On my opensuse 11.2 pc, the Decmber 3rd KDE 4.5.4 update proceeded to install all updates except libkdecore4 (and maybe others). libkdecore4 now has a dependency on liblzma5 which is not available. The result is an all white desktop with boxes where the widgets should be.
I found this bug report: [url]
But I can't find liblzma5 in the repository that is listed in the 2nd posting.
Code:
opensuse 11.2 64Bit.
The problem is that yum is refusing to install gcc on a new SL6 install. As far as I can make out, a security update that I applied prior to my attempt to install gcc has caused problems. I did a new SL6 install (x86_86) a couple of weeks ago. This was a minimal installation, and I didn't install any dev tools, as I intended to install them later from yum. Since then, I've done very little; I installed a few packages (samba, xemacs, etc), and I let the system update itself. The update installed 'kernel', and updated 'kernel-firmware' [URL]. I now need to install the dev tools (g++, and so on), but I can't. I've tried this from gpk-application, and directly from yum. The complete yum output is below, but the basic error is:
> Error: Package: glibc-2.12-1.7.el6.i686 (sl)
> Requires: glibc-common = 2.12-1.7.el6
> Installed: glibc-common-2.12-1.7.el6_0.5.x86_64 (@sl-security)
[code]....
i'm running debian lenny - latest stable i have recently installed smartcam (mobile phone as webcam over bluetooth) from .deb package , get errors of unmet dependency , but application works like a charm, unfortunately broken dependences block my aptitude , i cant fix them either as latest stable use older versions of dependences even in backports... how do i mark smartcam package as not broken and release my apt?
View 8 Replies View RelatedFor the past several days I have been getting a notice to update but then when I try to, get the following notice of a dependency problem:
I am running 11.4_64 with KDE 4.6.1 update. How do I clear this?
I get following error during automatic patch upgrade of my SuSE 11.2 to latest path revision. I assume it is due to the KDE 4.3.5 Update part of the patch set: compiz-kde4-0.7.8-9.14.x86_64 requires libkdecorations.so.4()(64 bit) but there are no providers. The package manager suggest to replace compiz-kde4-0.7.8-9.14.x86_64 with kwin-4.3.5-0.2.1.x86_64 but I don't want to loose compiz-kde. which repository I must add to resolve the dependency.
View 4 Replies View RelatedI have a broken dependency. The package is libsdl-image-1.2-dev. When I try to fix it via synaptic, it says E: libsdl-image1.2-dev: cannot remove `/.' What can I do?
View 3 Replies View RelatedI'm using KDE and after some update GStreamer seems to be broken. Firstly it was unable to play sound at all, and I've got around this by changing Phonon preferred engine to Xine. But Clementine is still unable to play with error message:
Clementine Error
GStreamer could not create the element: volume. Please make sure that you have installed all necessary GStreamer plugins (e.g. OGG and MP3)
I've already read this and this topic, but none of the things, proposed to try, worked for me.
[code]...
You could try using --skip-broken to work around the problem. You could try running: rpm -Va --nofiles --nodigest. how can I fix it?
I recently upgraded to Fedora 14 from F13 using Yum, it worked to my amazement except now yum appears to be broken because of a massive amount of dependency issues. It appears the old F13 packages are still around and yum is unable to get ride of them because their dependency with F14 packages of the same name. I tried yum distro-sync, and I tried yum resolvedep $(package-cleanup --orphans) --skip-broken but to no avail. Package--cleanup--orphans identifies all of the left over F13 packages.
I also can't install or upgrade anything using Yum, does give me a reason except the massive amount of dependency issues with the left over F13 packages. When I use the graphical software update it tells me among other things that Yum and RPM have updates but of course it won't update. I did follow the instructions and used yum update yum before I upgraded to F14, maybe it didn't take? Anyway to resolve this issue other than a clean install?
I'm running Suse 11.2. Xemacs worked fine until I did a security update yesterday. Now, when I try to open a file, the file doesn't open and at the bottom of the window it says 'Loading this file requires xemacs, (null(function-max-args 'throw))'
View 9 Replies View RelatedAfter the update, the smb daemon will not start:
jarfx:/etc/init.d # ./smb start
Starting Samba SMB daemon [2011/03/12 09:04:08, 0] lib/fault.c:250(dump_core_setup)
Unable to setup corepath for smbd: Permission denied
[2011/03/12 09:04:08, 0] smbd/server.c:1134(main)
smbd version 3.5.7-1.17.1-2505-SUSE-SL11.4-x86_64 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/03/12 09:04:08.069212, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/03/12 09:04:08.070086, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/03/12 09:04:08.070189, 0] smbd/server.c:1234(main)
ERROR: smbd can not open secrets.tdb
Recently i add a lot of repositories for new apps but do0ing a zypper up after that left left many things broken ,first the my system has added 2 more entries in grub menu namely, opensuse 11.3 desktop-2.6.34.7 and opensuse 11.3 desktop-2.6.34.7-(failsafe) why are these added and now when I simply boot opensuse11.3 from menu though it starts but has no sound and typical errors shown .
