OpenSUSE :: Nvidia Settings Hangs - Whole Desktop To Freeze For About 5-10 Seconds
Oct 28, 2010
Sometimes, running "nvidia-settings" will cause the whole desktop to freeze for about 5-10 seconds, spike the Xorg CPU usage up to 100%, until the settings appear where everything goes back to normal.
Running "nvidia-settings" from a terminal does not show any output and restarting X does not help. Any ideas how to figure out what is happening, any places to look for log files?
I am using an up-to-date openSUSE 11.3 (64-bit), KDE 4.5.2, an NVIDIA GeForce 9800GT and the proprietary NVIDIA driver 260.19.12, which I installed manually following the instructions from
SDB:NVIDIA the hard way - openSUSE
View 8 Replies
ADVERTISEMENT
Mar 11, 2010
I have read and read and googled for my specific problem and nothing exactly matches. I have a Nvidia 8400GS, running SuSe 11.1, kernel 2.6.27.45-0.1.1,, Nvidia Drivers 193.5, KDE 3.??. It seems like about every third or fourth time I boot up I have to rebuild and install the Nvidia drivers (the hard way). When I get up and running again, use the Nvidia Control panel and save the settings to Nvidiaxxxxxxx.RC file. Why does this keep happening, any suggestions or threads that might answer this problem?? Also I can't get my wallpapers to fill the desktop, they are tiled sometimes and I can't change them. One other thing is I am having trouble with the screensavers, they won't start, and I like to delete some of them?
View 2 Replies
View Related
Mar 19, 2010
Sometimes when I type something to run apps on krunner (alt + f2) it gets freeze for about 10 seconds. I say sometimes but sure it happens most of times I use krunner. Other times I write it on but then the app doesn't come up until about 10 seconds...Does someone else have this issue on krunner? KDE 4.4.1, openSUSE 11.2.
View 9 Replies
View Related
Mar 31, 2011
I have openSUSE 11.4 KDE 64 bit. openSUSE is really great, but I hate the freeze when I startup my computer. Desktop appears but I cannot do anything. This takes approximately 20 to 30 seconds and than my plasmoid-networkmanager shows network is up. As from this moment freeze is over.
I already tried to switch off ipv6 and put nomodeset in grub, though this is not helping. Does anyone have any idea what this is and how I can solve this?
View 3 Replies
View Related
Aug 8, 2010
The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
View 6 Replies
View Related
Dec 25, 2009
configuration: $uname -a
Linux perosoft.home.org 2.6.31.6-166.fc12.i686.PAE #1 SMP Wed Dec 9 11:00:30 EST 2009 i686 i686 i386 GNU/Linux
$/sbin/lspci -nn | grep 'VGA|NV'
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8400 GS [10de:0422] (rev a1)
$rpm -qa|grep kmod
kmod-nvidia-2.6.31.6-166.fc12.i686.PAE-190.42-1.fc12.8.i686
kmod-nvidia-PAE-190.42-1.fc12.8.i686
i have created a shortcut for konsole on desktop, if i click on icon all desktop is freezing for 10-15 seconds before konsole is launched. if i have the same aplication overlapped in taskbar and i click once same thing is happening, desktop is freezing before select menu is appear.
View 7 Replies
View Related
Nov 23, 2010
I had a problem where my system momentarily hanged for a few seconds. Sometimes when opened a window like Dolphin or when I made a window full screen, sometimes when clicking on the screen while watching a DVD or sometimes when I clicked on a button it just froze for a few seconds and responded.
I have fixed the problem by disabling "Processor Power Managament" in the Bios.
this happenend on my desktop computer. See specs in my signature
View 2 Replies
View Related
Jul 20, 2010
I upgraded from 11.2 to 11.3 and found that there was no 3d support with the "nouveau" driver for the nvidia card. Then I linked in the nvidia repo and installed the nvidia driver. After that I noticed I had 3d support but things were a bit choppy, regardless of compositing or other tasks running. It appears that every 10 seconds the CPU load shoots up (on all 4 cores) and during about half a second all other activity is postponed, including mouse clicks, window moves, animations etc. Using the system monitor watching the CPU load, I see a train of load peaks traveling from right to left, 10 second intervals. Also done a graph on "paged in pages", same pattern, peaks on 6500/s. 11.2 Never exhibited this kind of behavior. Since I haven't found any similar postings I thought that some leftover of 11.2 may be the cause of this and since I am not an expert I would welcome any suggestions on how to tackle this.ystem: quad core Q6600, 3Gb mem, GEforce 8600GT, etcFwiw the load peaks are doubled, meaning peaks at 0, 3, 10, 13, 20, 23 etc seconds
View 9 Replies
View Related
Jun 20, 2011
I'm experiencing some weird short freezing issues in Squeeze and / or unstable. Everything works as usual, then the system will freeze for some seconds if I don't do anything, or resume faster if I move the mouse or hit a key on the keyboard. I thought it was a wifi related problem, as I have an intel iwl4965 , here is what I often see in dmesg:
[ 2608.910307] iwl4965 0000:06:00.0: Queue 4 stuck for 2000 ms.
[ 2608.910317] iwl4965 0000:06:00.0: On demand firmware reload
[ 2608.912832] ieee80211 phy0: Hardware restart was requested
View 8 Replies
View Related
Jun 6, 2010
I installed Gnome desktop environment recently then ;I' ve lost KDE desktop effects settings. I just can see Compiz Configirator. I cant configure effects independently. There is same settings in gnome and kde. And also I cant change windows appearence.
View 4 Replies
View Related
May 17, 2010
[I'm not sure if this is the right forum. This is the closest I've found]. I've installed Ubuntu 10.04 LTS (dual boot with Windows XP SP3). After Ubuntu starts, it takes about 10 seconds, and the computer halts. No screen/mouse/keyboard activity. If I start Ubuntu under Recovery Mode, with failsafeX, it doesn't happen.
In the Windows all is fine. What did I wrong? [My CPU is: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz, if it matters...]
View 9 Replies
View Related
Jun 4, 2010
I have a Ubuntu 10.04 fresh installation on my HP laptop. Installation successful and boot OK. But the desktop randomly freeze. During freeze(about 15s each time), all programs are not responsive. Sometimes I can switch program by click, but program seems locked. How can I know which module cause the freeze?
View 4 Replies
View Related
Feb 23, 2010
I did an install of Opensuse 11.2 yesterday from the Gnome live-cd. Everything went fine, live-cd worked perfect, but after install It would load just the desktop wallpaper and my mouse cursor seemed to freeze. No panels, Icons or anything.
View 3 Replies
View Related
Aug 4, 2011
I'm trying to play with different control style at application settings-controlstyle, after change a little bit of settings, the desktop freeze nothing can click,so I goto control+alt+f2,hit control+alt +delete, after restart, It freeze again, so where it store the settings about that so I can change it to default control style from terminal only acess since dekstop freeze all the time?
View 2 Replies
View Related
Dec 5, 2010
On a fresh install 11.3 gnome I am getting an update freeze on the kernel-desktop-2.6.34.7-0.5.1. This is on the initial software update after first log in on fresh system. It downloads the package and freezes during the update and causes all my other updates to reload. I went to init 3 and ran zypper update and saw that it made it to 91% and then stopped. After that I usually get a corrupted install.
View 9 Replies
View Related
Jul 19, 2010
I am extremely disappointed in this 11.3 release. openSUSE had a system that worked. I never had a major problem with the Nvidea video drivers before this release. When I did have a problem with the drivers (usually because Nvidia screwed up) I was able to easily use "The hard way" to install the drivers and all was good. But now the system is so screwed up that the drivers wont install. I can't find a working Saxx2 anywhere. nvidia-settings won't install from rpm. What the hell is going on? This release should have been held up until this garbage was fixed. Novvaeu (sp?) won't work for some of the programs I want to run.
I probably changed so much stuff that I bet my system won't boot now. Oh and what happened to the lack of repair software on the install disk? For two versions now the only repair option we have had is the command line. That's great if you use those tools on a regular or semi regular basis.
View 5 Replies
View Related
Mar 20, 2010
I've a laptop with 2 external monitors connected to it.Using SaX2 I can't configure it in a way where it only uses the two external monitors and not the laptops own screen.With nvidia-settings I can configure it properly, as I am however unable to save it due to a missing xorg.conf file how am I supposed to save the this config so it isn't 'forgotten' between reboots?
View 2 Replies
View Related
Sep 4, 2010
I'm having the following problem with SUSE 11.3 and my Nvidia Geoforce 7300 GT. I have the driver installed but am unable to change the resolution in the Nvidia configuration X-Server. It seems it is limited to the following 640x480 and 320x200. fix this as it looks awful and I know that I should have greater resolutions.
Please find my xorg.conf listed below
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder97.nvidia.com) Fri Aug 27 20:55:22 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
[Code]...
View 9 Replies
View Related
Jun 17, 2010
I am looking to speed up my boot time; it is currently around the 2-2.5 minute mark from Grub to desktop (including about 15 seconds at the login screen while I type my password).
I have forced ureadahead to reprofile, and have rebooted a few times until the boot time is fairly stable/consistent.
No xorg errors and only one warning ((WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.)
However, dmesg reports the following:
Code:
...
[ 1.121369] Freeing unused kernel memory: 656k freed
[ 1.121926] Write protecting the kernel text: 4676k
[ 1.121977] Write protecting the kernel read-only data: 1840k
[ 1.146159] udev: starting version 151
[Code].....
View 9 Replies
View Related
Oct 6, 2010
After installation of 11.3 I had intermittent hangs and blurred icons.
"My Computer" told me I had a Nvidia GeForce 9100 and a driver called "gallium". That was the problem.
I added "ftp://download.nvidia.com/opensuse/11.3" to my repository and found a new driver to install. That solved my problems. Now my systems are rock solid.
View 9 Replies
View Related
May 1, 2010
Just installed Lucid Lynx on my Desktop and after logging in I would get a 15-20 second pause before Gnome appeared. I found many many potential solutions for this problem on the Internet but none solved it. Finally figured out that it was due to the system seeing a floppy controller when I have no floppy drive. I was led to this conclusion by the following two lines in my syslog (System > Administration > Log FIle Viewer > Syslog).
May 1 18:27:04 Desk-Ubuntu kernel: [ 34.636665] end_request: I/O error, dev fd0, sector 0
May 1 18:27:16 Desk-Ubuntu kernel: [ 46.813441] end_request: I/O error, dev fd0, sector 0
Note the 12 second delay when it tries to read again.
So if you are getting the pause and seeing the same thing your system log then ...
Enter your BIOS and disable the floppy drive Use sudo and edit /etc/fstab commenting out the line with fd0 in it
Hope I can save someone else the headache of hunting through the Interwebs and finding 5 different solutions none of which worked. Learning as I go with Ubuntu so I didn't even know how to carry out most of the "solutions" which required more googling. I am migrating from FreeBSD due to application requirements
View 2 Replies
View Related
Jan 20, 2011
I created a ubuntu distro that originated from ubuntu server and have an xserver installed with openbox and am having problems getting autologin working. I had slim installed and everything seemed to be working except as soon as the monitor went into sleep mode and I moved the mouse to get it back it just came up to the shell again. With that problem I decided to remove slim and go with NODM and that worked perfectly for what I wanted but I was messing around with a few other configuration stuff and when I rebooted everything was fine until after the splash when it would normally boot into X it would show the shell for a about 10 seconds before it would boot to X.
