OpenSUSE :: Octave: Dmperm: Not Available
Mar 24, 2011
To anyone who got octave: The issue: whenever I call the function "dmperm", it gives me the following
Code:
error: dmperm: not available in this version of Octave
Typing dmperm(3) gives that. However, dmperm alone gives some instructions on how to use this. So it is seemingly there.
Getting the same thing? What I got is octave 3.4.0, on openSUSE 11.4 x86-64. I tried with the one in repos contrib, the one in packman, and the one in contrib:Factory. Same outcome. It could be that there is some missing dependencies that were not specified by the packager, perhaps. This older post Octave - General - dmperm mentioned some packages. Things I did not have I got installed: libumfpack5 umfpack-devel bison flex I could not install "umfpack" as such. It is a source package. It still does not work..........
View 1 Replies
ADVERTISEMENT
Nov 10, 2009
I installed octave in my OpenSUSE 11.2 KDE system from Yast. When I launch it with the command "octave" on my shell, this is the message I receive: "octave: error while loading shared libraries: liboctave.so: cannot open shared object file: No such file or directory". What's the problem? Is it a known problem to be solved in the 11.2 RC2 or I have to do something else?
View 9 Replies
View Related
Feb 23, 2010
I'm trying to download ocatve, and on the gnu.org website there are two file packages available. There is a "tar.gz" and a "tar.bz2". Are these two packages different versions of the same thing? Or are both of these packages necessary? And...if there is a difference, which package would be more suitable for Hardy 8.04?
View 2 Replies
View Related
Nov 19, 2015
I am trying to install octave 4 in my debian wheezy, and I am getting following error after I have executed ./configure
checking for sgemm_ in -lmkl... (cached) no
checking for sgemm_ in -framework vecLib... no
checking for sgemm_ in -lcxml... (cached) no
checking for sgemm_ in -ldxml... (cached) no
checking for sgemm_ in -lscs... (cached) no
checking for sgemm_ in -lcomplib.sgimath... (cached) no
checking for sgemm_ in -lblas... (cached) no
checking for sgemm_ in -lblas... (cached) no
configure: error: A BLAS library was detected but found incompatible with your Fortran 77 compiler settings.
I have tried to find a solution about issues installing octave 4 from binaries. I can not use octave from the repository as it is old for my studies.
View 1 Replies
View Related
Sep 2, 2011
Any one use octave while taking a matlab class? I am currently in MATLAB but cant offord the software and there are no trials of it. The studernt edition is still expensive and i need to save money. I have been going in during math class to do matlab homework but i cant keep skipping math since i am a mechanical engineer.
View 14 Replies
View Related
Jan 12, 2010
Has anybody used both of these programs? How do they compare? Is Octave a good substitute for Matlab? How similar are the programing languages?
View 4 Replies
View Related
Jun 25, 2010
I am trying to compile octave-3.2.4 with centos 5.5 and I get the following error
[code]...
I have looked and I can not find any solutions.
View 2 Replies
View Related
Oct 22, 2010
I have recently installed Octave on my desktop and I am very busy with RTFM ATM.However, this manual is huge and I could not find an answer to my problem. What I basically want to do is initialize a vector like
Code:
a=[]
for i 1:100
a = [ a i ]
endfor
Now my problem is that this will call the pager and I have to hit 'q' to get my prompt back. I know I can turn it off but the screen will still get cluttered with tons of output.Is there a way to initialize 'a' quietly without any screen output?
View 2 Replies
View Related
Jan 29, 2011
I have a .txt file with the format
0.01
0.04
0.07
...
0.83
I am wanting to load this into octave and perform operations on the data.
[Code]...
View 2 Replies
View Related
Feb 18, 2011
can anyone explain me step by step process of installing octave on ubuntu 10.04?
View 1 Replies
View Related
Oct 4, 2010
Can anyone suggest a good free Virtualization Software Package that work on OpenSuse with the KDE Desktop, as I need to use Windows for some applications that have not got a Linux equivelant, Namely Reserch In Motions BlackBerry Desktop Manager and the drivers for my Printer and Scanner, so I would also need something with USB pass through. Or if there isn't any free virtualization software that will dowat I want that's free then something that is not expensive that's paid for. I like the look of Parallels Desktop 4 for Windows & Linux but I'm not sure if I would be able to justify paying �54.99 for the ammount of use that it will get?
