OpenSUSE Network :: Wireless Connection Can't Access Websites
Mar 7, 2010
I just installed Opensuse 11.2 dual-booting with Windows 7 on a laptop. I have the wireless set up and connected, but I can't seem to be able to connect to any websites or ping Google, etc.I'm kind of a Linux newbie, so I'd like to get some advise as to what I can check to get it working? (Windows 7 on the same machine is able to connect - I'm using it now)
- I've tried both automatic DHCP configuration and also setting the ip/dns server manually, no luck
View 4 Replies
ADVERTISEMENT
Jan 22, 2011
I've just installed openSUSE 11.3 for the first time on a Dell E1505 notebook and am having problems connecting to my home wireless network. Using the Network Manager I've been able to find my home network and connect after entering the network password. After a minute or two the wireless network is still shown as active but their is no connection (websites will not load).
I'm completely new to Linux so I have almost no clue what could be causing this. I have tried connecting the notebook hardwired (Ethernet) to the router and get a perfect connection if that information helps any.
View 3 Replies
View Related
Jan 10, 2010
I have seen some similar issues here in the forum but I am not sure if they are related.I post seperately to avoid confusion there. However, I have installed Suse 11.2 on my Asus netbook. Network with cabel is ok, but as soon as I unplug, internet does not work.I have a fritz box. ping fritz.box does NOT work ping 192.168.178.1 does work. internet does not work.
ok, next the info in the system tray:
everything looks fine.
Status: connected
Nameserver is 192.168.178.1.
Seems about right.
Domain: fritz.box
[Code]...
View 1 Replies
View Related
Aug 28, 2010
I am in the process of setting up my own Linux gateway/firewall using two nics eth0(external network) and eth1(internal network). The Linux gateway hands out ip addresses using dhcp3-server, and uses iptables to route the traffic correctly. Clients are able to connect and access the internet...everything is working great, HOWEVER I can't access my apache virtual hosts websites from the internal network? They work just fine if i access them from the outside world
I can type ip of the web server, 192.168.0.201 and it shows the first virtual host listed in my /sites-enables/000-default folder. but i can't use any DNS entries. I don't have any internal DNS servers running. This doesn't makes sense, because if i replace the linux firewall/router with my normal linksys wrt54G router it works just fine.
View 4 Replies
View Related
Apr 23, 2011
I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies
View Related
Jun 17, 2010
System Information:openSUSE v11.2 32-bitdesktop: KDE 4.x (.3 I think)Background info: Installed openSUSE 11.2 on an old HP laptop this morning. I've been trying to set up my wireless connection since. After 2-ish hours of searchingupport forums, I managed to use network manager to connect to my home wireless network via WEP, I will say now that I've had lots of trouble.
I've finally been able to connect to my network, to a point. The NetworkManager in openSUSE says that the wireless connection is active. I can verify this by saying that on the other conputers in my house (winXP, win7, and Ubuntu v9) I have been able to ping this openSUSE computer and my router recognizes it as part of the network. Here is where the problem arises: I cannot access the internet from the openSUSE machine, with a domain name or by trying to type in an ip address, and I cannot ping other computers on my network with it.
View 9 Replies
View Related
Dec 20, 2010
im having a problem setting ad hoc wireless network between two opensuse boxes, using network manager, every time im about to smash the box, maybe im doing something wrong in the steps or something idk
how to set up ad hoc connectionl
note: im a linux rookie
View 3 Replies
View Related
Mar 9, 2011
I have installed opensuse 11.3. I am unable to connect to my wireless connection. KNetworkManager finds the connection (when I scan for connections), I can enter the WEP Hex key, it says it is configured. Goes through its "check list" when you click "ok", and all seems good. But it won't connect. When I run "nm-tool" I get:
State: unknown
WARNING **: error: could not connect to NetworkManager
Just ridiculous, brand new, up to date OS, and its this difficult to connect to a wireless router!
View 1 Replies
View Related
Jan 15, 2010
I've installed opensuse 11.2 on an old IBM thinkpad. The install went without a hitch and when I got to the desktop I inserted my Dlink DWL-G132 wireless USB adapter. Opensuse immediately recognised that a wireless device was attached and I could see my wireless network listed. I entered my WPA password and was able to connect to my routers configuration page by entering 192.168.0.1 in the URL bar of firefox. For some reason I am unable to navigate to any webpage. When I enter a URL firefox acts as though there is no internet connection. The only way I can get the internet on my laptop is to connect it to my router with a cable. I used a wired connection and ran the update utility thinking that perhaps an update would fix the issue but it did not. I know the adapter works because the laptop used to have windows xp installed and I could connect fine with that.
Does anyone here have any idea why I would be able to connect wirelessly to the routers configuration page but not to the internet? I appreciate any advice anyone may have.
View 9 Replies
View Related
Mar 6, 2010
I have been running SUSE 11.1 on my HP laptop for over a year. For the most part, I am thrilled with it. However, when I awaken the computer from hibernation mode, I have to go into the Network Settings applet proceed with the wizard in order to get my wireless connection working.
Another irritating aspect is that if I go to a place with a Wireless Hotspot, the computer doesn't automatically pick it up. Again, I have to go through the Network Settings applet to get it working.
I want this to work as it does on Windows XP/Vista where I can put the computer to sleep and when I awaken it, then the wireless connection is automatically there for me, etc.
I have to think I probably need to tweak a setting somewhere, so if someone can tell me where to do this, great!
I am using an internal wireless card (Atheros AR928X PCI-EXPRESS). If you need additional info, let me know.
View 3 Replies
View Related
Apr 1, 2010
I don't know what I did but I can't connect to the network any longer. KNetworkManager finds it but I can't connect. It stops at waiting for authorization. I've been connected before and it still works in xubuntu but something happened here. Here is what /var/log/messages/ says
Code:
Apr 1 20:06:27 linux-ec26 kernel: [ 2568.174423] wlan0: authenticate with AP 00:12:1e:b3:2b:02
Apr 1 20:06:27 linux-ec26 kernel: [ 2568.175913] wlan0: authenticated
Apr 1 20:06:27 linux-ec26 kernel: [ 2568.175916] wlan0: associate with AP 00:12:1e:b3:2b:02
[code]....
View 3 Replies
View Related
May 25, 2011
Today I changed my home router's security setting from WPA to WPA2, and my openSUSE 11.4 Tumbleweed system's network stopped working.It is very strange, because it can connect to the wireless no problem and it gets ip address and everything, but I cannot access any websites. I tried to revert the router setting back to WPA, but still the same.Funny thing is I can actually open the router admin page.
Even I plugged the wired lan cable to my laptop, but still the same. It connects, but no internet.Where should I look? My the other laptop with openSUSE 11.4 connects to the same router without any problem.
View 3 Replies
View Related
Mar 11, 2011
I have just done a new install of the latest opensuse 32bit and for some reason I cannot connect to the internet, when I click on mange connections the vpn tag is highlighted and all the other tabs are grayed out and I cannot select them. So I can't setup a internet connection wired or wireless. I was just using Kubuntu and did not have this problem. My card is broadcom.
View 9 Replies
View Related
Sep 26, 2010
Having just installed OpenSuse 11.3, NetworkManager identifies my wireless network, but repeatedly fails to make a connection. Without further ado, here are the outputs to commands requested in the first sticky thread:
[Code]....
View 7 Replies
View Related
Apr 23, 2011
I think I've read every post here about the Broadcom and connection.I thought I tried everything.Turns out (read Chapter�35.�Using NetworkManager) using Connection Manager (K Network Manager) you can not use, what I wanted to use, 'all users, use connection' or said another way, the wifi would be activated and connected Before the user 'logs in'. Well, as I said, it turns out that if you are using gnome, this will work with NetMgr, but NOT in KDE. If you want to use 'system connect' then you have to use 'traditional' if in YaST2. Oh well, at least 'i'm' connected.... (i'm the only user, so not a big deal right now, but would like to get it working...)
View 2 Replies
View Related
Oct 2, 2010
I installed 10.3 (after buying it a couple of years ago and letting sit on the shelf) and can't get it to configure my ethernet connection or my wireless card. Yast doesn't include a list of available cards, and the error I get in installation-network setup is that the kernel isn't present. The machine I'm installing this on is a Lenovo, in which there isn't a discrete ethernet card (it's in the motherboard), but my wireless card (a Cisco LINKSYS 802.11G) is a discrete card. Because I'm divorcing Microsoft for a number of valid reasons, I don't have Windows available on that box.
View 4 Replies
View Related
Feb 24, 2010
I have an open WEP wireless internet connection with a security key. KNetworkManager can never obtain an IP address from my wireless router, but I know that the router works because Windows can connect correctly and Ubuntu's NetworkManager can connection correctly. Does anyone know what is happening? KNetworkManager just asks for my security again and again and again after it fails to connect.
View 8 Replies
View Related
Jul 25, 2011
I have a wireless cable modem/router and a PCI-E 1x wireless card in my desktop PC. It works perfectly until I connect my Ethernet cable to my local router and printer, no more internet connection. I am guessing there is a setting somewhere that tells the networking software that the hard wire connection is the primary internet gateway. How do I tell it to use the wireless as the primary gateway?
View 4 Replies
View Related
Aug 7, 2011
I'm trying to setup a wireless AP with my old asus eeepc, so it can act as a repeater to connect my android device on the other end of the apartment. I've already created the Wireless Access Point using hostapd. It took very little configuring, just changed from mode 'a' to 'g' and changed the channel from 60 to 1 and It was all set. Next I setup a dhcp server. Also simple enough using yast.
Up to this point, I was able to connect my android device to the newly created wireless network. However It doesn't have internet access. I guess I have to configure iptables for this, but I find it incredibly confusing! Here are a few specs to help with any examples: The laptop is connected to the internet through eth0 with IP 192.168.2.120 Hostapd is using wlan0, and I'm pretty sure it created mon.wlan0 So, to sum up, when I connect my android device to the network I can, for instance, see what ever pages apache is currently serving on the laptop, but can't access the internet.
View 1 Replies
View Related
Nov 12, 2010
I'm unable to get into my university's WLAN network. LAN works just fine, but sometimes it's quite convenient to be able to access stuff wirelessly. It doesn't seem to be a hardware problem, because if I configure my computer according to our computer department's instructions it works fine with Ubuntu (currently I carry around a stick to get into the Internet when I really need it and don't have a cable). Some info:
My device:
Broadcom WLAN controller on a Lenovo G560
My system:
OpenSUSE 11.3 64-bit
The drivers are installed, I can get into normal private networks, but have never managed to get into the university network except for with Ubuntu.
The university instructions tell me to use the following settings:
Security: WPA Enterprise
Authentification: TTLS
Inner Authentification: PAP
Username: My username
Password: Password
CA Certificate: Deutsche_Telekom_Root_CA_2.pem
In the KDE instructions, they tell you to write "anonymous" into the anonymous identity field, but in the GNOME instructions it says to leave it blank. In Ubuntu, I leave it blank and it works.
I've got the recommended settings, which also work in GNOME.
I'd ask the tech support here, but I am the tech support We've got it working with other systems, like I said, but not with SUSE, and I'm a SUSE fan.
View 9 Replies
View Related
Aug 9, 2011
I have installed Suse 11.4 from the Gnome liveCD, and I "can" access my home network when it is unsecured, however, I can't access it when WEP is turned on. Now, I know that WEP is insecure but there are devices on the network that only supports WEP so the router settings can't be changed. Also just for testing purposes i have tried the WPA2 encryption method to no avail (dmesg reports that the connection timed out). The only encryption method that looks promising is the open-wep encryption. When trying to connect to the network (with open-wep turned on) I have performed a bit of checking to see what is going on, now I don't know much about in-depth linux and stuff but, below are the outputs from lsusb, dmesg, iwconfig, and ifconfig.
lsusb
Code:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 077b:2219 Linksys WUSB11 V2.6 802.11b Adapter
dmesg
[Code]....
View 9 Replies
View Related
Mar 2, 2011
Just today I installed opensuse 11.3 on my Compaq CQ61. Even though I am able to connect to networks (both with an ethernet cable and wireless) I don't have internet access. I have used opensuse for a very brief period in the past and I had no such problem.
View 3 Replies
View Related
Jun 7, 2009
I have installed Bind DNS server in Opensuse 11.1 and it was running fine for two weeks. However starting last week it was unable to resolve a lot of internet sites (e.g. opensuse.org). I can say it is working partiallyI tried restart the named service and it worked fine for only about 15 minutes and back to partial condition.All the records in zone files can be resolved. Only some internet websites not able to resolve. The same sites can be resolve with another dns server internally
View 2 Replies
View Related
Sep 28, 2010
A good deal of text on web pages are missing; also, the links are usually coming up not as text but, rather, as lines. I've 11.3 installed.EDIT: Ignore the below -- it seems that the server was just slow, is all.(I would have queried this via the listserve, but <opensuse+subscribe@opensuse.org> is not recognized by the mail server.)
View 1 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Apr 3, 2010
I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies
View Related
Jul 2, 2010
During the installation of Opensuse 11.2, I tried the wireless internet connection, and it kept coming back failed.I continued to install the system and when I got on, I entered the SSID (think that's the right way to say it), and the password.When showing that 'map' or whatever, it showed the SSID in the networkmanager.It also said "active".But when clicking on Mozilla Firefox, nothing happened. It just said the server is down.I'm on another Linux system now; so I know the wireless works. It worked great on a third one as well.It is some Atheros Communications, AR5001.I'm not sure what other information you need. Just let me know and I will do what I can to provide. I don't have opensuse up at the moment. I screwed up the dual boot. so right now it's been erased. I'll ask for help on that in another topic.
View 9 Replies
View Related
Dec 10, 2010
I want to try to get wireless access to the wifi router with the xbox360 wireless network adapter.Is this possible?
View 1 Replies
View Related
Sep 11, 2011
Debian 2.6.32-5-amd64 KDE I have to make one of my computers wireless. i need some product recommendations for a wireless access point & a wireless network card.
View 4 Replies
View Related
Mar 23, 2010
When i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies
View Related
