Debian :: System Will Freeze For Some Seconds
Jun 20, 2011
I'm experiencing some weird short freezing issues in Squeeze and / or unstable. Everything works as usual, then the system will freeze for some seconds if I don't do anything, or resume faster if I move the mouse or hit a key on the keyboard. I thought it was a wifi related problem, as I have an intel iwl4965 , here is what I often see in dmesg:
[ 2608.910307] iwl4965 0000:06:00.0: Queue 4 stuck for 2000 ms.
[ 2608.910317] iwl4965 0000:06:00.0: On demand firmware reload
[ 2608.912832] ieee80211 phy0: Hardware restart was requested
View 8 Replies
ADVERTISEMENT
May 17, 2010
[I'm not sure if this is the right forum. This is the closest I've found]. I've installed Ubuntu 10.04 LTS (dual boot with Windows XP SP3). After Ubuntu starts, it takes about 10 seconds, and the computer halts. No screen/mouse/keyboard activity. If I start Ubuntu under Recovery Mode, with failsafeX, it doesn't happen.
In the Windows all is fine. What did I wrong? [My CPU is: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz, if it matters...]
View 9 Replies
View Related
Mar 19, 2010
Sometimes when I type something to run apps on krunner (alt + f2) it gets freeze for about 10 seconds. I say sometimes but sure it happens most of times I use krunner. Other times I write it on but then the app doesn't come up until about 10 seconds...Does someone else have this issue on krunner? KDE 4.4.1, openSUSE 11.2.
View 9 Replies
View Related
Oct 28, 2010
Sometimes, running "nvidia-settings" will cause the whole desktop to freeze for about 5-10 seconds, spike the Xorg CPU usage up to 100%, until the settings appear where everything goes back to normal.
Running "nvidia-settings" from a terminal does not show any output and restarting X does not help. Any ideas how to figure out what is happening, any places to look for log files?
I am using an up-to-date openSUSE 11.3 (64-bit), KDE 4.5.2, an NVIDIA GeForce 9800GT and the proprietary NVIDIA driver 260.19.12, which I installed manually following the instructions from
SDB:NVIDIA the hard way - openSUSE
View 8 Replies
View Related
Mar 31, 2011
I have openSUSE 11.4 KDE 64 bit. openSUSE is really great, but I hate the freeze when I startup my computer. Desktop appears but I cannot do anything. This takes approximately 20 to 30 seconds and than my plasmoid-networkmanager shows network is up. As from this moment freeze is over.
I already tried to switch off ipv6 and put nomodeset in grub, though this is not helping. Does anyone have any idea what this is and how I can solve this?
View 3 Replies
View Related
Sep 26, 2015
So i just finally installed Debian Jessie OS, replacing Ubuntu. But now it is running extremely slow. It's not internet connection. The internet speed is running fine (Videos load quickly), but it's like the system freezes every 30 seconds or so. A video can be fully loaded but still stops and starts constantly. Just browsing the internet, or non-internet things do the same also. I switched back to Ubuntu to see if it was different on there, but Ubuntu is running fine.
View 4 Replies
View Related
Apr 4, 2010
i'm running debian on a custom-built (no brand) box, which has been up and running for, maybe, 3-4 years with no issues whatsoever. all good parts... asus mbo, athlon, wd hd, etc. lately, every once in a while - like, say, every couple of days - i hear a "beep" from the box and the system freezes... lose the keyboard and mouse, and the display stays up but also freezes (for example, if a videos vid was playing, it would just freeze). have to physically reboot to get the system back. i assume this has nothing to do with the os or any app (although i'm usually browsing with chrome or ff when it happens). not being a hardware guy... can anybody clue me in as to how to figure out what's causing the problem?
View 2 Replies
View Related
Jun 16, 2011
I'm experiencing constant system freezes, and was wondering which log file to view in order to determine what is causing it. I switched over from linux mint as it was giving me the same issues now being experience on my debian setup.
When my system does freeze, the keyboard is unresponsive (caps lock won't even turn on) and I have to use the power button to get out of it. The only thing that does work is my wireless mouse which I can still move around.
View 14 Replies
View Related
Jan 12, 2010
I'm very new to Linux and have installed debian Lenny.
but I have met some problems. The biggerst one is that I cant start debian.
To be more exactly, debian freeze after i come to the loggin scean, I cant move the mouse and i cant wright.
You may say that this is hardwear error but its not, cus i can run grubs singel-user-mode and do whatever i want in the shell.
so my question is, how do i fix this from shell. I think maby I shld change something in xorg.conf but not sure what, and how.