View 9 Replies
View Related
Jan 9, 2010
I am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies
View Related
Aug 9, 2010
I installed the latest version...Everything works like a charm. I have Windows Home Server 2003 running and would like to access all of my folders. How can i setup OPENSUSE to find/access my Windows Home Server 2003. Can you help me with this. Just to let you know. Am i missing something so i can access them locally.
View 1 Replies
View Related
Dec 1, 2010
The rsync module "opensuse-full" which worked well so far seems currently broken. It tries to mirror a huge number of additional stuff (factory?) but fails with "permission denied". Any place where I could report this?Command:
Code:
rsync -rlpt -hi -stats rsync.opensuse.org::opensuse-full /drive/repo
Errors:
[code]....
View 5 Replies
View Related
Apr 20, 2011
This is an example of the error I receive when trying to do an update via YaST, YaST2, or zypper. Basically, curl is broken. With out it functioning normally, I can't use openSUSE's update mechanism to fix my system. Need to find a way to manually fix / upgrade curl.There was an error in the repository initialization.'Updates-for-openSUSE-11.4-11.4-0': [|] Valid metadata not found at specified URL(s)History:
- Unknown error reading from 'http://download.opensuse.org/update/11.4/'
- SKIP request: User-requested skipping of a file
- Download (curl) error for
[code]...
View 8 Replies
View Related
Jul 4, 2011
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
View 3 Replies
View Related
Jun 22, 2011
I recently installed opensuse 11.4 on a remote server. It has GNOME installed as a desktop. The problem I am experiencing is that when logged in through VNC, most of the GUI apps are not functioning, especially ones that require root privs. Example: The Add/Create users context does not function. After you supply root pw, nothing happens. If you launch it from a terminal, you see this:
jjmuw@g01:~> xdg-su -c /sbin/yast2 users
Xlib: extension "RANDR" missing on display "::1:1.0".
No protocol specified
No protocol specified
[code]....
(y2base:4872): Gtk-WARNING **: cannot open display: ::1:1.0
Followed by a hang. This is also affecting things like the Xen configuration contexts (creating/managing VMs).
View 5 Replies
View Related
Jul 9, 2011
Is there some blog, changelog, or place where i can track what issues get fixed in the opensuse gnome 3 implementation, or what features are bein added, what changes are bein made, etc.?For example, if there is some bug in opensuse with gnome 3, where can i read that it has been fixed in the dd/mm update, or that new feature xxxyyy was added in dd/mm update, etc.Im talking about issues, fixes, updates related to gnome 3 with opensuse. Not just opensuse with 2xgnome or kde.
View 1 Replies
View Related
Jan 10, 2009
I am having some problems getting the onboard sound card on my Intel DP45SG motherboard to work properly under openSuse 11.1. Yast appears to have detected the card as a 82801JI (ICH10 Family) HD Audio Controller, but I cannot get any sound out of the card at all.
I have tried to follow this thread, and have run the alsa-info script, the results of which are posted here. It appears to me that the codec that is listed in the alsa script, which is the IDT 92HD73E1X5, is not the same as that which is listed on Intel's site for this board, which is the IDT 92HD73E codec. Can anyone help me out with regards to getting this going? Additional info below:
[Code]...
View 9 Replies
View Related
Aug 6, 2010
after random chashes of openSUSE 11.3 x86_64 on my Acer Aspire 5720z I found a lot of messsages on the log
Code:
mcelog: failed to prefill DIMM database from DMI data
dmidecode seem ok for me
Code:
sharwyn:/var/log # dmidecode
# dmidecode 2.10
SMBIOS 2.4 present.
[Code]...
View 1 Replies
View Related
Aug 30, 2010
I'm experiencing random lockups. There are 2 types.1st time this happened when I enabled Kwin compositing effects. The screen turned black and it froze, the mouse pointer froze. Nothing would move. 5 Minutes later I just hard reset the Laptop. I was afraid something could be corrupted as it was shutdown in a bad way. On boot up Kwin's compositing effects were in place.Randomly working on the laptop, everything will freeze except the mouse pointer. This happens like once in a while though.I have a feeling this has something to do with my Dell Studio 1555 Intel GM4500 MHD graphics.
View 5 Replies
View Related
Nov 8, 2010
Would a Nvidia Geforce 4 graphics card be supported for openSUSE? My friend gave me it, and said that it was. But he doesnt use Linux.
View 4 Replies
View Related
Jan 11, 2011
I have 2 pc with Asus AMD boards (M4A87TD Evo and M4A88TD-M Evo) running OpenSuse 11.3.on both the front panel audio headset + mic do not work.on one PC I have an other OS also installed, so I know that on this machine the hardware is working.is there a chance to get the frontpanel audio connectors running with the actual openSuse or do I have to wait for the next version with a newer kernel/alsa version?
View 6 Replies
View Related
Jun 10, 2010
I successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
Here's my partition table map:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
View 1 Replies
View Related
Jun 14, 2010
I want to dual boot openSUSE 11.2 and Windows 7. I already have Windows 7 installed but I have encountered multiple issues in the past with trying to make dual boots. Usually when I install Linux, GRUB decides it wants to go into world domination mode, and "breaks" my Windows installation. I have reason to believe this is because the distros I use come with legacy GRUB, (v0.97) and for some odd reason it lacks commands such as "update-grub" etc. This means I cannot add Windows 7 to the boot menu without going into extreme complications, which have NEVER, I repeat NEVER succeeded. When I boot the Windows drive directly, I get some error about GRUB not finding the device, and it puts me into a grub rescue command line. Now I am no expert in this field at all, but wouldn't that mean that GRUB wrote itself to the MBR of...oh I don't know, ALL of my hard drives? I really want to install openSUSE 11.2, but from bad experience I am really put off as I know that it ships with legacy GRUB v0.97.I am also running Fedora 13 at the moment, I have quite an experimental dual boot running..been trying to get GRUB 2 for hours now, it is definitely there but no commands work, "upgrade-grub-from-legacy" and "update-grub" return with command not found. I've heard this is just a bug but can anybody confirm that there will definitely be a way for me to "fix" my windows installation after it gets "broken" by GRUB?Second idea, unplug my windows hard drive while openSUSE installs?
View 9 Replies
View Related
Sep 5, 2010
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
View 7 Replies
View Related
Mar 20, 2011
right now, my machine runs ubuntu 10.10 due to work issue, i need to use windows server 2008 R2 (its a windows exclusive company) but i never used any of the active directory or anything from the windows server (only experience with windows is visual studio and those GAMES!), so i figure i need to practice a bit on my own b4 starting the job and just at the same time I found out as a univ student i get it for free! And plus, I am finding opensuse a better option for me than ubuntu So im wondering what i should do regarding these 2 systems here s some option
1). Install openSuse 11.4, and install VirtualBox and use windows server 2008 R2 on vbox
2). Install windows server 2008 R2 and then install openSuse alongside with it
3). Install windows server 2008 R2 and install openSuse in virtualBox
I have been using linux as my primary OS for more than a year now and I rlly need it for both school and my own entertainment. So wondering which option would best work out for me
wat are your opinions? PS: my machine is about 2 years ago a Dell laptop, with core 2 duo p8700 (2.53ghz) 4GB ram, and nvidia gfx, which even tho is still fast, but isnt rlly that snappy when it comes to virtualization even running xp in a virtual machine is quite laggy at times :S
View 7 Replies
View Related
Jul 18, 2011
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
View 9 Replies
View Related
Aug 31, 2011
I've recently added a new hard disk and due to mother board controllers this new hard disk is known as sda.Before that my boot partition was /dev/sda3 and know this changed to sdb3.Whenever grub menu appears and I choose opensuse,it can't find /dev/sda3 .It seems that I should edit menu.lst or change boot loader parameter.something like root (hd1,2).But I don't how I can do this with opensuse boot loader.Though I could do this with CentOS easily.
View 7 Replies
View Related
Mar 23, 2011
I'm trying to diagnose a weird problem ... maybe someone has an idea where to start. I'm having a problem with flash videos. The video part displays as if the fast-forward button is being held down; audio sounds correct.
I'm thinking "synchronization error" (duh!) but I'm not sure how to start to diagnose the issue. I'm running OpenSUSE 11.4 x64, and the problem shows up in both chrome and opera.
View 3 Replies
View Related
