Today I launched my opensuse and I noticed that it takes so much time for the kde to load . As I also receive some strange messages I took a picture of my desktop after the boot up process.
ImageShack® - Online Photo and Video Hosting
Few things
-Takes so much time to load (like 3 mins, was 30 secs before)
-there a problem top left corner of my screen "The process for the file protocol died unexpectecdly". This is a small plasma widget showing the contents of a folder.
-The KMixCtrl crashes. There is only one sound device at my system which was always . This problem first appeared today.
-Bottom left of the corner: There was a virtual desktop switcher where you could swap between four different widgets. Right now only one icon is visible.
-whole system is not that responsive
I didnt change anything drastically in my system (not sure if any system upgrade was executed)
I tried to find and see if there any kde log files but could not find any.
some technical info are :
cat /etc/issue
Welcome to openSUSE 11.3 "Teal" - Kernel (l).
Today I launched my opensuse and I noticed that it takes so much time for the kde to load . As I also receive some strange messages I took a picture of my desktop after the boot up process.
ImageShack® - Online Photo and Video Hosting
Few things
-Takes so much time to load (like 3 mins, was 30 secs before)
-there a problem top left corner of my screen "The process for the file protocol died unexpectecdly". This is a small plasma widget showing the contents of a folder.
-The KMixCtrl crashes. There is only one sound device at my system which was always unconfigured. This problem first appeared today.
-Bottom left of the corner: There was a virtual desktop switcher where you could swap between four different widgets. Right now only one icon is visible.
-whole system is not that responsive
I didnt change anything drastically in my system (not sure if any system upgrade was executed)
I tried to find and see if there any kde log files but could not find any.
some technical info are : cat /etc/issue Welcome to openSUSE 11.3 "Teal" - Kernel (l).
I just installed my Lubuntu, but I upgrade to lubuntu 11.04 (natty), after that I decided to try unity, so I installed ubuntu-desktop and unity, but when I try to start session on Ubuntu or unity it told me the title error, then I got the error.It open me a session without any menues and just a clean desktop.On another topic, after I upgrade, Lubuntu ask the password each time I turn on my computer, But when I try to change the settings and click on the button that say: enter session without asking password, that button appear locked.How do I unlock it?
I have an older PC that was running F11 without any problems. At some point I started updating to F12 through the web and got a a nice black screen that pretty much hosed my OS. (Not a big deal).So I went and downloaded the F12 Live CD which did the same thing.., at some point just after install the screen would be black and reset is the only option.Got the full F12 32-bit DVD and during the installation I get: "X Startup Failed,Falling back to text mode."Finishing the install I get to a nice black log-in prompt so I can log-in as root.From there I cant do much as I am a n00d in Linux to some extent and my network doesn't work
My video card is a Geforce FX 5200 which installed and worked just fine under F11 (without me doing anything but basic install and Ubuntu 9.10)
just built a computer and wanted to try out some linux.
First off I burned the Fedora 10 x86_64 disk image (using disk utility on my mac at 4x speed then verified it) to a dvd. I start the install. "x startup fails to load, falling back to text mode" comes up. I use the text install then. It gets to the actual installation of the different packages then a black screen shows up with white text that's highlighted red (sometimes it's blue). It then freezes and I reboot. Sometimes it freezes at different points and with different messages, but the description above is what happens most often.
I try writing it at 1x speed and verifying. same thing.I try the Live CD. It freezes.Then I tried Fedora 9. same thing.
Next I go to Ubuntu 8.10.I try the regular install, but the orange loading bar freezes.I try the Live CD-like install. It runs!...but when i go to install, when it gets to the partitioning part, it freezes and becomes unresponsive.
Each time it froze I let it sit for about 10 minutes, just to make sure it is in fact frozen. I've tried these installs numerous times.
Can anyone suggest a good free Virtualization Software Package that work on OpenSuse with the KDE Desktop, as I need to use Windows for some applications that have not got a Linux equivelant, Namely Reserch In Motions BlackBerry Desktop Manager and the drivers for my Printer and Scanner, so I would also need something with USB pass through. Or if there isn't any free virtualization software that will dowat I want that's free then something that is not expensive that's paid for. I like the look of Parallels Desktop 4 for Windows & Linux but I'm not sure if I would be able to justify paying �54.99 for the ammount of use that it will get?
