OpenSUSE Hardware :: Unknown Monitor After Installing Nvidia Drivers / Fix Display Settings?
Mar 9, 2010
I installed the nvidia proprietary drivers with click-install and everything perfect, I have desktop effects working but the problem is that when you open the config. screen settings to make sure everything was really good, I get to screen unknown April.
The maximum resolution is the correct 1440 * 900 for 19 "but the refresh rate by not recognizing the monitor down to 50hz me and gives me the option to 60hz as it was before installing the nvidia drivers.
How can I fix the display settings?
View 6 Replies
ADVERTISEMENT
Feb 16, 2010
I've just installed OpenSUSE 11.2 on a new machine. Because I was still using another machine as my main box while building the new one, the monitor attached when it was installed has a resolution of 1280x1024 @ 77Hz. I've now moved it to be my main machine and the monitor is a widescreen 1680x1050 @ 60Hz model. When I boot it normally the screen fails to come up - even GDM doesn't show. If I boot in failsafe mode the system comes up fine, but in 1280x1024 mode. The 'Configure display settings' icon shows the monitor as 'Unknown'. Couple of things I tried:
1) Switched to runlevel 2 and logged in as root. Ran Xorg -configure and looked at the xorg.conf.new that was installed, but it just had generic info for the monitor:
[code]....
2) While still in runlevel 2 and logged in as root I did a startx. This brought up the X display in 1680x1050 ok, and clicking on the 'Configure display settings' icon showed it had correctly identified my monitor and had set the size and frequency correctly.
3) Given the results of (2), I then tried logging in as myself in runlevel 2, did startx again, but this time the display failed to come up again.
View 7 Replies
View Related
Nov 19, 2009
I have never used Linux always windows so heres the problem the display only has 2 settings 640x480 and a smaller one and it say unknown monitor. I installed the drivers in hardware driver in systems I'm running Ubuntu v 9.10 if that matters and the video card is a Nvida mx440.
View 1 Replies
View Related
Feb 28, 2011
I just installed Ubuntu last night parallel to windows vista ultimate (no problems). My biggest problem is that when I tried to install the nvidia display drivers, I somehow downloaded a server based driver (and am having amazingly difficult problems). I use a dual monitor set up (both are plug and play LCD displays) and i'm not too worried about aesthetics but rather, performance. I downloaded the correct driver but now I don't know how to install it. Is there a way to uninstall this server driver?
View 1 Replies
View Related
Jan 11, 2010
I have a Compaq Presario CQ60 laptop with an Nvidia 8200M graphics card. When I try to enable visual effects I am asked to install the Nvidia restricted driver. When I do this and reboot, I get 6 copies of the Ubuntu screen on my display. Does anyone know what is causing this? I'm not sure which version it installed, I assume either 173 or 185. I have downloaded version 190 from the Nvidia web site. Should I install that version? If so, it is a .run file, how do I install it?Also, how do I reinstall the old driver. I fixed the problem this time by reinstalling Ubuntu, but that will get old if I have to do it too often.
View 4 Replies
View Related
Oct 16, 2009
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
View 5 Replies
View Related
Mar 8, 2011
I'd like to solve a little problem that I have connecting my notebook with an external VGA monitor.Everything seems to work fine, but when I close the laptop monitor, also the external monitor shuts down.I've tried to find different energy-saving setting for laptop display and external monitor. with no luck...My video card is an ATI Radeon Xpress 200M. On the ATI website there is no catalist control center for linux. (It would be very useful). So, for now, I can only use the display options on the panel.
View 4 Replies
View Related
Jul 24, 2011
I have installed openSUSE with Gnome3.
I had to install the nVidia proprietary drives so the OS would boot into Gnome3 and not fail safe mode. Without the proprietary drivers installed the display settings said:
Driver: software rasterizer in use
After installing the nVidia drivers Gnome3 works in one monitor, but I would like to be able to use my other two monitors (totaling three with two video cards.)
