OpenSUSE :: System Momentarily Hangs For A Few Seconds?
Nov 23, 2010
I had a problem where my system momentarily hanged for a few seconds. Sometimes when opened a window like Dolphin or when I made a window full screen, sometimes when clicking on the screen while watching a DVD or sometimes when I clicked on a button it just froze for a few seconds and responded.
I have fixed the problem by disabling "Processor Power Managament" in the Bios.
this happenend on my desktop computer. See specs in my signature
View 2 Replies
ADVERTISEMENT
Jul 20, 2010
I upgraded from 11.2 to 11.3 and found that there was no 3d support with the "nouveau" driver for the nvidia card. Then I linked in the nvidia repo and installed the nvidia driver. After that I noticed I had 3d support but things were a bit choppy, regardless of compositing or other tasks running. It appears that every 10 seconds the CPU load shoots up (on all 4 cores) and during about half a second all other activity is postponed, including mouse clicks, window moves, animations etc. Using the system monitor watching the CPU load, I see a train of load peaks traveling from right to left, 10 second intervals. Also done a graph on "paged in pages", same pattern, peaks on 6500/s. 11.2 Never exhibited this kind of behavior. Since I haven't found any similar postings I thought that some leftover of 11.2 may be the cause of this and since I am not an expert I would welcome any suggestions on how to tackle this.ystem: quad core Q6600, 3Gb mem, GEforce 8600GT, etcFwiw the load peaks are doubled, meaning peaks at 0, 3, 10, 13, 20, 23 etc seconds
View 9 Replies
View Related
May 1, 2010
Just installed Lucid Lynx on my Desktop and after logging in I would get a 15-20 second pause before Gnome appeared. I found many many potential solutions for this problem on the Internet but none solved it. Finally figured out that it was due to the system seeing a floppy controller when I have no floppy drive. I was led to this conclusion by the following two lines in my syslog (System > Administration > Log FIle Viewer > Syslog).
May 1 18:27:04 Desk-Ubuntu kernel: [ 34.636665] end_request: I/O error, dev fd0, sector 0
May 1 18:27:16 Desk-Ubuntu kernel: [ 46.813441] end_request: I/O error, dev fd0, sector 0
Note the 12 second delay when it tries to read again.
So if you are getting the pause and seeing the same thing your system log then ...
Enter your BIOS and disable the floppy drive Use sudo and edit /etc/fstab commenting out the line with fd0 in it
Hope I can save someone else the headache of hunting through the Interwebs and finding 5 different solutions none of which worked. Learning as I go with Ubuntu so I didn't even know how to carry out most of the "solutions" which required more googling. I am migrating from FreeBSD due to application requirements
View 2 Replies
View Related
Oct 28, 2010
Sometimes, running "nvidia-settings" will cause the whole desktop to freeze for about 5-10 seconds, spike the Xorg CPU usage up to 100%, until the settings appear where everything goes back to normal.
Running "nvidia-settings" from a terminal does not show any output and restarting X does not help. Any ideas how to figure out what is happening, any places to look for log files?
I am using an up-to-date openSUSE 11.3 (64-bit), KDE 4.5.2, an NVIDIA GeForce 9800GT and the proprietary NVIDIA driver 260.19.12, which I installed manually following the instructions from
SDB:NVIDIA the hard way - openSUSE
View 8 Replies
View Related
Sep 29, 2010
KDE tends to freeze momentarily after performing some tasks, like closing a window, pressing a button that should result in an option pane being popped, or simply trying to drag a window around the desktop. It doesn't happen every single time, but it's very persistently. I first noticed that the mouse would freeze sometimes when I do something like close a window and it takes 3~4 seconds for me to get control back, and for the task that I requested (close a window for instance) to be carried out.
During this time, I notice that all of KDE freezes up because my binary clock widget freezes as well. Is this a known problem with KDE? Can somebody give me some advice as to what might be causing this behaviour? I recall having similar problems back when I first tried 11.0, but back then it was so bad that I ended up going with Gnome. Now KDE has me hooked again, except for this one niggling issue. If I can get this resolved, then I think I will finally have an absolutely stable linux desktop.
[Code]....
View 9 Replies
View Related
Feb 23, 2011
We have a weird problem with two PC's running SUSE 11.3. The built in PC speaker beeps every 2 seconds when you are typing.
One of the PC's (an old celeron with intel graphics, 32 bit suse 11.3) has had this problem for at least a year but we don't use the keyboard much. The other one is a Core i5 with nvidia graphics (suse 11.3 64 bit). This machine was fine until it was upgraded from suse 11.2 (with zypper dup).
It is like a torture and is driving us nuts. It only does this in X11 - text mode is fine. It's probably something obvious but we are stumped.
View 9 Replies
View Related
Mar 31, 2010
If I click on the shutdown bottom (in my lower panel) I get an new window to choose if I really want to shut down or restart or suspend or hibernate. Under that alternatives there is an text that says: "[...] The system will automatically shut down in 60 seconds." Why is the text "60" not running down like a countdown? Can I set another (shorter) time for the automatic shutdown (10 seconds)? If so, where? Or shut I just make another bottom to shut down immediately?
I use (normally) OpenSuse/SUSE Linux
Release 11.1
Kernel Linux 2.6.27.45-0.1-pae
Gnome 2.24.1
View 9 Replies
View Related
Nov 21, 2010
i have hd encryption activated on my swap and home disks. now every 20 min or so (not really periodic but definetly reproduceable) my system hangs completely for about 4 - 10 sec while the hd led is on. i have a dual core cpu which makes this even more odd. could this be a side effect of hd encryption especially on the swap partition?
View 3 Replies
View Related
Jun 17, 2010
I am looking to speed up my boot time; it is currently around the 2-2.5 minute mark from Grub to desktop (including about 15 seconds at the login screen while I type my password).
I have forced ureadahead to reprofile, and have rebooted a few times until the boot time is fairly stable/consistent.
No xorg errors and only one warning ((WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.)
However, dmesg reports the following:
Code:
...
[ 1.121369] Freeing unused kernel memory: 656k freed
[ 1.121926] Write protecting the kernel text: 4676k
[ 1.121977] Write protecting the kernel read-only data: 1840k
[ 1.146159] udev: starting version 151
[Code].....
View 9 Replies
View Related
Jan 20, 2011
I created a ubuntu distro that originated from ubuntu server and have an xserver installed with openbox and am having problems getting autologin working. I had slim installed and everything seemed to be working except as soon as the monitor went into sleep mode and I moved the mouse to get it back it just came up to the shell again. With that problem I decided to remove slim and go with NODM and that worked perfectly for what I wanted but I was messing around with a few other configuration stuff and when I rebooted everything was fine until after the splash when it would normally boot into X it would show the shell for a about 10 seconds before it would boot to X.
View 2 Replies
View Related
May 20, 2010
I have Centos 5 Installation with following Linux ipmpls.mobilink.net.pk 2.6.18-8.el5xen #1 SMP Fri Jan 26 14:42:21 EST 2007 i686 i686 i386 GNU/Linux. I have Nagios running on it for monitoring switches. It also runs postfix to give email alerts in case of a switch is unreachable. The problem is that the server hangs for a minute and returns to normal operation. During this period if a switch is polled it cannot be reached and hence Nagios shows the Flapping state on the switches. I need to understand as to why the server hangs
View 1 Replies
View Related
Aug 6, 2011
At boot time, my computer hangs for 15 seconds before continuing. This is the message that I receive:Starting the hotplug events dispatcher: udevderror binding udev control socket 1...(warning).Waiting 15 seconds and trying to continue anyway...(warning).
View 1 Replies
View Related
Aug 12, 2010
I'm having a few problems with flash objects in Firefox. When I load a page with flash - ..... for example - the flash object is just a grey box and firefox hangs for 30 seconds or so. When firefox finally responds again all that's left of the flash object is a black box. Does anybody know what the problem is? And even better - what I can do to fix it!
For background info - flash was working fine in F12 before I updated to F13. Used the install DVD for F13 to perform the update. I'm running F13 64bit with KDE, Firefox is showing Shockwave Flash in the addons list. Originally installed the flash plugin using the instructions from mjm wired:
Code:
[mirandam@charon Download]$ sudo yum install nspluginwrapper.{i686,x86_64} alsa-plugins-pulseaudio.i686
[mirandam@charon Download]$ sudo yum install flash-plugin I've tried removing those packages and reinstalling but no luck.
View 14 Replies
View Related
Jul 24, 2010
I try to play some music with my PlugComputer and I use an USB audio key. I have succefully installed linux-sound-base, alsa and mpg123. When I run mpg123 the sound loud during 5 seconds and stop. After the device is locked and nothing can be played without rebooting.
[Code]...
View 3 Replies
View Related
Mar 28, 2011
I have an old averatec machine (3200 series) Slackware 12.2 is working fine out of the box (13.1 is not even booting after installing, so i decided not to work in this direction) except for the wireless. the wireless is working some seconds after putting the interface up, later stops working, and if you mess around a little with the interface, the computer will hang (caps and num lock will flash and thats all) I tried diffferents kdrivers (right now i downloaded the latest linuxwireless and im using those drivers) same situation. was working fine with kernel 2.24 and old drivers (the iface wass called ra0, right now is wlan0) I know this is not much information, but i will try to get another pc to make a ssh and beeing able to get some traces.
View 5 Replies
View Related
Mar 31, 2011
About once a day, my system seems to hang (mouse can't be moved, no keyboard input possible, screen stays unchanged)
After a restart I can find an error in /var/log/kdm.log:
Code:
X.Org X Server 1.9.3
Release Date: 2010-12-13
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
[Code].....
View 5 Replies
View Related
Aug 25, 2010
nfs client hangs system for 3 to 5 minutes during boot, Does any one have any clues?
The last message before the hang is 'Starting NFS client services: sm-notify idmapd'.
My fstab looks like this:/dev/system/swap swap swap defaults 0 0
/dev/system2/swap swap swap defaults 0 0
/dev/system2/root / ext4 acl,user_xattr 1 1
[Code]....
View 2 Replies
View Related
Jul 18, 2010
I upgraded OpenSUSE 11.2 to 11.3 today using Zyyper on my laptop. Everything went fine with no errors whatsoever. At the end, a message was displayed at the terminal asking me if I want to see the notifications. I pressed "Y" and the system hanged there and then. I had to do a hard reboot. After reboot the system booted fine but hanged at the desktop with no response from the keyboard, mouse, touchpad, etc. The situation's same after many reboots. System boots fine but hangs at the desktop. Screen resolution changed to 800x600.Only power button works! I use it to log off and then do a reboot.
View 9 Replies
View Related
Feb 5, 2010
I have updated to the new kernel that was available from 11.2 and now I cant use my system.
It boots up into kde 4.3.5 and then right when its just finishing it freezes everytime and I hear that last tone of the bootup sound ring continually until I force a shutdown. Anyone else have this issue with the update?
View 9 Replies
View Related
Mar 16, 2011
The module e1000e is loaded into system. At addition VLAN the system hangs at a stop VLAN or configure other devices (sound, video). In OpenSuSe 11.3 it worked correctly.
MB: ASUS P5Q-ME DO / NetCard: Intel 82567LM-3
View 2 Replies
View Related
Feb 18, 2011
Just upgraded to 10.04 on Wed and noticed an instability. It's intermittent, so can not tell you what triggers it, but when it kicks off a commandline screen comes up, with a command pointing to some battery monitor software, and I have a desktop, so no battery and wonder why my machine has a battery monitoring software, when none should be installed. Anyway the screen stays up momentarily, then the system tries to go into something like a screen saver and I get all garbage on the screen, loose all ability to control and have to perform a hard reboot to recover from this.
View 9 Replies
View Related
Dec 30, 2010
I have a server running Ubuntu 10.04. I use it for mysql as well as samba file sharing across 10 computers. It had been working out great. I only ever needed to restart after I would install updates and to sort of thing. Starting this week however, it has started kicking all the computers off of both mysql and the samba shares every few minutes. It is very strange. The mysql connection can be restored just by closing the database and reopening it. The file shares are only a problem if you try to access them though a program other than your file browser (e.g. save a file you are working on in word to the server). The server never shuts down and all services can be reconnected immediately. It is very strange. I do believe that the server installed some automatic updates at the beginning of this week when this all started happening. I am not sure if one of the updates is causing the server to do this or not.
View 1 Replies
View Related
Jun 20, 2011
I'm experiencing some weird short freezing issues in Squeeze and / or unstable. Everything works as usual, then the system will freeze for some seconds if I don't do anything, or resume faster if I move the mouse or hit a key on the keyboard. I thought it was a wifi related problem, as I have an intel iwl4965 , here is what I often see in dmesg:
[ 2608.910307] iwl4965 0000:06:00.0: Queue 4 stuck for 2000 ms.
[ 2608.910317] iwl4965 0000:06:00.0: On demand firmware reload
[ 2608.912832] ieee80211 phy0: Hardware restart was requested
View 8 Replies
View Related
Jan 25, 2011
Have a seagate laptop hard drive, it spins up momentarily, makes some quiet electronic 'zipping' sounds then stops. After this, it is still reachable by the seagate utility, which says the hard drive is experiencing too many read errors, but the platters are definately not spinning.
View 4 Replies
View Related
Jul 11, 2009
The system runs just fine then all of a sudden it "freezes". For example an input box doesn't respond nor can I scroll down the page. But when the system comes out of the freeze 5-15 seconds later, it suddenly does all the input that was used during the freeze. The scroll and letters suddenly show up. I don't loose mouse control and I can do some other system functions but not all of them.
Here are some various system info's
[osprey@host ~]$ uname -a
Linux host.tranquilpenguin.com 2.6.27.25-170.2.72.fc10.i686 #1 SMP Sun Jun 21 19:03:24 EDT 2009 i686 athlon i386 GNU/Linux
[osprey@host ~]$ firefox -v
Mozilla Firefox 3.0.11, Copyright (c) 1998 - 2009 mozilla.org
[osprey@host ~]$ df .....
View 6 Replies
View Related
Jul 19, 2011
Unlike FC14, in FC15 there are very limited options available in Date and Time settings.
I want to see day of the week, date and time with seconds in my clock panel.
I was able to get first two using "gnome-tweak-tool".
But I'm not able to display seconds in the clock.
how to enable seconds in the clock?
View 3 Replies
View Related
May 17, 2010
[I'm not sure if this is the right forum. This is the closest I've found]. I've installed Ubuntu 10.04 LTS (dual boot with Windows XP SP3). After Ubuntu starts, it takes about 10 seconds, and the computer halts. No screen/mouse/keyboard activity. If I start Ubuntu under Recovery Mode, with failsafeX, it doesn't happen.
In the Windows all is fine. What did I wrong? [My CPU is: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz, if it matters...]
View 9 Replies
View Related
Sep 26, 2015
So i just finally installed Debian Jessie OS, replacing Ubuntu. But now it is running extremely slow. It's not internet connection. The internet speed is running fine (Videos load quickly), but it's like the system freezes every 30 seconds or so. A video can be fully loaded but still stops and starts constantly. Just browsing the internet, or non-internet things do the same also. I switched back to Ubuntu to see if it was different on there, but Ubuntu is running fine.
View 4 Replies
View Related
Mar 27, 2010
My system clock loses about 10 seconds every minute. The hwclock is fine. I've tried different kernel args (clocksource=acpi_pm, nohz=off, highres=off). None of these have any effect. I am running Fedora 11 with kernel 2.6.30-105.2.23.fc11.x86_64 on an AMD Istanbul node (Processor 2439 SE).
View 3 Replies
View Related
Aug 21, 2011
I'm running Fedora 14. I'm running a Athlon X2 with 4gb memory and nVidia 8400. I'm using the nvidia drivers ver 260. I'm running KDE 4.6. I've disabled desktop effects (when turnt on they work a charm, performance issues are the same either way). If I open any more than a few applications at once, the system grinds to a halt. even working with Kwrite is painful and it can take several seconds just to move the cursor, browsing the file is almost impossible.
When I have even 7 windows open X goes into a frenzy and sticks around 90% cpu usage. Even with no windows open if I move my mouse between screens X cpu usage stays between 50% and 90%. The system is unbearably slow. i have a XP Pro system with the same spec, lower GPU and I have no problems having 2/3 Visual Studios open, Photoshop, a few skype windows, Eclipse and the android emulator the system remains responsive but with this Linux box I can't even do basic stuff in Kwrite without it grinding to a haltJust.
View 4 Replies
View Related
