OpenSUSE Network :: Samba Setup On Version 11.2
Jan 17, 2010
My Samba setup works just fine however whenever I do stop/start/restart. I get these errors in the logs:
Jan 17 00:21:14 neutrino smbd[4297]: smbd_open_once_socket: open_socket_in: Address already in use
Jan 17 00:31:20 neutrino smbd[4557]: [2010/01/17 00:31:20, 0] smbd/service.c:1009(make_connection_snum)
Does anyone know what to think of these? My thought is since it works just ignore and probably the SuSE team will get to cleaning this up sometime.
View 5 Replies
ADVERTISEMENT
Jun 1, 2009
I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.
View 7 Replies
View Related
Feb 2, 2010
i would like to know how to setup Samba file replication between two Opensuse 10.3 servers,
View 7 Replies
View Related
Apr 15, 2010
I set up a Samba server on my openSuSE 11.2 machine and I can connect to it locally with the local ip and with my actuall ip. My friend however cannot. I tried to have him ping my ip and that wouldn't even work. I'm confused and wondering why it doesn't work. We share a lot of files and this would make both of our lives much easier.
View 9 Replies
View Related
Jun 8, 2010
Is it possible to setup samba to work over IPv6?
View 2 Replies
View Related
Aug 28, 2010
I have currently have opensuse 11.2 installed. I am trying to setup samba shares which you can only access as certain user. Currently looks like the only way I can access these share is use root username/password!
I want to which GUI I need to use to setup this up properly. And of course what setting to exactly to use.
View 2 Replies
View Related
Jun 7, 2010
I would like to create a dedicated Samba print server. I have two printers on my LAN, one printer came with its own NIC and the other is on a Win server box. I would like to setup Samba so that I can just access that server (Samba printer server) and both network printers will show up on there for me to connect to. On that note, can I also load the drivers on my Samba server? Drivers for different Windows flavours and also Mac OSX drivers.
View 1 Replies
View Related
Feb 10, 2010
running a Ubuntu 8.10 Desktop in the living room with a LOT of files. I've tried all week to get this working, and can't tell where the problem is. I want to make a music share that will: Allow guests, but as read-only Allow me to mount in Windows 7 with the user 'thecheeks' Give user thecheeks read/write access to that share
I swear Samba ends up working but maybe the problem is with Windows 7. I looked at the SAMBAWiki Win 7 page and made sure my registry values were what they should have been (and they were).
View 1 Replies
View Related
Oct 20, 2010
I used Samba to setup a Linux network drive in Windows. Is there anyway to do it vise versa?
View 4 Replies
View Related
Feb 24, 2009
I'm trying to setup a Samba network share with a Fedora Directory Server backend. This will be used primarily for Windows users to authenticate before accessing the share. I am using Fedora Core 10 and have all of the latest updates installed. When I try to connect from a Windows machine, I am prompted for a username and password. I enter the username and password of the account I created in Fedora Directory Server in OU=People. The credentials are rejected. At the same time in the log file I see this:
[2009/02/24 16:50:16, 3] auth/auth_sam.c:check_sam_security(282)
check_sam_security: Couldn't find user 'Administrator' in passdb.
[2009/02/24 16:50:16, 2] auth/auth.c:check_ntlm_password(318)
check_ntlm_password: Authentication for user [Administrator] -> [Administrator] FAILED with error NT_STATUS_NO_SUCH_USER
Administrator is the user I created in Fedora Directory Server. If I perform an ldapsearch it will find the user as uid: Administrator so I know it is able to be looked up in FDS. But I'm guessing that's not the problem.
[Code]...
View 4 Replies
View Related
Jun 8, 2009
When I mount my samba share on XP, I see the version number (e.g. marketing on 'Samba 3.0.29-SUSE-SL11.0 (samba.company.tld). How do I hide the version number?
View 9 Replies
View Related
Feb 4, 2010
Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?
[Code]....
View 1 Replies
View Related
Dec 17, 2010
i am tring to setup SAMBA with webmin. the problem im having is that i can not login to the shared areas like homes and users. i can see them when i search my network i double click on them and it asks for user name and password. i have already set up a user using the convert unix user to samba user and have set a password. i have set teh Use encrypted passwords? to yes. when i try and log in it say login unsuccesful login or password my be incorect.
setting up SAMBA with webmin? Samba Configuration: i fould this one but didnt help. in uesing suse 11.3 and windows vista
View 5 Replies
View Related
Mar 25, 2010
Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
View 9 Replies
View Related
May 12, 2011
I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies
View Related
Jan 26, 2010
while trying to set up Xen Virtual Nodes we encountered one issue with the network (which is why it is posted here On the DomU the interface is provided by a bonding -bond0- of three NICS. Now the Xen network script a) does not take this bonding b) destroyes even this bonding From a number of posts I assume I have to configure this by hand, correct? Is there an instruction how to do this? Simply create a bridge on top of bond0??
View 1 Replies
View Related
Jan 12, 2010
I'd like to have a set up where my Ethernet card has a static IP set up but my WiFi card doesn't.Currently I have a profile for this set up in Network Manager, however on boot up and every time I replug the cable Network Manager chooses the default "auto eth1" profile. I manually have tochoose my own profile for the Ethernet card every time. How can I make it default??I know the workaround would be to use ifup but then I lose the ability to quickly change access points for my WiFi card so that's not a solution for me
View 9 Replies
View Related
Jul 4, 2010
I've just installed openSUSE 11.2, one problem is suse didn't find an internet connection when suse performed the ..."automatic system configuration. This routine attempts to configure your network and Internet access and sets up your hardware"... Where can I manually configure the network. I'm in the network folder now no luck. I've been using every documentation I could find Novell Documentation and DVD installation/11.2 - openSUSE Network Status: Unknown network status
View 9 Replies
View Related
Dec 16, 2010
I successfully added/shared a network printer in SUSE 11.3 32 bit, but when I try on the 64 Bit box it didn't work out very well.What ports need to be open ? Is it necessary to open port 631 in YAST->Firewall->Advance- >UDP and IPP ?(TCP 631 already open) What services need to be running? Here is the error log :
[16/Dec/2010:19:25:43 -0500] [cups-polld xxx.xxx.xxx.xxx:631] CUPS-Get-Printers failed: Forbidden
XXX is my server IP
View 1 Replies
View Related
Feb 19, 2009
I am unable to do my network setup. I have a lan connection. I used to easily setup it in windows xp in network connections > internet protocol > properties. But I do not understand anything in linux. I have installed latest version of open suse 11.1 and KDE environment. Secondly I am unable to play mp3 files on it and I do not hear any sound at startup too. I *945* motherboard with a inbuilt realtek lancard and it is working fine on windows.
View 3 Replies
View Related
Jan 20, 2010
I setup a debian home server some time ago and have successfully setup samba so my windows machines can access them and upload/download data off it.I have setup opensuse on this desktop and after allowing smb through the firewall I now seem to have read only access to the smb shares.I am using the same username and password as I do on my windows machine, so in theory smb server should see my username and password and allow me read/write, like it does in win7. Is this correct?
Having just thought about it I think samba is just a tool to get shares working between linux/windows and macos.Is samba even the best tool for linux - linux sharing? how do I get read/write access to my shares in opensuse?or do I use another program to see my shares?I'm a bit new to this linux- linux sharing so I apologies.
View 1 Replies
View Related
Jul 26, 2010
Samba is working correctly if Susefirewall2 is off. I have added Samba client and Samba Services for extern access but samba is not working when firewall is now on. Which services should I also add ?
View 1 Replies
View Related
Mar 9, 2011
opensuse v11.3 linux 2.6.34.7-0.7-desktop x86_64
These message have started appearing the system logs </var/log/messages and /var/log/warn> since Mar 2, 2011. They seem to occur about every 13 minutes (780 seconds). What could it mean? Is it serious?
