Ubuntu Servers :: Can't Connect On LAN And From WAN IP Address
Aug 30, 2010
I am running Ubuntu Server 10.04 on an old desktop PC. But after some uptime (not sure exactly how long) it simply loses connectivity. Odddly, I can get on to the Server (Plug a monitor and keyboard in) and connect out (ie use lynx to go online or ping various websites) but I can't connect in from anywhere. I can't connect on the same LAN and I can't connect to it from the WAN IP address.
I have http, squid http proxy, webmin, and ssh running. I can connect to none of them when this happens. I am using ufw (I don't need the versatility of iptables... too complicated for my needs). ummm I can't think of anything else extremely pertinent....
View 9 Replies
ADVERTISEMENT
Jun 1, 2010
I am running a server with Ubuntu 10.04 and mysql v.5.4.41-3ubuntu12.1.I am unable to connect to my mysql server remotely, (error 111). I have added the port 3306 to iptables. It is able to connect to the loopback address (127.0.0.1) but not through its external address.
View 2 Replies
View Related
May 5, 2011
I have a problem with my Terminal Server Client, I cannot seem to connect to any windows server via IP address. Can anyone please recommend any tool I could use to connect? I need to work on the server for admin interfaces example Admin Kits for workspace protection
View 9 Replies
View Related
Jul 20, 2011
what is Production IP address and Management IP address in Linux servers? What is the significance of these two? When to use what?
View 3 Replies
View Related
Jan 30, 2011
Is it possible to run two servers through one ip address? And I don't mean through apache to run virtual servers. Right now my set up is: Cable modem>router>server.
View 9 Replies
View Related
Sep 13, 2010
I have just made a change in my internet setup. I basically connected another router to the existing one and everything appeared to work fine until I went to a bookmark with www in the address and no, it does not connect. Trying some other pages and it really is the www that screws it up: For instance URL... does not work whereas URL...does. What is wrong??I could go back to the old setting but obviously i have a reason for the second router which is setting up a small network for printer and file sharing.
View 1 Replies
View Related
Feb 11, 2010
my local server here is not reachable when I type on the hostname so I am wanting to know if I am on the machine via ssh (I have a monitor and keyboard plugged into the tower)
How do I figure out what the servers IP address is? I have ubuntu server 9.10 and I looked at the etc/host, etc/hostname files and they have the correct server hostname
View 6 Replies
View Related
May 29, 2010
I tried to install vsftpd on my server and while the installation went fine, I can't run
Code:
restart vsftpd
As I the get error
Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
View 4 Replies
View Related
Jan 24, 2011
I have a school project that requries me to bypass MAC filtering by changing my MAC address.I changed my mac address through the following:
Code:
sudo service network-manager stop
sudo ifconfig wlan0 hw ether 00:11:22:33:44:55
[code]....
View 2 Replies
View Related
Jul 29, 2011
I have installed openvpn on an ubuntu 10.04 server. I run 11.04 on my desktop. It can connect to my VPN server. The problem is, I have ZERO internet access. I cannot even ping an IP address.
View 5 Replies
View Related
May 5, 2010
Two machines with Lucid installed last week, both installed with the same standard settings. One machine can see the network and both itself and the other machine, the other PC cannot see the first machine or itself. In the Network window all I get is a folder saying 'Windows Network' and clicking that ticks away for a minute or so before saying error, cannot connect to it.
On both machines I have created a shared folder on the desktop to trigger an installation of samba shares which has happened.I cannot connect to the other PC by entering its IP address into location either.
View 3 Replies
View Related
Feb 13, 2011
I have a problem with Samba. I've already configured my SMB.conf file, but I can't connect to my Windows shares by their host name. for example: if I try to connect to GDEA73-PC-1 share = netshare, server connection fails. if I try to connect to 192.168.1.171 then share = netshare, it works. How do I fix this? When I run findsmb, I am on the GDEA73 NETWORK workgroup as I configured, but my local PC is the only one on it...
View 2 Replies
View Related
Sep 13, 2010
I'm trying to connect to my home pc with ssh. I have road runner connected to a wireless router and then my pc connects to the router via a wireless card. I can use the Internet from my pc. I also know sshd is running. I do a ifconfig to get the ip address. Then, nothing happens when I try to connect to this ip address via ssh from a remote pc. So, what's going on with this? How can I get ssh to connect to the home pc?
View 5 Replies
View Related
Jan 22, 2010
I'm connecting to my wireless, but I can't connect to the Internet, not even via an IP address.
(*) Can not open web pages via IP address.
(*) Can ping internal hardware no problem.
(*) I can connect to the Internet via Ethernet no problem.
(*) I used to be able to connect via wireless on this computer. No settings changed in the interim.
(*) Several other computers currently connected & accessing Internet via the same wireless - no problem.
(*) Based on other posts, I disabled the avahi daemon, but this had no effect.
Outputs of some commands:
[Code]...
View 8 Replies
View Related
Jul 27, 2010
I recently setup motion on one of my computers with a USB camera. On that computer if I type [URL] I can see my live video. If however I type [URL] on that computer or any other on my wireless network, I get a page cannot be displayed. I checked that UFW was disabled and I am able to ping the motion computer from any other computer on my network. Also I am not sure if it matters but I do have apache installed on my motion computer as well. why I cant view my live video from different computers I am using Ubuntu 10.4 on all computers
View 4 Replies
View Related
May 27, 2011
I have been trying to wirelessly connect to my network for weeks now. My netgear dongle is fully working. I have installed the driver using ndiswrapper. I can see my network and signal is excellent; everything is working perfectly. When I try to connect it thinks about it but never connects. The password is fine; it works great with other computers. decided to have a go with wicd, so got rid of the Gnome network manager and installed wicd. Adaptor and wicd appear to be working brilliantly EXCEPT I cannot connect. wicd tells me its a bad password. Password fine because it works brilliantly with every other device I connect to my network. If I remove security from network, it tells me it cannot get address, even though it sailed passed that with no problem when there was security. I have searched the internet for a solution to this problem time and time again. Lots of people seem to be having this problem, but no one knows the solution. Is there a solution? It happens with both Ubuntu 10.04 LTS v1 v2 and Ubuntu 11.04. What the heck is going on. This happens with WPA WEP and anything else I try to use
View 1 Replies
View Related
Apr 26, 2011
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
View 4 Replies
View Related
Feb 18, 2011
I am using Squeeze and all appears OK at first... I have a DHCP lease, PING to router works, apache servering fine in and outside the network, Epiphany seems to connects to default debian.org only, BUT I cannot connect to any other websites and apt will not connect to any servers. I installed once, tried to fix problem, gave up and reinstalled and still have the same problem.
I unistalled Network Manager thinking that was the problem, but still the same issue. Is there a default firewall blocking certain connections or am I missing something I'm supposed to know about? I installed some non-free firmware in the beginning of install and all worked... and I connected fine when downloading packages during install.
View 4 Replies
View Related
Dec 8, 2010
My ISP allows only one computer so I have to change the mac address.
On the other computer I use ubuntu and I've changed my mac address with both ifconfig and macchanger. The internet still doesn't work, it doesn't find the connection.
What should I do ?
[URL]
View 2 Replies
View Related
Sep 30, 2009
Router: Linksys WRT54GS
NIC: D-Link DWA-645 (RangeBooster N 650 NoteBook Adapter)
i have successfully changed my MAC address. By doing:
ifconfig wlan0 down
ifconfig wlan0 hw ether AA:BB:CC:11:22:33
ifconfig wlan0 up
When I do:
ifconfig wlan0, it shows my new MAC address.
After changing, I cannot connect to the Internet. I have already disable mac filtering in my router. What did I miss out?
View 5 Replies
View Related
May 19, 2009
I am running 2.6.27.21:170.256.fc10.i686 on my laptop.
I am trying to connect to a network at a university in China right now and I cannot figure out how to connect.
IP: 192.168.213.179
subnet mask: 255.255.255.0
default gateway: 192.168.213.1
DNS: 202.202.96.33
DNS: 61.128.128.74
View 5 Replies
View Related
Mar 25, 2010
how to block any IP address who failed to connect more than 3 ssh?
