OpenSUSE Network :: Openvpn Broken After Upgrade To 11.1
Jul 6, 2010
after I upgraded my SUSE 11.0 to 11.1 many problemes solved themselves. But now there is a new one.
I use openvpn, which always used to work without problems. After upgrading to SUSE 11.1 there is the error message:
"/etc/openvpn/client-suse.sh: line 7: modify_resolvconf: command not found
Wed Jul 7 00:11:38 2010 script failed: could not execute shell command"
The shell script is as follows:
Code:
#!/bin/sh
UPORDOWN=$1
DEV=$2
case $UPORDOWN in
up)
modify_resolvconf modify -s openvpn -p openvpn -t OpenVPN
[Code]....
View 4 Replies
ADVERTISEMENT
Apr 5, 2010
i have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
View 1 Replies
View Related
Feb 22, 2010
We have installed "openVPN" from openSUSE 11.2 repo and "openVPN - webmin module" (GUI).What it needs to be done .. "Road Warriors" need to be able to access websites through openSUSE box sitting in the data center, from remote locations (hotel, coffe shops, wi-fi hot spots,..)We're half way there but it gets stucked somewhere with the IP's
View 6 Replies
View Related
Mar 2, 2010
I use KVpnc and openVPN to connect to my desktop at work from my laptop at home. This works fine, I can reach my desktop at the office from my laptop at home. The only problem is that when the Vpn connection is active I cannot use a browser on my laptop. In fact, I cannot connect to anything outside the office Vpn (like mail, chat etc).
I suspected it had something to do with the DNS servers at the office not being reachable from the Vpn so I added my "regular" DNS servers to the /etc/resolve.conf used when the Vpn is active, I added two lines in total on the form "nameserver <ip-address>". This did not solve the problem. I have searched the KVpn forums without finding anything, and the same goes for the openSUSE forums. Does anybody else experience the same problem?
View 1 Replies
View Related
Jul 13, 2010
I can't get my openvpn work if the firewall is on , and I also don't see any option to allow openvpn service in firewall allow service.
View 1 Replies
View Related
Aug 6, 2010
I have freshly installed OpenSUSE 11.3 64 bit and reimported my old openvpn connections via Network Manager. Connection can be established fine, but after 3 to 6 seconds (pings) it will stop to receive any packets on the tun device.
I tried disabling the firewall, starting openvpn manually, no avail. I checked the message log and the openvpn output, no messages recorded.
View 1 Replies
View Related
May 1, 2010
I was running Ubuntu 9.10 on my HP G70 laptop and did an upgrade using upgrade manager to Ubuntu 10.04.
Since I haven't been able to get wifi connection or wired working. The Network Manager applet is missing from the notification area and if I try to run nm-applet manually it says it is already running. I tried killing the process and then running it manually in the terminal and although the process appears to be running it is missing from the panel.
Booting into the live cd has the applet working fine so something in the upgrade process must have failed.
I tried changing the theme to see if it displays in other themes but had no luck.
I also tried to log into kde but kde seems to be broken. When I log into it after the splash screen all I get is a black screen with only my mouse pointer.
View 7 Replies
View Related
Feb 27, 2010
I have OpenVPN 2.0.8 installed configured to Ethernet Bridge BR0. All windows outside machines can "see" and mount remote inside firewalled machines (i.e. \machine1 or [URL]). However I can't access to inside windows machines with windows Remote Desktop
View 3 Replies
View Related
Mar 30, 2010
I did some reading on Openvpn and am following some instructions I found @ Install & Configure OpenVPN SSL VPN in SUSE & openSUSE Linux | SUSE & openSUSE
I keep getting the same error message when I run the . ./vars command
"NOTE: If you run ./clean-all, I will be doing a rm -rf on /etc/openvpn/easy-rsa/2.0/keys"
But when I run ../vars I get
"Bash: ../vars: Permission denied"
View 1 Replies
View Related
Nov 17, 2010
I have a remote network that I manage consisting of a DLink DFL-210 firewall/router, and behind that a Dell server running openSUSE 11.2 and a collection of Windows XP/Vista/7 computers.
The Linux box is running OpenVPN as a server (that is how I connect to this network) and a client (it connects to a second server - running XP - at a different location).
The DLink router is the DHCP server and provides addresses on the 192.168.51.0/24 network. The OpenVPN server provides the 10.8.51.0/24 address range.
The remote network that the Linux box connects to is 192.168.54.0/24 via the OpenVPN network 10.8.54.0/24.
I have added routes to the DLink router to route all traffic to the 10.8.51.0/24 and 192.168.54.0/24 networks to the Linux box.
With SUSEFirewall turned off, after I have connected via OpenVPN from my remote computer I can ping all active 192.168.51.0/24 addresses. Other computers on the 192.168.51.0/24 network can ping computers on the 192.168.54.0/24 network. But if I turn on SUSEFirewall, neither of these work. However, I can ping 10.8.54.1 from any computer on the 192.168.51.0/24 network.
How can I set up SUSEFirewall to allow these networks to communicate with eachother?
View 5 Replies
View Related
Aug 23, 2009
A recent upgrade from 10.3 to 11.1 went remarkably well --however, Apache (integrated with osCommerce), was broken:
tall:~ # uname -a
Linux tall 2.6.27.29-0.1-default #1 SMP 2009-08-15 17:53:59 +0200 x86_64 x86_64 x86_64 GNU/Linux
[code]....
View 6 Replies
View Related
Jul 23, 2010
I have an Epson Stylus Photo PX710W. It worked fine in opensuse 11.2, but I've now done a fresh install of opensuse 11.3 and I can't get the printer to work. I set it up as for 11.2, so I'm sure it should just work.
CUPS job page says:
stopped
"/opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper failed"
and CUPS error log says:
PID 1294 (/opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper) stopped with status 127!
While the scanner also isn't working, I think this is a separate issue as the CUPS log seems to suggest it is connecting to the printer, + I'm using network and usb connection.
View 2 Replies
View Related
Dec 4, 2009
I have updated using zypper from 11.1 to 11.2. Does this process update the boot/menu.lst file with an entry for the new kernel? Didn't for me.
Any rate, that's not really the problem. I have created a new entry in menu.lst to load the new kernel but I don't have a ramdisk image - all I have is a broken link initrd -> initrd-2.6.31.5-0.1-default
Where do I get the image from?
View 2 Replies
View Related
May 24, 2010
When I attempt to refresh my zypper repositories, I get messages like:
Repository 'gwdg_suse11.1' is invalid.
File /var/tmp/TmpFile.vRNflE doesn't contain public key data
I've asked for help (which has been freely given) on these forums before, but nothing has worked, and I've been stuck with this error for many months now. In effect, my system is effectively non-upgradable.
However, I would like to upgrade to 11.2. Is there an upgrade CD, or should I just download the 11.2 DVD (at nearly 5GB) and choose the "upgrade" option from it?
View 9 Replies
View Related
Aug 10, 2010
Dell Precision Workstation running Suse 11.1 & KDE 3.5 as default O/S, with Suse 11.3 KDE4, Ubuntu 10.04 & Win XP Pro as secondary O/S's.Medion PC with Win XP Pro for those windows apps I have to use (against better judgement but because my clients require it!)
On Friday 6th I was having a play with Apache2 running on the Dell Precision on Suse 11.1. I have had a local development webserver for some time to test websites before uploading them a host server. I had wanted to test the DHCP & DNS functions for some time, and this seemed like a good opportunity. But I ran into some problems and decided to un-install the DHCP & DNS. I intended to install a VM and re-install the Apache server on it, to make it easier to troubleshoot.Unfortunately my internet connection on that box is now broken, but only with the Suse 11.1 install. The other 3 O/S's all work fine, and the rest of my machines are all good. In fact the Suse 11.1 install can communicate across the LAN, and print to both the network printers, it just won't connect to the Internet. Turning off the firewall doesn't do anything, and reconfiguring the NIC in YaST doesn't help.
I suspect that there is a config file somewhere with faulty info, but I can't find it. If searched everything that was changed on that date.I have been searching this forum, LinuxQuestions forums, and Googling for 2 days with no real success. I found some interesting threads which I thought would help but so far no luck. I can ping all the interfaces on my LAN, but anything outside is blocked. I thought it might be in the BT HomeHub but that works fine and all the boxes can connect except with the Precision running 11.1.
View 4 Replies
View Related
Aug 3, 2010
I wished to use qinternet under openSUSE 11.3 to control multiple interfaces (a mixture of internet/intranet, DHCP/static IP), so I applied the same settings/tests which were successful for kinternet under open/SUSE 11.2: Selected options within Yast2/Network Settings: Traditional Method with ifupEnable Device Control for Non-root User Via QinternetYast2/System/System Services(RunLevel)/smpppd = "yes" From command line terminal:
[Code]....