View 2 Replies
View Related
May 20, 2010
I have Centos 5 Installation with following Linux ipmpls.mobilink.net.pk 2.6.18-8.el5xen #1 SMP Fri Jan 26 14:42:21 EST 2007 i686 i686 i386 GNU/Linux. I have Nagios running on it for monitoring switches. It also runs postfix to give email alerts in case of a switch is unreachable. The problem is that the server hangs for a minute and returns to normal operation. During this period if a switch is polled it cannot be reached and hence Nagios shows the Flapping state on the switches. I need to understand as to why the server hangs
View 1 Replies
View Related
Aug 21, 2010
I am using Fedora 13 x86_64 on a Acer Aspire 7730ZG laptop with: 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) I have kmod-nvidia-2.6.33.6-147.2.4.fc13.x86_64-195.36.31-1.fc13.2.x86_64 installed from rpmfuison when I plug in the hdmi cable to the tv, my tv says the resoultion is at 720p, and I can not get any of the resolutions settings to look right on seperate x screen with the nvidia X server settings gui. my tv is a vizo 42inch. also another question is their a way to set the video card to output at 1080? this might be part of my problem?
View 14 Replies
View Related
Mar 9, 2010
I installed the nvidia proprietary drivers with click-install and everything perfect, I have desktop effects working but the problem is that when you open the config. screen settings to make sure everything was really good, I get to screen unknown April.
The maximum resolution is the correct 1440 * 900 for 19 "but the refresh rate by not recognizing the monitor down to 50hz me and gives me the option to 60hz as it was before installing the nvidia drivers.
How can I fix the display settings?
View 6 Replies
View Related
Aug 6, 2011
At boot time, my computer hangs for 15 seconds before continuing. This is the message that I receive:Starting the hotplug events dispatcher: udevderror binding udev control socket 1...(warning).Waiting 15 seconds and trying to continue anyway...(warning).
View 1 Replies
View Related
Aug 12, 2010
I'm having a few problems with flash objects in Firefox. When I load a page with flash - ..... for example - the flash object is just a grey box and firefox hangs for 30 seconds or so. When firefox finally responds again all that's left of the flash object is a black box. Does anybody know what the problem is? And even better - what I can do to fix it!
For background info - flash was working fine in F12 before I updated to F13. Used the install DVD for F13 to perform the update. I'm running F13 64bit with KDE, Firefox is showing Shockwave Flash in the addons list. Originally installed the flash plugin using the instructions from mjm wired:
Code:
[mirandam@charon Download]$ sudo yum install nspluginwrapper.{i686,x86_64} alsa-plugins-pulseaudio.i686
[mirandam@charon Download]$ sudo yum install flash-plugin I've tried removing those packages and reinstalling but no luck.
View 14 Replies
View Related
Jul 24, 2010
I try to play some music with my PlugComputer and I use an USB audio key. I have succefully installed linux-sound-base, alsa and mpg123. When I run mpg123 the sound loud during 5 seconds and stop. After the device is locked and nothing can be played without rebooting.
[Code]...
View 3 Replies
View Related
Sep 17, 2010
i have been using opensuse 11.3 for 3 weeks now, last night i tried installing Ati drivers and i did a google search and i got this ati.ymp file from http://opensuse-community.org..after installing that, i got a frozen screen but the cursor moves and behind i can see a dim image of a bug reporting window, but I cant do anything except move the cursor around. i did a restart and now when i leave my PC and come back after like hr hr or so the same thing happens.
View 9 Replies
View Related
Mar 28, 2011
I have an old averatec machine (3200 series) Slackware 12.2 is working fine out of the box (13.1 is not even booting after installing, so i decided not to work in this direction) except for the wireless. the wireless is working some seconds after putting the interface up, later stops working, and if you mess around a little with the interface, the computer will hang (caps and num lock will flash and thats all) I tried diffferents kdrivers (right now i downloaded the latest linuxwireless and im using those drivers) same situation. was working fine with kernel 2.24 and old drivers (the iface wass called ra0, right now is wlan0) I know this is not much information, but i will try to get another pc to make a ssh and beeing able to get some traces.
View 5 Replies
View Related
