OpenSUSE Wireless :: Unable To Access University WLAN Network?
Nov 12, 2010
I'm unable to get into my university's WLAN network. LAN works just fine, but sometimes it's quite convenient to be able to access stuff wirelessly. It doesn't seem to be a hardware problem, because if I configure my computer according to our computer department's instructions it works fine with Ubuntu (currently I carry around a stick to get into the Internet when I really need it and don't have a cable). Some info:
My device:
Broadcom WLAN controller on a Lenovo G560
My system:
OpenSUSE 11.3 64-bit
The drivers are installed, I can get into normal private networks, but have never managed to get into the university network except for with Ubuntu.
The university instructions tell me to use the following settings:
Security: WPA Enterprise
Authentification: TTLS
Inner Authentification: PAP
Username: My username
Password: Password
CA Certificate: Deutsche_Telekom_Root_CA_2.pem
In the KDE instructions, they tell you to write "anonymous" into the anonymous identity field, but in the GNOME instructions it says to leave it blank. In Ubuntu, I leave it blank and it works.
I've got the recommended settings, which also work in GNOME.
I'd ask the tech support here, but I am the tech support We've got it working with other systems, like I said, but not with SUSE, and I'm a SUSE fan.
Brand new to the OpenSuse project. I'm have an old AMD Duron running 11.3 and I am having no luck in connecting to the www. I'm using a D-Link usb wireless adapter. I seem to have an IP address for the PC. here is the print from ifconfig:
recently ran into a problem with my internet access. Im using open suse 11.2 on a Dell Vostro 1520 laptop. I managed to get my wlan running and i can use firefox to access my router. In my router the laptop is also showing as connnected, dhcp reserved an ip for it.However if i try to browse the internet, no page is loading, actually no software that needs access to the web is working.
I just installed version 11.4 on my system of a toshiba satellite l505d-es5025 64bit.My wlan will not show up at all.I installed ndiswrapper, and all of the wlan from yast.
i installed suse (KDE) on my old notebook and now I'm trying to get the wlan to connect to our router and can't figure out how to get it to work. My card seems to work, the network manager even finds the router, but i just cant get a connection. I followed the steps of the "Getting Your Wireless to Work" thread and these are the results:
[Code]....
- i messed around a bit with the network settings and might have cluelessly broken something (or broken it more)
- i tried a usb-wlan-card as an alternative, which didn't work either, but could possibly have messed things up even more.
There is no wlan0 interface when trying to run FRITZ!WLAN USB Stick N 2.4 on OpenSuSE 11.2, though it works fine on Fedora 11 and Mandriva Spring 2009.1. All 64bit. Contrary to Fedora and Mandriva, there is no need to compile the compat-wireless module ar9170usb for OpenSuSE 11.2 because the kernel is very recent and includes this driver. Kernel: 2.6.31.5-0.1-desktop The /var/log/messages gives this after I put the stick in the PC. At first it is seen as a mass storage device:
Nov 27 22:00:24 linux-3mwa kernel: [ 73.420755] usb 1-5.1: new high speed USB device using ehci_hcd and address 4 Nov 27 22:00:24 linux-3mwa kernel: [ 73.540834] usb 1-5.1: New USB device found, idVendor=057c, idProduct=84ff Nov 27 22:00:24 linux-3mwa kernel: [ 73.540841] usb 1-5.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 Nov 27 22:00:24 linux-3mwa kernel: [ 73.540847] usb 1-5.1: Product: FRITZ!WLAN USB Stick N 2.4 [Code]....
I'm not able to connect to my university's internet facilities under openSUSE 11.4. I have been able to connect in the past and I am still able to connect in Windows 7.When I try to connect to the university WiFi, a valid IP address is assigned to me and the gateway address appears to be correct, so I don't see a problem in the DHCP negotations. Same with my university's Ethernet: I get a valid IP address, but I can't connect to the internet.When I browse to any site with Chromium/Chrome/ Firefox/lynx/curl, the page is stuck at "Sending request". I have tried disabling my firewall - that didn't solve anything.I don't know what else I can try and the campus' network administrators are puzzled. How can I resolve my issue?
My Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
I am unable to access wireless network from my notebook. My configuration is Dell i5, 4GB RAM and 1397 W-LAN and I have F13. I can still access Internet through Ethernet using a LAN cable but the network monitor doesn't show list of Wireless networks which my room mate's windows 7 machine easily detects. If anyone needs more info please provide me the steps to perform to find that out
System Information:openSUSE v11.2 32-bitdesktop: KDE 4.x (.3 I think)Background info: Installed openSUSE 11.2 on an old HP laptop this morning. I've been trying to set up my wireless connection since. After 2-ish hours of searchingupport forums, I managed to use network manager to connect to my home wireless network via WEP, I will say now that I've had lots of trouble.
