OpenSUSE Wireless :: 11.3 Wireless Config And Hibernate?
Aug 13, 2010
just completed an new install of 11.3 on a laptop and have a couple of wireless config questions.the wireless is set for ifup mode and have been using iwconfig to set the ssid. is there a preferred way to automatically set the ssid? something that avoids setting a fixed ssid in ifcfg-wlan0. this laptop had 10.3 and to restart the network after wake-up from hibernation i had to run a script from pm-utils/sleep-d. it looks like i may have to do the same for 11.3. or does 11.3 have a better way?(NetworkManager in 10.3 gave me all kinds of grief, so i stopped using it. perhaps it is improved in 11.3, but i have not given it a chance.)
View 1 Replies
ADVERTISEMENT
Nov 5, 2010
I'm moving from other distros. and I'm currently loving openSUSE and I'm probably going to stick with it for a long time.I have already googled for this, but I found no solution, but I figured this should be a common problem... Does google searches inside this forum?Now... for my problem, whenever I hibernate (suspend to disk) or sleep (suspend to ram) I can't resume my wireless connection nor connect to another.I don't know if this is an issue if I use cables, because I simply don't with my netbook:The hardware in question is an ASUS 1005HA eee pc, running openSUSE version is 11.3 fully updated. Didn't mess with wireless connections, nor kernel or hibernate settings
View 9 Replies
View Related
May 31, 2011
I fixed my wireless driver, turned on power management, and, that keeps getting reset to the defaults after sleep or hibernate (KDE control panel). There are many places to hard code fixes like these, but, is there some place dedicated to post-restore scripts? I don't want to put my script somwhere that it's going to get clobbered on a system update.This system really needs an /etc/rc.local anyway. Can I just create one and put it in the string of things to run at transition between runstate 3 and 5? Will that always get run with the powermanagement stuff?
View 1 Replies
View Related
Sep 15, 2011
wifi card:atheros ar5007egOS: openSUSE11.4My laptop can't connect on network after system hibernate. It has been asking me for enter the wifi password. But when I input the wifi password it still can't connect on network. I have to reboot it.
View 3 Replies
View Related
May 13, 2010
This is my 1st time to use openSUSE After install
Code:
lsusb -v
Code:
Bus 002 Device 002: ID 0411:0137 MelCo., Inc.
Device Descriptor:
bLength 18
[Code].....
View 1 Replies
View Related
Apr 1, 2010
My first problem is that when I open KNetworkManager the wireless tab is desibled,I don't know why! My laptop is HP pavilion dv6-1245DX. How to get connected to my wireless router?
View 9 Replies
View Related
Jan 5, 2011
says wireless unavaliable, do a ifconfig and it doesn't show up.
need to restart computer to get wireless back.
or even a command to run to restart the wireless (/etc/init.d/networking restart doesn't work)
wireless chip: RT2500
View 9 Replies
View Related
Apr 27, 2010
If I put my computer into sleep or hibernate, I have no wireless connection when I start up again. I click on the wireless manager in the tray, but wireless is disabled and I can't enable it. This never happened until I updated to Ubuntu 9.10.
I am using the b43 driver (I think), but I'm not sure which command to execute to display information about my wireless card.
View 2 Replies
View Related
Dec 11, 2010
I have an annoying problem which I am not able to solve. I have installed Ubuntu 10.10 on my home laptop (MSI X410) and I wanted to use it as a media PC stored in the shelf under my TV. The issue is that I cannot open the lid everytime I want to use the PC because of the height of the self.Everything is working fine (HDMI to TV, running with closed lid once turned on...) except sound - no sound via HDMI. However, I think I might bypass this issue by audio cables though I haven't tried it yet.
Anyway, the issue is that I don't want to keep my laptop turned on 24/7 and once done, I would like to hibernate it/put it to sleep, to save energy, prolong lifetime of the pc and get rid of the noise. The restoration from hibernation/sleep works flawlessly, however I can do than only by pressing the power button (hidden under the closed lid).I can put the PC to sleep by pressing sleep button on my wireless keyboard, but I cannot restore it by pressing the same button, enter, or even power button on the keyboard itself. It seems like the keyboard is automatically unplugged when hibernating (which could be quite
View 2 Replies
View Related
Oct 9, 2010
I recently installed 10.04 and everything Just Worked.Before Lucid, I was using 9.04 and had successfully gotten my Broadcom 4306 working perfectly... which is why I think the Lucid install went so perfectly.Well, after a botched hiberation (Dell Inspiron 9100), my wireless is dead in the water.I've tried "ifdown", "iwconfig", "/etc/init.d/network restart" and "force-reload", 'modprobe -r b43'
View 1 Replies
View Related
Jul 17, 2010
I have three problems with my new Acer Aspire one 721 (Amd, ATI) [url]
1) Pymouth doesn't work when booting. I have to use the parameter "nodeset". Desktop effects are working. I have installed Mesa based DRI drivers (experimental).
2) I have to manually "enable wireles" to acess the wlan. It should connect automatically.
3) the laptop doesn't wake up from suspend/hibernate. I have to use brute force to restart. pm-suspend.log
Code:
View 1 Replies
View Related
Jul 17, 2010
Want to eventually make the switch over but figure taking it slow and learning on an old laptop would be best.
I went through the installer and everything looks great so far except I can't for the life of me seem to be able to get the wireless working. I tried everything a windows newb like me could think of ... it looks like to me the wireless card is not being used since it can't detect anything? I read some threads and here are the results of common terminal stuff that most people say to do:
/sbin/lspci
Code:
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 02)
02:01.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
code....
View 9 Replies
View Related
Feb 7, 2009
I have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
View 7 Replies
View Related
Apr 17, 2010
at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
View 2 Replies
View Related
Aug 5, 2010
I am getting trouble with knetwork manager. I created a new connection by scanning and connecting using knetwork manager. But every time connection gets disconnected and ask for password and again it connects.
View 8 Replies
View Related
Aug 12, 2010
I have a Acer Revo R3610 nettop on which I installed oS11.3. It has an Atheros AR5001 wireless network adaptor.I'm getting very bad latency and throughput on with this card. In comparison my Thinkpad with Intel card achieves at least 10 times the throughput from the same location. Also when I boot my wifi will come up authenticate and then a few seconds later disconnect and reconnect. I've tried updating the kernel to 2.6.35 as one of the fixes was to improve the performance of the ath5k driver. I'm using wpa2 authentication.
Here are some details:
Code:
mediacentre:~ # /sbin/lspci -nnk
00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1)
Subsystem: Acer Incorporated [ALI] Device [1025:0222]
[code]....
Is there anything else I paste that will help determine the cause of the bad throughput. Browsing the web or copying files across the network is bordering unusable.
View 9 Replies
View Related
Feb 12, 2011
I have an Atheros AR5007 802.11 b/g WiFi Adapter. I use OpenSuse 11.3, KDE desktop.When I did iwconfig, it displayed the following:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"sami"
[code]....
View 6 Replies
View Related
Mar 14, 2011
I had the Wireless Broadband working. It stopped working after I closed the laptop (suspend). Also the wifi will not connect until reboot. Now the entry for the Wireless Broadband is gone, and the tab for it is greyed out as well.I would be happy to submit this as a bug and assist with the debugging process.
View 2 Replies
View Related
Mar 29, 2010
I got ubuntu working fine on my netbook and wanted to play around with opensuse. I have it installed and everything works fine except my wireless connection. I have updated everything since the installation through a wired connection, that didn't help. I have read the stickies, but to be honest, I'm so new to this stuff I'm kinda lost. So my wireless network has a WEP encryption and I have entered that password as a 64 HEX Key in the Wireless Manager widget. It connects to the network and says is labeled as active, however there is still the yellow exclamation shield next to the connection. Firefox and other apps don't have access to the internet.
View 9 Replies
View Related
Apr 13, 2010
On Opensuse 11.2, I would like to connect my ipod touch to a wireless ad-hoc network of my laptop. I have no wireless WIFI-router at home, so I have to use the laptop as a router to the internet. I know I have to enter a static IP adres and my router's address, but where ? I haven't found any place under network tools to do this, only saw some fields with SSID's and MAC addresses to fill in.
View 5 Replies
View Related
Aug 17, 2010
i have the cd just do not know how to install the driver for my linksys wireless pci card 14e4:4329the device is BCM43XG
View 4 Replies
View Related
Sep 30, 2010
I've got openSUSE 11.3 running via liveUSB on a netbook and no matter how many times I try, I cannot get wireless to connect to my network.
My network is:
- non-broadcast
- WPA2 Personal
- G
The netbook is fairly recent from Asus and wireless works perfectly with Fedora 11 and Windows XP.
