I use Ubuntu 9.04. Synaptic Software Manager > Repositories > Reload. I have a following error.
GPG error: [URL]... karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 7804AF9D95075E6E. What can I do?
My software sources some how got screwed up. Now when I try to install from software manager or Synaptic, I get error messages. Here is the error messages at the bottom of "sudo apt-get update" :
W: GPG error: http://archive.ubuntu.com lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: GPG error: http://archive.canonical.com lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
How do I fix this ?
When I try to do
[code]...
I've tried the method described here: [URL]... However, I'm still getting the same error.
When I go to the Update Manager to update my system I get the following error message: W: GPG error: http://packages.medibuntu.org lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 2EBC26B60C5A2783
I am not sure what this exactly means and what I need to do to fix this.
I'veopenoffice.org 3.0. I tried to upgrade it to oog3.1 via terminal by the command sudo apt-get update && sudo apt-get install openoffice.org 3.1 my terminal shows; the lines above these are not shown W: GPG error: http://ppa.launchpad.net intrepid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 632D16BB0C713DA6 W: You may want to run apt-get update to correct these problems Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package 3.1 I got the same results when I tried the commands with firefox 3.5.
View 2 Replies View RelatedWhy everytime I send apt-get update I got this error on the last lines? Reading package lists... Done W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8F91B0E6C862B42C Here is my /etc/apt/sources.list
[Code]....
When I try to install things I am getting lots of errors.
[code]...
What can I do to fix my problems? I also included a screen shot of the repositories in Software Sources. I been messing with BeachBit as Root and been toying with Ubuntu Tweak and so I think I messed something up on accident. Here is my list that I have too.
[code]...
Some index files failed to download, they have been ignored, or old ones used instead.
All the places online said to do this script - sudo add-apt-repository ppa:hel-sheep/pastie && sudo apt-get updatesudo apt-get install pastieAnother had a sudo upgrade in the middle, but essentially just that script above. Whenever I do that, my terminal hangs at -Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv 8B9B7F6B51298512D6B5A8993B9ADE3DE4CA452gpg: requesting key DE4CA452 from hkp server keyserver.ubuntu.comEventually I crtl c and it looks like its installing, but then stops and says -W: GPG error: http://ppa.launchpad.net maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 93B9ADE3DE4CA452
View 3 Replies View RelatedWhat does this lot mean:?
Code:
Hit [URL]
Hit [URL]
Hit [URL]
Fetched 557kB in 2s (198kB/s)
Reading package lists... Done
W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY EA8E8B2116BA136C
W: You may want to run apt-get update to correct these problems
(after typing apt-get update)
I'm trying to update Karmic to Lucid. I try to update Karmic to the most recent update before I upgrade I get this error.
W: GPG error: [URL] karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A9A06AEF9CB8DB0
We could not access our web site page on firefox or chrome or ie:
Firefox give us these error:
We also try on linux with wget to access it:
Here is the result:
I keep getting this error whenever I try to update or reload. Does anyone know how to get rid of this or fix it?
GPG error: http://repository.cairo-dock.org karmic Release: The following signatures were invalid: NODATA 1 NODATA 2Failed to fetch http://repository.cairo-dock.org/ubu...6/Packages.bz2 Sub-process /bin/bzip2 returned an error code (2)
i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
I just installed say with
Code:
sudo apt-get install epos
and everything went fine, until I tried to use it.
When i do
Code:
say hello
it gives me
Quote:
he~lo######~T
Could not open localsound device, error 2 Client side error: Could not set up a stream
I have ubuntu intrepid installed in one of the amazon servers , when i try to install any software using apt-get i used to get the following error.Code: E: Couldn't find package E: Some index files failed to download, they have been ignored, or old ones used instead.
View 5 Replies View RelatedWhen I try to play some OpenGL games, I get this error.How can I fix this? My graphics card is Nvidia, and I use the nvidia-current driver.Here's what it says under OpenGL/GLX Information. I don't know if this is the info you need, but oh well.
GLX_EXT_visual_info
GLX_EXT_visual_rating
GLX_SGIX_fbconfig
GLX_SGIX_pbuffer
[code]....
create a VM here with virsh. I've managed to create the XML file and got it to work properly, however running it is the problem. These are the errors I get error: Failed to start domain Cent-OS, internal error process exited while connecting to monitor: open /dev/kvm: No such file or directory ,Could not initialize KVM, will disable KVM support qemu: could not open disk image /media/55D123D9E79ABF54/VM/Cent-OS-5.5.img: Permission denied
I've tried setting SElinux to permissive mode.
Fedora 14 X64
hypervisor qemu
XML:
[code]...
When i install libdrm, i get the following error:checking for clock_gettime... no.checking for clock_gettime in -lrt... no.configure: error: Couldn't find clock_gettime
It seems that it cannt find clock_gettime function, but i find it as follow:
$ grep clock_gettime /usr/include/time.h
extern int clock_gettime (clockid_t __clock_id, struct timespec *__tp) __THROW;
I am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
View 5 Replies View RelatedWhen I run sudo apt-get update I get the following message at the bottom:
[Code]....
I have tried numerous ways to add the keys i.e: gpg --keyserver keyserver.ubuntu.com --recv-keys EF4186FE247510BE && gpg --export --armor EF4186FE247510BE | sudo apt-key add - However, I then get the following message:
[Code]....
i get the following error when i try to install autoten: root@Tex dan]# rpm -Uvh [URL]... curl: (6) Couldn't resolve host 'dnmouse.org'
error: skipping [URL]... - transfer failed from reading other posts, it sounds like a dns error, but i don't know what to do to fix it.
Whenever I run glxgears or glxinfo from an ssh or vnc session, I get "Error: couldn't get an RGB, double-buffered visual". I can run glx stuff fine on the console under KDE, but that's not practical for the intended users. I've tried updating drivers (it's a Dell R610 w/ Matrox G200ew videa), firmware, rpms, etc., even running ssh with -X or -Y, but to no avail.
View 9 Replies View RelatedI have a simple C program which uses ncurses library and I am having linker issues and couldn't get the program to link.
[Code]...
So I think the ncurses libraries are in place but gcc still couldn't link. I am totally stumped.
I noticed after upgrading my Dell D820 from 11.3 x 64 to 11.4 x64 that splashy seems to crash while trying to render the theme (while hibernating). Running a splashy test returns the same error: "Splashy ERROR: Couldn't splashy_start_splashy(). Error -10". Using the default theme instead or re-installing splashy does not make any difference.
View 2 Replies View RelatedMy problem is that I am unable to do a routine upgrade of packages. When I try to perform an upgrade, the following occurs:
Code:
$ sudo aptitude dist-upgrade
Reading package lists... Done
Building dependency tree
[code]....
If I try to install another package, I get the following message:
Code:
E: I wasn't able to locate file for the tzdata-java package. This might mean you need to manually fix this package.
E: I wasn't able to locate file for the tzdata-java package. This might mean you need to manually fix this package.
E: Internal error: couldn't generate list of packages to download
i found in some thread that Swap space wasnt really necessary for RAM of over 1 GB, and true to it, i wasnt using using much of my 4GB allocated for swap ever so i deleted it ( dunno if it was wise, but didnt face any problems when i first deleted). today, i found out from another thread on a way to extend the size of /home directory if it was on a seperate mountpoint, and if space was available on my hard disk.
i just had 1 GB allocated to home directory and it used to fill up quite rapidly (due to cache from google chrome). I made a backup of my home directory contents, and i deleted the /home partition through the Disk utility. Somehow i couldnt combine the two unallocated spaces under a single partition why is that? (My plan was to combine that 1GB and the 4GB from the earlier swap space to use a 5GB home partition.) then i restarted and ever since i have been seeing the Grub error,and am not able to access my operating systems normally. GRUB Loading stage 1.5 Grub loading, please wait Error 15 . i am attaching the results.txt from my system obtained by booting through a liveCD. Something tells me that the way ive been following has been a roundabout one or a very inefficient one. how can i restore my system to normalcy
Yesterday, I was doing some work (Don't worry, I didn't lose anything), and I restored a terminal I had open, and it completely froze! I couldn't do anything on the desktop, so I tried rebooting. Doing that resulted in an error when booting. It would say "bin/sh : Can't mount" or something like that (Can't quite remember) not too long after trying to start up, and it would leave me stuck with some weird terminal. The only command I know on this new terminal is reboot. What should I do?
Note that I just installed Debian two nights ago and it was working perfectly fine until last night...
The error says "/bin/sh: Can't access tty; job control turned off"
I'm playing with Fedora 12 and can't get GRUB to work. To boot, I've been using GRUB4DOS. While that works fine, I'd like to figure out what's wrong with regular GRUB 0.97. After the initial installation, GRUB came up on reboot, but it was broken -- it couldn't read the config file apparently, and no commands would work correctly. So I attempted to reinstall grub via the grub prompt. No matter what I do, or which hard disk I install GRUB on, I get "Error 18". I tried using the "grub-install" command as well as the prompt, and that did the same thing.
My system here is an ASUS M4A785TD-M EVO mo/bo. I've got four hard drives. Two 1TB SATA drives and a couple of PATA drives (300 and 500GB) on a Si608 controller card. Using the BIOS "BBS" boot menu, I can boot NTLDR and BOOTMGR off active partitions on any of the drives (with proper Boot.ini modifications to handle the change in drive order). GRUB4DOS works as well, and will boot Fedora 12 correctly off any of them (with proper menu.lst ministrations). But GRUB 0.97 that comes with Fedora just refuses to do anything other than say "Error 18".
I am trying to run i386 in gcc_test-suite using dejagnu runtest and it fails with error given below. I can see that gcc-dg.exp is in folder gcc-4.6-20100911/gcc/testsuite/lib, but runtest is not searching in this folder.
how to resolve this issue and run only i386 tests.
$ cd /gcc-4.6-20100911/gcc/testsuite/gcc.target
$ runtest -a -tool i386 -verbose
....
....
Looking for library file /usr/local/share/dejagnu/lib/gcc-dg.exp
[Code].....
I am using Gslapt version 0.5.2b with slapt-get 0.10.2c and when I try to update I get this error message.
Code: Failed to download: FTP: couldn't retrieve (RETR failed ) the specified file. I have tried http ones also but get the same message except instead of FTP: it is HTTP:. Is anyone else having this problem? Are the repositories experiencing difficulties? Is my personal system to blame? Am I an idiot?
