OpenSUSE Wireless :: Can't Access The Network Any Longer
Apr 1, 2010
I don't know what I did but I can't connect to the network any longer. KNetworkManager finds it but I can't connect. It stops at waiting for authorization. I've been connected before and it still works in xubuntu but something happened here. Here is what /var/log/messages/ says
Code:
Apr 1 20:06:27 linux-ec26 kernel: [ 2568.174423] wlan0: authenticate with AP 00:12:1e:b3:2b:02
Apr 1 20:06:27 linux-ec26 kernel: [ 2568.175913] wlan0: authenticated
Apr 1 20:06:27 linux-ec26 kernel: [ 2568.175916] wlan0: associate with AP 00:12:1e:b3:2b:02
[code]....
View 3 Replies
ADVERTISEMENT
Apr 13, 2010
I have a samba server on my LAN. It can be accessed without any problems from Windows machines on the LAN without password. I have two computers that I have updated to OpenSuse 11.2 (both used to run 10.3). Since doing this upgrade I can no longer access the samba share from the Suse machines. Basically, both Dolphin and Konqueror ask for a username and password to access "avoca" (the workgroup).
View 9 Replies
View Related
Jun 17, 2010
System Information:openSUSE v11.2 32-bitdesktop: KDE 4.x (.3 I think)Background info: Installed openSUSE 11.2 on an old HP laptop this morning. I've been trying to set up my wireless connection since. After 2-ish hours of searchingupport forums, I managed to use network manager to connect to my home wireless network via WEP, I will say now that I've had lots of trouble.
I've finally been able to connect to my network, to a point. The NetworkManager in openSUSE says that the wireless connection is active. I can verify this by saying that on the other conputers in my house (winXP, win7, and Ubuntu v9) I have been able to ping this openSUSE computer and my router recognizes it as part of the network. Here is where the problem arises: I cannot access the internet from the openSUSE machine, with a domain name or by trying to type in an ip address, and I cannot ping other computers on my network with it.
View 9 Replies
View Related
May 25, 2011
Today I changed my home router's security setting from WPA to WPA2, and my openSUSE 11.4 Tumbleweed system's network stopped working.It is very strange, because it can connect to the wireless no problem and it gets ip address and everything, but I cannot access any websites. I tried to revert the router setting back to WPA, but still the same.Funny thing is I can actually open the router admin page.
Even I plugged the wired lan cable to my laptop, but still the same. It connects, but no internet.Where should I look? My the other laptop with openSUSE 11.4 connects to the same router without any problem.
View 3 Replies
View Related
Jun 17, 2011
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies
View Related
Mar 7, 2010
I just installed Opensuse 11.2 dual-booting with Windows 7 on a laptop. I have the wireless set up and connected, but I can't seem to be able to connect to any websites or ping Google, etc.I'm kind of a Linux newbie, so I'd like to get some advise as to what I can check to get it working? (Windows 7 on the same machine is able to connect - I'm using it now)
- I've tried both automatic DHCP configuration and also setting the ip/dns server manually, no luck
View 4 Replies
View Related
Aug 7, 2011
I'm trying to setup a wireless AP with my old asus eeepc, so it can act as a repeater to connect my android device on the other end of the apartment. I've already created the Wireless Access Point using hostapd. It took very little configuring, just changed from mode 'a' to 'g' and changed the channel from 60 to 1 and It was all set. Next I setup a dhcp server. Also simple enough using yast.
Up to this point, I was able to connect my android device to the newly created wireless network. However It doesn't have internet access. I guess I have to configure iptables for this, but I find it incredibly confusing! Here are a few specs to help with any examples: The laptop is connected to the internet through eth0 with IP 192.168.2.120 Hostapd is using wlan0, and I'm pretty sure it created mon.wlan0 So, to sum up, when I connect my android device to the network I can, for instance, see what ever pages apache is currently serving on the laptop, but can't access the internet.
View 1 Replies
View Related
Nov 12, 2010
I'm unable to get into my university's WLAN network. LAN works just fine, but sometimes it's quite convenient to be able to access stuff wirelessly. It doesn't seem to be a hardware problem, because if I configure my computer according to our computer department's instructions it works fine with Ubuntu (currently I carry around a stick to get into the Internet when I really need it and don't have a cable). Some info:
My device:
Broadcom WLAN controller on a Lenovo G560
My system:
OpenSUSE 11.3 64-bit
The drivers are installed, I can get into normal private networks, but have never managed to get into the university network except for with Ubuntu.
The university instructions tell me to use the following settings:
Security: WPA Enterprise
Authentification: TTLS
Inner Authentification: PAP
Username: My username
Password: Password
CA Certificate: Deutsche_Telekom_Root_CA_2.pem
In the KDE instructions, they tell you to write "anonymous" into the anonymous identity field, but in the GNOME instructions it says to leave it blank. In Ubuntu, I leave it blank and it works.
I've got the recommended settings, which also work in GNOME.
I'd ask the tech support here, but I am the tech support We've got it working with other systems, like I said, but not with SUSE, and I'm a SUSE fan.
View 9 Replies
View Related
Aug 9, 2011
I have installed Suse 11.4 from the Gnome liveCD, and I "can" access my home network when it is unsecured, however, I can't access it when WEP is turned on. Now, I know that WEP is insecure but there are devices on the network that only supports WEP so the router settings can't be changed. Also just for testing purposes i have tried the WPA2 encryption method to no avail (dmesg reports that the connection timed out). The only encryption method that looks promising is the open-wep encryption. When trying to connect to the network (with open-wep turned on) I have performed a bit of checking to see what is going on, now I don't know much about in-depth linux and stuff but, below are the outputs from lsusb, dmesg, iwconfig, and ifconfig.
lsusb
Code:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 077b:2219 Linksys WUSB11 V2.6 802.11b Adapter
dmesg
[Code]....
View 9 Replies
View Related
Mar 2, 2011
Just today I installed opensuse 11.3 on my Compaq CQ61. Even though I am able to connect to networks (both with an ethernet cable and wireless) I don't have internet access. I have used opensuse for a very brief period in the past and I had no such problem.
View 3 Replies
View Related
Mar 14, 2011
I had the Wireless Broadband working. It stopped working after I closed the laptop (suspend). Also the wifi will not connect until reboot. Now the entry for the Wireless Broadband is gone, and the tab for it is greyed out as well.I would be happy to submit this as a bug and assist with the debugging process.
View 2 Replies
View Related
Oct 8, 2010
I am experiencing a bunch of problems on my Ubuntu 10.10. I will start off saying that I am a new user to the Ubuntu and Linux. I've been a user for 5 days. Anyways, I started off with Ubuntu 10.4. When using that, I could instantly connect to my wireless router and my school's wireless network. But after I upgraded to 10.10, I could no longer connect to a wireless network. Second problem is my webcam. The video works, but it won't recognise my microphone.
View 1 Replies
View Related
Jun 17, 2011
I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network.My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter.
View 3 Replies
View Related
Aug 19, 2010
It still works fine if I boot into "good old" Windows. I must say I am SOOO disapointed with the Network Manager in Ubuntu which was great until 10.4 and has been crap ever since. I have had so many problems with my Vodafone USB and had to find an alternative method of getting it to work. Now the last straw is that my wireless LAN card is not getting recognised on startup so I have not connectivity when at home. (USb via Vodafone is no good in my area). I am typing this via an old Windows PC because my Ubuntu just does not work anymore. I have not installed anything new so what has happened - or how can I get it to work again.
I was completely sold on Ubuntu but am now considering reverting to Windows. It would be worth paying for an operating system that actually works, even if I have all the other hassles as well. A year ago Ubuntu was great - it all worked ! Not any more how can all that good work have gone down the pan - I can't understand how anyone could let all these nertwork problems occur - it isn't just me - read the threads - it's widespread.
View 4 Replies
View Related
Apr 17, 2011
I upgraded from lenny to squeeze on a notebook and I can no longer connect to the wireless network. The computer is an LG notebook and the network card is ralink rt2860. I am using Gnome and NetworkManager. The wireless key is WEP hex. It was working fine with lenny till before the upgrade. After the upgrade, the network card stopped working. So, I checked
$ lspci|grep Network
08:00.0 Network controller: RaLink RT2860
Then I reinstalled the driver with apt-get install firmware-ralink wireless-tools Then the network manager tray started working again and saw the network, but cannot connect. It was trying to connect but timed out and kept asking for the password. It is the correct password. I tried deleting the old connection and recreated a new one in the nm. But still does not work.
[Code]...
View 7 Replies
View Related
Dec 10, 2010
I want to try to get wireless access to the wifi router with the xbox360 wireless network adapter.Is this possible?
View 1 Replies
View Related
Aug 26, 2011
I've had everything but /boot on LVM LUKS encryption since I installed 11.4 on my netbook. Suddenly it won't accept my password and boot. Nothing had been updated since the last successful boot. The only possibly different thing that occurred was that I had plugged in my Android phone to charge before it booted up. Anyway, the specific error it gives when I enter the password (and I'm absolutely sure it's the correct password):
Code:
No key available with this passphrase.
Here is everything else on the screen:
Code:
doing fast boot
Creating device nodes with udev
[number (not sure if relevant/unique)] fb:conflicting fb hw usage inteldrmfb vs VESA VGA - removing gen
Volume group "system" not found
[Code]...
View 9 Replies
View Related
Sep 11, 2011
Debian 2.6.32-5-amd64 KDE I have to make one of my computers wireless. i need some product recommendations for a wireless access point & a wireless network card.
View 4 Replies
View Related
Mar 23, 2010
When i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies
View Related
Dec 5, 2010
When I had 11.0, I could ssh to my router without problems. When I switched to 11.2, I no longer could (three machines, one new, two upgraded). I have also tried from a VM 11.1. Putty in another VM also fails.
[Code]....
View 9 Replies
View Related
Sep 29, 2010
I have a Belkin F5D6050 adapter, which (despite being only 11b) was working better than my 11n adapter on 11.1 [The 11n stopped working today after I ran an upgrade; I have got it working - in a fashion under 11.3 - see RTL819SU not working with ifup (needs ifup-dhcp first)] I can't connect to my AP. The significant output from dmesg appears to be:
Code:
[19991.327361] wlan1: authenticate with 1c:af:f7:26:01:bc (try 1)
[19991.524037] wlan1: authenticate with 1c:af:f7:26:01:bc (try 2)
[19991.724034] wlan1: authenticate with 1c:af:f7:26:01:bc (try 3)
[19991.924031] wlan1: authentication with 1c:af:f7:26:01:bc timed out
FYI the info from
[Code]...
View 2 Replies
View Related
Jan 21, 2011
I have an Intel Mac that I recently added openSUSE 11.3 to to have a dual-boot system. This has been working fine for me for the last 5-6 months. Then on 1/18/2011 I shutdown my system and totally disconnected everything and moved it all out of my office, so new carpeting could be installed. After it was installed, I reconnected everything and confirmed that everything on my Mac side works just fine. Then I rebooted into Linux and everything worked until I tried to run Firefox to connect to the internet. I'm told every time that it could not connect to the server for whatever I tried to connect to. I AM NEW TO LINUX AND ANY KIND OF NETWORK/INTERNET PROBLEMS, SINCE I'M USED TO MAC WHERE EVERYTHING JUST WORKS. But, I did click on "computer" in the lower left-hand side of the menu bar at the bottom of the screen. This shows on the right-hand side under STATUS "Network: none" and then it states to click this to get it started or connected (I don't remember which) so I click it. This brought up a window asking me for my password and then a new window where it went through a checklist of things and presented me my network settings, which
means nothing to me. However, after this I tried Firefox again with not luck.
View 5 Replies
View Related
May 6, 2011
So I have been having this problem with my WiFi which isn't working. I am currently running on the following:
uname -a
Code:
Linux mmartin6510 2.6.31.14-0.8-desktop #1 SMP PREEMPT 2011-04-06 18:09:24 +0200 i686 i686 i386 GNU/Linux
I am also using gnome-NetworkManager. If I left-click on the NetworkManager icon down on the taskbar near the clock it shows "Wired Networks" with eth0 connected, and "Wireless Networks" is blank under the heading, last week I believe it said something like "device unavailable" or something like that.
Network Details:
iwconfig
Code:
lo no wireless extensions.
eth0 no wireless extensions.
[Code]....
I was curious about when the last time I was able to successfully use my wifi so I checked to see in NetworkManger and it just so happend to be that I was on a business trip in Atlanta on a different network then am usually connected to. Don't know if that has to do with anything but I thought it was worth mentioning.
Also, I thought it may have something to do with assigning an IP address static-or-auto but I am not too familiar with NetworkManager to check that.
View 9 Replies
View Related
Jul 27, 2010
Running openSuse 11.2-64 on a DualCore / 2Gb machine.I have 3 nfs shares described in my /etc/fstabAll three were mounted at boot time when I was connecting to the network through the wired interface (eth0).I need to use the wireless interface, and even if that interface is up and running well (I use ifup), the nfs client doesn't start... if just after boot I do a mount -a or simply a nfs start, everything comes up and runs well.This machine will not be used by myself, and the users cannot just jump into a command line and type nfs start or even mount -a (they would need su privileges...)I have disabled the eth0, killed the eth0 config (with yast) edited /etc/sysconfig/nfs and setted the NFS_START_SERVICE to yes to force the gssd and idmapd to always start even if there was no nfs entry in fstab, but nothing changed.
View 7 Replies
View Related
Jul 10, 2011
I reinstalled OpenSuSE because my hard drive filled up and i couldn't find what was taking up 30 GB of disk space. My SMTP and IMAP were working fine. Now, I can't telnet into smtp remotely and they no longer respond to my mail program.One last detail, I can send out mail to example, gmail.I can receive the mail at gmail but i can't send mail back because the imap and pop3 don't work.
View 3 Replies
View Related
Aug 17, 2011
No wireless after upgrading to linux kernel 3.0 in opensuse 11.4. I'm using Kde and gnome 3, everything was working fine under the 2.6.39 kernel, but now both only detects my wired connection. Any help resolving this would be greatly appreciated. I have a Netgear WNDA3100 adapter that uses the Atheros drivers. It also is no longer detected in my Fedora 15 after upgrading the kernel, but it still works in Mint 11 with the 2.6.38.8 kernel.
View 9 Replies
View Related
Aug 26, 2010
I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message
- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)
This was followed by a message box containing
- UI syntax error
- no widget with ID 'contents
Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)
[code]......
View 8 Replies
View Related
Jul 27, 2011
My wireless is a libertas 88w8335. Suse 11.4 just installed. For this one, I need a windows driver with ndiswrapper. ndiswrapper is installed, and the driver as well.
I can see my networks with iwlist scan my network is set up in yast with ifup (I can scan the networks and find mine), but I cannot connect to my Acces point : there is no SSID with iwconfig.
View 8 Replies
View Related
Sep 10, 2010
I got a development machine with Apache installed. Everything was configured correctly, machine was running perfectly for some time, but today, suddenly I lost connection to my Wireless network.
Now I simply...can't access it. All details are correct, I even turned off MAC Addresses validation to make sure it's not my AP configuration fault. Nothing helped.
Any ideas what could happen? I did not update any libraries/packages. Just got disconnected from my network and cannot access it anymore.
To give more informations: I'm using Broadcom wireless device and b43 driver but I don't think this can be an error. Logs tell me nothing.
View 3 Replies
View Related
Aug 6, 2011
What program should I use to access my wireless network in KDE Trinity? I'm used to using KNetworkmanager (KDE frontend for network-manager), but apparently, KNetworkmanager doesn't work in Trinity. What's the next best thing?
View 4 Replies
View Related