I've finally been able to connect to my network, to a point. The NetworkManager in openSUSE says that the wireless connection is active. I can verify this by saying that on the other conputers in my house (winXP, win7, and Ubuntu v9) I have been able to ping this openSUSE computer and my router recognizes it as part of the network. Here is where the problem arises: I cannot access the internet from the openSUSE machine, with a domain name or by trying to type in an ip address, and I cannot ping other computers on my network with it.
abhishek:/ # sudo /usr/sbin/iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a Flags: bus master, fast devsel, latency 0, IRQ 23 Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
I recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.
I am using OpenSuse 11.3 and Network Manager is giving me a headache by not connecting to WEP based wi-fi network.It works in a wi-fi at my office while at my home, it shows / detects the network but keeps asking me over and over.
My wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:
[Code]...
I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.
I have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:
root's password: lo Interface doesn't support scanning. eth0 Interface doesn't support scanning.
I don't know what I did but I can't connect to the network any longer. KNetworkManager finds it but I can't connect. It stops at waiting for authorization. I've been connected before and it still works in xubuntu but something happened here. Here is what /var/log/messages/ says
Code:
Apr 1 20:06:27 linux-ec26 kernel: [ 2568.174423] wlan0: authenticate with AP 00:12:1e:b3:2b:02 Apr 1 20:06:27 linux-ec26 kernel: [ 2568.175913] wlan0: authenticated Apr 1 20:06:27 linux-ec26 kernel: [ 2568.175916] wlan0: associate with AP 00:12:1e:b3:2b:02
Today I changed my home router's security setting from WPA to WPA2, and my openSUSE 11.4 Tumbleweed system's network stopped working.It is very strange, because it can connect to the wireless no problem and it gets ip address and everything, but I cannot access any websites. I tried to revert the router setting back to WPA, but still the same.Funny thing is I can actually open the router admin page.
Even I plugged the wired lan cable to my laptop, but still the same. It connects, but no internet.Where should I look? My the other laptop with openSUSE 11.4 connects to the same router without any problem.
I have Ubuntu 10.04 installed and can browse the internet via cable, but wireless isnt working. My wireless driver is "Broadcom 802.11b/g WLAN".
In the windows device manager, I found the corresponding inf file to be oem20.inf which I tried to install it through "Setup Windows Driver" but it gave an error saying invalid driver. I also tried installing the Broadcom STA driver, but that didnot help.
I am dual booting with Windows 7, and i installed ubuntu through the windows wubi installer. My laptop is HP Pavilion dv4. I have installed the regular Ubuntu desktop and have made all upgrades. The results from lspci command i have added below.
gowda@ubuntu:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
If I have only 1 physical WLAN interface, is there some hackery that can be done so that it can be a client of an existing access point and at the same time also act as an access point for other clients? I have an existing 802.11g ADSL router, and I'm going to be building an HTPC which will have 802.11n. My laptop also has 802.11n, but at the moment it only connects at 54Mbps because thats what the AP supports. I'd like to be able to have the HTPC be a client of my ADSL router, but have my laptop be a client of the HTPC, so copying files to it will be faster.
I just installed Opensuse 11.2 dual-booting with Windows 7 on a laptop. I have the wireless set up and connected, but I can't seem to be able to connect to any websites or ping Google, etc.I'm kind of a Linux newbie, so I'd like to get some advise as to what I can check to get it working? (Windows 7 on the same machine is able to connect - I'm using it now)
- I've tried both automatic DHCP configuration and also setting the ip/dns server manually, no luck
I have just installed opensuse 11.3. I am absolutely new for Linux and for this forum. I have tried to open Network manager to configure my wlan. But its not starting. How to start network manager and configuring my wlan.
I'm using OpenSUSE 11.3 64-bit on a Lenovo G560. I'm able to establish both wired and unwired connections without problems. Now I'm in a situation where I'd like to share my laptop's internet connection with other devices. My thought was to establish an ad-hoc network that another computer could connect to wirelessly in order to get into the Internet, because I've only got one ethernet jack.
