OpenSUSE Network :: Is Qinternet Or Smpppd Broken In 11.3 Final Version

Aug 3, 2010

I wished to use qinternet under openSUSE 11.3 to control multiple interfaces (a mixture of internet/intranet, DHCP/static IP), so I applied the same settings/tests which were successful for kinternet under open/SUSE 11.2: Selected options within Yast2/Network Settings: Traditional Method with ifupEnable Device Control for Non-root User Via QinternetYast2/System/System Services(RunLevel)/smpppd = "yes" From command line terminal:

[Code]....

Default state indicated by different icons. Interface option brought up by right-mouse-clicking on the qinternet/kinternet panel icon and choosing Settings/Various Settings/Startup tab. Note: Regardless of whether qinternet was running or not, internet communications via the relevant network interface still worked.

In case the failure of qinternet/smpppd was simply a PolicyKit issue, I edited /etc/PolicyKit/PolicyKit.conf to ensure that the relevant user had the necessary privilege to run smpppd (I assume that qinternet can be ignored since it is just the front end for smpppd) e.g.

[Code]....

This made no difference, SO FOR DIAGNOSTIC PURPOSES ONLY, I logged in as root after first removing the power from the network switches externally connected to each network interface (isolating the local host). I then ran qinternet but once again, the Interface option was greyed out. This confirmed fairly conclusively that lack of privilege was not responsible for the qinternet/smpppd problem.

View 5 Replies


ADVERTISEMENT

OpenSUSE Network :: SMPPPD Off - No Internet Connection

Sep 8, 2011

I have a pppoe dial-up ADSL internet connection and I've managed to set it up untill 11.4. Now, I've installed smpppd-1.60.46-2.1.x86_64.rpm and the dependencies. When I try to activate and check the work of smpppd, the following happens:

Code:
linux-xjr1:~ # service smpppd start
Starting SMPPPD done
linux-xjr1:~ # chkconfig smpppd on
insserv: FATAL: service network is missed in the runlevels 2 to use service smpppd
insserv: exiting now!
/sbin/insserv failed, exit code 1
linux-xjr1:~ # chkconfig -list smpppd
smpppd 0:off 1:off 2:off 3:off 4:off 5:off 6:off

Qinternet doesn't connect to the internet. It seems that something went wrong with smpppd, didn't it?

View 1 Replies View Related

OpenSUSE Wireless :: WiFi Setup And Missing SMPPPD

Feb 10, 2010

I have just completed the installation of 11.2 on a older HP Pavillon dv5115nr. Finally got everything working except for the Broadcom wireless. I have updated the firmware and I can see the AP. I have been using yast to configure the wlan device but one of the last steps it trys to perform is install smpppd. Even when hooked up via eth0 it can't find this program.

View 1 Replies View Related

OpenSUSE :: LXDE Changes Qinternet Display On Different Monitors?

Jun 25, 2011

The following describes odd behavior in my opinion, but I'm not sure where this question belongs. How can a monitor affect the loading of application SW? Can I get some help to fix the following problem here?I installed lxde on a P3 with a Gem 17" CRT monitor. LXDE runs on top of opensuse 11.4. On a P4 box I installed kde with 11.4, both from the same DVD. The P4 OS was installed using Vivitron 1776 17" CRT monitor.

Both boxes use qinternet for connection to DSL. Qinternet is set to autostart and its icon displays in the taskbar system tray. I bought a ViewSonic E70 17" CRT monitor for the P4 and put the Vivitron on the P3.Now the P3 displays the qinternet icon in a small terminal instead of loading it into the system tray as before. Of the three 17" CRT monitors I have, only with the Gem will the P3 (LXDE) system display qinternet in the system tray.The P4 system (KDE4) can run any of the monitors and still put the qinternet icon into the system.Qinternet is a binary file, but if i "less" it, I can see references to kinternet, so I think it's KDE4 SW. LXDE may be the culprit, or maybe the behavior will involve xorg

View 3 Replies View Related

Ubuntu Installation :: Firefox 3.6, Final Version Not Pre?

Jan 24, 2010

I would like to be able to install firefox without installing the "pre" version. I don't like running beta software for my primary browser. I already installed Namoroka, which is 3.6.1pre. Is there a repository I can add for this? I will already have to remove one of my repositories and remove firefox.

View 9 Replies View Related

Ubuntu Installation :: Upgrade To Final Version Of 10.10 Not Possible, Only Rc Is Available?

Oct 11, 2010

I try to upgrade from ubuntu 10.04 to 10.10, but there is no final version available when I press Alt + F2, only the release candidate. What is the problem here and what can I do?

