OpenSUSE Network :: Setup Internet Tracking On An 11.3 Computer?

Jul 15, 2010

Is there a good way to set up internet tracking on an openSUSE 11.3 computer? I don't want users visiting porn sites or any other nonsense, and if they do, I want to know about it. Is there a good program that the administrator can set up to report this kind of thing or at least track it? Obviously, this would need to track all websites visited regardless of the application/browser used, and would need to be completely inaccessible to users. I don't want them having the ability to turn it off or circumvent it somehow.

View 8 Replies


ADVERTISEMENT

OpenSUSE Network :: Setup An Internet Connection With 11.2?

Jun 23, 2010

I recently took a WIRED internet connection (from the people who provide cable TV) and switched from ubuntu to openSUSE11.2. . I am not able to set up an internet connection in openSUSE 11.2. I have been given a static IP, and the following info

subnet mask
gateway
dns server
alternate dns server

how do i setup an internet connection with these in openSUSE 11.2.

View 6 Replies View Related

OpenSUSE Network :: Computer With Two Ethernet Ports Share Internet?

Apr 9, 2011

I have a Opensuse 11.4 workstation that has two ethernet ports and I was wondering if there is the chance to use the other ethernet port as a switch to a Mac/PC?

View 2 Replies View Related

OpenSUSE Network :: Can't Setup Internet Connection Wired Or Wireless

Mar 11, 2011

I have just done a new install of the latest opensuse 32bit and for some reason I cannot connect to the internet, when I click on mange connections the vpn tag is highlighted and all the other tabs are grayed out and I cannot select them. So I can't setup a internet connection wired or wireless. I was just using Kubuntu and did not have this problem. My card is broadcom.

View 9 Replies View Related

OpenSUSE Network :: Setup An Apache Server On Computer Which Will Allow Browsing Of Files In A Specific Directory And Subdirectories?

Jun 13, 2011

I'm trying to setup an Apache server on my computer which will allow browsing of files in a specific directory and subdirectories, without needing any sort of authentication.

I've got the Apache2 server up and running through yast, and everything works fine as long as I try to point it to the /www/htdocs folder. However, I want to point it at another folder, which is on another partition. This partition is formatted as NTFS, if that matters at all (here's some background on some permissions issues I had with the NTFS partitions recently).

When I change the "Directory" setting in the Yast http server configuration utility to the directory on the NTFS partition I wish to use, attempting to access the server results in the following error:

Code: Access Forbidden: You don't have permission to access the requested directory. There is either no index document or the directory is read-protected. If you think this is a server error, please contact the webmaster.

Error 403
192.168.1.100
Mon Jun 13 23:43:29 2011
Apache/2.2.17 (Linux/SUSE)

View 4 Replies View Related

OpenSUSE Network :: Router Configuration - Get Computer To Share Internet With Laptop

Dec 29, 2009

I've just spent the entire night trying to get my computer to share Internet with my laptop. I have DSL Internet with the modem configured to bridge mode. On the openSUSE server I have two NIC's. When setting up the DSL (pppoe) it created a dsl0 which is using the NIC eth0. So now I have dsl0, eth0, and eth1 I configured eth1 for DHCP server. When I connect with my laptop using DHCP it gets an IP address just fine. However I can't access the Internet. I think my problem is in the Kernel IP Routing Table. Here is the output from /sbin/route -n

[Code]...

dsl0 obtains IP from ISP eth0 is set to DHCP although that confuses me because how can the same NIC have two IP Addresses? eth1 static IP 10.30.60.1

View 5 Replies View Related

OpenSUSE Network :: Adsl Modem Acting As A Bridge To My Router Setup - Connection - Internet Went Slow ?

Jun 19, 2011

I have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !

View 2 Replies View Related

OpenSUSE Network :: Mulit Server Setup \ Server Machine Has No Internet?

Mar 27, 2010

I want to set up the following server in open suse:dhcpopenldapnfs (to allow users to mount their home directories from the serverI started off with the openldap server. I configured it with dc=localdomain,dc=local as its domain. As the server machine has no internet. Though when I go to add a .ldif file with the following command

Code:
ldapadd -x -D 'cn=Administrator,dc=localdomain,dc=local' -f /home/base.ldif -W
It returns this

[code]....

View 9 Replies View Related

Ubuntu Networking :: Setup A Proxy Server Who Just Redirect The Internet Connection To My Second Computer?

Jan 9, 2011

I want to settup a proxy server who just redirect the internet connection to my second computer. I try Squid Proxy but its too complicated for me. Can you sugest me another more simple program to do what i want?

View 1 Replies View Related

Debian Hardware :: Mouse Tracking Error - Mouse Not Tracking Correctly

Jan 8, 2011

I had been running "Etch" and upgraded to "Lenny". Now my mouse is NOT tracking correctly. When I move the mouse and then press and release the 'ctrl' key to show where the mouse pointer is the circle indicators are not where the pointer is. I therefore cannot make any selections from menus as 'lenny' thinks the mouse is somewhere other than where the pointer is. Also are there keyboard hot keys that i can use to access the menus?

View 1 Replies View Related

OpenSUSE Network :: 11.2 Xen Bridged Networking - Setup Multiple DomU Through The Default Bridge Setup

Feb 4, 2010

Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?

[Code]....

View 1 Replies View Related

Ubuntu Networking :: Setup Network For Both The Internet And WUG At The Same Time?

Aug 27, 2010

There is 2 networks that I would like to be part of

a) Through my wlan0 --> Internet DSL

and

b) Through my eth0 --> WUG - PTAWUG

I can only get one of the networks to work at 'n time. The wlan0 works fine when I start my PC, but when I want to access the WUG I need to do the following command:

Code:

sudo route add -net 172.16.0.0 netmask 255.240.0.0 gw 172.24.6.177 dev eth0

with the above command, I can then access the WUG but not the internet through my wlan anymore.all data goes to my wlan as standard unless its on the 172.16.0.0 network

View 5 Replies View Related

Red Hat / Fedora :: Setup Wireless Network To Surf Internet?

Mar 6, 2010

I use Fedora 12 and I use Mobile Boradband to connect to the Internet on my laptop. I want to setup a wireless network using my laptop so that my roommate who uses Vista, can surf internet on his laptop. How can I do it?

View 1 Replies View Related

Ubuntu :: Cannot Connect To Internet - Setup Network Package?

Nov 21, 2008

I have a fresh install of ubuntu. I am trying to load some new packages but I think I need internet connection. The issue is I cannot connect to the internet I think I need to setup a network package so I can connect to the internet? This is the first time I have used linux.

View 3 Replies View Related

Ubuntu :: Setup Home Network With A File/internet Server

Aug 23, 2010

I'd like to set up my home network with an Ubuntu file/internet server. In addition, I would use this server to monitor internet traffic. What hardware/software would be required?

My current network is as follows:

Laptop 1 Ubuntu 9.1
Laptop 2 Vista
Laptop 3 XP
Desktop Ubuntu 9.04 (would be used as server)

All connected thru linksys wireless router to cable modem.

View 2 Replies View Related

Networking :: Setup VMware's Network Configuration For Red Hat Can Access Internet?

Apr 7, 2010

I installed and tested both Windows server 2003 and Red Hat 9.0 with vmware workstation7. After installing 2003 can access internet but Red Hat can't. I want to test squid proxy server, send mail server, webserver etc. So, I would like to know how to setup WMware's network configuration for Red hat can access internet.

Below link is the configuration of VMware network setup both Server 2003 and Red Hat.

Here is Red Hat Configuration:
http://i64.servimg.com/u/f64/11/74/16/17/linux10.jpg

Here is Windows Server 2003 configuration:
[url]

I am using wireless connection to access internet.

View 1 Replies View Related

Debian Configuration :: Complex Network Setup - RPI To Automatically Route Internet

Jan 26, 2016

I would like to update my network setup.

Today, I have an ADSL box which is my gateway to internet (192.168.0.1).

I have a Raspberry pi (RPI) which I use as a dhcp & dns server (192.168.0.2).

Recently my mobile phone operator installed a 4G antenna beside my home, and the bandwidth and latency are much better with my mobile phone than with my internet provider (ADSL).

I would like to install a wifi dongle on my RPI (I would get wlan0 & eth0 interfaces)

When RPI detect my shared phone connection (tethering) I would like RPI to automatically route internet:

- from authorized devices on my network to my mobile connexion (wlan0 -> mobile phone).
- from other devices to the standard ADSL internet (eth0 -> ADSL box).

I don't want any device to use the shared 4G connexion, best would be authorized devices to be selected by MAC address. How I should properly setup such a network ?

View 2 Replies View Related

Networking :: Unable To Browse The Internet Although The Network Icon Shows The Computer Is Connected?

Jan 31, 2010

I have recently installed Fedora 12 on my pc but I am not able to browse the internet although the network icon shows the computer is connected.

I tried the dig command and got the following message:global options +cmd; connection timed out; servers could not be reached;

View 6 Replies View Related

OpenSUSE Network :: Network Print Configuration - Can't Connect With 11.2 Computer

Mar 27, 2010

I have a Canon MX860 network printer but I cannot get it to connect with my openSUSE 11.2 computer

View 9 Replies View Related

OpenSUSE Network :: Unable To Setup 10.3 As Samba PDC - The Network Path Was Not Found

Jun 1, 2009

I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.

View 7 Replies View Related

OpenSUSE Network :: Setup As A Network Boot Server To Install Solaris 10 On A Sun Ultra 10 Client?

May 12, 2011

I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?

View 3 Replies View Related

OpenSUSE Network :: Setup Xen Virtual Nodes We Encountered One With The Network?

Jan 26, 2010

while trying to set up Xen Virtual Nodes we encountered one issue with the network (which is why it is posted here On the DomU the interface is provided by a bonding -bond0- of three NICS. Now the Xen network script a) does not take this bonding b) destroyes even this bonding From a number of posts I assume I have to configure this by hand, correct? Is there an instruction how to do this? Simply create a bridge on top of bond0??

View 1 Replies View Related

OpenSUSE Network :: Masquerad Internet Using Knetwork Manager - Share The Internet Connection To A Desktop

Jul 5, 2011

OpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.

It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.

View 7 Replies View Related

OpenSUSE Network :: Network Manager And Static IP Setup?

Jan 12, 2010

I'd like to have a set up where my Ethernet card has a static IP set up but my WiFi card doesn't.Currently I have a profile for this set up in Network Manager, however on boot up and every time I replug the cable Network Manager chooses the default "auto eth1" profile. I manually have tochoose my own profile for the Ethernet card every time. How can I make it default??I know the workaround would be to use ifup but then I lose the ability to quickly change access points for my WiFi card so that's not a solution for me

View 9 Replies View Related

OpenSUSE Network :: 11.2 Couldn't Setup Network On Install

Jul 4, 2010

I've just installed openSUSE 11.2, one problem is suse didn't find an internet connection when suse performed the ..."automatic system configuration. This routine attempts to configure your network and Internet access and sets up your hardware"... Where can I manually configure the network. I'm in the network folder now no luck. I've been using every documentation I could find Novell Documentation and DVD installation/11.2 - openSUSE Network Status: Unknown network status

View 9 Replies View Related

OpenSUSE Network :: Setup A Network Printer In 11.3 64 Bits?

Dec 16, 2010

I successfully added/shared a network printer in SUSE 11.3 32 bit, but when I try on the 64 Bit box it didn't work out very well.What ports need to be open ? Is it necessary to open port 631 in YAST->Firewall->Advance- >UDP and IPP ?(TCP 631 already open) What services need to be running? Here is the error log :

[16/Dec/2010:19:25:43 -0500] [cups-polld xxx.xxx.xxx.xxx:631] CUPS-Get-Printers failed: Forbidden
XXX is my server IP

View 1 Replies View Related

OpenSUSE Network :: Internet Connecttion - Cannot Connect To The Internet?

Apr 12, 2010

I installed Suse 11.2 on clean HD. I cannot connect to the internet. Seems like Suse didn't install drivers for on board ethernet card. It is a Marvell Yukon 88E8056. I'm new to this and don't know how to install the drivers.

View 3 Replies View Related

OpenSUSE Network :: Cable Internet To 4G Internet Conversion

Sep 10, 2011

I have SUSE 11.0 set up to act as a router/firewall for my home network to the internet through a cable modem attached to an Ethernet card. When I was laid off several years back, I found information that let me connect my network to an ISP via a standard serial modem. I am considering going to the Sprint U1901 4G USB modem and dropping cable internet. Sprint claims the U1901 is Linux compatible. My thoughts are that using the 4G modem should be similar to the old dialup modem. I had a script that connected to the internet whenever internet traffic was detected. Unfortunately, I did not save notes on what I had done to setup the modem to dial automatically, and I have been unable to locate information that seems good to set this up again. I already know that all I had to do to get routing working was simply replace the internet port in the firewall/routing script with the port for the modem. So I assume that is rather trivial.

Would you please point me to a doc, perhaps SuSE specific, that gives reasonable directions on how to set up a "dial on demand" ISP connection? I assume that the 4G modem will be very similar to my old serial modem so that a dial on demand script will work. I did find a dial on demand howto, however, it did not seem to apply.

View 3 Replies View Related

OpenSUSE Network :: Unable To Setup Network

Feb 19, 2009

I am unable to do my network setup. I have a lan connection. I used to easily setup it in windows xp in network connections > internet protocol > properties. But I do not understand anything in linux. I have installed latest version of open suse 11.1 and KDE environment. Secondly I am unable to play mp3 files on it and I do not hear any sound at startup too. I *945* motherboard with a inbuilt realtek lancard and it is working fine on windows.

View 3 Replies View Related

OpenSUSE Wireless :: Computer Crashes When Connecting To Internet?

May 20, 2011

This problem started a few days ago. Whenever I attempt to connect to a wireless connection via network manager, my computer completely crashes, going to a black screen with no input from keyboard or mouse. It forces me to reboot using the power switch. Everything works fine when I connect to an ethernet cable, so I am sure it's a problem with my wireless driver.

I already tried (successfully) reinstalling the ath9k driver via compat wireless as was the advice from other forums, but this had no effect. I'm currently running opensuse 11.4, and haven't had this problem until a few days ago

This problem seems a bit ridiculous for a task as simple as connecting to a wireless network, so I'm convinced that either there is some sort of relatively simple way of fixing it, or windows really is the only decent operating system out there..

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved