OpenSUSE :: Yelp 2.28 Broken By Xulrunner1.9.2
Sep 8, 2010
Since upgrading to opensuse 11.2 in May, I've not been able to install any programs that require xulrunner1.9.2, specifically firefox 3.6, without breaking yelp.
When I try to start yelp I get the error,
Unable to load page The requested URI "file:///fakefile#index" is invalid
If I try to view the help of any program that uses yelp it just hangs.
Up until now I've just run firefox 3.5, but since 3.6 is now a recommended update I have updated and once again yelp is broken.
I've tried every suggestion I could find on google, like reinstalling stuff, but the only fix so far is to remove xulrunner1.9.2 and downgrade or remove everything that depends on it. I also tried upgrading yelp to 2.30 but it just flicks open for a split second and closes.
View 1 Replies
ADVERTISEMENT
May 13, 2011
On 2 fresh updated 11.4 (32 and 64 bit).
Code:
# yelp
Could not initialize gecko!
# rpm -qa | grep mozilla
mozilla-xulrunner20-gnome-2.0.1-0.2.2.i586
mozilla-nss-devel-3.12.9-4.3.i586
[code]....
I'm not using the mozilla repo.
View 3 Replies
View Related
Dec 1, 2010
The rsync module "opensuse-full" which worked well so far seems currently broken. It tries to mirror a huge number of additional stuff (factory?) but fails with "permission denied". Any place where I could report this?Command:
Code:
rsync -rlpt -hi -stats rsync.opensuse.org::opensuse-full /drive/repo
Errors:
[code]....
View 5 Replies
View Related
May 21, 2010
i'm running debian lenny - latest stable i have recently installed smartcam (mobile phone as webcam over bluetooth) from .deb package , get errors of unmet dependency , but application works like a charm, unfortunately broken dependences block my aptitude , i cant fix them either as latest stable use older versions of dependences even in backports... how do i mark smartcam package as not broken and release my apt?
View 8 Replies
View Related
Dec 5, 2008
I just did a clean install of OpenSuSE 11.0 and performed all the available updates as well. After rebooting when I try to SSH into my SuSE workstation I get:
PuTTY Fatal Error
Server unexpectedly closed network connection
I don't see anything relevant in /var/log/messages. I've tried rebooting and restarting the SSHD service.
View 9 Replies
View Related
May 14, 2010
I loaded off DVD for Kgpg, but click on it and have the bouncing lock key, then disappears from menu bar. De-installed and Re-installed several times. Will not work properly.
Brand new installation, TODAY
View 3 Replies
View Related
Aug 23, 2009
A recent upgrade from 10.3 to 11.1 went remarkably well --however, Apache (integrated with osCommerce), was broken:
tall:~ # uname -a
Linux tall 2.6.27.29-0.1-default #1 SMP 2009-08-15 17:53:59 +0200 x86_64 x86_64 x86_64 GNU/Linux
[code]....
View 6 Replies
View Related
Apr 25, 2010
Firefox in openSUSE has a customized openSUSE toolbar menu. The hyperlink to openSUSE documentation is broken (HTTP 404). Please remove it; it is sufficient to visit the home page and to access the documentation from there.
View 2 Replies
View Related
Jul 11, 2010
Whenever I try to install an .rpm by double-clicking on it, a window comes up with this error:
'The name org.freedesktop.PackageKit was not provided by any .service files'
There is a file called org.freedesktop.PackageKit.service in /usr/share/dbus-1/system-services, so I know that it exists. Why can't dbus find it?
Running openSuSE 11.2 with GNOME.
View 2 Replies
View Related
Aug 9, 2010
My ASUS Eee PC 701's keyboard has some broken keys: 1,3,5,7,8,0,=,bkspc and tab do not function at all.Whilst I can just about make do as is, it would be nice to be able to press Ctrl+AltGr+'Q-P' for numbers or something.