First thought was to use Network Manager, since that manages all my connections. A left click on the Network Manager icon brings up a menu in which "Wireless 802.11, Create network connection..." is an option. If I click on that I see a list of all the networks available in the area, as well as all the networks I've set up in the past. Below that are two options: "New Ad-Hoc Network" and "Connect To Other Network With Wireless 802.11..."
"New Ad-Hoc Network" seems like the right option, but when I double click on it the window closes and nothing happens. No error message, nothing. Network Manager continues to run and my connection is unchanged. If I just left click on it and then click "Connect" at the bottom of the window, the same thing happens.
I'm trying to setup a wireless AP with my old asus eeepc, so it can act as a repeater to connect my android device on the other end of the apartment. I've already created the Wireless Access Point using hostapd. It took very little configuring, just changed from mode 'a' to 'g' and changed the channel from 60 to 1 and It was all set. Next I setup a dhcp server. Also simple enough using yast.
Up to this point, I was able to connect my android device to the newly created wireless network. However It doesn't have internet access. I guess I have to configure iptables for this, but I find it incredibly confusing! Here are a few specs to help with any examples: The laptop is connected to the internet through eth0 with IP 192.168.2.120 Hostapd is using wlan0, and I'm pretty sure it created mon.wlan0 So, to sum up, when I connect my android device to the network I can, for instance, see what ever pages apache is currently serving on the laptop, but can't access the internet.
Am all of 2 days old on Opensuse 11.0 having just installed it on my old PC. All my experience has been with XP/Vista and Macs and it took some courage to finally try this out. My Belkin F5D9050 wireless(g+ MIMO) usb network card is recognised in yast but does not connect to the internet. On reading through forums I understand that this adaptor uses RAlinks RT73 chipset and support for should already be available in the OS. Is this correct ? If not, where do I get the driver for this and how do I install this. As per the Belkin site, Opensuse driver support isnt listed. Am struggling due to the unfamiliar environment and am not aware of terminal commands.
I have installed Suse 11.4 from the Gnome liveCD, and I "can" access my home network when it is unsecured, however, I can't access it when WEP is turned on. Now, I know that WEP is insecure but there are devices on the network that only supports WEP so the router settings can't be changed. Also just for testing purposes i have tried the WPA2 encryption method to no avail (dmesg reports that the connection timed out). The only encryption method that looks promising is the open-wep encryption. When trying to connect to the network (with open-wep turned on) I have performed a bit of checking to see what is going on, now I don't know much about in-depth linux and stuff but, below are the outputs from lsusb, dmesg, iwconfig, and ifconfig.
lsusb
Code: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 077b:2219 Linksys WUSB11 V2.6 802.11b Adapter dmesg
Just today I installed opensuse 11.3 on my Compaq CQ61. Even though I am able to connect to networks (both with an ethernet cable and wireless) I don't have internet access. I have used opensuse for a very brief period in the past and I had no such problem.
While it worked out of the box in 11.3, openSUSE 11.4 does not recognize my TP-Link TL-WN821N any more.
Googling a bit, apparently the old ar9170 driver is deprecated and supposedly a new driver carl9170 is integrated in the kernel now, but since it is not working this cannot be quite right.
Unfortunately, I do not understand much of the instructions given at the above two URLs: Should I try to install the old ar9170 driver? If so, I found older, pre-11.4 posts here that seem to indicate that is not so simple as just copying a firmware file somewhere, so how can I install it in openSUSE 11.4? Or should I rather try getting the new carl9170 to work? If so, how can I do this if it is already supposed to be part of the kernel?
The 11.3 Net-Install (from CD) recognised that USB-WLAN-Stick all by itself, installing 11.3 just fine through the air. With 11.4 it didn't work. So I borrowed a WLAN bridge for a couple of days and installed 11.4 now (32bit plain install plus Packman), but even after the install, plugging in that Stick does not do anything.
I did a fresh install,I also enable the networkmanager.after installation,my wireless unable to connect to my router . when I click to connect , it prompt for password then after that nothing happen.
I finally installed openSUSE along side ubuntu and xp in my ThinkPad EDGENow I am facing issue with toggling the wi-fi, I had no such problem in ubuntu.Seems like there is some issue in the thinkpad-acpi module.I use fn+F9 to toggle the wifi, which toggles both bluetooh and wifi, but on openSUSE it only toggles bluetooth.acpi_listen in ubuntu gives me the below result when I press fn+F9ibm/hotkey HKEY 00000080 00001005but in openSUSE its blank but bluetooth gets toggled. dmesg from ubuntu:
