OpenSUSE Network :: 11.2 Couldn't Setup Network On Install
Jul 4, 2010
I've just installed openSUSE 11.2, one problem is suse didn't find an internet connection when suse performed the ..."automatic system configuration. This routine attempts to configure your network and Internet access and sets up your hardware"... Where can I manually configure the network. I'm in the network folder now no luck. I've been using every documentation I could find Novell Documentation and DVD installation/11.2 - openSUSE Network Status: Unknown network status
I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.
while trying to set up Xen Virtual Nodes we encountered one issue with the network (which is why it is posted here On the DomU the interface is provided by a bonding -bond0- of three NICS. Now the Xen network script a) does not take this bonding b) destroyes even this bonding From a number of posts I assume I have to configure this by hand, correct? Is there an instruction how to do this? Simply create a bridge on top of bond0??
I'd like to have a set up where my Ethernet card has a static IP set up but my WiFi card doesn't.Currently I have a profile for this set up in Network Manager, however on boot up and every time I replug the cable Network Manager chooses the default "auto eth1" profile. I manually have tochoose my own profile for the Ethernet card every time. How can I make it default??I know the workaround would be to use ifup but then I lose the ability to quickly change access points for my WiFi card so that's not a solution for me
I successfully added/shared a network printer in SUSE 11.3 32 bit, but when I try on the 64 Bit box it didn't work out very well.What ports need to be open ? Is it necessary to open port 631 in YAST->Firewall->Advance- >UDP and IPP ?(TCP 631 already open) What services need to be running? Here is the error log :
[16/Dec/2010:19:25:43 -0500] [cups-polld xxx.xxx.xxx.xxx:631] CUPS-Get-Printers failed: Forbidden XXX is my server IP
I've installed the Ubuntu 10.04 Server onto a PPC G4 Mac just for the experience of setting up a server. During the installation process Ubuntu couldn't auto-configure my DHCP Network. I'm using the airport card on a wireless network. How can I manually configure the network once Ubuntu is installed.
I am unable to do my network setup. I have a lan connection. I used to easily setup it in windows xp in network connections > internet protocol > properties. But I do not understand anything in linux. I have installed latest version of open suse 11.1 and KDE environment. Secondly I am unable to play mp3 files on it and I do not hear any sound at startup too. I *945* motherboard with a inbuilt realtek lancard and it is working fine on windows.
I have installed openSUSE KDE 11.3 on my notebook. Everything looks great, but I can't connect on internet. It looks like dhcp don't work. Wireless works fine, only auto eth0 don't work.
Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
I first tried an upgrade from 11.3 to 11.4 and lost Internet Access, so i re-loaded 11.4 from scratch on clean partitions.
I am connected to my wireless WPA2/PSK connection, have an IP, am able to see the network.
I turned off and disabled the SUSE firewall.
I tried setting Firefox proxy settings to auto and to none, i dont use proxy.
I am currently posting this through an SSH connection to my 11.1 server from the new install of 11.4 on a Dell latitude D600 laptop (not using the on-board Broadcomm that is an issue for a later date).
I am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
Just installed 11.3 kde. When running the live cd both wireless and ethernet devices appeared in the network connections manager utility. I even connected to a wireless AP.I just booted up for the first time and none of these devices are available. There is no network manager icon in the system tray, and when the network manager utility is maually opened the only connection type i can select is vpn.I know that opensuse should be able to recognize these devices since they were available and working via the live cd, so can anyone help me restore them?
One extra piece of info, is that I am sharing a home directory with a gnome ubuntu install. there were a few minor issues i dealt with initially, but i didnt need to change this user's UID like I have had to do in the past so that's good. Each time i open a terminal I get two pieces of output assuming from the bash startup saying something like.URL...I highly doubt that these problems are related, but figured I'd post. Also if someone knows the solution to that as well, that would save me a bit of googling.
Using Fedora 10, can anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
Cannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
Can anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
I am attempting to setup a network to network VPN tunnel between our main office and a temporary location. This location need full VPN access back to the main office's network.Anyhow we have spent about 3 solid days attempting to make this work without any great success. Here is our network scheme for these two devices.
Network A (Main Office) (OpenBSD using isakmpd) Network: 172.16.8.0/24 External IP: 1.1.1.1 (obviously not the real IP)[code].....
I have configured OpenSuSE 11.1 in VirtualBox and Networking was working fine and I was able to access network. Yesterday I recieved update notification from SuSE and updated machine. Now after restart eth0 is not comming up. In Hardware profile I can see Network Card but it is not configured automatically. I don't know how to configure it. Virtualbox Networking was working before latest update and just tried in other virtual machines.
I have an HP OfficeJet 5610v installed on my system, and cups can print the test page. I can also get the test page to print via [URL] which appears to be printed under the anonymous user. Now if I attempt to print the test page via the printer control panel from windows, I get the following sets of error:
D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied. D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb requires write access to USB device nodes. D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied. D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb requires write access to USB device nodes. D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb couldn't open USB device /dev/bus/usb/003/001: Permission denied. D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb requires write access to USB device nodes.
CUPS is showing that the "user" is my XP login name so I added that user to Linux and even added that account to the "lp" group and still get the above errors.
I've currently got a Xen box with 3 Virtual machines on it, in a routed setup. I'd like to put them all on a private internal network as well, which I'm assuming I'd do with a dummy network card and a xen bridge, but I can't find any information about setting up the xen Bridging setup on top of the existing network-route instlal.
i've just setup a vps server with 11.4 everything is almost look fine now, but i couldn't setup a nameserver, i've searched on the internet about that but directories is different in suse. anyway i registered a domain on onlinenic yesterday and i want to use this domain as a nameserver and my hostname. how can i do that ? and do i need to have at least 2 ip for that ?
I just installed Opensuse 11.2 today and I'm eager to start downloading and customizing, but I can't set up a network. I originally installed it with the GNOME desktop, and when I opened firefox i could only connect to [URL]... and [URL], other websites timed out, even if i got to them via search results or URL.
Now, I reinstalled using the KDE desktop because after a little thought I preferred it, but now I can't even connect to these search engines at all. I don't know how to configure the network! It's through the onboard ethernet port, ethernet cable direct to modem.
I have a printer/scanner/fax that's on the network. i have the printer part set up through cups but how do I set up the scanner? What programs can I use on opensuse to see the scanner?
I have several Windoz machines in a peer-to-peer network and now two SUSE machines, one 11.1 and another 11.2.I have a network printer accessible now to all the machines.My next step is to be able to share files between all the machines and several network drives. I know how to set this up between the Windoz machines, but the only way I can get the SUSE machines to see the network (and be seen) is to shut down their firewalls, and I don't think that's how you are supposed to do it?Can someone point me to what it is that I need to read, or is there a FAQ somewhere to help get me started?
I think that this has something to do with Samba and I installed Samba (client or server? I forget) on the 11.1 and 11.2 seems to have it already built-in, but I don't know how to set it up with the firewalls on the two Linux machines so that it is all seamless (as if anything can be seamless).
My Samba setup works just fine however whenever I do stop/start/restart. I get these errors in the logs: Jan 17 00:21:14 neutrino smbd[4297]: smbd_open_once_socket: open_socket_in: Address already in use Jan 17 00:31:20 neutrino smbd[4557]: [2010/01/17 00:31:20, 0] smbd/service.c:1009(make_connection_snum) Does anyone know what to think of these? My thought is since it works just ignore and probably the SuSE team will get to cleaning this up sometime.
Just loaded Open SUSE EDU L I F E 11.2.2 on a Server and like what I see. The install went well and everything came up fine. I like the look and feel of this distro. The GUI features are impressive. Internet connects via eth1 . Sound, CD/DVD works and plays ok/ , grapics all working. I have two NIC cards installed.I am preparing (learning , testing, exploring) with a number of Servers that I want to take to schools in Africa.One of the key components that I need to get up and working is the LTSP. I was delighted to see that this version includes EASY-LTSP with a KIWI component. [SUSE KIWI-LTSP] So I printed out the LTSP/Quick start/Easy-LTSP (Guide) and tried to set up LTSP on my server.I went to KIWI/Prebuild in the Easy-LTSP presentation page.A box popped up with this info:
I am experimenting with Xen with the standard kernel (kernel-xen package) and utilities. I already got bridged setup to work with a single domU, but found out that because of my wireless card I cannot expect bridging to work when connected wirelessly. Now I am trying a NAT setup but I cannot seem to get any network connection from the domU to the dom0 and viceversa. Comparing the network devices and routing tables of others, I cannot see any problem.
The domU runs with IP 10.0.0.1 and the dom0 has a vif with IP 10.0.0.128 with a default gateway of 10.0.0.254. Pinging from the domU to the dom0 and viceversa does not show any traffic at all when I use tcpdump to monitor eth0 in the domU or the vif interface in dom0. It seems that basic connectivity of the vif interface and eth0 in the domU does not work. Any tips on how to debug this problem?
We have installed "openVPN" from openSUSE 11.2 repo and "openVPN - webmin module" (GUI).What it needs to be done .. "Road Warriors" need to be able to access websites through openSUSE box sitting in the data center, from remote locations (hotel, coffe shops, wi-fi hot spots,..)We're half way there but it gets stucked somewhere with the IP's