View 4 Replies
View Related
Sep 3, 2010
Kde 4.5.1 from 03/09/2010 2100h. python-sip is 4.10.xxx and 4.11.xxx is neded to let things work
python-kde4 and python-kdebase4 wont install
nothing provide python-sip - 4.11 needed by python-kde4-4.5.1.168.1-x86_64
View 2 Replies
View Related
Dec 4, 2010
On my opensuse 11.2 pc, the Decmber 3rd KDE 4.5.4 update proceeded to install all updates except libkdecore4 (and maybe others). libkdecore4 now has a dependency on liblzma5 which is not available. The result is an all white desktop with boxes where the widgets should be.
I found this bug report: [url]
But I can't find liblzma5 in the repository that is listed in the 2nd posting.
Code:
opensuse 11.2 64Bit.
View 2 Replies
View Related
Dec 16, 2010
openSUSE 11.3 with GNOME. Every time I try to open up the trash, it gives me an "operation not supported" error, and starting nautilus from the terminal doesn't give me any output. I've tried removing the ~/.local/share/Trash and ~/.nautilus folders for both my main user and root and restarting nautilus, all to no avail.
Also, nothing in nautilus that starts with protocol:// works, like network or burn (or trash).
My only lead so far is that I messed up something in the glib runtime, since I've been working on a project that depends on a lot of GNOME and glib libraries, and have compiled a few from source. But since I can't find any sort of log from nautilus, I have no idea what the cause actually is.
View 7 Replies
View Related
Jan 9, 2011
i think something has broken javascript in my chromium installation. I've tried updating chromium and reinstalling/updating my java installation. Neither of these has helped. To give you an idea of the behavior I'm seeing this page does not have buttons, but pictures of all the buttons. Clicking them does nothing. Also, gmail's regular interface will not load. Functionality seems entirely normal (so far) in firefox.
View 4 Replies
View Related
Mar 24, 2011
This is a clean OpenSUSE 11.4 installation (the installation went flawless) I got the error while adding an https repo from the build service (though I *think* I mistyped the URL - plus the build service URL should be http) After restarting yast, everything went fine
I bet there's a segfault happening when trying to parse a broken repo (ie: broken download or even just a 404).
Code:
YaST got signal 11 at YCP file packager/repositories_include.ycp:188
/sbin/yast2: line 423: 2780 Segmentation fault $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
View 5 Replies
View Related
May 12, 2011
The traditional menu is broken in 11.4.Instead of a hierarchical menu:
Internet --> web browsers --> Firefox
konqueror
-> Email --> thunderbird
[code]....
View 9 Replies
View Related
May 18, 2011
I'm using KDE and after some update GStreamer seems to be broken. Firstly it was unable to play sound at all, and I've got around this by changing Phonon preferred engine to Xine. But Clementine is still unable to play with error message:
Clementine Error
GStreamer could not create the element: volume. Please make sure that you have installed all necessary GStreamer plugins (e.g. OGG and MP3)
I've already read this and this topic, but none of the things, proposed to try, worked for me.
View 9 Replies
View Related
Dec 20, 2010
Disk 1 of my software Linux-raid mirror failed but not before breaking my OpenSuSE 11.1 (KDE 3.5) domU. Dom0 is also 11.1 and is working fine. I have another domU running a Novell fileserver and I think that is OK too.
Both domU systems have dedicated mirrored partitions and it seems the OpenSuSE guest was sitting on some sectors which went bad. The drive is on its way back to Seagate for replacement under warranty and the rest of the system is plugging along on the remaining 750GB Disk 0.
I want to somehow repair SuSE 11.1. The symptoms are that I cannot VNC into it remotely and can only get in via the dom0 virtual manager in YAST. It won't let me use the partition manager via YAST. It also randomly drops the vnc connection with dom0. YAST won't let me manage software either.
Putting the original DVD in the drive and rebooting doesn't do anything for domU guests. It is only visible to dom0.
