2010
I used dvgrab to pull the video off of my Cannon HV30 HDV camcorder. Now I have a bunch of 5 minute clips at about a gig each. I need to edit these together and use a better file type. What should I convert to, and what program should I use for encoding and editing?
View 1 Replies
View Related
Jun 11, 2011
Has any one got this to run on Fedora 14. I have it running just fine on Ubuntu 10.04 but it will not boot up under Fedora. It seems to install just fine.Best program I have found to make or edit epub files. Sigil
View 1 Replies
View Related
Aug 29, 2010
Does anyone know if there is a program that behaves the same as Microsoft's OneNote program for linux?
View 3 Replies
View Related
Apr 21, 2010
i need a command line application for converting .pptx (PowerPoint 2007) Files into .ppt (PP 2000/2003/XP)Files.
Is there any tool existing or is it even possible to do the convert via openoffice?
The only requirement is, to do that via command line or a script which can be executed from the command line.
View 3 Replies
View Related
Jun 23, 2011
i am running ubuntu 10.04. I am looking for a converting program and I also need a DVD making program. I'm unsure if one comes preinstalled already.
View 4 Replies
View Related
Aug 5, 2011
I have many .mkv files that have soft subs I'd like to convert so I can play them on my iPad. What Linux tool can I use to do this more of less automatically?
View 5 Replies
View Related
Aug 7, 2010
Is it possible to view and edit db3 files in linux? OpenOffice does not do it and dbview says it can't read version 83. Just wondering. I am not really firm with databases, but i remember that i did view databases in linux.
View 3 Replies
View Related
Jun 11, 2011
I have some pdf files on a usb stick which I want to edit, Evince cannot do this, and if I try to open in Libre there is no option to import pdf there either. Is there an app. or plugin for libre to allow this
View 9 Replies
View Related
Jul 23, 2010
I want to edit files while in runlevel three. I am trying to learn how to navigate my entire system via CL. Whenever I use gedit in runlevel three, is says, "cannot open display"
Is there a utility to edit files without X11 fired up?
View 5 Replies
View Related
Sep 2, 2010
I cannot seem to find where the conf files for NetworkManager are stored in suse 11.3. I want to manually edit my IP address without using the gui.
View 5 Replies
View Related
Dec 1, 2010
I just dual booted Open SUSE on my computer, and am pretty happy with it. But, in order to use my wireless card for it, I need to install a driver. The wireless card is a Realtek 8191 SE. I've downloaded a driver, but I have no idea how to configure it. I've tried pasting the files into /lib/firmware, but it won't allow me to edit or paste any files into the folder.
View 3 Replies
View Related
May 8, 2010
Does any know of an alternative???
View 4 Replies
View Related
Dec 15, 2010
Do I have to have WINE to get it to work? Will it run MS Publisher 2003?
View 2 Replies
View Related
Oct 14, 2010
installed ubuntu on hard drive by mistake, can i access my microsoft files or recover them?
View 5 Replies
View Related
Apr 14, 2010
What are the proper ffmpeg instructions for converting .ogg files to .mp3?
I have followed several formulas, but each time I get an error message.
View 9 Replies
View Related
Nov 6, 2010
I am looking for a program that will take multiple avi files and join them into one file
View 8 Replies
View Related
Jul 30, 2011
I have an.exe file that I want to open in wine by default. I already did "open with" and chose wine file by accident. How to I make the default wine?
View 1 Replies
View Related
Apr 18, 2010
Is there a way to disable preload for a given process and/or a set of files? I'm having an issue with MLDonkey, which I configured to run as a service. Apparently, preload is trying to pre-load the temporary files lying under MLDonkey working directory (which are huge), and tis is causing a massive slowdown when booting
View 9 Replies
View Related
Jun 11, 2010
I was trying to edit some files in /usr . so I did "chown -R username /usr" as root . after editing, I did "chown -R root /usr" !!!!! it made me unable to open Yast and VirtualBox and many other features and applications . is there anyway to fix this ? I think some files in /usr was not owned by root,
View 4 Replies
View Related
Jan 22, 2010
I am running a linux server and am familiar with scp somewhat, and have used it successfully in the past. But that was talking to another linux server. Thing is, here I need to talk with a Windows server. How do I do that. In addition, their server may require a VPN, which seems to add another layer of complexity.
View 3 Replies
View Related
Oct 3, 2010
I just passed a friend from Windows to Ubuntu Lucid.Everything fine, but he is a crossword maker addict. Under Windows, he use MS Publisher to make his crossword grids.With Linux, it's more difficult For now,he use OpenOffice Writer, with a big table, but the table is not very regular.I tried to install Scribus, but it's a professionnal PAO software, not a "easy to use" software as MS Publisher (that's a big ****, of course, but easy to use for neophyte)...I also tried to use free software or shareware for windows, but thera are always works with an algorythm crossword generator, when my friend want to place the word where he wants ! That's the goal and his passion !So I'm still looking for a PAO software very easy to use, or specific program (even Windows program with wine, even not free).
View 5 Replies
View Related
Aug 27, 2010
when i scan some documents they are saved as .PNM files. what I would like is JPGs.
does anybody know any good ways of batch converting pnm files to jpeg files.
View 9 Replies
View Related
Mar 4, 2010
I am converting .tif images to .eps and am trying to do a bunch of them at once. I have tried
Code:
convert *.tif *.eps
but this doesn't do it.
View 2 Replies
View Related
Jun 10, 2010
I have heard that tclient v2 is much better than the one that comes with ubuntu or even remmina and have found a rpm package for it.
I search and found I should use alien to convert to a deb so I can install; I am getting the following error :-
sudo alien -k tsclient-2.0.2-1.fc11.src.rpm
error: incorrect format: unknown tag
mkdir: cannot create directory `tsclient-2.0.2': File exists
nable to mkdir tsclient-2.0.2: at /usr/share/perl5/Alien/Package.pm line 257.
I am running alien from the directory where the .rpm file is and while the extraction is done the creation of a deb file is not.
View 5 Replies
View Related
Nov 16, 2010
I copied some songs off a CD and wanted to convert them to mp3. Is there a program that I should have used to rip them that would have done that or is there a program that will convert them for me?
View 9 Replies
View Related
Jan 22, 2011
Is there a way (strictly in Ubuntu -- well I am viewing the noteworthy files under wine) to convert these files to lilypond format? I have tried the nwc2ly converter, but so far without any success. Any thoughts, or suggestions? You see I have a friend that has done a lot of Orthodox Music in NWC, but I want to get it into Lilypond as it will look better, and then I can easily convert to pdf, and easily change things if needed, etc. But I would rather not have to print and retype it all.
View 1 Replies
View Related
Mar 24, 2010
ive been looking for a program to edit a .dat file for my r4 card thats used on my nintendo ds does anyone know anythign that
View 1 Replies
View Related
