I've been having trouble with a newly configured server running on Ubuntu 10.04.1.
I can login fine via SSH the first them. Then if I want to open another session from another terminal tab, I kicks me right away. The server shows me the greeting message but then the connection immediately closes.
I can't seem find any info on this.
I tried to install vsftpd on my server and while the installation went fine, I can't run
Code:
restart vsftpd
As I the get error
Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
I am using Squeeze and all appears OK at first... I have a DHCP lease, PING to router works, apache servering fine in and outside the network, Epiphany seems to connects to default debian.org only, BUT I cannot connect to any other websites and apt will not connect to any servers. I installed once, tried to fix problem, gave up and reinstalled and still have the same problem.
I unistalled Network Manager thinking that was the problem, but still the same issue. Is there a default firewall blocking certain connections or am I missing something I'm supposed to know about? I installed some non-free firmware in the beginning of install and all worked... and I connected fine when downloading packages during install.
Problem with my Internet connection. I can't connect to the update servers. I don't know why. It's a brand new installation, not a week old yet. I can't install the support for restricted media for example. The servers won't refresh in YaST. It tells me it can't download the repomd.xml.asc.
The other problem is that some servers on the web won't load for me either.
For example, I get most of my local news from The Toronto Star, and I can't connect to it's website at all.
I can from Windows (I dual boot) but not SUSE. I don't think its a problem limited to that one website either. I am able to connect to most websites though.
This is the result of zypper repos -d
Code:
I need ssh to connect to other servers, but I want to disable the sshd server on Ubuntu 9.10 because I don't want incoming connections to my workstation.
Disabling sshd won't effect my ability to use the ssh client to connect to other servers, correct? How do I go about disabling the ssh server on Ubuntu 9.10?
I am running Ubuntu Server 10.04 on an old desktop PC. But after some uptime (not sure exactly how long) it simply loses connectivity. Odddly, I can get on to the Server (Plug a monitor and keyboard in) and connect out (ie use lynx to go online or ping various websites) but I can't connect in from anywhere. I can't connect on the same LAN and I can't connect to it from the WAN IP address.
I have http, squid http proxy, webmin, and ssh running. I can connect to none of them when this happens. I am using ufw (I don't need the versatility of iptables... too complicated for my needs). ummm I can't think of anything else extremely pertinent....
I just recently installed ubuntu 11.04 server on an emachines etower, 400MHz intel celeron, 256MB RAM. I've tried installing apache2 and python3, but cannot get it to connect to the internet. while I understand how to work in a command line, I'm not sure what to do to diagnose the problem. I can list all the packages if it would help. (it's a fresh install so far), as well as the ethernet statuses (two cards for a firewall type setup)
View 5 Replies View RelatedI'm using ubuntu 10.04 LTS I install mysql..Code: sudo apt-get install mysql-server.I set up my password and confirm,I type mysql at the terminal and i get this back.
View 1 Replies View RelatedI'm using VSFTP in my ubuntu server and I want FTP to show me only the /var/www directory and its files/sub-directories. How can I do this? This has to do with vsftp.conf?Also I've read is recommended to make a user only for FTP, thus limiting its access to the desired directory. How can I do such thing?
View 1 Replies View RelatedI have openssh installed and it works great right out of the box. However, I don't want people accessing everything on my machine. My machine is behind NAT and ufw firewall. I have configured both so that port 22 is open. I've added the new users I want to have limited access and assigned them to group "sambashare" (just because its convenient.)
When the bottom bit of my config file "/etc/ssh/sshd_config" is set as shown below, everything works great:
Quote:
#Subsystem sftp /usr/lib/openssh/sftp-server
Subsystem sftp internal-sftp
UsePAM yes
Match Group sambashare
[code]...
Whenever I make the change to enable "ChrootDirectory" so that it limits the users access, I simply remove the # and it looks like this:
Quote:
#Subsystem sftp /usr/lib/openssh/sftp-server
Subsystem sftp internal-sftp
UsePAM yes
Match Group sambashare
[code]...
However, thats when I start running into problems. When I try logging in with Filezilla; I am not able to connect and this is the response I get from Filezilla:
Quote:
Status: Connecting to ##.###.###.###...
Response: fzSftp started
Command: open "user@##.###.###.###" 22
[code]....
Error: Could not connect to server
I'm trying to set up a private irc server. I install ircd-ircu, modify the configuration file, restart the daemon, and everything works great. After the next server reboot, the server shows the daemon is running, but I can no longer connect to the server from my irc client. I've tried restarting the daemon with no luck. I can then uninstall and reinstall it with the same outcome. Everything works initially, but after rebooting, the irc client can't connect..
View 1 Replies View RelatedMy school are cutting costs.I suggested they go open source.They said if I could find out how then they would consider it.Basically they want a mixture of windows and ubuntu clients.What I would like to no is how a ubuntu machine can connect to a server (SAMBA I think) so that it can access our home folder like the windows machines do.
View 1 Replies View Relatedwhen i fisrt signed up for this forums i accidently posted this same topic in the first place i found apropriate(network/wirless) and i just realised i didn't look hard enough so i marked my old post as solved, please admin delete that one. ubuntu server 10.04 LTS running ubuntu desktop on top(for my lack of skill)ok nitty-gritty. i have been learning to use linux for a few months now and i like it but i cannot access my server through WAN on any ports, yes i have them all open and enabled and associated on my router properly. i even tryed turning off firewall on here and i have tryed a list of misc. things. is there something i am not doing that one might initialy do when first starting an ubuntu server?
View 9 Replies View RelatedI am setting up my first server (which will be a file server when complete). I have some experience with a terminal, but not much. I'm not at all afraid of it, and want to learn more (one of the reasons I'm doing this project). At the moment I am trying to get the server to see my network. Using the info I found here: URl... I have been able to ping the router. I cannot, however, reach other computers on the network. Nor can other computers ping the server.I am looking for a newbie guide on how to connect to my local network.
View 9 Replies View RelatedDoes anyone know, or have any experience with, what the best way to set a network interface on a linux server to be up - so that virtual machines can bridge through the physical interface, but not allow anyone on a network to connect to the server itself? Thank you
View 1 Replies View RelatedI just set up my first server in my home with Ubuntu Server Edition, and I'm in the process of installing Jinzora on it. However, I cannot access the server through my web browser like I believe I should.Is it not just URL...?I am very much a server newbie, do I need to install another application to view my server in a web browser? I am able to connect through SSH just fine.
View 3 Replies View RelatedI have installed transmission on a headless server. I am using transmission-daemon and connects to the webclient on the LAN. However from WAN I can't connect. I have forwarded port 9091 in my router and it connects with the server, but I get 403: Forbidden.
Here is my settings.json file:
Code:
{
"alt-speed-down": 500,
"alt-speed-enabled": true,
"alt-speed-time-begin": 480,
"alt-speed-time-day": 127,
"alt-speed-time-enabled": true,
"alt-speed-time-end": 0,
"alt-speed-up": 10,
"bind-address-ipv4": "0.0.0.0",
"bind-address-ipv6": "::",
"blocklist-enabled": false,
"dht-enabled": true,
"download-dir": "/data/download",
"download-limit": 1000,
"download-limit-enabled": 0,
"encryption": 2,
"incomplete-dir": "/var/lib/transmission-daemon/info/Incomplete",
"incomplete-dir-enabled": false,
"lazy-bitfield-enabled": true,
"max-peers-global": 200,
"message-level": 2,
"open-file-limit": 32,
"peer-limit-global": 240,
"peer-limit-per-torrent": 60,
"peer-port": 20683,
"peer-port-random-high": 20500,
"peer-port-random-low": 20599,
"peer-port-random-on-start": true,
"peer-socket-tos": 0,
"pex-enabled": true,
"port-forwarding-enabled": false,
"preallocation": 1,
"proxy": "",
"proxy-auth-enabled": false,
"proxy-auth-password": "",
"proxy-auth-username": "",
"proxy-enabled": false,
"proxy-port": 80,
"proxy-type": 0,
"ratio-limit": 0.2500,
"ratio-limit-enabled": true,
"rename-partial-files": true,
"rpc-authentication-required": true,
"rpc-bind-address": "0.0.0.0",
"rpc-enabled": true,
"rpc-password": "password",
"rpc-port": 9091,
"rpc-username": "transmission",
"rpc-whitelist": "127.0.0.1,*.*.*.*",
"rpc-whitelist-enabled": true,
"speed-limit-down": 1500,
"speed-limit-down-enabled": true,
"speed-limit-up": 50,
"speed-limit-up-enabled": true,
"umask": 2,
"upload-slots-per-torrent": 4,
"watch-dir": "/data/download",
"watch-dir-enabled": true
}
I have a openSSH server, it works to connect to it within the local network but I can't connect to it from the Internet. What I would like to do is to connect to the server using filezilla client, simply by using username and password.To make it secure from brute force attacks will I only allow connections from specific IP number.