Code:
Mar 9 20:15:50 sma-station14l smbd[3711]: [2011/03/09 20:15:50.196387, 0] smbd/server.c:281(remove_child_pid)
Mar 9 20:15:50 sma-station14l smbd[3711]: Could not find child 10046 -- ignoring
Mar 9 20:28:50 sma-station14l smbd[3711]: [2011/03/09 20:28:50.885876, 0] smbd/server.c:281(remove_child_pid)
Mar 9 20:28:50 sma-station14l smbd[3711]: Could not find child 10326 -- ignoring
View 7 Replies
View Related
Jun 14, 2011
I have setup samba server, set NMBD, SMBD & NTPD from system services and set apparmor to complain but I am still unable to read any network drives. I have checked the firewall and seen that samba is set to enable for internal allowed services. Also should I be changing the NMBD, SMBD & NTPD to complain from App armor?
View 9 Replies
View Related
Aug 19, 2011
When I access my OpenSUSE box's samba shares from another PC I am able to browse them, but am not able to follow symlinks.I've had the problem before on Ubuntu and fixed it by adding the following lines to my /etc/samba/smb.conf
unix extensions = No
wide links = Yes
follow symlinks = Yes
I've added them into my OpenSUSE smb.conf (below) but still no joy.
View 1 Replies
View Related
Jan 16, 2009
With OpenSUSE 10.3 iPrint was working. I was printing to a Novell iPrint-server and had no problems at all. Now i upgrade til OpenSUSE11.1 and now iPrint does not work at all. I downloaded the lates iPrint Client that was released 13.januar 2009 and tried to install. It claims i miss "libglitz.so.1". I searche for this file in Yast and find Glitz-i586 Installed it and now iPrint Client did install witout any errors. Now i try to install an iPrint-printer that have a Linux-driver attached. Firefox crash everytime i try to install this printer. I tried both as normal user and as root but with same result. I know the normal respons is "Novell doesnt support OpenSUSE but only SLED". I dont like SLED because its not near as good as OpenSUSE. SLED does not support any multimedia and i had several unresolveable problems with it. Novell develop Novell Client for OpenSUSE, so why not iPrint Client?
View 4 Replies
View Related
Aug 11, 2010
I have opensusu 11.3 on my laptop and windows7 on first desktop, and XP on second desktop. Also, on my opensuse laptop I have installed XP as virtual OS in vmware player.I have setup samba using this guide that was given to me on this forum.From opensuse laptop I can see my Win 7 desktop, but cant log in. I enter Win 7 username and password, but it doesn't let me in.
Now, when I start XP trough vmware I can see win 7 desktop and connect it with username and password and browse my shares. On laptop, file sharing works both ways between host opensuse ang guest XP.On second desktop computer with XP, and I can connect to it from opensuse laptop normally.
View 6 Replies
View Related
May 25, 2009
I am having problems with samba, I went to the yast samba setup and thought I configured it but now I am stuck. I just want to really set up sharing my printer and one folder. any help will be appriciated I have a linksys router, windows vista home 32 on a laptop, opensuse 11.1 64 with windows xp home 32bit running in seemless mode on a virtualbox.
View 3 Replies
View Related
Aug 19, 2009
i'm following the tips from Samba and Suse: HowTo Set up an openSUSE-Windows Home Office LAN/Network. Versions 10, 11 to set up samba and tweak it to my needs.
View 9 Replies
View Related
Jan 6, 2010
I wonder how to get Samba share access working well...Dolphin supports Samba but it doesn't really mount anything, it seems... Non-KDE Applications therefor can't access samba that way. In Gnome there was a workaround for the same problem. You could simply go to ~/.gvfs in any application and find the samba mounted there.Is there anything like that in KDE? I set up a Samba mount via /etc/fstab for now but that is quite annoying because it fails after each Suspend, changing WLAN Access Points, etc. Then I have to go to the console and manually launch sudo mount -a to get it working again. How can I make things more comfortable?
P.S.: I'm even up for using something else than Samba to talk to my fileserver. However I don't know of anything that would work better in this regard. (NFS would have the exactly same problem for example)
View 5 Replies
View Related