Firefox is broken. how could I reach a stable state now I have these repos only code...
About a week ago, I installed all the updates that popped up. I didn't actually look at what was being installed.
Since then, most of the items in the Yast2 Control centre won't run and just pop up an error box with the following (Firewall):
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_S_construct NULL not valid
YaST got signal 6 at YCP file /usr/share/YaST2/clients/firewall.ycp:20
/sbin/yast2: line 440: 19436 Aborted $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
Xlib: extension "RANDR" missing on display "::ffff:127.0.0.1:11.0".
[Code]....
I received an update yesterday and now my analog clock plasmoid is no longer functional. It's strange too because when I change a setting in the plasmoid, it'll magically come to life. I ran plasma-desktop in terminal to catch an error output, but nothing came up.
Useful info:
Running KDE 4.4.0 release 223
Opensuse 11.2
I was doing a kernel update and can no longer boot into 11.3. I am dual booting with XP. I get Grub screen but no longer see Suse as a boot option, only Windows. I have tried to reinstall, but for some reason I can't get it to boot with DVD. So, is there a way that I can repair my computer without doing a reinstall?
View 9 Replies View Relatedhow to update my system online (for example my firefox 3.0 to 3.5) but i can't figure out how this possibly works. I tried the "online update" using Yast2 but apparently (according to Yast) there is nothing at all to be patched on my system. I tried to click on the Firefox-3.5.5 rpm in the repository web-interface and open it using "install software" but the process aborts because of unresolved dependencies. Is there an easy way to update software without having to download/install every dependency manually?
View 1 Replies View Relatedbouncing icon and spinning icon in toolbar for 10-20 seconds, then nothing. Is there a special log file to be found for mozilla errors? (couldn't find anything useful in or near /var/log/messages or warnings all dependencies of associated programmes seem to fulfil dependencies, but obviously something isn't right. Does anyone else have the same problem?
[code]...
I started the upgrade to 10.4 from 9.10 through the update manager. It started the update to 10.4. After downloading almost 95% of the update, it gave an error message of "could not download certain components. downloaded files will not be erased" and stopped the update. I restarted the PC, and started the update manager again. But now it does not show any option of update to 10.4. how do I continue or resume the update process? I just started using ubuntu about 15 days back. So, I am relatively new to this.
View 3 Replies View RelatedFedora 12 2.6.32.9-67.fc12.i686I have tried doing the recommended as its saids at the bottom. However, that didn't work. So I have to yum upgrade --skip-brokenDoes anyone know how to solve this problem?
nss-3.12.6-1.2.fc12.i686 from updates has depsolving problems
--> Missing Dependency: nspr >= 4.8.4 is needed by package nss-3.12.6-1.2.fc12.i686 (updates)
nss-3.12.6-1.2.fc12.i686 from updates has depsolving problems
[code]....
Any clues as to how I got in this state? I allowed something like 100 updates this morning and these packages won't complete:
Code:
[root.bitwise: /home/sean]$ apt-get upgrade
Reading package lists... Done
Building dependency tree
[Code]...
I want to Upgrade my system from Fedora 10 to Fedora 11 but when I use: yum -y update, my system comes up with a lot of dependency errors for Fedora 12, Fedora 13, and Fedora 14.
Right now I just want to upgrade to Fedora 11 and dont understand how I have managed to download packages for Fedora 11, 12, 13 and 14.
I'm having some perl problems while using yum update... I recently upgraded to 5.3 and have the latest MailScanner.. I do not want to have to remove perl because it will remove a bunch of other things along with it.
[Code]....
im on mint 10 and when I run Update Manager i get this
Code:
W: GPG error: http://archive.canonical.com maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://security.ubuntu.com maverick-security Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
[code]....
This has been happening on my system the last few days.
$ cat /etc/fedora-release
Fedora release 11 (Leonidas)
$ uname -a
Linux kayvanxw8600.sanjose.ibm.com 2.6.29.6-213.fc11.x86_64 #1 SMP Tue Jul 7 21:02:57 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
[Code].....
I just recently updated my firefox and now I cannot find it anywhere. I have tried yum reinstall firefox and I get the following:
Code:
Loaded plugins: refresh-packagekit
Setting up Reinstall Process
Resolving Dependencies .....
I have tried the given commands and I can a reply of:
Code:
Setting up yum
Loaded plugins: refresh-packagekit
Reading local RPM database
Processing all local requires
Missing dependencies:
Package java-1.6.0-openjdk-plugin-1.6.0.0-25.b16.fc11.i586 requires libxul.so
Package firefox-3.5.2-2.fc11.i586 requires xulrunner >= 1.9.1.2
Package firefox-3.5.2-2.fc11.i586 requires libxul.so
Package xulrunner-1.9.1.2-1.fc11.i586 requires libxul.so
Package libproxy-mozjs-0.2.3-10.fc11.i586 requires gecko-libs >= 1.9.1
When I try to do the first update tells me "dependency resolution failed" and that I miss "librpm.so.0. I have Fedora 12.
View 5 Replies View RelatedI am running Fedora 12 64-bit on a MacBookPro5,1 system. After two weeks of not running Fedora on the system, I boot into it and check for updates with Yum Extender. It only finds a small handful of updates despite the fact that my other system running Fedora 12 32-bit has installed several update over the past two weeks. When I try to apply the available updates I get the following errors: Dependency Resolution Errors:
Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package kmod-wl-2.6.32.9-70.fc12.x86_64-5.60.48.36-1.fc12.3.x86_64 (rpmfusion-nonfree-updates)Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package 1:kmod-nvidia-2.6.32.9-70.fc12.x86_64-190.53-3.fc12.x86_64 (rpmfusion-nonfree-updates)Dependency Resolution Errors:
Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package 1:kmod-nvidia-2.6.32.9-70.fc12.x86_64-190.53-3.fc12.x86_64 (rpmfusion-nonfree-updates)Dependency Resolution Errors:
Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package kmod-wl-2.6.32.9-70.fc12.x86_64-5.60.48.36-1.fc12.3.x86_64 (rpmfusion-nonfree-updates)Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package 1:kmod-nvidia-2.6.32.9-70.fc12.x86_64-190.53-3.fc12.x86_64 (rpmfusion-nonfree-updates)
What is needed to resolve these update issues? Also, I suspect the system is not picking up all the updates that it should. What can I do to determine which updates the system should be getting?
I try to update my kde to kde 4.4.1 from updates repository but i get dependency resolution errors:
Code:
Dependency Resolution Errors:
I checked my system:
Code:
It means i have the newest versions. So how to update my kde?
When I try yum update, I get the following error:
abrt-1.0.8-2.fc12.i686 from updates has depsolving problems
--> Missing Dependency: librpm.so.0 is needed by package abrt-1.0.8-2.fc12.i686 (updates)
abrt-1.0.8-2.fc12.i686 from updates has depsolving problems
--> Missing Dependency: librpmio.so.0 is needed by package abrt-1.0.8-2.fc12.i686 (updates)
abrt-1.0.8-2.fc12.i686 from updates has depsolving problems
--> Missing Dependency: librpmio.so.0 is needed by package abrt-1.0.8-2.fc12.i686 (updates)
anaconda-14.2-1.fc14.i686 from rawhide has depsolving problems
--> Missing Dependency: fcoe-utils >= 1.0.12-2.20100323git is needed by package anaconda-14.2-1.fc14.i686 (rawhide)
abrt-1.0.8-2.fc12.i686 from updates has depsolving problems
--> Missing Dependency: librpm.so.0 is needed by package abrt-1.0.8-2.fc12.i686 (updates)
Error: Missing Dependency: librpmio.so.0 is needed by package abrt-1.0.8-2.fc12.i686 (updates)
Error: Missing Dependency: fcoe-utils >= 1.0.12-2.20100323git is needed by package anaconda-14.2-1.fc14.i686 (rawhide)
Error: Missing Dependency: librpm.so.0 is needed by package abrt-1.0.8-2.fc12.i686 (updates)
You could try using --skip-broken to work around the--
I have the following repositories in my /etc/yum.repos.d
fedora-rawhide.repo
fedora-updates-testing.repo rpmfusion-free-updates.repo
rpmfusion-nonfree.repo
fedora.repo
rpmfusion-free-rawhide.repo
rpmfusion-free-updates-testing.repo
rpmfusion-nonfree-updates.repo
fedora-updates.repo rpmfusion-free.repo
rpmfusion-nonfree-rawhide.repo
rpmfusion-nonfree-updates-testing.repo
I cannot update perl due to a missing dependency.
Installed perl:
[kbs1@localhost ~]$ rpm -qa | grep perl-5
perl-libwww-perl-5.834-1.fc13.noarch
perl-5.10.1-112.fc13.i686
perl-5.10.1-112.fc13.x86_64
[Code].....
downgrade also does not work. I just updated F12 to F13 using DVD and this occured. Also prevents me from doing "full" yum system update, these packages always fail. I do not understand the problem, it says that perl-libs 5.10.1-112 requires perl-libs 5.10.1-112, but I have that installed.