When I run nvidia-settings to generate an xorg.conf file it hangs, so I used nvidia-xorgconf to generate the xorg file and then used nvidia-settings to configure my extra screens.
This fails with a permissions error, running sudo nvidia-settings fails with the following error:
ERROR:
So, I ran nvidia-settings, saved the settings file to my /home/$USER dir, then copied xorg.conf to /etc/X11/
Logging out and logging back into Gnome fails with the error:
This problem extends to Ubuntu running Gnome3, so my thinking is:
a) Imma id10t and something in my xorg.conf file is wrong,
b) there is an issue with Gnome3/nVidia/Multiple displays.
I would really like to use Gnome3, it works on multiple other machines (ironically all ATI devices) just not the machine I use all day long...
Here is my xorg.conf file as generated by nvidia-settings.
Code:
View 6 Replies
View Related
May 31, 2010
I am new to opensuse and have installed 11.2 KDE. It is simply perfect for my system. However after the initial setup the display resolution was set perfectly fine for my 18.5" LED monitor, default resolution was 1366x768, and everything looked good from desktop to fonts but the OSS drivers didn't support compositing so I decided to switch to nvidia drivers. I installed the driver as shown in openSUSE repositories page, for my 6600GT card. Now after rebooting everything is stretched,even the fonts look really ugly and fuzzy.
I am unable to find any mode in Nvidia XServer settings that would correct the current ugly stretched display. I am unable to set 1366x768 manually as well, doing so my PC won't boot to KDM but rather sticks to console. Now it's for sure that my monitor and display card supports 1366x768 resolution but it's just that nvidia drivers/Nvidia XServer settings won't let me set that resolution. How can I set the resolution or even better if I can enable compositing using OSS drivers then that would be great an dm willing to switch back.
View 9 Replies
View Related
Jun 29, 2010
Currently I have two 1920x1080 screens running in Twinview on my Geforce 275 graphics card. Want I want to do is a quick simple way of disabling my secondary monitor when playing video games or using xbmc to watch movies, etc. I've tried a few applets but they require the xandr function which I think Nvidia doesn't support.
Is there a way to disable this quickly other than loading up nvidia-settings and disabling the monitor everytime. I don't really want to use two seperate x sessions and xinerama due to the fact you can't use compositing.
View 1 Replies
View Related
Mar 15, 2010
I installed OpenSuse Gnome version 64 bit on a HP laptop DV7 Intel Dual Core with nVidia 9600 GM cardAll went well, until after I had installed the nVidia drivers from this page: NVIDIA drivers - openSUSEI selected the Geforce 1-click install and Yast went on to installl all the packages (a lot of 32-bit),took about half an hour.I logged out/in, and could work as normal, until I rebooted. Maybe I waited not long enough (5 minutes), but the screen was blank, then I gave up.Anyone has an explanation. I can always re-install everything, but then what went wrong with the nVidia package
View 9 Replies
View Related
Mar 20, 2011
What i have done so far, after all that i still get a black screen after rebooting, so im runing on x11 failsafe.
1) Installed development tools and sources needed for nvidia kernel module build.
Checked what type of kernel i have and installed all the components below with all the dependencies they pull in.
2) Added nomodeset into /boot/grub/menu.lst
3) Set NO_KMS_IN_INITRD to Yes in /etc/sysconfig/kernel
4) Added blacklist nouveau to /etc/modprobe.d/50-blacklist.conf
5) Rebuild initrd and rebooted
6) After reboot switched to run level 3, login as root (or as user and su to root)
7) Install the NVIDIA driver, run nvidia-xconfig (the -X option) and reboot
View 9 Replies
View Related
May 1, 2011
I can install the nvidia driver for my card easily with yast but would like to try using nvidia's own installer. There is a paths problem. I've spent some time looking at 11.4 kernel build paths and they seem to be circular so the installer will not find what it needs. The installers help in this respect is as follows.
Code:
--kernel-source-path=KERNEL-SOURCE-PATH
The directory containing the kernel source files that should be used when compiling the NVIDIA kernel module. When not specified, the installer will use '/lib/modules/`uname -r`/build', if that directory exists. Otherwise, it will use '/usr/src/linux'. Obviously it will fail on the build directory and fall back to usr/............ where linux is a symbolic link linux -> linux-2.6.37.1-1.2
which must be the one in the same directory but it fails to find either type of auto conf file From this I assumed that it just needed pointing at the correct build directory but this turns out to be symbolic link
Build -> /usr/src/linux-2.6.37.1-1.2-obj/x86_64/desktop
However when pointed here it still doesn't find what it needs and falls over looking for the kernel header this time. I thought that the idea of the /usr/src/linux link was to standardise kernel building but if suse use it for something else or nvidia make the wrong assumptions just where should the installer be pointed?
View 9 Replies
View Related
May 2, 2011
I am having a challenge to install drivers on this machine with the OS and graphics card stated in the subject. To date I have tried different ways and they are broken in the steps or in the results I get on my machine. The how-to written by ajohnw Installing an nvidia driver - easiest I have found to date. results in a file or directory not found when I try to execute
Code:
/etc/bin/nvidia-xconfig
The article SDB:NVIDIA the hard way results in the following error (copied from the error log):
Code:
ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist.The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured.
Researching how to resolve that error and I can't find anything relevant to openSUSE 11, closest version being openSUSE 9.Lastly, I've tried this SDB:NVIDIA drivers and for some reason it does not generate the xorg.conf file. At least that's what I am concluding. I go through the steps, reboot the system and boot only to a command prompt. Navigating to /etc/X11/ there is no xorg.conf and I have to copy xorg.conf.install to xorg.conf to get back into the Desktop.
View 9 Replies
View Related
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
Feb 13, 2011
This is my first time with openSuse as I have heard that openSuse is better forlaptops then ubuntu is. On this laptop, I had already installed ubuntu but decided I no longer liked ubuntu very much, but for no real reason. I encountered almost the exact same problem using both ubuntu and kubuntu, but I had more problems on top of the graphical problem - so I decided to give openSuse a try. I love it so far!Anyway, to the point - I have an Nvidia GeForce GT330M. I have tried installing the drivers the "easy way" and the "hard way" and I have even used the script lnvhw, all to no avail.
What seems to happen is that, after I install the drivers (from runlevel 3, of course), as soon as I restart my computer it initially loads just fine. However, after the loading bar shows up, I get dropped into a console login (tty1), and tty7 & 8 show absolutely nothing, except a blinking cursor.I have two graphic cards in my computer -- an Intel HD card. This is loaded normally and, from "My Computer" it is the graphics card in use, as far as I can tell. The other, as I said, is the nVidia GeForce GT 330M. I'm not much of a "power" user, so I'm not really sure where to start with finding the issue
View 9 Replies
View Related
Jul 13, 2011
Whenever I change my Display and Monitor settings. The settings keep getting reset every time I restart KDE. The changes work fine and as expected, they just keep getting wiped every time for some reason.Here is what the settings look like after each restart:And here is what I'm trying to modify them t
View 1 Replies
View Related
May 5, 2011
I'm trying to get my secondary display (DVI-Out) working on a laptop (built-in monitor & external display) and I'm afraid I made quite the mess of it installing the proprietary driver only to learn that my old ATI card is no longer supported and having to clean that up and reinstall the original distro driver!Anyways, I reverted back to the open source driver and all is ok. That is until I reboot. If I reboot with the DVI display connected then both displays are brought up in 640x480 res and look terrible.
What do I have to do to be able to leave my DVI display connected when I start up the machine and get it to render the way it does when I plug in the display after the machine is running?I suspect I need to create an xorg.conf file but these fancy modern Linuxes these days don't come with one (or maybe they no longer need it anymore).
View 2 Replies
View Related
May 14, 2009
I recently installed Kubuntu 9.04 + Nvidia driver 180.44 on my Dell Latitude E6400 (1440x900) with NVIDIA Quadro NVS 160M. I have the G2410 1920x1080 external monitor. The monitor is connected via VGA. I am very pleased to have the monitor running at full resolution. However, the settings don't stay intact after rebooting.
If I have the monitor connected and turn on the the laptop, only the laptop screen is active. Then, I press Fn + F8 twice to switch to the external monitor which is always reset to 1440x900. After logging in I open Nvidia settings and switch the external monitor resolution to auto. There is a warning about Meta modes and I do auto fix. Then compositing is disabled, so I open system settings, turn off then turn back on desktop effect. Also, if I want to switch back to the laptop display, it stays stuck at 1920x1080 on the laptop.
Is there any way to set this up so it is automatically detected when the external monitor is plugged in and runs at the correct resolution? With my old M1330 and Intel X3100 graphics card, it would do this and was very convenient switching back and forth between the laptop display and external monitor.
View 1 Replies
View Related
Jan 13, 2010
I want to be able to change the settings for my top down dual head display. Basically one monitor sits on top of another right now. How it was setup before was that they used to sit right next to each other so when you mouse over to the right it would go to the new screen. The problem is now when one sits on top of the other I want to be able to just mouse up instead of mousing over to the right. I don't want to use the gui to be able to do this. I want to find out what config file and specifically what setting in the config file would allow me to change this.
View 2 Replies
View Related
Sep 26, 2010
Recently I upgrade to the latest Nvidia driver for Linux. I checked that it was compatible with my Ubuntu 10.04 x64 system and my geforce gt 220 graphics card. I decided to go with the newest beta ver 260.1904. Installation went well, better actually than other times I tried to install the newest driver from their site. After installation was finished I restarted and let my system load up. As soon as it got past the ubuntu logo, the screen just went blank as if there was no signal.
I determined that everything but the display was working. When I pressed ctrl-alt-F1 the numlock light turned off (this usually happens) and was still toggle-able. When I went through the other x-servers (ctrl-alt-(F2-F6)) the light went out but could be turned off and on by hitting numlock. When booting in from recovery mode, the screen displayed up to the point where it would show recovery options with no noticeable error showing before the screen turned off. This is what worries me the most.I don't think it is my Xorg.conf because I replaced with a backup and still have the same problem.Does anyone have any ideas about why this is happening or how I can at least see the terminal. As a side note, its definitely not the card because the card worked fine before, works in windows and live cds, and I tried with an older nvidia card and had the same problem.
View 3 Replies
View Related
Feb 23, 2010
I have a Dell E6500 laptop (1280x800 screen), which I frequently dock.The dock as two Dell 1908FP 20" monitors connected by DVI. I can move between the laptop display and the twins by manually changing display configuration in NVIDIA X Server settings, but this is a pain requiring about 15 clicks each time.
I have tried using the "Save to X Configuration File" option in the Nvidia server settings, but this seems to screw everything up. I need to dynamically change between the setups... anyone have advice on getting that done?Can the xorg.conf file be configured to do it?My xorg.conf looks like this:
Section "Screen"
Identifier"Default Screen"
DefaultDepth24[code]......
View 5 Replies
View Related
Jun 7, 2010
I am trying to install nVidia drivers on CentOS 5.4 and it is requiring kernel-source
# lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
For the installation of kernel source, I have followed the steps on [URL]. I followed the steps under 2.1 and they worked for me. Now what can be done for the installation of the kernel-source package. When I am trying to install nVidia drivers, I am getting error, following are lines from installation log of Driver.
-> Tagging shared libraries with chcon -t textrel_shlib_t.
-> License accepted.
-> Installing NVIDIA driver version 185.18.31.
-> No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]? (Answer: Yes)
-> No matching precompiled kernel interface was found on the NVIDIA ftp site; this means that the installer will need to compile a kernel interface for your kernel.
-> Performing CC sanity check with CC="cc".
-> Performing CC version check with CC="cc".
ERROR: Unable to find the kernel source tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL]. I want to install driver.
# rpm -q kernel-
kernel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-devel
kernel-devel-2.6.18-92.el5
kernel-devel-2.6.18-164.15.1.el5.centos.plus
kernel-devel-2.6.18-194.3.1.el5
kernel-devel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-source
package kernel-source is not installed
The nVidia Driver I am installing is:
NVIDIA-Linux-x86-185.18.31-pkg1.run
# uname -a
Linux harvey 2.6.18-194.3.1.el5PAE #1 SMP Thu May 13 13:48:44 EDT 2010 i686 i686 i386 GNU/Linux
Only reason to install the proper driver is to use dual monitor.
View 6 Replies
View Related
Nov 21, 2010
This is my third SLackware install. I installed 10,12, now 13. the Xorgsetup has changed I think, it does not display the screen to choose Horizontal and Vertical settings for the monitor. In addition, how can I set the Refresh rate?
View 2 Replies
View Related
May 27, 2011
I have done a scratch install of Ubuntu 11.04 (Natty) successfully today. I am facing problem while adjusting my monitor resolution.
My motherboard is pretty old, Kobian 845GLNDSMx. When I tried to adjust the resolution from Preferences -> Monitors, the resolution is shown as 800x600 (4:3), Refresh Rate - 0Hz and Rotaion as normal. "Monitor Unknown" is highlighted on the window. Moreover, "Detect Monitors" doesn't work.
View 9 Replies
View Related
Jun 18, 2011
I am new to Ubuntu. I installed Ubuntu 8.04 and it detected my Acer monitor AL1716 correctly and it works fine. However when I installed Ubuntu 11.04 it shows the monitor as " Unknown Monitor" and the maximum resolution is 1024x768 and I cannot set the native resolution which is much higher. My motherboard has Intel 845G chipset and built in graphics. I tried Ubuntu Software Center, but couldnot solve the problem.
View 4 Replies
View Related
Mar 10, 2010
i have a viewsonic VA712b monitor that used to get 1280x1024 resolution on my dell optiplex gx260 that had the intel video card.i upgraded my motherboard cpu and memory..the nvidia 6100 that is onboard seems like it would be an improvement to my old onboard intel but the best resolution i can get is 1024x768
i installed the nvidia 185 drivers and it's not recognizing my monitor as a flat panel lcd but as a crt, also it won't set the correct refreshrate - either 60 or 75.. it's set at 50... since xorg 7.4 no longer uses a xorg.conf file.. i'm not sure how to go about manually adjusting the settings to ones that will actually work. i mean other than buying a separate graphics car (URL)
View 1 Replies
View Related
Oct 16, 2010
I've installed Ubuntu 10.10 on my Macbook Pro 5,5. Everything is running fine with some tweaks. Just one thing bothers me: when I tell Nvidia X Server Settings that I want to use my external screen as primary screen it doesn't put the gnome panels to the other screen, well... sometimes it does after a couple times but most of the time it doesn't.is there a way to automatically detect when I connect a monitor instead of going to the Nvidia settings? Just the way Mac OS X does?
View 1 Replies
View Related
May 21, 2010
I am posting this to hear if there are others with display issues on Dell E6500 laptop with the Nvidia Quadro NVS 160 driver. This problem is starting to annoy me a great deal, but I am uncertain how I should move forward. In short; I have Ubuntu 10.04 x64 installed on my Dell E6500 laptop. When using only the laptop, everything works great. The second I plug it into the docking station (the laptop lid closed) and want to use my two external monitors (Dell 2001FP) I'm in trouble. I cant see anything and what I get is a 'DVI: Cannot Display this Mode' on the primary monitor - If i try a regular VGA cable I get nothing but a black screen.
I have played around with the Nvidia config but it cant find my monitors and therefore I cant do much. I am aware of the various "hack the xorg.conf" options, but I before I do that I wanted to see if others had experienced the same thing. I had hoped that we were pasted the hack stage and that primary functions such as display would work by now.
View 9 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