I am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
I installed the latest version...Everything works like a charm. I have Windows Home Server 2003 running and would like to access all of my folders. How can i setup OPENSUSE to find/access my Windows Home Server 2003. Can you help me with this. Just to let you know. Am i missing something so i can access them locally.
The rsync module "opensuse-full" which worked well so far seems currently broken. It tries to mirror a huge number of additional stuff (factory?) but fails with "permission denied". Any place where I could report this?Command:
This is an example of the error I receive when trying to do an update via YaST, YaST2, or zypper. Basically, curl is broken. With out it functioning normally, I can't use openSUSE's update mechanism to fix my system. Need to find a way to manually fix / upgrade curl.There was an error in the repository initialization.'Updates-for-openSUSE-11.4-11.4-0': [|] Valid metadata not found at specified URL(s)History:
- Unknown error reading from 'http://download.opensuse.org/update/11.4/' - SKIP request: User-requested skipping of a file - Download (curl) error for
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory bash: ./etc/sysconfig/chron : cannot execute binary file X_MOUSE_CURSOR : Undefined variable
I recently installed opensuse 11.4 on a remote server. It has GNOME installed as a desktop. The problem I am experiencing is that when logged in through VNC, most of the GUI apps are not functioning, especially ones that require root privs. Example: The Add/Create users context does not function. After you supply root pw, nothing happens. If you launch it from a terminal, you see this:
jjmuw@g01:~> xdg-su -c /sbin/yast2 users Xlib: extension "RANDR" missing on display "::1:1.0". No protocol specified No protocol specified
[code]....
(y2base:4872): Gtk-WARNING **: cannot open display: ::1:1.0
Followed by a hang. This is also affecting things like the Xen configuration contexts (creating/managing VMs).
Is there some blog, changelog, or place where i can track what issues get fixed in the opensuse gnome 3 implementation, or what features are bein added, what changes are bein made, etc.?For example, if there is some bug in opensuse with gnome 3, where can i read that it has been fixed in the dd/mm update, or that new feature xxxyyy was added in dd/mm update, etc.Im talking about issues, fixes, updates related to gnome 3 with opensuse. Not just opensuse with 2xgnome or kde.
I am having some problems getting the onboard sound card on my Intel DP45SG motherboard to work properly under openSuse 11.1. Yast appears to have detected the card as a 82801JI (ICH10 Family) HD Audio Controller, but I cannot get any sound out of the card at all.
I have tried to follow this thread, and have run the alsa-info script, the results of which are posted here. It appears to me that the codec that is listed in the alsa script, which is the IDT 92HD73E1X5, is not the same as that which is listed on Intel's site for this board, which is the IDT 92HD73E codec. Can anyone help me out with regards to getting this going? Additional info below:
after random chashes of openSUSE 11.3 x86_64 on my Acer Aspire 5720z I found a lot of messsages on the log
Code: mcelog: failed to prefill DIMM database from DMI data dmidecode seem ok for me Code: sharwyn:/var/log # dmidecode # dmidecode 2.10 SMBIOS 2.4 present.
I'm experiencing random lockups. There are 2 types.1st time this happened when I enabled Kwin compositing effects. The screen turned black and it froze, the mouse pointer froze. Nothing would move. 5 Minutes later I just hard reset the Laptop. I was afraid something could be corrupted as it was shutdown in a bad way. On boot up Kwin's compositing effects were in place.Randomly working on the laptop, everything will freeze except the mouse pointer. This happens like once in a while though.I have a feeling this has something to do with my Dell Studio 1555 Intel GM4500 MHD graphics.
I have 2 pc with Asus AMD boards (M4A87TD Evo and M4A88TD-M Evo) running OpenSuse 11.3.on both the front panel audio headset + mic do not work.on one PC I have an other OS also installed, so I know that on this machine the hardware is working.is there a chance to get the frontpanel audio connectors running with the actual openSuse or do I have to wait for the next version with a newer kernel/alsa version?
I successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
I want to dual boot openSUSE 11.2 and Windows 7. I already have Windows 7 installed but I have encountered multiple issues in the past with trying to make dual boots. Usually when I install Linux, GRUB decides it wants to go into world domination mode, and "breaks" my Windows installation. I have reason to believe this is because the distros I use come with legacy GRUB, (v0.97) and for some odd reason it lacks commands such as "update-grub" etc. This means I cannot add Windows 7 to the boot menu without going into extreme complications, which have NEVER, I repeat NEVER succeeded. When I boot the Windows drive directly, I get some error about GRUB not finding the device, and it puts me into a grub rescue command line. Now I am no expert in this field at all, but wouldn't that mean that GRUB wrote itself to the MBR of...oh I don't know, ALL of my hard drives? I really want to install openSUSE 11.2, but from bad experience I am really put off as I know that it ships with legacy GRUB v0.97.I am also running Fedora 13 at the moment, I have quite an experimental dual boot running..been trying to get GRUB 2 for hours now, it is definitely there but no commands work, "upgrade-grub-from-legacy" and "update-grub" return with command not found. I've heard this is just a bug but can anybody confirm that there will definitely be a way for me to "fix" my windows installation after it gets "broken" by GRUB?Second idea, unplug my windows hard drive while openSUSE installs?
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
right now, my machine runs ubuntu 10.10 due to work issue, i need to use windows server 2008 R2 (its a windows exclusive company) but i never used any of the active directory or anything from the windows server (only experience with windows is visual studio and those GAMES!), so i figure i need to practice a bit on my own b4 starting the job and just at the same time I found out as a univ student i get it for free! And plus, I am finding opensuse a better option for me than ubuntu So im wondering what i should do regarding these 2 systems here s some option
1). Install openSuse 11.4, and install VirtualBox and use windows server 2008 R2 on vbox 2). Install windows server 2008 R2 and then install openSuse alongside with it 3). Install windows server 2008 R2 and install openSuse in virtualBox
I have been using linux as my primary OS for more than a year now and I rlly need it for both school and my own entertainment. So wondering which option would best work out for me
wat are your opinions? PS: my machine is about 2 years ago a Dell laptop, with core 2 duo p8700 (2.53ghz) 4GB ram, and nvidia gfx, which even tho is still fast, but isnt rlly that snappy when it comes to virtualization even running xp in a virtual machine is quite laggy at times :S
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow: Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11) Processor: AMD Phenom X3 8450 Memory: 2GB Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers) OpenSUSE 11.4 KDE 4.6.0 Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
I've recently added a new hard disk and due to mother board controllers this new hard disk is known as sda.Before that my boot partition was /dev/sda3 and know this changed to sdb3.Whenever grub menu appears and I choose opensuse,it can't find /dev/sda3 .It seems that I should edit menu.lst or change boot loader parameter.something like root (hd1,2).But I don't how I can do this with opensuse boot loader.Though I could do this with CentOS easily.
I'm trying to diagnose a weird problem ... maybe someone has an idea where to start. I'm having a problem with flash videos. The video part displays as if the fast-forward button is being held down; audio sounds correct.
I'm thinking "synchronization error" (duh!) but I'm not sure how to start to diagnose the issue. I'm running OpenSUSE 11.4 x64, and the problem shows up in both chrome and opera.
Q: How can I allow my users to mount a cifs share without an entry in fstab in OpenSuse 11.4?
I have an answer myself. Until OpenSuse 11.2 I could mount my samba shares by making mount.cifs and umount.cifs setuid root. Today I installed OpenSuse 11.4. Unfortunately mount.cifs isn't anymore allowed to be setuid due to security concerns. Security is not an issue in my case, so I copied the mount.cifs and umount.cifs from 11.2 to make it work again:
1. Download cifs-mount-3.4.2-1.1.3.1.x86_64.rpm from this repository (I use 64 bit): "http://download.opensuse.org/distribution/11.2/repo/oss/suse/x86_64/" 2. Extract the files mount.cifs and umount.cifs from the rpm and copy them to /sbin 3. Make them setuid root:
Code: linux-y5qw:~ # chmod u+s /sbin/mount.cifs linux-y5qw:~ # chmod u+s /sbin/umount.cifs 4. Mount your cifs shares as a normal user:
I just purchased a Verizon USB 760 Modem.I purchased the Modem from Verizon because their web site stated that it supported all major OS including Linux.
My system specs are: HP Compaq 6715b Laptop
OS Information OS: Linux 2.6.25.20-0.4-default i686 Current user: jraglin@Jada System: openSUSE 11.0 (i586)
I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
