Fedora Networking :: Cannot Connect To WiFi On 2.6.40 - Centrino Wireless-N 1000
Aug 9, 2011
My wireless card is:
Code:
03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [8086:0083]
On Fedora 15, when I boot kernel 2.6.40, my laptop is unable to connect to my wireless-G AP. dmesg shows the following:
Code:
[ 43.866090] wlan0: direct probe to 00:27:19:14:c2:ca (try 1/3)
[Code].....
It works fine, however, when I boot using kernel 2.6.38 (from which I am posting) and in Windows. Also, I found some emails from the linux-wireless mailing list which appear to be talking about the same problem.
The system is fully updated. I've tried the 11n_disable=1 hint I came across on the ThinkPad wiki, but it didn't help. (I'm on an Asus K42Ja, in case it's relevant)
Although I'm fine with staying at 2.6.38 for now, are there workarounds/fixes for this?
View 7 Replies
ADVERTISEMENT
Feb 18, 2011
I have Ubuntu 10.10 on a thinkpad X201. Wireless was working, but has stopped. It still works in windows, so it is not a hardware problem. iwlist wlan0 scan sees the available networks, but I cannot associate with any of them, including my own.
Last night was my first attempt to connect to a secured network, and nm-applet failed to make the connection even after entering the WEP encryption key and SSID. By turning networking off in nm-applet I was able to manually bring up the connection by editing /etc/network/interfaces and using ifup wlan0. (nm-applet seemed to be interfering as long as networking was turned on there.) Wireless was working perfectly until I rebooted. Now I can't get it to work at all. (There were some partially completed security updates which completed when I rebooted. I hope this wasn't the cause of the breakdown.)I notice that wpa_supplicant is always running. I tried killing it in case it might be interfering with the connection process, but something keeps restarting it.
View 1 Replies
View Related
Jul 12, 2011
I'm releaving a HP Probook 4710S from it's native Vista) First of all let me say I'm happy because CentOs 5.6 handles it's Ati Radeon graphic flawlessly, unlike other Distro's I tried on this type of machine. So thumbs up for CentOs! But now I've come to a stop on the wireless card.
[Code]...
View 3 Replies
View Related
Aug 29, 2009
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
View 3 Replies
View Related
Jun 9, 2015
I've noticed that my wifi connection is significantly slower than my wired connection. Obviously wired is always faster, but when I boot in to windoze or use Mac, the difference between wired and wifi is negligible. I'm running Debian 8 testing on a Lenovo X201 with Intel Corporation Centrino Wireless-N 1000 [Condor Peak] network card.
View 14 Replies
View Related
Feb 23, 2011
I have a new Thinkpad t510 laptop with an intel centrino wireless N card (no bluetooth). I installed ubuntu a couple weeks ago after I got another hard drive in the expansion bay. I have the drive partitioned into two sections, 250gb for file storage, and 250gb for the linux OS. Currently no other OS is installed on the other harddrive.
I have had everything perfect for the past couple weeks, but once i installed some updates today, my wireless fails to work now. Just some general info that you might ask me, lspci | grep Network, returns
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 Furthermore, on the top right of my screen, my wireless is grey'd out and says no network devices available on hover.
[Code]...
Im trying to connect to my college wireless network. I have looked a thinkwiki and no one has posted any bugs. Any ideas on getting it working again?
View 1 Replies
View Related
Jul 17, 2010
Have been using Ubuntu Desktop Amd64 for 6months, on a dual boot alongside Vista64. Since first installing the OS, I have switched over to Ubuntu & use Windows only for heavy multimedia edition & the occasional gaming.I just bought a netbook and installed Ubuntu 10.04 LTS NBR. Works great, except for wlan. No propriety drivers available for my Intel Wifi Link 1000BGN.
I've spent hours trying to install iwlwifi, but the process is somewhat complicted for a noob such as myself.After much reading and trying, I've managed to download and install iwlwifi-1000-ucode-128.50.3.1.tgz, (following the http://intellinuxwireless.org/?p=iwl...=howto-iwlwifi instructions)and am now working on installing the mac80211 subsystem (following the http://intellinuxwireless.org/?p=mac...howto-mac80211 instructions)When running
Code:
% wget
intellinuxwireless.org/mac80211/downloads/mac80211-10.0.4.tgz[/url]
[code]....
View 2 Replies
View Related
Mar 19, 2010
Using an old (5 year) laptop with XP loaded I installed wubi to save altering partitions etc. It all downloaded fine and connected to the internet by wire. I set up the wireless connection using WPA but could not connect. The wirelsss card does see my network and others. After lurking around the forum and trying various things I found that I could connect without encryption. The more I read the more I became confused.
Anyway what I could glean about my Wireless Card it is a Intersil Prism2 mini usb adapter - but also shows up as an Acer ?? Warplink 802.11.
Using lshw I found this reference to wireless
I became even more confused and got a bit lost using the various codes in the terminal and looking up things about drivers etc but would like to persist.
View 1 Replies
View Related
May 31, 2011
My Intel Corporation WiFi Link 1000 Series wireless card stopped working yesterday after I did an update via Update Manager.After the upgrade, wireless is disabled and the option to enable it in Network Manager is grayed out. I thought that it might be the new kernel, but changing back to the old kernel I still have the problem.
View 8 Replies
View Related
Feb 13, 2011
When I select the wifi icon on the panel, it just shows "No network devices available". I know my network can be found when I search with my iPhone, so I know there are networks to connect to. So, I checked the drivers, and it informs me that the B43 and STA drivers are not activated. So thats not a big deal, I guess, but when I use my ethernet cord, my laptop doesn't recognize/acknowledge (I'm not sure what the right term would be)it. I'm fairly sure I can't activate these drivers without an internet connection because when I do try, a message pops up saying "failed to fetch" with some long link.
My only guess is that it could be a hardware problem, but I really have no idea. I guess the ethernet problem is my only real problem. Because after I establish and internet connection the the rest is easy to fix.I'm sure its obvious, but I'll go ahead say that I'm a novice ubuntu user. I've only been working with it for about a week, but I'm learning alot.
View 9 Replies
View Related
Jun 16, 2011
I just installed 9.10 and I can't detect any wireless networks. Is the card compatible with 9.10? Do I need to install any drivers? If the card isn't compatible with 9.10 is it compatible with later versions of Ubuntu? Marking this as somewhat urgent as I need to get internet access for some coursework soon, and also because my parents will kill me if they find out I've done anything unusual with the laptop because it's new and they think anything non -MS is a virus.
View 9 Replies
View Related
Oct 27, 2010
I have a telephone connection of 1 mega internet modem huawei mt 880 SmartAX my desktop computer is connected via an ADSL PPPoE.I use Ubuntu 10.04 in Spanish and want to know how to connect a WiFi router TP-LINK TL- wr942nd to provide wireless Internet to other 2 PC, a desktop with a plaquet wireles G CNet CWP-854 and 500 series notebook olivetti olibook. The issue is that when I connect the router I can not even go online and do not know how to operate the network, I can not even connect the desktop to my internet provider
View 1 Replies
View Related
Jun 24, 2010
I am having trouble establishing a connection with my WPA wireless network at home. Other laptops at home can connect to this network and even the Eee PC can join free wifi networks. The problem seems to be only with WPA networks. When I enter the password for the WPA network, it tries to connect for a while and then shows me the password dialog box again. I don't get any IP during this time, its always 0.0.0.0 I reinstalled my Ubuntu netbook remix but that didn't help. This problem was occurring in the standard Ubuntu 10.04 too.
View 2 Replies
View Related
Feb 5, 2010
I am trying to get the RT2860 card in an Eee PC 1000 to work. I have tried Ubuntu 8.04 and 9.10, all the "fixes" below I can find on the web but nothing seems to work.
[URL] I downloaded the source code from Ralink and using module-assistant followed the instructions.
I can see the wireless network, it tries to connect but just keeps asking for the security key. I have tried WEP, WPA and no security at all but still no go. All works fine if wired. The F2 toggle seems to work OK, the WLAN is switched on in the BIOS. The "iwconfig" command shows the RT2860 in Ubuntu 9.10 but not in Ubuntu 8.04.
View 2 Replies
View Related
May 2, 2010
I have just installed Ubuntu 10.04 and the wireless connection on my Asus EeePC 1000HE is not working.
Network is seen but connection is always rejected and pops up the dialog requesting my password. Password is entered properly and using proper protocol (WPA2)
Network is working perfectly under Windows 7 and Fedora.
View 4 Replies
View Related
Oct 31, 2010
I use ubuntu netbook for an eee pc 1000h because windows is underpowered. I got it working perfectly in 10.04. I upgraded to 10.10 thinking, if they got it right with 10.04 then surely 10.10 should be fine. All function keys except wireless work.
1. After sleep, wireless turns off. Have to restart and re-enable in bios.
2. If I disable and the re-enable wireless networking it tries to connect but never does resulting in a reboot needed. Checking bios wireless is enabled and connects perfectly on reboot.
Just don't close the lid and sleep because you need a restart. Why would 10.04 be easy and the new version fail? I am windows user and linux does not do this kind of thing normally. MS screws things up with upgrades not linux surely.
View 5 Replies
View Related
Sep 27, 2015
I've recently bought a Dell Latitude E4310 off ebay. Wifi chipset is Intel(R) Centrino(R) Advanced-N 6200 AGN. I'm using Debian 8.2 with Gnome 3 and I've installed firmware-iwlwifi.
Wifi shows up in Gnome upper bar, it correctly scans the networks and seems to connect successfully to my home router but internet doesn't work, it doesn't seem able to load any page.
Code: Select alluname -a:
Linux latitudeb 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) x86_64 GNU/Linux
Code: Select allip l:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 5c:26:0a:2e:c4:86 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
link/ether 58:94:6b:b0:6a:2c brd ff:ff:ff:ff:ff:ff
[Code] ....
View 3 Replies
View Related
Jul 7, 2011
I'm running Linux 11.04 and my wireless network was working just fine until today. I cannot connect to WiFi - it acts as if the device wasn't there. The hardware switch led isn't working. No matter how much clicking on it, it won't work.
iwconfig:
Quote:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm
[Code].....
View 3 Replies
View Related
Jun 21, 2009
I tried to connect to a WIFI require WEP key. I make the WEP key myself. I wrote it down on a piece of paper myself. My PSP can connect to the network, my XP can connect to the network. But same machine, my Fedora 11 can not connect to the network. As long as I tried to connect to the network, network manager just keep asking me for the WEP key. I put in the WEP key and tired out every option the network manage offer(WEP40/128bit, share key, etc),
View 3 Replies
View Related
Aug 10, 2011
I just installed Fedora 15 on my HP mini 210-1000, everything is working fine except my wifi is not up. It says firmware missing. How do i fix this problem? Previously I used to have Ubuntu 11.04 on it and wifi worked fine, but I need Fedora as i am using .rpm based applications. So please assist me in getting my Wifi up! lscpi gives this:
Code:
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
*edit* sorry, found a solution in another post on the forum : [URL]...
View 8 Replies
View Related
Jan 21, 2010
I have just installed the last FC distro, and everything works good, except the wireless network.I have a Linksys N-Ultra WirelessN USB wifi card, model WUSB600N.It uses the rt2x00 driver, concretely the rt2870 driver (at least, thats the driver included in the original device drivers CD).Right now, the problem is that i don't know how to make my Fedora 12 to enable and/or connect to internet.
dmesg | tail
usb 1-3: Manufacturer: Cisco-Linksys LLC
usb 1-3: configuration #1 chosen from 1 choice
[code]...
View 4 Replies
View Related
Aug 10, 2010
My laptop has an internal wifi adapter, but I recently purchased another one because of its extended range.susb, shows that the new adapter is:
Code:
Bus 002 Device 027: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
After disconnecting my internal adapter from the wireless network, I can scan for networks
[code]...
View 13 Replies
View Related
Sep 25, 2010
I just installed Fedora 13 64bit Gnome, but I can't connect to the internet for some odd reason.
If you look at the image below:
I have marked the network icon, but on my desktop I don't have that icon for some reason...
Since I'm new @ Linux(Picking it up again) I went to the services and checked 2 services:
The network manager service was running but the status said: This service is dead.
And the network service was also running but status was: The status of this service is unknown.
I also went to the Administration menu and checked Network, the first tab showed no devices, but when I went to the hardware tab it did show my card.
I also don't believe that this is hardware problem since the card worked just fine under Fedora 9 or 10(Don't remember).
So if anyone got some solutions for me it would be great...
Some related hardware info:
lsusb
Code:
Code:
View 2 Replies
View Related
Mar 3, 2010
The auto connect feature of NetworkManager Applet (version 0.7.997) isn't working on my system. If the WiFi connection dies, Network Manager doesn't detect that the connection has been lost and try to reestablish the connection. I have to manually click on the WiFi hotspot to reestablish the connection. This appears to be the case both while the computer is running and when I first boot it up (i.e. when booting, if the first attempt at establishing a WiFi connection doesn't succeed, Network Manager doesn't retry or try another hotspot).Is this "normal" behavior for Network Manager? If not, does anyone know a fix? Here's some more info about my system:
Computer: Dell Inspiron 1318 laptop
WiFi Chip: Broadcomm BCM4238
Kernel Version: 2.6.31.12-174.2.22.fc12.x86_64
[code]....
View 3 Replies
View Related
Aug 6, 2010
I know Windows forward and backward but I am so new to linux it's just wrong. I just installed fedora (like 1hr ago) on and old toshiba laptop with a WiFi PC card. Everything seems to work fine except. My Networks connects to my home Wifi network but it will not connect to internet. When it connects the IP address isn't even close to being in the same range as my other laptops and PCs. Like I said I'm new to linux but I'm wanting to learn. Any fixes for this issue? Which linus book is the best one to read for a beginner? Other then not connecting to internet I have no complaints.
View 14 Replies
View Related
May 5, 2009
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
View 7 Replies
View Related
Aug 4, 2009
Every time I start up my Samsung NC10 the wifi doesn't seem to find my wireless router at all and instead tries to connect to my printers network. To solve this I need to disable and re-enable wireless until it automatically connects. I know this isn't exactly a major problem, it's just getting pretty annoying. I'm using Fedora 11 btw.
View 3 Replies
View Related
Nov 23, 2010
Does fedora13 support pppoe over usb wireless wifi?
View 8 Replies
View Related
Aug 5, 2009
I have been trying to test the use of X window forwarding over SSH in a cafe. The Cafe's WiFi requires login via a web browser. Using Fedora 11 with Gnome on a Dell Latitude D600 laptop, the wireless works just fine. I am able to use a virtual terminal to ssh to my server at home. NX client/server works also. However, when I change to Run Level 3 on the Laptop in order to use X Window forwarding, wireless networking fails to function. Will wireless networking function at Run Level 3, and if so, how is that accomplished? Also, if I get Wireless to work at Run Level 3, will I be able to login to the free public wifi using Lynx or some other text browser, as I can with IE and Firefox?
View 7 Replies
View Related
Sep 7, 2010
I've recently salvaged a computer I found gathering dust in the basement and decided I'll have it running on Fedora (I have a summer studentship coming up that needs Linux use so I thought I'd best start learning!). Following a clean install, Fedora can see the wireless network just fine. I try to connect and nothing happens. Half of the time it will ask for the PSK (yes, I promise I'm entering it correctly) and the other half of the time it will just stop. When it does ask for the PSK I enter it (correctly) and it will ask me again... and again.
Quote:
uname -r
2.6.33.3-85.fc13.i686
Quote:
lspci
00:0b.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
[Code]....
View 11 Replies
View Related