View 6 Replies View Related

OpenSUSE :: Can't Get Qinternet To Auto Reconnect / When Connection Is Lost

May 14, 2010

i cant get Qinternet to auto reconnect when connection is lost due to dynamic IP changes from my ISP.Im using Ifup method.Thing is, every 24 hours, ISP changes my IP and thus, disconnects me from the internet. I need it to reconnect but dont know how to do it.

View 9 Replies View Related

Ubuntu :: Lucid - Will Beta Be Upgradeable When Final Version Is Released?

Apr 18, 2010

I am thinking about upgrading my home computer to the beta. Having been burned by Microsoft's RC program and reloading my kids computers, I wondering if I will be able to move to the final release when it comes out at the end of the month. If the upgrade path from Beta->LTS is a complete reinstall, I'll wait.

View 2 Replies View Related

Ubuntu :: Closed Source Version Of Java Plugin For 10.10 Final?

Oct 11, 2010

i need the closed source version of java plugin for ubuntu 10.10final for i can use pogo

View 1 Replies View Related

OpenSUSE Hardware :: Dialing USB Modem - Getting No Carrier Detected On Wvdial - Qinternet

Jul 17, 2011

I have a usb modem(A phone): Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270 HSDPA/HSUPA Modem It is recognized by Yast under modems.But I am getting No carrier detected on wvdial,qinternet and many I have tried with. Here is the output:

[Code]....

View 3 Replies View Related

OpenSUSE :: Firefox Update 3.6.8 Broken - Forced To Move Back To Version 3.5.11

Sep 8, 2010

bouncing icon and spinning icon in toolbar for 10-20 seconds, then nothing. Is there a special log file to be found for mozilla errors? (couldn't find anything useful in or near /var/log/messages or warnings all dependencies of associated programmes seem to fulfil dependencies, but obviously something isn't right. Does anyone else have the same problem?

[code]...

View 4 Replies View Related

Ubuntu :: Update Manager Will Upgrade My Current Beta Version To The Final Release?

Apr 19, 2010

I installed Ubuntu 10.04 beta a couple of days back.This is the first time I am using a beta release.Some programs are crashing, although not frequently.

My question is - WHEN THE FINAL VERSION OF UBUNTU 10.04 IS AVAILABLE FOR DOWNLOAD, IS IT MANDATORY TO DOWNLOAD THE ENTIRE ? OR WILL UPDATING OR UPGRADING VIA THE system ---- administration --- update manager will upgrade my current beta version to the final release ???

View 2 Replies View Related

OpenSUSE Network :: Openvpn Broken After Upgrade To 11.1

Jul 6, 2010

after I upgraded my SUSE 11.0 to 11.1 many problemes solved themselves. But now there is a new one.

I use openvpn, which always used to work without problems. After upgrading to SUSE 11.1 there is the error message:

"/etc/openvpn/client-suse.sh: line 7: modify_resolvconf: command not found
Wed Jul 7 00:11:38 2010 script failed: could not execute shell command"

The shell script is as follows:

Code:
#!/bin/sh
UPORDOWN=$1
DEV=$2
case $UPORDOWN in
up)
modify_resolvconf modify -s openvpn -p openvpn -t OpenVPN

[Code]....

View 4 Replies View Related

OpenSUSE Network :: Internet Connection Is Broken

Aug 10, 2010

Dell Precision Workstation running Suse 11.1 & KDE 3.5 as default O/S, with Suse 11.3 KDE4, Ubuntu 10.04 & Win XP Pro as secondary O/S's.Medion PC with Win XP Pro for those windows apps I have to use (against better judgement but because my clients require it!)

On Friday 6th I was having a play with Apache2 running on the Dell Precision on Suse 11.1. I have had a local development webserver for some time to test websites before uploading them a host server. I had wanted to test the DHCP & DNS functions for some time, and this seemed like a good opportunity. But I ran into some problems and decided to un-install the DHCP & DNS. I intended to install a VM and re-install the Apache server on it, to make it easier to troubleshoot.Unfortunately my internet connection on that box is now broken, but only with the Suse 11.1 install. The other 3 O/S's all work fine, and the rest of my machines are all good. In fact the Suse 11.1 install can communicate across the LAN, and print to both the network printers, it just won't connect to the Internet. Turning off the firewall doesn't do anything, and reconfiguring the NIC in YaST doesn't help.

I suspect that there is a config file somewhere with faulty info, but I can't find it. If searched everything that was changed on that date.I have been searching this forum, LinuxQuestions forums, and Googling for 2 days with no real success. I found some interesting threads which I thought would help but so far no luck. I can ping all the interfaces on my LAN, but anything outside is blocked. I thought it might be in the BT HomeHub but that works fine and all the boxes can connect except with the Precision running 11.1.

View 4 Replies View Related

Ubuntu Installation :: Complete Re-installation If I Want To Run The Final Version Of 10.04?

Apr 7, 2010

I ran Ubuntu 9.10 back in the days and when 10.04 Beta 1 was released I upgraded it by using the update-manager -d. My question is, if I use the upgrade-manager -d feature will it be like an actual beta 2 when it gets released and later on will it be the same as the full final version. Or must I do a complete re-installation if I want to run the final version of 10.04?

View 1 Replies View Related

Ubuntu :: Re-install Ubuntu 10.04 When The Final Version Is Released?

Apr 15, 2010

I'm currently on Ubuntu 10.04 Beta 2, is it on the safer side to reinstall ubuntu all over again when it's released or it doesn't make any difference ?

View 9 Replies View Related

OpenSUSE Network :: FreeNX / Nomachine NXclient - Thread (nxserver Now Broken?)

Sep 16, 2010

This thread (nxserver now broken?) has inspired me to install FreeNX and the client from nomachine on openSUSE-11.2 (this is the version used on both, server and client machine). The good news is: basically it works. I can connect and get the desktop. However, I have some trouble with the keyboard. Up and Down arrow keys do not work. The up arrow triggers a screen snapshot. The down arrow key does nothing. I tried to connect using qtnx as well. This does not work. Result is:

[code]...

View 3 Replies View Related

OpenSUSE Network :: Apache Virtual Hosts Broken After Deleting Log Files?

Feb 22, 2011

I run a dedicated opensuse 11.1 server with apache (2.2.10-2.9.1) installed. This box has been running for nearly 2 years hosting several low traffic websites. I must admit that I did not give lots of love/attention to the machine over that period. It ran rock solid. The different websites each have their own associated user account and are stored in their own /home/name/public_html/ folder. It was setup through Webmin. Each domain name is also linked to a unique IP (the box has multiple available IPs), however this is configured at my domain provider. All in all a very simple and straightforward setup that never let me down most of the past decade.

Recently the sites on the machine were no longer responding. This happens each other year or so since I write my logfiles to a separate partition. Was df -h and indeed, partition was full. Removed logfiles manually, and while I was at it I decided it was time to run an online update (yast2 / online update that is). Rebooted machine after yast telling me to do so. Sites are no longer working. Can no longer login to webmin. Only thing what works is the 'root' webpage (/srv/www/htdocs folder), which makes me rather clueless as the other sites are just not responding at all, not even a timeout or error message.While I know that deleting logfiles manually is quite stupid, I've done it fore and not really ended up in trouble.

Hence my questions: does this sound familiar to anyone and do you mind to give me a clue about where exactly I should start to look. It's been ages since I actually administrated apache, so I might overlook the obvious. Long story short: any tips are very welcome about what I should check first, what config files might have been changedith the update, etc ...

View 1 Replies View Related

OpenSUSE Network :: Novell IPrint On Version 11.1

Jan 16, 2009

With OpenSUSE 10.3 iPrint was working. I was printing to a Novell iPrint-server and had no problems at all. Now i upgrade til OpenSUSE11.1 and now iPrint does not work at all. I downloaded the lates iPrint Client that was released 13.januar 2009 and tried to install. It claims i miss "libglitz.so.1". I searche for this file in Yast and find Glitz-i586 Installed it and now iPrint Client did install witout any errors. Now i try to install an iPrint-printer that have a Linux-driver attached. Firefox crash everytime i try to install this printer. I tried both as normal user and as root but with same result. I know the normal respons is "Novell doesnt support OpenSUSE but only SLED". I dont like SLED because its not near as good as OpenSUSE. SLED does not support any multimedia and i had several unresolveable problems with it. Novell develop Novell Client for OpenSUSE, so why not iPrint Client?

View 4 Replies View Related

OpenSUSE Network :: Samba Setup On Version 11.2

Jan 17, 2010

My Samba setup works just fine however whenever I do stop/start/restart. I get these errors in the logs:
Jan 17 00:21:14 neutrino smbd[4297]: smbd_open_once_socket: open_socket_in: Address already in use
Jan 17 00:31:20 neutrino smbd[4557]: [2010/01/17 00:31:20, 0] smbd/service.c:1009(make_connection_snum)
Does anyone know what to think of these? My thought is since it works just ignore and probably the SuSE team will get to cleaning this up sometime.

View 5 Replies View Related

OpenSUSE Network :: Couldn't Find Compatible GRE Between Version 1.9.2.3 And 1.9.2.3

Apr 29, 2010

I seem to have a problem with my Firefox upgrade. I am getting the following error: could not find compatible GRE between version 1.9.2.3 and 1.9.2.3.

View 9 Replies View Related

OpenSUSE Network :: Update Firefox To Latest Version From A Repository?

Jun 18, 2010

Is there any way to update firefox to the latest stable version, like 3.6.x through the repos on OpenSUSE 11.2?
And will it cause any problems if it can be done?

View 2 Replies View Related

OpenSUSE :: Amarok Crashes On Loading After KDE 4.4 Final Update On 11.1

Feb 24, 2010

The other day I fully updated (by updating all in repository unconditionally) to KDE 4.4 final. After that it seems amarok crashes when I try to start it. Here's the "Developer Information" from the crash.

View 8 Replies View Related

OpenSUSE :: Install FF4 Final On 11.3 - Live-cd Won't Run On My Nvidia Graphic?

Apr 2, 2011

I'm still using Firefox 4 beta11, how to upgrade to ff 4 final? I'm using openSUSE 11.3 (tried to install 11.4 but live-cd won't run on my nvidia graphic)

View 2 Replies View Related

OpenSUSE :: AMule And Mozilla Seamonkey/Firefox: The Final Battle?

Aug 17, 2010

openSuSE gurus, after several weeks I've finally managed to get aMule to listen external calls from Mozilla browsers. To make it quick: In Seamonkey or FF do about:config and add

Code:
Key: network.protocol-handler.external.ed2k
Tyoe: boolean
Value: true
Key: network.protocol-handler.expose.ed2k
Type: boolean
Value: false

[Code]...

View 3 Replies View Related

Debian :: Iceweasel Icons Broken (Version 42.0)

Nov 20, 2015

As shown in the screenshots, all the Iceweasel icons are broken.

The Debian Testing (Stretch) is freshly installed. I have updated Iceweasel to version 42.0 via the experimental repository.

Gnome Classic is used.

View 2 Replies View Related

Ubuntu Installation :: Version 10.04 Broken During Software Install

Mar 25, 2011

I did a very noobish thing and broke my 10.04 installation and need help to pull it back from the brink. I began an install of LAMP using tasksel. Ignorantly I unchecked two pre selected packages - ubuntu desktop and a print related one whose name I can't recall. During the install I noticed that the installer was merrily uninstalling a whole bunch of stuff. Read later that if you uncheck the preselected options it actually uninstalls them. Perfect. Second foolish action was that in a panic to stop what I thought was a total wipe of my ubuntu installation, I just turned off the computer.

on bootup it first just hung with a black screen. Tried to repair with a live CD but got an 'unrecoverable error' message. Managed to get a bit of life with purging then reinstalling ubuntu-desktop but still hangs on bootup showing the ubuntu symbol and progress bar. So I have accessed via a Grub2 disk and logged in, in a 'low graphics' mode - actually no graphics. am using aptitude to see what the state of things is, but can't get a connection to any repositories. 'Temporary failture resolving '[URL]...etc with [ERROR] Have had a look at /ect/apat/sources.list and it's still all there. But I am basically stumped as to what to do next. Pretty sure most things are still there. And really don't want to do a fresh install. So actually what i need to do is sort out why I don't have a connection anymore.

View 4 Replies View Related

Debian Multimedia :: MPlayer Broken - Incompatible With Version Of FFMPEG

May 11, 2010

I received a few updates today, one of which is mplayer. Now mplayer is broken and from what I can gather it's because it's incompatible with the version of ffmpeg I have installed. But the real problem is that mplayer and ffmpeg were originally installed from the debian-multimedia repo but the update for mplayer is from the debian repo. I can't go back because this new mplayer is dependent on libdirectfb-1.2-9 whereas mplayer from debian-multimedia is dependent on libdirectfb-1,2-0.

In case you want the error from mplayer:
mplayer: relocation error: mplayer: symbol codec_wav_tags, version LIBAVFORMAT_52 not defined in file libavformat.so.52 with link time reference

View 10 Replies View Related

OpenSUSE Network :: Domain- Incapable MS Windows Version To Join Suse Domain?

Jun 9, 2010

I was wondering if there is any way to enable an MS Windows client that is otherwise unable of joining a domain to join a domain controlled by (open)SUSE? Is that inability only for joining a Windows based domain but a client that runs XP Home Edition or similar domain- incapable version of Windows could join a domain if it was controlled by Linux?Pardon my newbie style, but answer doesn't have to be detailed step-by-step, just yes/no answer with some pointers would do. I am not new to linux but new to network services... search engines weren't friendly when asked this question at the search bar...

View 2 Replies View Related

OpenSUSE Install :: Possible To Replace 32bit Version Of 11.1 With 64bit Version Of 11.2?

Dec 13, 2009

How do I replace a 32bit version of 11.1 with a 64bit version of 11.2 or is it even possible?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved