I had a problem with my laptop which is dell studio 1569 wireless card is as shown above intel centrino advanced n-6200. I had ubuntu before and it worked very well but with centos and oracle enterprise linux (not unbreakable) it does not work at all? And also the graphics card not fully configured I knew that when I tried an opengl apps?
View 3 RepliesA got a new laptop with Centrino Advanced-N 6200 Wireless card and i want to use Kismet.
From my search i didn't found anyone using this with Kismet neither in their documentation.
Does anyone know which driver shall i use?
I just received a laptop hp Elitebook 8560p, i installed fedora 14 on it. Archi : Linux 2.6.35.13-92.fc14.x86_64. So I installed without probleme the ethernet driver e1000e, but the wifi become a problem ! The wifi card is an intel centrino advanced-n 6205 agn. So I google it like other people and i found this :
http://intellinuxwireless.org/?n=downloads I downloaded the iwlwifi-6000g2a-ucode-17.168.5.3.tgz and i copied the ucode in /lib/firmware and reload the iwagn with rmmod iwagn and modprobe iwagn as the link say.
It doesn't work, i tried with compat-wireless too, not succeed.I have any problem message in dmesg.
To make Intel Centrino Ultimate-N 6300 wireless card work on ubuntu, you just need to download the firmware from here decompress it and copy the ucode in /lib/firmware. This works in jaunty. My laptop is a HP Elitebook 8440p.
View 2 Replies View RelatedI'm releaving a HP Probook 4710S from it's native Vista) First of all let me say I'm happy because CentOs 5.6 handles it's Ati Radeon graphic flawlessly, unlike other Distro's I tried on this type of machine. So thumbs up for CentOs! But now I've come to a stop on the wireless card.
[Code]...
I just replaced my Broadcom 4312 card with an Intel Centrino 6200-N card. The install went fine (dmesg | grep iwl shows that it's physically installed) and the result of "rfkill list" is:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
I downloaded the most recent drivers from Intel for the 6200 and extracted the tar. I opened the .deb file: linux-headers-2.6.33-02063304-generic_2.6.33-02063304_i386.deb and it started a Package Installer. In that process an error occurred "Error: Dependency is not satisfiable: linux-headers-2.6.33-02063304." I've searched but could not find a fix for this error. I am using 10.4 and obviously my wireless is not working (but Wicd wireless is enabled).
I'm totally new in solaris and I want to hit it, can I install it in my laptop intel centrino core 2 duo (x86-32bit)
View 4 Replies View RelatedI just got a new laptop equipped with some weird (at the present) hardware.
=> Intel Corporation Centrino Wireless-N100
=> Atheros Communication Device 1083
During the squeeze install no network harware was detected. (no wired, no wireless) On the net I read the wireless-N100 should be supported from the kernel 2.6.37 At last I tried Ubuntu 11.04 (LIVE) and the wifi was working. I also tried Fedora 15 (LIVE) and the wifi was also working. (kernel 2.6.38)But I want to stick to Debian (I am using it since Potato) What could I do to get at least the Wireless-N100 working ?
Alright this is my first post on here and I hope I got sufficient Information for you available. I ran Ubuntu based Distros before but this is the first time under a Debian based Distro for me. I got a newlaptop and this one does not seem to let me get my wireless to work after multiple efforts
My problem: My Intel Centrino N-6300 () does not seem to find any network connections.
My previous attempts: (Some of which required me to reinstall Suse)
1. I installed new kernels as my first assumption was that the kernel was not supporting it. I know now that it is supported.
2. I installed drivers from http://intellinuxwireless.org/ which was pointless.
3. I installed backports (THat was still under Linux Mint. Same problem there.)
4. I tried NDiswrapper without success.
5. I checked rfkill as you can see further down below.
Alright here are some of my info's I have collected so far. Let me know if anything is missing.
RFkill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[Code].....
I have a new Thinkpad t510 laptop with an intel centrino wireless N card (no bluetooth). I installed ubuntu a couple weeks ago after I got another hard drive in the expansion bay. I have the drive partitioned into two sections, 250gb for file storage, and 250gb for the linux OS. Currently no other OS is installed on the other harddrive.
I have had everything perfect for the past couple weeks, but once i installed some updates today, my wireless fails to work now. Just some general info that you might ask me, lspci | grep Network, returns
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 Furthermore, on the top right of my screen, my wireless is grey'd out and says no network devices available on hover.
[Code]...
Im trying to connect to my college wireless network. I have looked a thinkwiki and no one has posted any bugs. Any ideas on getting it working again?
i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....
and i solved the black screen problem changing the driver for i810
Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection
I've recently bought a Dell Latitude E4310 off ebay. Wifi chipset is Intel(R) Centrino(R) Advanced-N 6200 AGN. I'm using Debian 8.2 with Gnome 3 and I've installed firmware-iwlwifi.
Wifi shows up in Gnome upper bar, it correctly scans the networks and seems to connect successfully to my home router but internet doesn't work, it doesn't seem able to load any page.
Code: Select alluname -a:
Linux latitudeb 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) x86_64 GNU/Linux
Code: Select allip l:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
  link/ether 5c:26:0a:2e:c4:86 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
  link/ether 58:94:6b:b0:6a:2c brd ff:ff:ff:ff:ff:ff
[Code] ....
I have Ubuntu 10.10 on a thinkpad X201. Wireless was working, but has stopped. It still works in windows, so it is not a hardware problem. iwlist wlan0 scan sees the available networks, but I cannot associate with any of them, including my own.
Last night was my first attempt to connect to a secured network, and nm-applet failed to make the connection even after entering the WEP encryption key and SSID. By turning networking off in nm-applet I was able to manually bring up the connection by editing /etc/network/interfaces and using ifup wlan0. (nm-applet seemed to be interfering as long as networking was turned on there.) Wireless was working perfectly until I rebooted. Now I can't get it to work at all. (There were some partially completed security updates which completed when I rebooted. I hope this wasn't the cause of the breakdown.)I notice that wpa_supplicant is always running. I tried killing it in case it might be interfering with the connection process, but something keeps restarting it.
I've a Centos 5.1 server on S5000vsa Intel board with 6 bay HD in raid 1 mode (2 HD), and working fine until I've decide to make a yum update. Today the Centos is 5.4 but seems necesssary to upgrade the megasr driver for the raid function (i.e. , is not possible to contact the raid firmware trought Web Console 2). I've download the last megasr driver from Intel and I follow the instruction to upgrade the driver with s.o. installed, but when I start the server and choose via grub the new img boot file, the display show :
megasr.ko invalid module format -1 and stop. The linux version is the same in the machine (uname -a) and from the driver (2.6.18-164.9.1.el5). Another question : in Intel instruction spoken about megasr.o , but on img file I found a megasr.ko . I think instructions referre to old linux 2.4
I've got a 64-bit CentOS 5 setup and I'm trying to run startx, but when I do I get:
I tried changing the display driver to i810 in xorg.conf but it can't find that module either.
in order to using the SR-IOV, according the guide HOW_SRIOV [Moderator edit: fixed link.]but i can't got the VFs.so i try to compile the driver :igb-2.4.13 and igbvf1.0.7.but i failed to install them.when i make install the igb-2.4.13 i got the errormsg:root@localhost src]# make installakefile:106: *** Linux kernel source not configured - missing version header file‚[root@localhost src]# i alreadly installed the kernel-headers-2.6.18-194.32.1.el5.x86_64.rpm .some system info maybe needed:Information for general problems.
== BEGIN uname -rmi ==
2.6.18-164.el5 x86_64 x86_64
== END uname -rmi ==
[code]....
Unfortunately I've had no luck with using the default intel driver. It's strange really, you can see the gnome screen for a split second then it turns the display off like it's activating the external monitor or something. If I change the driver to vesa everything is fine.
Here is my info.
2.6.18-194.el5 i686 i386
kernel-2.6.18-194.el5
centos-release-5-5.el5.centos
00:02.0 "VGA compatible controller" "Intel Corporation" "Mobile 4 Series Chipset Integrated Graphics Controller" -r09 "Acer Incorporated [ALI]" "Unknown device 048a"
00:02.1 "Display controller" "Intel Corporation" "Mobile 4 Series Chipset Integrated Graphics Controller" -r09 "Acer Incorporated [ALI]" "Unknown device 048a"
00:02.0 0300: 8086:2a42 (rev 09)
00:02.1 0380: 8086:2a43 (rev 09)
Wireless networking doesn't seem to work. When I try to create a new network interface with system-config-network, my wireless card doesn't show up. The following comes from dmesg:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[Code]...
I saw a post about this elsewhere and downloaded some firmware drives from [URL] and installed then. But, I'm really out of my league when it comes to this kind of stuff.
Perhaps someone has run across this problem I loaded CentOS 5.3 on an AOpen MP45-BDR workstation. It uses the Mobile Intel 4 Series Express Chipset for the video graphics. It is officially identified as: GM45 chipset (Intel GMA X4500 MHD).
There are two problems. Using the "intel" video driver, the X11 server does not appear to support digital video cable (DVI interface). It is also stuck in 1024x768 resolution and I want it to display in 1280x1024 resolution. Using a DVI cable, the system boots and displays properly (GRUB and boot messages) until the X11 server starts, then the signal is lost. The system is configured with a dual boot (Windows XP Pro) and Windows operates properly and supports all of the features of the video graphics chipset (DVI and full resolution). So the hardware is ok.
The "intel" video driver has a description of "Experimental ..." so maybe there is an update to this driver or a replacement driver that supports this chipset. I checked the buglist and found CentOS bug ID 2951 which is somewhat similar. The user was utilizing the "intel" video driver and it locked his system but changing the driver to i810 was a work-around. My system does not lock. I did try the i810 video driver but the X server did not like it - it would not start. This makes sense since the description of this driver specifies support for the older Intel onboard chipsets.
[Code]...
I just installed linux Mint 9, although I was having the same exact problem with ubuntu 10.04. Just testing mint out for a bit. I am running on the 64 bit OS. When I got to select advanced visual effects, It goes to enable the drivers but then I get this message.
"SystemError: Failed to fetch [url] Not Found [IP: 91.189.88.45 80]"
It used to work before but then just stopped one day when I booted up. I use Docky, and it won't work without the drivers because it requires compositing to work properly. I am using a Nvidia GTX 260 video card if that has anything to do with it.
Is it possible to enable the desktop effects without enabling the proprietary driver? Im using an Asus 51vx with Nvidia Geforece GTX 260m and the proprietary drivers kind of suck. My resolutions (although set correctly) are distorting pictures, my dual monitors is being funky and unpredictable... etc. Everything works great without the drivers installed except i cant enable advanced desktop features so my awn looks good . I know its just cosmetics, but i love my cosmetics, and they took a loooong time to get perfect.
if this is a repost but i couldnt find it anywhere. (so much info about advanced desktop effects out there).
I am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.
View 2 Replies View RelatedI have installed xubuntu 10.04 on a HP Pavilion dv1049ea and am having trouble installing the drivers for the graphics card. When installing i had to use the boot option -xforcevesa in order to get the screen working. Now that it is installed there is constant screen flicker but apart from that all other aspects of the system are working fine. In the display menu i am unable to change the refresh rate. How do i change the running driver from vesa to the correct intel driver? The graphics card is an Intel Graphics 82852/82855.
View 2 Replies View RelatedWhat is the most advanced GUI torrent client that work perfect in CentOS 5.3 GNOME Desktop?
View 5 Replies View RelatedI'm trying to disable TCP Segmentation offloading across the board in our datacenter to improve performance. Reading the history in the CentOS Bugzilla and the upstream's Bugzilla, they recommend doing this within the udev rules. See:[URL].. So, I created a new udev rules file that looks like this, as filename /etc/udev/rules.d/50-eth_tso.rules:
ACTION=="add", SUBSYSTEM=="net", NAME=="eth0", RUN+="/sbin/ethtool -K eth0 tso off"
ACTION=="add", SUBSYSTEM=="net", NAME=="eth1", RUN+="/sbin/ethtool -K eth1 tso off"
[Code]...
Can anyone out there figure out just what I'm doing wrong - I've been struggling with this for about 2 hours trying to make it work, and simply can not figure it out - and would like to not resort to hacking the problem and adding the ethtool commands to /etc/rc.d/rc.local!
I'm trying to create a user account for my children in Ubuntu 10.04
When creating their account, I have turned off the 'Connect to ethernet and wireless' option of the Advanced Settings.
However, when I log into their accounts, they still have full access to the internet through both the wireless and ethernet connections. Is this option for some other purpose?
Is there an alternate way to limit internet access for childrens' accounts in Ubuntu? (I'm used to MS Family Safety as a filter for internet access - is there an eqivalent for Ubuntu?)
I have 2 WD20EARS hard drives on the way (2 TB green WD disks with 4k sectors) and I'll be installing Centos 5.5 in RAID1 on them (2 partitions, one 16 GB / at the beginning and the rest in its own partition). I read the following thread: [URL]
and it seems that I might be having problems with the 4k sectors (Advanced Drive Format in WD lingo). I'm confused as to what exactly to do. I was thinking of downloading Fedora 14 Live CD and partitioning there and then switching to Centos 5.5 to install. Will that work? Seems I want the md 0.9 metadata because it doesn't have the space limit for me (2 TB) and it's stored at the end of the partition so it avoids alignment issues. Will I be able to make that happen with Fedora 14?
I have a Raid5 software partitioned using LVM (at centos 5.2 installation). Actually the raid is composed by 3 320Gb HDD. I would like to replace them with 3 2T hdd, but I'm worried about the alignment issues of the upgrade. I know it is easy to align the raid partition URL But what will happen to the LVM partition? Reformat and install everything is not an option
View 15 Replies View RelatedI've installed from the CD the Centos version 5.5. When I try to connect to Internet I can't because I received some errors. I've the Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller also a wireless slot (I've the wireless card DWL-G650+) When I turn on the pc and I go to "Ethernet Device", I see set: peth0 (Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) ETHERNET CONTROLLER) and also set "Bind to MAC address": fe:ff:ff:ff:ff:ff I've set manually the IP address (I'm under router). Status is "Active" but can't go on the Net. When I change to "eth0 (Intel EtherExpress/100 driver)...sometimes become "Active" an other times said that the MAC address is different or to check the cable because can't find the IP. What can I do?
View 5 Replies View RelatedI have an IBM X3250 M3 server were Iam trying to install Fedora 9 version on RAID 1 and am unable to configure it. Some body guide me with LAN card driver for Inetl 8000 series Gigabit NIC card driver for fedora 9.
View 1 Replies View Related