OpenSUSE Network :: Belkin F5D9050 WLAN USB Network Car On 11?
Feb 15, 2010
Am all of 2 days old on Opensuse 11.0 having just installed it on my old PC. All my experience has been with XP/Vista and Macs and it took some courage to finally try this out. My Belkin F5D9050 wireless(g+ MIMO) usb network card is recognised in yast but does not connect to the internet. On reading through forums I understand that this adaptor uses RAlinks RT73 chipset and support for should already be available in the OS. Is this correct ? If not, where do I get the driver for this and how do I install this. As per the Belkin site, Opensuse driver support isnt listed. Am struggling due to the unfamiliar environment and am not aware of terminal commands.
View 1 Replies
ADVERTISEMENT
Nov 27, 2010
I have just installed opensuse 11.3. I am absolutely new for Linux and for this forum. I have tried to open Network manager to configure my wlan. But its not starting. How to start network manager and configuring my wlan.
View 4 Replies
View Related
Nov 27, 2009
There is no wlan0 interface when trying to run FRITZ!WLAN USB Stick N 2.4 on OpenSuSE 11.2, though it works fine on Fedora 11 and Mandriva Spring 2009.1. All 64bit. Contrary to Fedora and Mandriva, there is no need to compile the compat-wireless module ar9170usb for OpenSuSE 11.2 because the kernel is very recent and includes this driver. Kernel: 2.6.31.5-0.1-desktop The /var/log/messages gives this after I put the stick in the PC. At first it is seen as a mass storage device:
Nov 27 22:00:24 linux-3mwa kernel: [ 73.420755] usb 1-5.1: new high speed USB device using ehci_hcd and address 4
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540834] usb 1-5.1: New USB device found, idVendor=057c, idProduct=84ff
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540841] usb 1-5.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540847] usb 1-5.1: Product: FRITZ!WLAN USB Stick N 2.4
[Code]....
View 5 Replies
View Related
Feb 3, 2011
Tomorrow I'll delete Ubuntu and install Opensuse. I use 100% linux system PC, with no windows and I'm interested to know if someone have found a way to use Belkin Network USB Hub (Belkin : Network USB Hub). Belkin doesn't provide linux drivers for this network hub.I've tried on Ubuntu to install the windows driver with Wine with no success. Maybe in Opensuse It'll be the same, but if anyone have got a good experience with this hardware,
View 2 Replies
View Related
Sep 6, 2011
I have gotten this to work on Xubuntu here: [SOLVED] Ndiswrapper? Does it work? - Ubuntu Forums.I think it would use the same software/firmware? I am using OpenSUSE 11.4 LXDE derivative.
View 4 Replies
View Related
Dec 23, 2009
Cannot Connect to a wireless network using a USB Belkin 802.11g Model F5D7050: Setting up a new pc is running opensuse 11.2 (i586) KDE 4.3.1
Question1) The HCL shows a version, how do I find what version i have?
Question2) Why is rt73.bin not being loaded? I ask this because the file is located in Root/lib/firmware
Question3) Why is Configure Desktop > Network Manager > Wifi is blanked out as if doesnt exist?
Question 4) when using YAST > Network Settings > Initially under wireless network card configuration I can scan the area and find networks successfully (I got 2, one as a wifii hotspot from my pda cell phone, the other is the standard wireless network for laptops and such).... but if i use kinternet >wlan0 > wireless connection, nothing will be found! I did a search on the /var/bootlog msg for "switch" and "radio", for radio I found the following:
<6>[ 9.108858] Registered led device: rt73usb-phy1::radio
<6>[ 9.108884] Registered led device: rt73usb-phy1::assoc
<6>[ 9.108909] Registered led device: rt73usb-phy1::quality
<6>[ 9.109386] usbcore: registered new interface driver rt73usb
[Code].....
View 1 Replies
View Related
Nov 25, 2010
I have recently installed openSUSE 11.3 I have a Belkin G Wireless Network Adaptor
Model: F5D7050
FCC ID: K7SF5D7050E
Linux doesn't seem to recognise this device at all. I had a look online from another PC for drivers. and they are provided by Belkin themselfs but only for Windows XP/Vista.Is it possible to get this working on openSUSE. I previously used this very same adaptor on an Unbuntu 10.2 PC and it worked with no problems at all.
View 1 Replies
View Related
May 26, 2010
configure my Belkin Wireless USB adapter(F7D2101)? I attached the adapter and rebooted the system. I used the hardware info and it is listed but no drivers.
View 1 Replies
View Related
Sep 30, 2009
I can't get my wlan running, although it already worked on my notebook (Dell Inspiron 1545) with opensuse 11.1. Then I installed debian and, I don't know how, it changed my kernel in grub from .pae to .debug (renameing in grub didn't help)
According to the messages scanning fails
My wlan-controller is:
Router is avm Fritz!Box and is working fine with other notebooks and the lan of the Dell
I loaded down and installed the driver from Bradcom (hybrid-portsrc-x86_32-v5.10.91.9.3.tar.gz)
dmesg came up with a failure: not ipv6 server found - so I deactivated it
Below find further info:
View 1 Replies
View Related
Jul 25, 2010
I can't get WLAN up on my Dell Mini 10v (BCM 4312)/openSUSE 11.3/LXDE. And yes, I have thoroughly read iwfingers's 'Getting your Wireless to Work'. After installing openSUSE 11.3 ifconfig can see eth0, l0 and wlan0. No WLAN running. dsmesq|grep firmware prompts me to '/usr/sbin/install_bcm43xx_firmware"
After having done that and reboot ifconfig can only see eth0 and l0. Installing broadcom-wl-5.60.48.36-7.pm.16.4.i586.rpm broadcom-wl-kmp-default-5.60.48.36_k2.6.34.0_12-7.pm.16.4.i586.rpm (current ones from Packman) does, Shall I try to install the drivers without installing the firmware first?
Why does broadcom-wl-kmp-default-5.60.48.36_k2.6.34.0_12-7.pm.16.4.i586.rpm install a new default kernel? Ubuntu Netbook Remix 9.04 had no problems with WLAN.
View 6 Replies
View Related
Apr 6, 2011
Brand new to the OpenSuse project. I'm have an old AMD Duron running 11.3 and I am having no luck in connecting to the www. I'm using a D-Link usb wireless adapter. I seem to have an IP address for the PC. here is the print from ifconfig:
wlan0 Link encap:Ethernet HWaddr 00:12:0E:45:75:F5
inet addr:192.168.2.7 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::218:eff:fec45:75f5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:246 errors:0 dropped:0 overruns:0 frame:0
[Code]...
View 3 Replies
View Related
Jul 6, 2011
Being in China has some disadvantages reagardings internet.To enjoy unfiltered speed and access I use my non mainland mobile phone card.
Using LAN works fine in the office.But if I connect the WLAN USB dongle except skype nothing works.
ifconfig
eth1 Link encap:Ethernet Hardware Adresse 00:1A:A05:26:C5
inet Adresse:192.168.1.3 Bcast:192.168.1.255 Maske:255.255.255.0
inet6 Adresse: fe80::21a:a0ff:fed5:26c5/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
code....
View 5 Replies
View Related
Jan 23, 2010
recently ran into a problem with my internet access. Im using open suse 11.2 on a Dell Vostro 1520 laptop. I managed to get my wlan running and i can use firefox to access my router. In my router the laptop is also showing as connnected, dhcp reserved an ip for it.However if i try to browse the internet, no page is loading, actually no software that needs access to the web is working.
View 3 Replies
View Related
May 1, 2011
I just installed version 11.4 on my system of a toshiba satellite l505d-es5025 64bit.My wlan will not show up at all.I installed ndiswrapper, and all of the wlan from yast.
View 2 Replies
View Related
Apr 22, 2010
I get connected to the internet via a router. The router dials to my provider and is connected to my computers via LAN and WLAN (mostly WLAN, see below). A few days ago I installed Suse11.2 to an old laptop (connected both ways: ethernet with wire and wireless ethernet).
The access to the online repositories worked only after I added the LAN-Adapter (Eth0) to the Demilitarised Zone of the firewall (I did also with the WLAN Adapter).
1. Is this normal?
2. Should I add the network devices now to an other zone?
I want to update my main laptop now from openSuse11.1 to 11.2 via new installation (from DVD) and make this installation right.
Or should I install only the data on the DVD and update after the installation via Yast?
(My main laptop has also an loose contact at the ethernet adapter.)
Greetings pistazienfresser
Now I am using (on my main laptop = Samsung X20) openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition). I have also 2 NTFS partitions for Windows XP (System and Data), and a FAT, a root (/) and a swarp partition. My router is a AVM fritzbox 7270 (firewall should be included).
View 6 Replies
View Related
Aug 16, 2010
I'm trying to install the drivers for my Wlan card, I've downloaded the drivers in the tar.gz-file from Broadcom and untar-ed it in my /home/<username>/hybrid_wl-folder and cd'ed to it and I try to run "make" but I get an error: KBUILD_NOPEDANTIC=1 make -C /lib/modules/'uname -r' /build M='pwd' make: *** /lib/modules*2.6.31.5-0.1-default/build: No such file or directory. Stop make: *** [all] Error 2
I'm getting really desperate, I need my Wlan on Wednesday. I'm following the README but this is what I get.
View 7 Replies
View Related
Nov 12, 2010
I'm unable to get into my university's WLAN network. LAN works just fine, but sometimes it's quite convenient to be able to access stuff wirelessly. It doesn't seem to be a hardware problem, because if I configure my computer according to our computer department's instructions it works fine with Ubuntu (currently I carry around a stick to get into the Internet when I really need it and don't have a cable). Some info:
My device:
Broadcom WLAN controller on a Lenovo G560
My system:
OpenSUSE 11.3 64-bit
The drivers are installed, I can get into normal private networks, but have never managed to get into the university network except for with Ubuntu.
The university instructions tell me to use the following settings:
Security: WPA Enterprise
Authentification: TTLS
Inner Authentification: PAP
Username: My username
Password: Password
CA Certificate: Deutsche_Telekom_Root_CA_2.pem
In the KDE instructions, they tell you to write "anonymous" into the anonymous identity field, but in the GNOME instructions it says to leave it blank. In Ubuntu, I leave it blank and it works.
I've got the recommended settings, which also work in GNOME.
I'd ask the tech support here, but I am the tech support We've got it working with other systems, like I said, but not with SUSE, and I'm a SUSE fan.
View 9 Replies
View Related
Mar 29, 2010
I have searched around a bit for a knetwork manager issue I am having on my opensuse 11.2 32 bit install. My wireless card is an 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) I am currently using the Broadcom wl driver
I am on the Internet with this machine as I am typing using the older "ifup" method. I am having great difficulty connecting to the Internet when I use knetwork manger though. The strange part is when I am connected to my router with knetwork manager, I can log into my Router, but I can not get to any web-page/ping any outside address.
so far the best (I was able to locate) advice I was able to get is located in this post. < Broadcom wireless, partchy internet - openSUSE Forums > following a posted how to to disable IPV6 (I suspect this may be the issue??), I was unable to locate modprobe.conf, or modprobe.conf.local, even after I updated via updatdb. I gave a shot at entering in "disable_ipv6=1" into "menu.lst". However, this did not solve my issue with knetwork manager. If my network information is needed when I am "connected" utilizing knetwork manager
View 9 Replies
View Related
May 8, 2010
i installed suse (KDE) on my old notebook and now I'm trying to get the wlan to connect to our router and can't figure out how to get it to work. My card seems to work, the network manager even finds the router, but i just cant get a connection. I followed the steps of the "Getting Your Wireless to Work" thread and these are the results:
[Code]....
- i messed around a bit with the network settings and might have cluelessly broken something (or broken it more)
- i tried a usb-wlan-card as an alternative, which didn't work either, but could possibly have messed things up even more.
View 7 Replies
View Related
Aug 26, 2010
I am thinking about buying Belkin's Network USB Hub so that I can plugin usb devices and share it over network(Debian based computers). The device's website and spec can be found at: [URL]. Is this device supported by Debian Etch or Lenny? Did anyone used it on any versions of Debian
where it worked? Is there a Linux driver for it?
View 1 Replies
View Related
Jan 12, 2010
My Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
View 9 Replies
View Related
May 2, 2011
Installed F14 on my daughters HP Pavilion a131On. I rebooted multiple times. Do I need to activate something? I'm new to all of this but read through many threads to do as much as I could myself. I used the GUI to load the rt3070 drivers rather than rpm. The GUI is easier I think and should be equivalent. Please let me know what else I need to do. Fedora has been great on my Lenovo but this usb wlan stuff has been a pain.
[Code]...
View 2 Replies
View Related
Jan 3, 2011
My ubuntu installation was running fine with the Belkin F7D1101 v1 after using this install method:[URL]..But, after allowing ubuntu to autoupdate many programs (don't remember which ones), the device stopped working. I checked all of the commands in the link above. They are all still functioning. dmesg throws no errors, but it terminates with
<code>ADDRCONF (NETDEV_UP): wlan0: link is not ready</code> Are there any network files which may have been overridden from autoupdate? iwconfig wlan0 shows "Access Point: Not-Associated" What output can I show you to help me find the problem?
View 1 Replies
View Related
Feb 20, 2011
I'm using a Belkin F7D1101 USB adapter for my wireless internet, and I can't get the damn thing to connect. I've installed ndiswrapper, ndisutils, and ndisgtk, then used the latter to install the driver that came with the CD (though I'm sure I'm using the right one, I've tried all the included drivers with no success). The adapter itself is functioning fine, as I've used it on Windows XP with no issues. It's just not communicating with Ubuntu very well. My issue isn't that I can't get it to show up and search for a network (as I've seen on several other posts about this adapter), but that I can't get it to actually connect to my router. Using WEP 40/128, I enter the password, but after about a minute, I'm simply prompted for the password over and over. I've restarted several times, even installed 10.04 just because I had no idea what to try, and no dice.
View 2 Replies
View Related
Mar 11, 2010
I have a Belkin Wireless G USB Network Adapter but I cant get on the internet with it.The laptop is running Damn Small Linux.Heres what is going on and the code I typed:
ndiswrapper -i rt73.INF
ndiswrapper -l
modprobe ndiswrapper
iwconfig
ndiswrapper says the driver and hardware are present but iwconfig and ifconfig don't say anything.The wireless adapter works fine in windows 2000 and windows xp with the same driver.The green LED on the wireless adapter never flashes like it is supposed to.
View 3 Replies
View Related
Jan 3, 2011
i have ubuntu 10.04 i believe and i cant connect to the intenret i guess its not detecting my wireless adapter. i cant try ethernet cord which prolly would work because i cant move pc to another room....is there any fix for this? i googled linux drivers but i cant find any...i do have the cd that came with the adapter.
View 1 Replies
View Related
Oct 31, 2010
On Linux Mint (Gnome) i used to go to Network drive. that is on the right hand side of Nautilus there is a short cut for Network. in there i could see my network hard drive and other laptops connected to the network, and i could access my files. but on OpenSuse, when i open the network folder, nothing comes up. may be it needs some sort of configuration.
View 2 Replies
View Related
Apr 13, 2011
I recently installed the latest and greatest Lubuntu 64 bit, because I like lxde and I am planning a system migration. (I am really starting to not like windows 7.) I have some linux experience. I wouldn't say I am awesome at it, but I am comfortable trying anything.
Example: I have used CENTOS 5.6 to make a linux machine server as a glorified router, with asterisks, SIP, SSH server, x windows, GNome, VNC, and a user authentication system. and get this I walked somebody through setting this up over the phone. I reopened the root account (I honestly got tired of typing sudo every other command is the only reason why I opened it.) I plan on closing it after we are done.
lsusb lists the wireless adaptor
Wireless Card Link
[[URL]
I have the driver CD. I installed ndiswrapper.I copied the files from my driver cd to my <home> Directory. Then installed the Windows XP version of the drivers using ndiswrapper -l <driver>. I then made ndiswrapper force the driver to the vendor ID of the wireless card. Using ndiswrapper -a <vendor ID> <Driver>(I did this last night and the vendor ID escapes me. I am at work now.)I finally ran depmod -a and modprobe ndiswrapperI goto the windows wireless driver application, and it shows the driver as loaded and the hardware as found.
However, it still does not list a wireless device in the network manager to where I can connect to my wireless. iwconfig does not show any wireless LAN, but it is still listed in lsusb. Also, the light that shows activity on the wireless device does not light up or blink at all. I have about 6 usb ports on my desktop and have tried everyone. The wireless card also works in Windows 7 64-bit On a strange side note. I do have internet access through LAN, (My laptop is atm a glorified wireless card .)
View 4 Replies
View Related
Jul 23, 2015
Since a recent update on Stretch, I have been unable to use the network-manager to connect to my home wireless network on my laptop. It was working fine before. I did not change any settings on the WLAN router. I can still connect to other wireless networks at work and university, just not this particular one at home. All other non-Debian devices in my household are still able to connect just fine.While figuring this out, I have tried connecting manualy with ifup but I don't really know how that works. Right now there is only the loopback entry in /etc/network/interfaces.
Below is the output of syslog, when gnomes network-manager is trying to connect, but fails.
Code: Select allJul 19 20:01:57 debian NetworkManager[6705]: <info> (wlan0): Activation: starting connection 'Affenbande'
Jul 19 20:01:57 debian NetworkManager[6705]: <info> (wlan0): Activation: Stage 1 of 5 (Device Prepare) scheduled...
Jul 19 20:01:57 debian NetworkManager[6705]: <info> (wlan0): Activation: Stage 1 of 5 (Device Prepare) started...
[code]...
View 14 Replies
View Related
Dec 27, 2010
I bought an USB-WLAN stick, which does not recognize any network. A Ralink 802.11 bg WLAN Stick works fine, but the Ralink 802.11 n WLAN Stick does not work unfortunately. Both get recognized by the nm-applet of network manager but only the first one recognizes my network and is able to connect to it.
[Code]....
View 2 Replies
View Related
