I have a simple C program which uses ncurses library and I am having linker issues and couldn't get the program to link.
[Code]...
So I think the ncurses libraries are in place but gcc still couldn't link. I am totally stumped.
I am trying to compile a software using a provided sdk. I suspect that the sdk has some mismatch of the platform library, but I am not sure.
The error I got is
Code:
The libidata.so.42 is there in that folder. I guess the file might be in a big endian. Is there a way to check if the libidata.so.42 i have might be a big endian format, rather than little endian?
If my guess is incorrect, This is a c++ code on fedora x86 machine.
I am getting a linker error for a simple program to represent a singleton class.
Find below the program which I have written:
In linking a library in using GCC.
I am compiling Pro*C code.
When the maKe file start compiling if prints following :
Code:
I tried different options but unable to find the reason why it is not linking the libraries correctly.
I am using a arm compiler to build my program but getting following compiler error at the end -
init.c.text+0x2c): undefined reference to '__libc_csu_fini'
init.c.text+0x34): undefined reference to '__libc_csu_init'
Recently I have downloaded TBB and I want to run a program using its libraries. But I encountered the following error: Linker: fatal error LNK1104: cannot open file 'tbb_debug.lib'
View 1 Replies View RelatedI am having some trouble when I try to link my custom libraries to target executables. There are two libraries
liba
libb
and an executable exec based on main.o The library libb has some reference to liba. Now if I put the libraries in same directories, I can compile the code as g++ -o exec main.o liba.a libb.a But, if I put the libraries in different directories, say d1 and d2, and use the command as g++ -o exec main.o d1/liba.a d2/libb.a I get an error as undefined reference to some function in liba. I am not sure if I am missing some thing in linking process. Also, if libb doesnot refer any functions in liba, there is no error in either of the case.
I am facing some problems when i am trying to link using g++. The linker error text is "undefined reference to `std::vector<std::string, std::allocator<std::string> >::end()'"
View 3 Replies View RelatedI had return a driver for receiving and transmitting packets for the ethernet controller named rtl8139.I want to test it by writing an application program (socket programming).But I am unable to link it with the interface. Can anyone help in this regard?
View 1 Replies View RelatedI'd like to get path of one library to link it dynamically in my program. Probobly the best way would be to add macro to my configure.ac file.
View 2 Replies View RelatedI'm having a bit of trouble with a regular expression I'm trying to write and I'm not sure if it's something Tcl specific or my lack of regexp understanding.
[Code]...
I get a number of strings passed to a proc in the format 3|x where x is a number, either 0 or within the range 5-12. My understanding is that that regexp will match the literal '3' followed by a '|', the escapes the special meaning of |, and then 0 or, because of |, a number within the range 5-12. However I'm getting the error 'couldn't compile regular expression pattern: invalid character range'.
I first found something called lds(linker script) file.
And now I am willing to do a test with __attribute__((section)) to make a function stay in a private section. Sounds fun to me.
Part of my source code looks like this
By objdump, I didn't find a section called "my_own".
I need to compile a program and make it portable to other computers, but it needs some external libraries and I don't want them to be linked dynamically, I would like to compile them as one single executable or at least compile them in the same directory as the main output files. The program is sphinx>, it has its own configure and make scripts. I know I can run g++ with the -static flag, but I don't know how to do this with make or configure. This is the ./configure --help output
[Code]....
I am having trouble linking the pthread library.I have -lpthread -lm as options for the GNU GCC compiler.
Build Log
Compiling: main.c
Compiling: matrix.c
[code]...
I wrote a program to create a link list
Code:
#include <stdio.h>
#include <stdlib.h>
struct node {
[Code].....
I am using g++ 4.5.2 I copied and tried a piece simple (Making a Class Writealbe to a Stream) program, from page 363 of book(C++ cookbook), Example 10-6 your can download and test by yourself [URL]
[Code]....
I did a ./configure and make and got this returned about 1/2 hr later:
Code:
undefined reference to `glDisable'
undefined reference to `glDisable'
undefined reference to `glutKeyboardFunc'
undefined reference to `glutSpecialFunc'
undefined reference to `glReshapeFunc'
And the oddest part is.... I passed --disable-gl to configure!