I don't want to blow the whole thing away and start again anyway.
Is there any way to do an online repair via the shell?
View 1 Replies
View Related
Nov 19, 2009
Since the upgrade I have not been able to get keyTouch to work. I have the KDE 4.3 desktop. I have xbindkeys and GTK2 installed. I have installed the KMix plugin. I can start keyTouch in system services, but it stops immediately. If I try to refresh I get /etc/init.d/keytouch-init status returned 1 (program is dead and /var/run pid file exists): I have no idea what that means.
View 6 Replies
View Related
Dec 10, 2009
I am having some trouble getting a VNC session to a new OpenSuse 11.2 32bit machine I have just installed.Fresh off the DVD, tried under KDE4 and Gnome with the same result (each time a fresh install).In YAST, I enabled remote administration, open the firewall ports, and then try and connect from remote client (in this case I have tried RealVNC from windows, and krdc from a Suse 10.x client and via HTTP) all result in the same blank black screen (http does get an X cursor echoed on the screen)
View 3 Replies
View Related
Feb 3, 2010
I had a power failure, now Gnome will not completly start and just hangs almost there. another member of the family was at the computer and when it restarted and something like TomBoy was flagged as no working and the question was asked if they wanted to delete reference or not , so they said yes now Gnome still will not finish loading. How do i repair from the console prompt?
View 9 Replies
View Related
Mar 20, 2010
I'm running Suse 11.2. Xemacs worked fine until I did a security update yesterday. Now, when I try to open a file, the file doesn't open and at the bottom of the window it says 'Loading this file requires xemacs, (null(function-max-args 'throw))'
View 9 Replies
View Related
Mar 12, 2011
After the update, the smb daemon will not start:
jarfx:/etc/init.d # ./smb start
Starting Samba SMB daemon [2011/03/12 09:04:08, 0] lib/fault.c:250(dump_core_setup)
Unable to setup corepath for smbd: Permission denied
[2011/03/12 09:04:08, 0] smbd/server.c:1134(main)
smbd version 3.5.7-1.17.1-2505-SUSE-SL11.4-x86_64 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/03/12 09:04:08.069212, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/03/12 09:04:08.070086, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/03/12 09:04:08.070189, 0] smbd/server.c:1234(main)
ERROR: smbd can not open secrets.tdb
View 9 Replies
View Related
Dec 10, 2010
Recently i add a lot of repositories for new apps but do0ing a zypper up after that left left many things broken ,first the my system has added 2 more entries in grub menu namely, opensuse 11.3 desktop-2.6.34.7 and opensuse 11.3 desktop-2.6.34.7-(failsafe) why are these added and now when I simply boot opensuse11.3 from menu though it starts but has no sound and typical errors shown .
Firefox is broken. how could I reach a stable state now I have these repos only code...
View 9 Replies
View Related
May 23, 2010
I'm having issues getting VLC to work again (openSuSE 11.2 GNOME). It used to work fine, but I think I broke its ability to use Qt when I was attempting to upgrade it and install some dev tools for something I wanted to try. When I run VLC, I get these errors:
[0x81b3090] main generic error: no dialogs provider module matched "any"
[0x806f758] skins2 interface error: no suitable dialogs provider found (hint: compile the qt4 plugin, and make sure it is loaded properly)
[0x806f758] skins2 interface: skin: subX author: Martin Poehlmann
From what I can tell, the Qt4 plugin is in the correct location (/usr/lib/vlc/gui/libqt4_plugin.so), so I'm not sure what's causing it to fail. As far as I can tell, it's some conflict among Qt packages between existing ones and ones that I tried to upgrade. Is there a way to get a list of all qt packages that come installed by default and their versions so I can attempt to revert back to it?
View 7 Replies
View Related
Mar 12, 2011
Did my 11.4 upgrade today, and so far things have been going pretty good, but I'm having a slight problem with my iPhone4 being "seen" correctly by my desktop environment, and I was hoping someone would be able to answer a question or two for me.
