After installation of 11.3 I had intermittent hangs and blurred icons.
"My Computer" told me I had a Nvidia GeForce 9100 and a driver called "gallium". That was the problem.
I added "ftp://download.nvidia.com/opensuse/11.3" to my repository and found a new driver to install. That solved my problems. Now my systems are rock solid.
I have an problem with login in to a fresh installed Ubuntu with the nvidia drivers (graphics card nvidia 210). So far I have installed Ubuntu 10.04, Ubuntu 10.10 and Unbuntu 11.04, they all seem to have the same problem. when I log in the screen goes black and the pc's hangs. I can switch to a terminal before I login and everything seems operational. I can login to Ubuntu with a fail save x session.
View 8 Replies View RelatedI can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
I am trying a new install of opensuse 11.2 64 on my computer. I have tried all the F key options at the bottom of the installation screen but when loading the installation hangs at "Loading basic drivers..."I get the same issue with the 32 bit version of 11.2 and the 64 bit version of 11.1.The 32bit of 11.1 proceeds to install only to crash out with error 3030 when it tries to format an lvm parition.
View 9 Replies View RelatedUbuntu and right now I am running it inside Windows. I burnt it onto a cd so I could install it onto my 2nd harddrive. I know the cd is fine. When I boot off the cd a purple screen loads up with some weird symbols at the bottom looks like a picture of a battery = and then a picture of a stick figure man. If I hit f6 I can get to the option screen. I've tried using noapci, nomodeset, disabling the framebuffer, and vga=normal. None of them work as soon as I hit enter to start installing Ubuntu it just sits there on the menu screen and never does anything.
View 5 Replies View RelatedI got a new ASUS EeePC 1015PEM with Windows 7 with the intention to install OpenSuse 11.3 onto it for having a dual booting netbook with enough disk space.I'm installing from an external DVD drive, the checksums of the ISO were ok as well.However, the OpenSuse installer fails at starting up after selecting the action. It hangs, no matter what menu entry I chose, at "loading basic drivers", forever.Because this isn't necessarily an unknown problem I've tried some of the predefined kernel options of the main installer menu. Then I tried some manually entered kernel boot options that helped me in some other installations:
acpi=off, apm=off, CPUFreq=noNone of them seem to have an effect on the installers behaviorI hope that there is people who managed to solve this problem with an actual EeePC model... because I really don't know what I could any more. It's kind of frustrating to not even get past the kernel launch I haven't tried any other distros installation discs, but I don't even intend to. I want OpenSuse because I'm running it on our firms machines as well and don't like shifting between systems.
This navigation icons on this page are blurred: [URL] For example, the top row nav buttons, Home:Show Notes:Articles:Screencasts:About Us. As well as the CC icons in the left column. And at [URL] All of the nav button in yellow across the top have very blurred text, as well as most of the photos of products on their pages have jagged edges. In Windows these things are crystal clear--no blurring, no jagged edges.
View 3 Replies View Relatedi got a live opensuse 11.4 dvd, and on both trying Live gnome desktop and also on installation the desktop is very blurred. This my first time using opensuse. the screenshot is show in the link ImageShack® - Online Photo and Video Hosting . i am unable to see or work anything. i suspect it is my nvidia graphics card problem but i am not sure. Nvidia GeForce 7100/Nvidia nforce 630i
View 9 Replies View RelatedI need to install the latest drivers for my Nvidia card. I have the Quadro FX 1800.I don't think the Nvidia One click installation will work with this card.I downloaded the drivers from Nvidia and tried to install them but their directions are very confusing. It says "exit x windows" and "restart in init 3". I don't know what that means.Can someone tell me step-by-step how to compile and install the nvidia drivers?I have opensuse 11.2 64-bit clean install with all the defaults, and the Quadro FX 1800.
View 6 Replies View RelatedI am running openSUSE 11.2 64-bit KDE version. I would like to install drivers for my Nvidia GTX 285 1gb video card. How exactly would I do this?
View 2 Replies View RelatedLappy is a Dell XPS M1330
Intel core 2 T7500 2.2Ghz 4gig Ram
Nvidia GeForce 8400M GS
HDD 320
1 64bit system installs but wont let me do updates so now using 32bit thats ok
2 How do I update drivers? My screen seems to have ghosting around the edges
3 On firefox when scrolling down the page its jerky Ive used firefox on most of my Pcs and never had this problem Im duel booting ubuntu and suse and using the internet on ubuntu so far other than these problems suse is fine
Alright I've been trying despretly to installed the nvidia drivers.If reinstalled them over and over but it just wont work. I have Gefore GTX 275 and I installed it using the one-click install.
It apperently installs but it doesn't run or something.
To install the proprietary drivers must be change before the grub?
SDB:NVIDIA drivers - openSUSE
I do not understand where I put the option nomodeset
Like a guy earlier today report a problem with Opensuse 11.2 working fine on his machine but 11.3 is not. I have somewhat the same problem. The default installation freezes randomly. I have seen this error before with Intel video cards but never with NVIDIA. Right now, I'm using VESA in failsafe mode and trying to install some drivers from this repo.
I'll try and find a fix for this. (Hope their is one)BTW, can anyone confirm when the official drivers for NVIDIA cards are coming out?
Basically everything was going fine, and i was enjoying the OpenSuse experience, then downloaded djl (Games Launcher) , installed some games and found that i had a very very very bad frame rate (about 1FPS), and my GPU is a NVIDIA GTS250 (1GB), and runs most games flawlessly under m$, so i went about installing the graphics drivers for my card. I followed the instructions and was under the assumption that i installed the correct ones, but now i cannot boot into any graphical interface. I think that it should be a graphics issue, as this was one of the few things done before rebooting. I have tried booting into the normal mode, and the failsafe, I have read many other "Not booting'' posts, and have tried their solutions without success, there include: Changing the boot parameters Logging in and manually trying to boot up the gui (init 3.... init 5... etc)
When the computer tries to load up OpenSuse in normal mode, it comes up with the normal loading screen, and then about 90% of the way it stops for about 30 seconds, and then switches over to a CLI, asking for a login, going through the log a couple of things fail, did have these noted down (but cannot find and will post along with other commands that i am asked to do) I want to try and avoid a reinstall as it took me a long time to get the WiFi card working.
I've recently jump from the Ubuntu/Mint ship, and figured I've give a polished KDE distribution a shot. Of course I turned to OpenSuSE, and I love it so far. I've resisted KDE quite a lot since 4.x came out but it's really come along. Much better than the (in my opinion) monstrous disaster that Gnome has become.
Anyways, on to my problem: I've installed the proprietary Nvidia drivers via the one-click-install shown in the wiki, and that worked great. But now my resolution at boot - that is the boot/loading screen, not my desktop - is shown at a very low resolution instead of my native resolution, like it was with OpenSuSE's default open-source Nvidia driver, which I'm guessing is Nouveau. On Ubuntu, this was pretty easy to correct; all you had to do was edit /etc/default/grub and put your resolution there, and tinker with some other options so that instead of Plymouth trying to set its own, it just carries over Grub's specified resolution. But I can't seem to do that with OpenSuSE. For one, I don't see /etc/default/grub, and more than that, I don't think you guys use Plymouth. I could be wrong on that second point, though. So, how can I change the boot screen's resolution to my native resolution? I'm using the latest Stable release (11.4) and latest Nvidia drivers. Other than that, the install is new.
Being a total beginner to linux, I can't seem to find a decent guide on how to install these drivers without much hassle, even though I've been searching for almost couple of hours now.
First, my system specs, taken with Hard Info
Processor: 2x AMD Athlon(tm) II X2 240 Processor
Memory: 3091MB (1865MB used)
Operating System: Ubuntu 10.04.1 LTS
-Display-
Resolution: 1360x768 pixels
OpenGL Renderer: GeForce GT 220/PCI/SSE2
X11 Vendor: The X.Org Foundation
-Multimedia-
Audio Adapter: HDA-Intel - HDA NVidia
Audio Adapter: HDA-Intel - HDA NVidia
-SCSI Disks-
HL-DT-ST DVDRAM GH22NS50
Now, I've installed the "default" (dunno if that would be the correct categorizing) driver with the "Hardware drivers" utility from System->Preferences->Hardware drivers because I've failed numerous times trying to install the package from nVidia site ; I would always get an error while trying to run the package :
"It seems that X server is running on your linux, please deactivate it to install this package" or something like that, but I'm sure it was about X running.
I have installed openSUSE with Gnome3.
I had to install the nVidia proprietary drives so the OS would boot into Gnome3 and not fail safe mode. Without the proprietary drivers installed the display settings said:
Driver: software rasterizer in use
After installing the nVidia drivers Gnome3 works in one monitor, but I would like to be able to use my other two monitors (totaling three with two video cards.)
When I run nvidia-settings to generate an xorg.conf file it hangs, so I used nvidia-xorgconf to generate the xorg file and then used nvidia-settings to configure my extra screens.
This fails with a permissions error, running sudo nvidia-settings fails with the following error:
ERROR:
So, I ran nvidia-settings, saved the settings file to my /home/$USER dir, then copied xorg.conf to /etc/X11/
Logging out and logging back into Gnome fails with the error:
This problem extends to Ubuntu running Gnome3, so my thinking is:
a) Imma id10t and something in my xorg.conf file is wrong,
b) there is an issue with Gnome3/nVidia/Multiple displays.
I would really like to use Gnome3, it works on multiple other machines (ironically all ATI devices) just not the machine I use all day long...
Here is my xorg.conf file as generated by nvidia-settings.
Code:
I'm trying to install the current drivers (from the Hardware Drivers tool) but it fails, refering me to jockey.log, which contains this:
Code:
2010-05-23 16:19:46,978 DEBUG: nvidia_current is not the alternative in use
2010-05-23 16:19:47,106 DEBUG: nvidia_current is not the alternative in use
[code]....
I have compiled the proprietary nvidia drivers for 11.3. When I boot, even using the nomodeset boot option, the nouveau module still loads, causing gdm/X to fail. I am able to manually remove the modules with rmmod and restart gdm. Everything then works normally. I have added the line "blacklist nouveau" to both 50-blacklist.conf and 99-local.conf in /etc/modprobe.d
View 7 Replies View RelatedMy install of 11.4 (& 12.1) won't load unless I add the X11failsafe option to the loading of 11.4 (& 12.1) in the Grub menu.lst file. They bomb out after resetting the video when booting. I don't need to do this with my 11.3 install. Upon closer inspection 11.3 is using the nouveau nVidia driver, whereas both 11.4 & 12.1 are using the fbdev nVidia driver. My Hardware is a GEForce 6150SE and a Samsung SyncMaster 933SN. I have a couple of questions
1) What do I lose by adding the X11failsafe option in Menu.lst?
2) Can I, should I, replace the fbdev driver with something else. If yes, What? Nouveau?
I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.
I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!
I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.
View 9 Replies View RelatedI have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
View 5 Replies View RelatedSo I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
Tried to install Suse 11.4 on Core 2 Duo 3.16 GHz 4 GB RAM PC alongside Win XP.Installation progress was fine. I rebooted. The gecko appeared and the process bar kept going just about 1/10, then froze. I saw that it froze at the Loading AppArmor Mounting security fs on /sys/kernel/security.I tried safe-mode and it also froze at the same step. tried installing suse 11.3 -- and ended up with the same problem.
View 1 Replies View RelatedI want to try the new 11.1. When I start the installation (x86_64 DVD), the startup is hanging. The last message is "Starting udev...". Keyboard is completely frozen, only reset button is working. Mobo is an Intel DG965WH with 4GB RAM and ATI Graphic card (ASUS1950pro). My opensuse 11.0 runs without any problems.
View 9 Replies View RelatedSometimes, running "nvidia-settings" will cause the whole desktop to freeze for about 5-10 seconds, spike the Xorg CPU usage up to 100%, until the settings appear where everything goes back to normal.
Running "nvidia-settings" from a terminal does not show any output and restarting X does not help. Any ideas how to figure out what is happening, any places to look for log files?
I am using an up-to-date openSUSE 11.3 (64-bit), KDE 4.5.2, an NVIDIA GeForce 9800GT and the proprietary NVIDIA driver 260.19.12, which I installed manually following the instructions from
SDB:NVIDIA the hard way - openSUSE
the url to the nividia drivers for 11.3. They are not yet in the community repos.
View 9 Replies View Related