View 9 Replies
View Related
Apr 1, 2010
When I try to shut my PC down (press the shutdown button in KDE 4.3.4), the desktop quits, but the console screen does not appear (the CTRL+ALT+F1 screen). Well, technically speaking it appears but only a still (not blinking) cursor is shown, otherwise the whole screen is blank. This means that not only the X freezes but whole system, because the keyboard is unresponsive too. It happend multiple times now, and every time I reboot after such event, some kde rc files (amarokrc, kmailrc, etc...) get deleted due to the automated filesystem check (unclean umount), which means that I have to reconfigure these apps again.
My home partition is on a separate EXT2 partition (this way I have full r/w access from winxp) and every time this is the only one which gets corrupted. The system partition (which is EXT3) is always intact (no fsck starts on boot). I'm using Debian Squeeze by the way.
View 1 Replies
View Related
Feb 16, 2015
I made a fresh installation of Debian.
Code: Select all[VOSTRO200@root]#uname --all
Linux VOSTRO200 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux
I changed to the kde desktop environment. I logged in as a normal user, and left the computer running for a few hours. when I came back the screen was turned off and the system does not respond to mouse movement, pressing the keyboard, or any combination thereof. I tried
Code: Select allCtr+Alt+F1,
CapsLock
First time i touched keyboard the led of numlock turned off, and never back. Blanking the screen itself does not cause a system crash, this occurs after several hours of inactivity.
.xsession-errors
Code: Select all/etc/gdm3/Xsession: Beginning session setup...
localuser:bartek being added to access control list
openConnection: connect: Nie ma takiego pliku ani katalogu
cannot connect to brltty at :0
Failed to connect to the VirtualBox kernel service
[Code] ....
View 3 Replies
View Related
Mar 18, 2010
I'm having some trouble hooking my external flatscreen monitor up to my Toshiba Tecra's docking station and having Mint (or Debian) be happy with it. The laptop uses a widescreen monitor but my external is a 4x3; I wonder if this is causing problems. Of course, it may just be the Intel 82801G graphics adapter.et things up properly in the Display Preferences config window (I'm using Gnome, btw) but when I hit apply, the system locks and I have to hard boot. I've never set up a linux box with multiple monitors before, let alone multiple monitors that require different resolutions.
View 3 Replies
View Related
Jul 11, 2009
The system runs just fine then all of a sudden it "freezes". For example an input box doesn't respond nor can I scroll down the page. But when the system comes out of the freeze 5-15 seconds later, it suddenly does all the input that was used during the freeze. The scroll and letters suddenly show up. I don't loose mouse control and I can do some other system functions but not all of them.
Here are some various system info's
[osprey@host ~]$ uname -a
Linux host.tranquilpenguin.com 2.6.27.25-170.2.72.fc10.i686 #1 SMP Sun Jun 21 19:03:24 EDT 2009 i686 athlon i386 GNU/Linux
[osprey@host ~]$ firefox -v
Mozilla Firefox 3.0.11, Copyright (c) 1998 - 2009 mozilla.org
[osprey@host ~]$ df .....
View 6 Replies
View Related
Jul 19, 2011
Unlike FC14, in FC15 there are very limited options available in Date and Time settings.
I want to see day of the week, date and time with seconds in my clock panel.
I was able to get first two using "gnome-tweak-tool".
But I'm not able to display seconds in the clock.
how to enable seconds in the clock?
View 3 Replies
View Related
Nov 23, 2010
I had a problem where my system momentarily hanged for a few seconds. Sometimes when opened a window like Dolphin or when I made a window full screen, sometimes when clicking on the screen while watching a DVD or sometimes when I clicked on a button it just froze for a few seconds and responded.
I have fixed the problem by disabling "Processor Power Managament" in the Bios.
this happenend on my desktop computer. See specs in my signature
View 2 Replies
View Related
Feb 23, 2011
We have a weird problem with two PC's running SUSE 11.3. The built in PC speaker beeps every 2 seconds when you are typing.
One of the PC's (an old celeron with intel graphics, 32 bit suse 11.3) has had this problem for at least a year but we don't use the keyboard much. The other one is a Core i5 with nvidia graphics (suse 11.3 64 bit). This machine was fine until it was upgraded from suse 11.2 (with zypper dup).
It is like a torture and is driving us nuts. It only does this in X11 - text mode is fine. It's probably something obvious but we are stumped.
View 9 Replies
View Related
May 1, 2010
Just installed Lucid Lynx on my Desktop and after logging in I would get a 15-20 second pause before Gnome appeared. I found many many potential solutions for this problem on the Internet but none solved it. Finally figured out that it was due to the system seeing a floppy controller when I have no floppy drive. I was led to this conclusion by the following two lines in my syslog (System > Administration > Log FIle Viewer > Syslog).