View 5 Replies
View Related
May 12, 2010
i wanaa to config tlenet server and did the steps to enable it
but when i try to connect to server this error show :
telnet : connect to address 10.0.0.100 : No route to host
telnet : Unable to connect to remote host : No route to host
[URL]
View 10 Replies
View Related
Mar 15, 2011
In my working environment have 40 system .Its ip address is given manuallyto connect each for lan connection .40 are not using ubuntu while other using windows .My question is there any package to trace ips of entire system
View 9 Replies
View Related
Apr 9, 2011
I couldn't find an answer to this question (not including vpn) on different threads so decided to eventually post it, though it's probably easy one. I would like to connect to some application on known IP and port in the internet from my LAN computer. However to do so (I have some application, not any administrative constraints or not being allowed to) I would like to use local addresses. So, let's say - I want to connect to the external host VV.XX.YY.ZZ, port AA using 192.168.EE.FF port BB. Baically so far I have limitation in my application (too many places for possible error, to correct it right now - will change it in future). Is it possible that after my application sends request to 192.168.1.EE port BB, my Linux transparently translates it to VV.XX.YY.ZZ:AA? I tried iptables tutorials and some forums, but nothing seems to be addressing this issue. I don't know if it's event possible with iptables but am pretty sure this should be possible.
View 5 Replies
View Related
Aug 21, 2010
while configuring the yum through proxy i was configures with some address(10.x.x.x). after the proxy address has been changed(172.x.x.x).according to new proxy address i made changes in all locations in my system. but when i am trying to download through command line still it is trying to connect old proxy address(10.x.x.x). finally i come to know that, still some location old proxy address (10.x.x.x).is there.
how to troubleshoot this issue.(how to find the location) i was try to debug find the output below DEBUG output created by Wget 1.11.4 Red Hat modified on linux-gnu.
[Code].....
View 1 Replies
View Related
Jul 8, 2011
I am facing an error when I run the following command telnet localhost 7777
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
View 2 Replies
View Related
Apr 7, 2010
I reinstalled unbuntu server recently and i am trying to get it to only allow one computer to accsess it. So after doing this etc/ssh/ sudo nano sshd_config I uncomment #ListenAddress 0.0.0.0 Ok so i am trying to accsess my server from a windows machine so i tpyed ipconfig /all to find my ip I found the IPV4 address and i put that address like so ListenAddress 192.168.1.22 But when i try and connect it says connection refused.
View 6 Replies
View Related
Jul 21, 2010
I want to create script wherein it will check the application if its running. The command that I'll be using to check the application is telnet (if you can recommend others, that's ok). I've an application and it is listening to port 1808. If I do telnet localhost 1808, the response is :
Code:
[root@test ~]# telnet localhost 1808
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
What I want to happen is if the response is like to code above, it will execute a commands. Obviously, above code knows that the application is not working so I need to execute a commands. I created a script before using expect but I don't think it will work because I haven't establish a shell yet unlike successful telnet I could spawn expect.
View 5 Replies
View Related
Aug 29, 2010
I am using Ubuntu Server 10.04 64bit. I am getting an Apache2 start up error after I setup my certificates and configure Apache2 for HTTPS. At the point on start up where I need to type in my certificate pass code I get a lockup due to the Apache2 process being in a hung state. I reboot if needed and switch to console tty2. When I type in the command.
Code:
I get the following error.
Code:
To correct the problem I do this.
Code:
From the output of the command above I look for the apache2 process and make note of its process ID. Then, I kill that process ID. For example, the command below has an apache2 process ID of 1131.
Code:
Next, when I run this command.
Code:
The apache2 server starts up and asks for my certificate password, accepts it when I type it in, and runs perfectly fine afterward.
Fortunately this instance of Ubuntu Server is running inside a VMWare virtual machine. I can just "pause" the virtual machine if I need to rather than going through this crude and tedious start up process too frequently.
Crude and tedious are feelings I'm having too frequently lately with Ubuntu Server.
View 5 Replies
View Related