View 5 Replies
View Related
Oct 27, 2010
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
View 9 Replies
View Related
Nov 3, 2010
i'm running 11.3 kde 4.4, with a Broadcom 4318. since installing 11.3 a few days ago, whenever i'm connected via wireless, one of two things always happen: when trying to play video (hulu, ....., etc.) in firefox, within a minute or so i will get the BSOD--that is, my screen will go black, and my cap/num lock lights will flash on and off. also, when regularly browsing the internet...not long after opening firefox, it will stop working like i have no connection, and then i will get a frozen screen and system within a minute or two after seeing a variation of this communication message:
"Message from syslogd@sbkra at Nov 2 21:09:53 kernel: [956.784417] process irq/11-b43 (pid: 1974, ti=debee000 task=dd291170 task.ti=debee000 Message from syslogd@sbkra at Nov 2 21:09:53 kernel: [956.784424] Stack: Message from syslog@sbkra at Nov 2 21:09:53 kernel: [956.784458] Call Trace: "a couple times, i've gotten this message and the following freeze when running video in firefox.
strangely, i have no problems running streaming audio through smplayer. and i have no problems playing saved video files through smplayer. and i have absolutely no problems whatsoever browsing or playing online video while connected via ethernet.
i've also searched through the various forum sections to try to address the issue, but nothing i've tried has worked. nor has anyone had a problem identical or even similar to this. btw...in relation to "broadcom", yast tells me that i have "b43-firmware" and "b43-fwcutter" installed. nothing else. i do not have "ndiswrapper" installed, because this gave me problems in 11.2, and this problem mentioned here was happening in 11.3 before i uninstalled "ndiswrapper". and the repos i have are: Packman, OSS, Non-OSS, and Update.
View 9 Replies
View Related
Nov 8, 2010
Sorry for repeating the same old complaint but there doesn't seem to be a common fix: Wireless does not work on my Presario R3000 although SUSE 11.x lists the hardware in the Hardware Information list and the hardware is turned on. Network Manager doesn't display any wireless networks in SUSE while Win 7 can see 4 of them on the same machine. Ubuntu has no problem either
View 1 Replies
View Related
Feb 2, 2011
I have searched and have not found anything specific to my issue. I am currently using NDISWrapper to load the bcmwl15 driver and when it's active it works beautifully.Problem is sometimes at boot, the card doesn't "turn on" and I don't know how else to describe it. The OS does not even detect that the hardware is present. I have disabled wireless hotkey in BIOS. The only way to make the wireless card "active" is to reboot with the wiredconnection to the router. After doing that the wireless card "wakes up" and works awesome.Is there anything I can do to make sure the driver load at boot?mes I get the error that NDISWrapper is not modprobbed when I go to network configuration and if I wish to do i now? I don't know if that has anything to do with the boot sequence. Using the <modprobe ndiswrapper> command as root does nothing permanant
View 9 Replies
View Related
Feb 6, 2011
Just installed 11.3 on a older Dell Dimension 8200 with a D-Link DWA-160 N dual band USB card. The install went ok and the card works (seems a little slow right now but that is next on the list). However, when I run YOU I get the following conflict:
"compat-wireless-kmp-default-2.6.37_k2.6.34.0_12-17.1.i586 requires kernel (default:drivers_usb_core)=6faa2c62dac4f41d, but this requirement cannot be met. Uninstallable providers: kernel-default-base-2.6.34-12.3.i586[openSUSE-11.3 11.3-1.82]"
when the system wants to install patch:Kernel-3038.noarch and patch:Kernel-3709.noarch. I cannot seem to find a suitable provider for the default:drivers_usb_core. Is this something to address here or do I need to go to [URL]?
View 1 Replies
View Related
Feb 17, 2011
I am running openSUSE 11.3 updated with all the latest patches and I cannot connect to my wireless router. I am running Linux Mint 10 on the same type of notebook HP Compaq 6910p and it worked right after the install. If I take off the security WPA & WPA2 Personal I can connect. lspci -v | less shows this for my wireless card.
10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Subsystem: Intel Corporation Device 1000
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at e4000000 (64-bit, non-prefetchable) [size=8K]
[code]....
I am using the same settings for both notebooks just can't figure out why openSUSE 11.3 won't connect. I get the prompt to key in my password, I've even checked the box to show password to make sure I was keying it in correctly. Everything was good but it just goes right back to the password prompt after it fails trying to connect.
View 3 Replies
View Related
May 3, 2011
when it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).
View 7 Replies
View Related
May 24, 2011
i read the sticky post on here about how to try and get my wireless card working.
i have installed opensuse 11.4
i followed step 1 of post and got following: /usr/bin/lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]...
View 9 Replies
View Related