May 1 18:27:04 Desk-Ubuntu kernel: [ 34.636665] end_request: I/O error, dev fd0, sector 0
May 1 18:27:16 Desk-Ubuntu kernel: [ 46.813441] end_request: I/O error, dev fd0, sector 0
Note the 12 second delay when it tries to read again.
So if you are getting the pause and seeing the same thing your system log then ...
Enter your BIOS and disable the floppy drive Use sudo and edit /etc/fstab commenting out the line with fd0 in it
Hope I can save someone else the headache of hunting through the Interwebs and finding 5 different solutions none of which worked. Learning as I go with Ubuntu so I didn't even know how to carry out most of the "solutions" which required more googling. I am migrating from FreeBSD due to application requirements
View 2 Replies
View Related
Mar 31, 2010
If I click on the shutdown bottom (in my lower panel) I get an new window to choose if I really want to shut down or restart or suspend or hibernate. Under that alternatives there is an text that says: "[...] The system will automatically shut down in 60 seconds." Why is the text "60" not running down like a countdown? Can I set another (shorter) time for the automatic shutdown (10 seconds)? If so, where? Or shut I just make another bottom to shut down immediately?
I use (normally) OpenSuse/SUSE Linux
Release 11.1
Kernel Linux 2.6.27.45-0.1-pae
Gnome 2.24.1
View 9 Replies
View Related
Nov 21, 2010
i have hd encryption activated on my swap and home disks. now every 20 min or so (not really periodic but definetly reproduceable) my system hangs completely for about 4 - 10 sec while the hd led is on. i have a dual core cpu which makes this even more odd. could this be a side effect of hd encryption especially on the swap partition?
View 3 Replies
View Related
Oct 3, 2010
I'm running ubuntu 10.04 as a mythtv box and it works mostly fine. But occasionally the system will hang during booting and the last messages I can see are code...
So, I don't know. What is the problem? This system is supposed to run mostly unattended, I can't check all the time whether it booted alright.
So what can I do?
View 5 Replies
View Related
Jul 20, 2010
I upgraded from 11.2 to 11.3 and found that there was no 3d support with the "nouveau" driver for the nvidia card. Then I linked in the nvidia repo and installed the nvidia driver. After that I noticed I had 3d support but things were a bit choppy, regardless of compositing or other tasks running. It appears that every 10 seconds the CPU load shoots up (on all 4 cores) and during about half a second all other activity is postponed, including mouse clicks, window moves, animations etc. Using the system monitor watching the CPU load, I see a train of load peaks traveling from right to left, 10 second intervals. Also done a graph on "paged in pages", same pattern, peaks on 6500/s. 11.2 Never exhibited this kind of behavior. Since I haven't found any similar postings I thought that some leftover of 11.2 may be the cause of this and since I am not an expert I would welcome any suggestions on how to tackle this.ystem: quad core Q6600, 3Gb mem, GEforce 8600GT, etcFwiw the load peaks are doubled, meaning peaks at 0, 3, 10, 13, 20, 23 etc seconds
View 9 Replies
View Related
Jul 17, 2009
i've got a non-typical problem here. i've got kvm-ed freebsd (its not so important here) stored on a block device - /dev/sdb8. i wanted to install fedora rawhide there but first i thought it's a good idea to do some backup. so here we go dd if=/dev/sdb8 of=freebsd.img bs=4k
theoretically, dd should do the thing without saying a word, but it doesn't. every time it stops after reaching 16GB filesize (partition is about 35GB) and completely locks the system (only reset helps).the dump worked only once, but when i tried to compress this big image 7z got stucked too and the system froze . the problem occurs when copying to the same drive or to different drive. i've got a partial kerneloops logs, but so far i haven't found the answer.
Code:
Kernel failure message 1:
BUG: Bad page state in process bash pfn:14a224
page:ffffe200048377e0 flags:0040000000000000 count:0 mapcount:0 mapping:0000000000000002 index:2a4b (Tainted: P )
Pid: 9711, comm: bash Tainted: P 2.6.29.5-191.fc11.x86_64 #1
Call Trace:
[<ffffffff810a2be0>] bad_page+0x11d/0x130
[Code]....
View 2 Replies
View Related
May 30, 2011
I've problem with fedora 15. If you detach usb disk without umount it before, system freeze.
View 4 Replies
View Related
Apr 22, 2010
Well i just installed ubuntu and its amazing but after playing around a little i installed compiz and when i restarted my laptop it just wont let me log on it keep freezing. i dono what to do
how do i over write it or replace it or fix this problem?
iv looked on the wiki and tried what it says it doesn't work
View 2 Replies
View Related
May 28, 2010
My partner and I share the computer, so we are normally both logged in.
When we come to turn the computer off, one of us will log out then the other shuts down (to have a clean shutdown), but when either one of us uses 'Logout' the system just freezes, no response, nothing, have to turn the machine off via power button.
We can 'switch user' fine, and everything else appears ok but log out fails, I did try reporting a bug on this, but seems to have got taken over with people with dual screens / SLI cards, taking it over and its not the same thing.
I get the 'impression' its a graphics driver issue, I'm using the 'recommended' Nvidia driver (am at work and can't remember which version sorry).
View 9 Replies
View Related
Jul 14, 2010
I'm putting this in general, because I'm not sure if many of the specifics are relevant.I have an everex cloudbook which I purchased from eBay with hardy herron on it.I finally got around, today (I've had it for a year), to installing netbook remix 9.10 with a usb key I had also purchased from eBay.Now, during the upgrade (using update manager) from 9.10 to 10.04, the system appears to have frozen.(desktop frozen, no response to keyboard or mouse).Now, I'm not sure if something could still be happening inside there, and if it would be a good idea to let the machine site overnight before rebooting it. Frankly, it happened once already, and I rebooted, and update manager just took up where it left off once I logged in.
I have not determined what's causing these freezes. It's not a new machine, of course (everex, afaik, doesn't even exist now), so maybe netbook-remix is too taxing on the hardware? I installed xfce to get away from the bloated netbook-remix graphical menu garbage, which did seem to allow the system to run faster. Anyway, the real question here is, while the interface appears frozen, could the upgrade still be developing under the surface? (I hear a fan running in there. There is no hdd to spin, but flash memory, so I don't know if the fan is any indication of internal activity). Would you wait to reboot it? (update mgr indicated 4 hrs remaining to upgrade, in the installing upgrades phase, not downloading, appears it froze during "Running post-installation trigger install-info"). Or just reboot it and see what happens (get update mgr to start again?)? The system never froze on me with hardy. It was pretty quick and snappy, in fact.
View 5 Replies
View Related
Jan 28, 2011
Running Ubuntu 10.4 32bit (only) on my system with ati graphics card. I just ran a software update, and I believe a new kernel was installed. When I rebooted, I saw the "Ubuntu" loading screen, but then the system froze up and the screen went completely blank. Thinking it was a graphics issue, I tried to press escape to get into the grub bootloader. However, when I pressed escape at the proper time, the system just rebooted.
Thinking that grub was broken, I used a live cd to purge grub from my system and re-install it. When I rebooted, I got the same initial problem: I get the "Ubuntu" loading screen, but then the screen goes black and the system appears to be frozen. Again, if I press escape to try the grub bootloader, the system just reboots.
View 1 Replies
View Related
Mar 26, 2011
Nothing too major here but today I had a few programs open and was doing a bunch of things and suddenly the system froze.
I am on 10.04 LTS -
Are there checks that I can do to see if everything is ok?
I had to turn the power off and re-booted and everything is fine, or rather, seems to be 100% fine - but more out of curiosity Id like to see if there are some checks that I can do.
I think that ubuntu creates a log of activity if I am not mistaken?
View 4 Replies
View Related
Mar 2, 2010
I'm running Fedora 12 with GNOME on an old Toshiba Satellite A15. From time to time I get a system freeze, where everything stops working besides the touch pad (I can move the cursor, just can't click on anything). When I boot up, I see an error message that it skips past before I can read anything, although I have spotted the snippets 'pci' 'error' and what appears to be the 0x at the start of a memory address. When I try and shut down the system (going either by command line or the System->Shut Down part), I get to the part where it says "Unmounting filesystems..." and then it stops right there. When I boot it back up, I get an error that says "A crash in package kernel has been detected."
The same happens when I boot up after the hard freeze. It seems more frequent when I have a heavy load on system memory, but for the most part it seems random. I've seen it crash after 5 minutes with only Pidgin or gedit open, I've seen it run for weeks with over 100 Firefox tabs, Pidgin, 3 documents, and GIMP running, but it seems more likely in the second scenario. It also seems to have a chance of freezing again within 5 minutes of rebooting (even if I don't touch anything after login). I ran Fedora 8 and Fedora 10 on this computer just fine, with most of the same system settings (copied my /home folder for each upgrade). I have a dual-boot system (XP/Fedora), with a third partition for data and a 200MB partition for the boot loader. The partition with Fedora is encrypted, and the crashing while trying to unmount the filesystem implies to me that might be the problem, but whatever it is, it wasn't in Fedora 8 or 10 (at least as far as I could tell).
View 4 Replies
View Related
Mar 27, 2010
My system clock loses about 10 seconds every minute. The hwclock is fine. I've tried different kernel args (clocksource=acpi_pm, nohz=off, highres=off). None of these have any effect. I am running Fedora 11 with kernel 2.6.30-105.2.23.fc11.x86_64 on an AMD Istanbul node (Processor 2439 SE).
View 3 Replies
View Related