I have a server with the static internal ip 192.168.1.5, port is 2222. My global ip is 10.4.5.6 and I would like to connect with filezilla client from ip 11.1.2.3. How do I connect?
I've looked everywhere for this (simple) problem, and I can't get this working. I have a mysql server on my LAN which is accessible from within the server.I want to access the mysql server from another computer on the LAN, but it never works.
View 7 Replies View RelatedI setup Ubuntu 10.10 (edubuntu) along with ltsp. I have an environment with a windows network (192.168.1.0) and a subnet (192.168.0.0) that the new terminal server is on. Everything seemed to be connecting properly, but when I attempted to boot the first client, I get the error message: "Cannot connect to NBD server".
View 1 Replies View RelatedI've got a server here with MS Exchange. The customer wants this website I've made for him, but the site is using apache/drupal/mysql.
I went ahead and installed debian in place of a virtual XP installation that was wasting space. It's all setup and running.
His old website, which was running on IISv6, is connected and able to access the MS Exchange server, via /exchange.
I need to be able to do this with his new website.
I have a webhost payed and i want to connect it with my server database. It shows me this error on the website : Lost connection to MySQL server at 'reading initial communication packet', system error: 110
I tryed to open port 22...noone of sollution work to me.or someone who's good on that???
I installed vsftpd in FC6 and made it started and listen. I can use ftp in local machine to connect ftp on another machines, but I cannot connect the ftp of local machine from other computers in the office (the same network). I can use ssh to connect the machine, so I don't think it should be a firewall problem.
But when I type ftp and the IP try to connect the ftp, after a long time show up:
ftp: connect: Connection timed out
I am trying to set up my computer as a server for things like minecraft and ventrilo. I cannot get anybody (myself included) to connect to the servers I set up. I think it has to do with my ports not forwarding properly, or the computer using ipv6 instead of ipv4 for some strange reason. I say this because I KNOW I set up the port forwarding in my routers setting correctly, but when i browse to a port checking tool, it says they are not. How can I get people to connect to my servers, which seem to be running and functioning?
View 2 Replies View RelatedI have slackware 13.1 version. When I use console I connect to ftp servers via ftp but not via sftp. I cannot connect to an ftp server with mc. I think that mc uses sftp. How can I make mc use ftp instead of sftp to connect to an ftp server?
View 2 Replies View RelatedA few days ago, I ordered a ubuntu server (on ovh.com). Everything was going well until I installed mysql: After the install, I tried to connect throught Navicat MySQL using SSH, but it says that the user or password it's not correct, obviusly this is not true. I've been reading and I readed that I have to open the 22 port to use MySQL in the firewall, but I don't know how to do it.
View 3 Replies View RelatedLast night i updated to 9.10, all good except i can no longer access my samba shares!!
here is the info from log.smbd after i stared it this afternoon
Code:
smbd version 3.4.0 started.
Copyright Andrew Tridgell and the Samba Team 1992-2009
[2010/01/12 16:35:57, 1] param/loadparm.c:6355(map_parameter)
Unknown parameter encountered: "executable"
[2010/01/12 16:35:57, 0] param/loadparm.c:7449(lp_do_parameter)
[Code]....
I'm going to load ubuntu server to a computer just for testing and learning. There is one ethernet card on this computer that will only be used occasionally to connect to the internet. This computer will not have any computers or routers connected to it. So my question is, once installed and running, will DHCP just sit quietly and wait for a request or is it going to complain a lot that it is not finding any other computers?
View 4 Replies View Relatedi have been havin a little trouble with my ftp server im using proftpd and have been able to connect to the box on local lan but it stops with an error about tls packet.
i have been following a guide on settin up my server [URL]...and have attached my config and error details