Default state indicated by different icons. Interface option brought up by right-mouse-clicking on the qinternet/kinternet panel icon and choosing Settings/Various Settings/Startup tab. Note: Regardless of whether qinternet was running or not, internet communications via the relevant network interface still worked.
In case the failure of qinternet/smpppd was simply a PolicyKit issue, I edited /etc/PolicyKit/PolicyKit.conf to ensure that the relevant user had the necessary privilege to run smpppd (I assume that qinternet can be ignored since it is just the front end for smpppd) e.g.
[Code]....
This made no difference, SO FOR DIAGNOSTIC PURPOSES ONLY, I logged in as root after first removing the power from the network switches externally connected to each network interface (isolating the local host). I then ran qinternet but once again, the Interface option was greyed out. This confirmed fairly conclusively that lack of privilege was not responsible for the qinternet/smpppd problem.
View 5 Replies
View Related
Sep 16, 2010
This thread (nxserver now broken?) has inspired me to install FreeNX and the client from nomachine on openSUSE-11.2 (this is the version used on both, server and client machine). The good news is: basically it works. I can connect and get the desktop. However, I have some trouble with the keyboard. Up and Down arrow keys do not work. The up arrow triggers a screen snapshot. The down arrow key does nothing. I tried to connect using qtnx as well. This does not work. Result is:
[code]...
View 3 Replies
View Related
Feb 22, 2011
I run a dedicated opensuse 11.1 server with apache (2.2.10-2.9.1) installed. This box has been running for nearly 2 years hosting several low traffic websites. I must admit that I did not give lots of love/attention to the machine over that period. It ran rock solid. The different websites each have their own associated user account and are stored in their own /home/name/public_html/ folder. It was setup through Webmin. Each domain name is also linked to a unique IP (the box has multiple available IPs), however this is configured at my domain provider. All in all a very simple and straightforward setup that never let me down most of the past decade.
Recently the sites on the machine were no longer responding. This happens each other year or so since I write my logfiles to a separate partition. Was df -h and indeed, partition was full. Removed logfiles manually, and while I was at it I decided it was time to run an online update (yast2 / online update that is). Rebooted machine after yast telling me to do so. Sites are no longer working. Can no longer login to webmin. Only thing what works is the 'root' webpage (/srv/www/htdocs folder), which makes me rather clueless as the other sites are just not responding at all, not even a timeout or error message.While I know that deleting logfiles manually is quite stupid, I've done it fore and not really ended up in trouble.
Hence my questions: does this sound familiar to anyone and do you mind to give me a clue about where exactly I should start to look. It's been ages since I actually administrated apache, so I might overlook the obvious. Long story short: any tips are very welcome about what I should check first, what config files might have been changedith the update, etc ...
View 1 Replies
View Related
Jul 13, 2011
I have been trying to set up openVPN on a Virtual Machine running Ubuntu 10.04 with the eventual intention of having a closed VPN in the workspace I'm at, and a bridged internet connection out through the server.My initial process/instinct was to go through Webmin. After a fair bit of tooling around making eys/certificates, I was able to get a response (and that's all it was, really) from my windows machine accessing the VPN server. However, in my attempt to bridge the network, I have lost all internet/networking capabilities from the server.Fortunately I am able to access the server directly from the hardware underneath (i.e. I don't need to SSH in or anything), and so I've been attempting to restore the server's networking back to default. I have returned the /etc/network/interfaces file to it's original state (just the loop, and an eth0 on dhcp) and restarted the networking. A check with ifconfig returns what seems to be a working eth0, and the loop (noting else) however I am unable to ping any outside server. When I do, I am given the message:From XXX.XXX.XXX.XXX icmp_seq=1 Destination Host Unreachable(where of course XXX is my IP address).nother VM on the server is able to access the internet just fine, so it's not the overall server hardware...I guess at this point I'm just trying to take steps back,
View 1 Replies
View Related
Oct 27, 2010
I'm having a problem since my last upgrade from 11.2 to 11.3 (Gnome).
Before the upgrade NetworkManager would run just fine at start up, now I have to explicitly run the command from a console using the root user to start it.
(My problem is the same as this one, only in gnome instead of kde)
View 1 Replies
View Related
Sep 1, 2011
I was having a problem with a fresh 11.04 install and the VPN software I use for work. I found the fix was to upgrade the software, so I downloaded an RPM, converted it to .deb and installed it via dpkg. The install worked and the VPN software now works, but Package Manager says I have a broken package and wants to 'upgrade' to the older broken one. How can I fix this without breaking my VPN SW again?
View 1 Replies
View Related
Jul 29, 2010
I need to run a 2nd instance of openvpn on my server so that it can run on udp. The current one runs on tcp and I need to keep that running. Apparently, I need to create a 2nd tun network for it to use - how can I do that? I tried starting a 2nd instance of openvpn but it just seems to hang.
View 1 Replies
View Related
May 20, 2009
I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies
View Related
Nov 29, 2009
Does anyone know how to configure Fedora 12 to use netbios over an OpenVPN network
putting
hosts: files wins dns
into the nsswitch.conf file enable netbios over the LAN but not over the VPN.
View 4 Replies
View Related
Dec 29, 2010
May be there is an answer in some other topics but i'm sure which particular one is really the answer. The problem is the following. I've updated my OpenSuse 10.2 to 11.3 using this site and boot from DVD. But after I'd successfully completed the update I've not succeded to use Internet or local network more. Even I can't ping the gateway, I get just a message that network is unreachable. But I've set all IPs and the firewall is turned off. I already don't know what can I do to make the network working. As you see under Windows I have the Internet access ('cause I'm writing this message). And I had it before OpenSuse upgrade.
View 4 Replies
View Related
Jan 5, 2010
A couple of weeks ago I was using openvpn with a provider of PVNs on a home wifi network with no problems.I had installed openvpn using apt-get install and downloaded theopvn PVN files from the organization.erything worked fine.I would type sudo openvpn nameoffile.ovpn and then add my username and password during the installation process.However, when I try to do the same on an Ethernet network, the installation work fines (as above) and informs me that everything is connected (same as on the home Wifi network) but Firefox and all other software cannot connect to anything on the Internet.I contacted the organization who said the DNS was a problem and I needed to install resolvconf then modify each .opvn file using up /etc/openvpn/update-resolv-conf and down /etc/openvpn/update-resolv-confcauses the installation to hang because it does not like openvpn pointing to an external file.Irrespective of the problem I have with this "solution", previously I could use openvpn without modifying the .ovpn files. It just worked! I wonder if anyone knows why using the exact same configuration on an Ethernet network (which I have not used before with openvpn) is causing problems
View 4 Replies
View Related
Apr 28, 2011
I've seen this issue and it never seems to get resolved maybe this time I can find a fix.I'm currently using ubuntu 11.04 although i've had this issue since 10.04 and 10.10When using openvpn in windows it works perfectly fine but when using openvpn on ubuntu that's a completely different story I import my .ovpn file from clearos it loads the keys just fine but when it tries to connect it say's "no valid vpn secrets"
On clearos it gives you 3 certs and a .ovpn file the file sets it to use password with tls certs but it still comes up with this error, i've been quite stumped and it would be nice to possibly shed some light on this so I can finally get ubuntu to work with openvpn if possible.
View 3 Replies
View Related
Apr 14, 2010
I have a network that consists of a few desktop machines, laptops, and two Internet connected linux servers. The Linux servers are the gateways, routers, and firewalls for my desktop and laptop machines.Whenever I'm away from home; I can connect to my home machines over the Internet by first ssh'ng (technically I use Webmin; because my firewall on each Linux servers blocks ssh from the Internet.) to one of the linux servers and then ssh'ng to the desired machine on my home network.
This works fine for my home linux machines. But not my Windows machines.I'd like to be able to rdp or rdesktop to my Windows machines.Will OpenVPN allow me to accomplish this ?
View 14 Replies
View Related
Jan 20, 2011
i have Fedora 14 OS, i installed an openvpn, & i got a problem with it, which i get disconnected automatically after successfully logined, one of the members here (ZeroSignal ) told me to comment any lines in /etc/openvpn/anyname.conf file, which contain the word update-resolf.conf, & my problem get solved, but now after i logined to the openvpn network & after half an hour (or less sometimes) i got disconnected from the network.
View 3 Replies
View Related
Aug 9, 2010
i have installed openvpn and config it for a tunnel. my server.conf and client,conf is as follow:
server.conf
port 1194
proto udp
[code]...
View 1 Replies
View Related