In the 11.4 RPM for usbmuxd, a udev rule is installed which controls the "mounting" and "unmounting" of the iOS device. The udev rule expects a certain username and group to be present, as it runs under that specfic username (but unfortunately the RPM doesn't create the username and group, and neither are created at install time). This prevents iOS devices from being seen correctly by programs like banshee, amarok, etc.
Logging in as 'root' and spawning the 'usbmuxd' process as root works fine, but it doesn't work so well for other non-root users.
Does anyone have any idea(s) as to what group, etc that the "usbmuxd" user should be in?
Once I get this working, I'd be happy to write up a FAQ for getting the iPhone working under openSUSE .. .this is something that has been hit or miss for me with OS (and has worked pretty well with some other distros)...
View 6 Replies
View Related
Jul 6, 2010
after I upgraded my SUSE 11.0 to 11.1 many problemes solved themselves. But now there is a new one.
I use openvpn, which always used to work without problems. After upgrading to SUSE 11.1 there is the error message:
"/etc/openvpn/client-suse.sh: line 7: modify_resolvconf: command not found
Wed Jul 7 00:11:38 2010 script failed: could not execute shell command"
The shell script is as follows:
Code:
#!/bin/sh
UPORDOWN=$1
DEV=$2
case $UPORDOWN in
up)
modify_resolvconf modify -s openvpn -p openvpn -t OpenVPN
[Code]....
View 4 Replies
View Related
Aug 10, 2010
Dell Precision Workstation running Suse 11.1 & KDE 3.5 as default O/S, with Suse 11.3 KDE4, Ubuntu 10.04 & Win XP Pro as secondary O/S's.Medion PC with Win XP Pro for those windows apps I have to use (against better judgement but because my clients require it!)
On Friday 6th I was having a play with Apache2 running on the Dell Precision on Suse 11.1. I have had a local development webserver for some time to test websites before uploading them a host server. I had wanted to test the DHCP & DNS functions for some time, and this seemed like a good opportunity. But I ran into some problems and decided to un-install the DHCP & DNS. I intended to install a VM and re-install the Apache server on it, to make it easier to troubleshoot.Unfortunately my internet connection on that box is now broken, but only with the Suse 11.1 install. The other 3 O/S's all work fine, and the rest of my machines are all good. In fact the Suse 11.1 install can communicate across the LAN, and print to both the network printers, it just won't connect to the Internet. Turning off the firewall doesn't do anything, and reconfiguring the NIC in YaST doesn't help.
I suspect that there is a config file somewhere with faulty info, but I can't find it. If searched everything that was changed on that date.I have been searching this forum, LinuxQuestions forums, and Googling for 2 days with no real success. I found some interesting threads which I thought would help but so far no luck. I can ping all the interfaces on my LAN, but anything outside is blocked. I thought it might be in the BT HomeHub but that works fine and all the boxes can connect except with the Precision running 11.1.
View 4 Replies
View Related
Mar 4, 2010
About a week ago, I installed all the updates that popped up. I didn't actually look at what was being installed.
Since then, most of the items in the Yast2 Control centre won't run and just pop up an error box with the following (Firewall):
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_S_construct NULL not valid
YaST got signal 6 at YCP file /usr/share/YaST2/clients/firewall.ycp:20
/sbin/yast2: line 440: 19436 Aborted $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
Xlib: extension "RANDR" missing on display "::ffff:127.0.0.1:11.0".
[Code]....
View 2 Replies
View Related
Jul 28, 2010
Since I upgraded to 11.3 I don't see that the View > Preview mode is broken. Image icons are created, but they all look like the icons in the picture below. When I move the zoom slider the largest sized icons come out fine. Anyone an idea how to solve this problem? Is there any repository that I can use to get more recent versions that should have fixed these bugs? I just noticed that PNG images come out right, so it could be something related to JPG files.
View 3 Replies
View Related