I'm trying to compile a file with the following line :
Code: gcc lesson2.c -o lesson2 -I /usr/X11R6/include/ -L /usr/lib/ -L/usr/X11R6/lib/ -L /usr/X11R6/lib64/ -lglut -lGL -lGLU -lX11 -lXmu -lm But i got the error : /usr/bin/ld: cannot find -lXmu
I'm using this to compile a simple OpenGL file, and if I remove lxmu (and lxi, wiche gives me the same error), it got the all clear, but when I tun my program, I got an "Segmentation fault" error (I think because of the missing librairies)... When I did a locate libXmu :
[Code]...
I am using OpenSuse 11.2 which I just installed. I was working on one QT application in OpenSuse 10.3 with few KColorButton in it and it was compiling fine under that dist. Now after copying the project to 11.2 environment , I can't make the project. It's now throwing linker error :
[Code]....
In the ordering of files I keep I need links to directories. Sometimes I even need to move directories to new locations. I have tried using symlinks, but they become dead when I move the directory they point to. I have tried hard links, but I haven't found any Linux file system that would support hard linked directories. How can I achieve that a complex structure of directories (currently with symlinks for directories and hard links for files) keep symlinks live when directories are moved?
- is there any utility that updates symlinks when a directory is moved?
- is there any Linux filesystem that supports hard linked directories?
- is there any good Linux interface to the new NTFS (the only file system I know to support automatically updating directory links, called directory junctions)?
I have been struggling to install courier-authlib. I have tried several version from 0.55 to the latest and I keep receiving the same error.
Linking libauthvchkpw.la
/usr/bin/ld: cannot find -linker
collect2: ld returned 1 exit status
make[2]: *** [libauthvchkpw.la] Error 1
[code]...
I have been googleing for the past week to try and resolve this with no joy. any help would be greatly appreciated. I am installing on CentOS 5.3 with config options as follows...
./configure --prefix=/usr/local --exec-prefix=/usr/local --with-authvchkpw --without-authldap --without-authmysql --disable-root-check --with-ssl --with-authchangepwdir=/usr/local/libexec/authlib --with-redhat
and when I run the make commands I receive the peceeding errors (above)
The following is the error in my program :
Here is my program...
Code:
Above is a code for UDP server which I am trying.
When I compile it I get following errors
Code:
I have the following code:
Code:
And it gives this error:
Code:
I am using the C++ compiler G++ to compile my programs on Linux Mint 8 - Gnome.
I recently installed QT and when I tried to compile a simple "Hello World!" program it gave me this error:
Quote:
This is the code in HelloWorldQt.cpp:
Code:
I have tried using GTK instead but I get a similar error.
I'm building my main program on SUSE using C, but the compiler returns the error below.
Code:
Here's my code to which the errors are pointing to:
Code:
I've created 3 files: swap.h and swap.c then make static library from it
Code:
Then I write 2 program to test this library: test_swap.c and test_swap.cpp
I compile
Code:
What's wrong with this in C++? And how can I make a library that can work both for any C and C++ program?
Here the source code
Code:
Code:
Code:
I was trying to get the ssid of WLAN through the following C program
What is the cause of this error?
I have a program which reads some parameters in from an input file before solving a differential equation. This program compiles fine, I'm using Numerical Algorithms Group (NAG) libraries to solve the differential equation so I'm also the NAG compiler called nagfor.
The namelist I have is declared as follows:
And the input file is:
When I run the code I get the following error message:
I really can't see what's wrong with this code.
Also, I'm using Fedora 11, and running the code in tcsh if this is relevant.
I am using Ubuntu 9.04 linux 2.6.28-11-generic. When I write a program that gives the "Segmentation fault" error, or when I send this signal (SIGSEGV) to a program, the "Segmentation fault" is shown and no core dumped. When I look for "core" file in the current directory, I can't find it, too.
View 2 Replies View Related