Ubuntu Networking :: Belkin F7d1101 V1 Network Is Unreachable?
Jan 3, 2011
My ubuntu installation was running fine with the Belkin F7D1101 v1 after using this install method:[URL]..But, after allowing ubuntu to autoupdate many programs (don't remember which ones), the device stopped working. I checked all of the commands in the link above. They are all still functioning. dmesg throws no errors, but it terminates with
<code>ADDRCONF (NETDEV_UP): wlan0: link is not ready</code> Are there any network files which may have been overridden from autoupdate? iwconfig wlan0 shows "Access Point: Not-Associated" What output can I show you to help me find the problem?
View 1 Replies
ADVERTISEMENT
Feb 20, 2011
I'm using a Belkin F7D1101 USB adapter for my wireless internet, and I can't get the damn thing to connect. I've installed ndiswrapper, ndisutils, and ndisgtk, then used the latter to install the driver that came with the CD (though I'm sure I'm using the right one, I've tried all the included drivers with no success). The adapter itself is functioning fine, as I've used it on Windows XP with no issues. It's just not communicating with Ubuntu very well. My issue isn't that I can't get it to show up and search for a network (as I've seen on several other posts about this adapter), but that I can't get it to actually connect to my router. Using WEP 40/128, I enter the password, but after about a minute, I'm simply prompted for the password over and over. I've restarted several times, even installed 10.04 just because I had no idea what to try, and no dice.
View 2 Replies
View Related
Mar 5, 2011
I'm having a slight problem with my new wireless card that I purchased. I installed the firmware and the like and it does work, my computer recognizes it and I can search through my available networks, only thing is though.I cannot connect to any of them. I'm fairly sure it's a problem with it obtaining an ip address though.because it does connect briefly and I read the status and it shows no IP address, but when I connect through wired internet all that information is available. I tried setting my network configuration to static and that didn't help at all. I'm only a week into Ubuntu so this is all still fairy confusing for me.
View 1 Replies
View Related
Dec 27, 2010
I've been having a lot of trouble with getting wireless networking devices to work. I guess I have a lot of company, since mfrs don't seem to be very interested in supporting Linux.It seems that one common symptom is that, when I try to "Ping" using the Terminal, I get "network is unreachable".Does this mean anything specific, or is it a general output whenever the network is not carrying on two way communications? Does it mean that the wireless interface is down? Does it mean that the wireless hardware is not transmitting? Not receiving?
View 3 Replies
View Related
Jan 11, 2010
I've got router with: eth2 - local network (192.168.1.1), ppp0 - uplink (x.y.z.a)
my firewall:
Code:
# Generated by iptables-save v1.4.5 on Mon Jan 11 12:22:25 2010
*raw
:PREROUTING ACCEPT [1038480:666298388]
[code]....
somehow iptables -t nat -A PREROUTING -i eth2 -d x.y.z.a -j DNAT --to-destination 192.168.1.1 helps, but imho there should be some other solution. kernel is 2.6.31.6, architecture is x86_64.
P.S. i've also tried iptables -A POSTROUTING ! -d x.y.z.a -s 192.168.1.0/24 -j MASQUERADE that didn't help either.
View 10 Replies
View Related
Mar 7, 2011
I have two linux servers, I tried to ping from one linux box to another and vice versa but error message is "connect: Network is unreachable" Where as If I tried from windows machine I am getting the reply from both the servers.
C:Documents and Settings>ping bnkprod
Pinging bnkprod.softtech.com [172.20.40.141] with 32 bytes of data:
Reply from 172.20.40.141: bytes=32 time=16ms TTL=64
Reply from 172.20.40.141: bytes=32 time<1ms TTL=64
Reply from 172.20.40.141: bytes=32 time<1ms TTL=64
Reply from 172.20.40.141: bytes=32 time<1ms TTL=64
Ping statistics for 172.20.40.141:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 16ms, Average = 4ms
View 2 Replies
View Related
Oct 3, 2010
I have a network printer directly connected via ethernet cable to an Ubuntu netbook, but pinging the printer fails, giving "Host Unreachable". The network light on the ethernet socket is lit green, and there is nothing else cable-connected to the network - just a simple cable connection between the netbook ethernet socket and the Network printer (a HP Laserjet 4200n). Ping works fine if I plug the cable into a different machine (a Win XP box) and ping from there, so it's not a cable or IP address problem.
This sounds simple enough and should work, but I'm stumped. Clues, anyone?
View 2 Replies
View Related
Dec 15, 2010
I'm experiencing massive latency/unreachable problems on my Linux machine. It's true for all network connections, here's an example of me trying to ping my router:
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=15115 ms
64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=14107 ms
64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=13107 ms
64 bytes from 192.168.0.1: icmp_req=4 ttl=64 time=12107 ms
64 bytes from 192.168.0.1: icmp_req=5 ttl=64 time=11108 ms
[Code]...
I've tried now with both the maverick default kernel and 2.6.37-rc5 kernel (both 64 bit), same result. If I take the card up and down (ifup, ifdown) performance is restored for a little while, then it's back. I've tried changing cable, network card and router port but no luck.
View 4 Replies
View Related
Jan 18, 2010
I want to add this route but I am getting this error message. What is the reason of this problem? I cant add this route? how can i add?
Code: [root@linux/]# route add -net 10.1.0.0 netmask 255.255.0.0 gw 10.2.0.1 eth0 SIOCADDRT: Network is unreachable
View 11 Replies
View Related
Aug 7, 2011
I am plagued by the following error when attempting port forwarded connections to my minecraft server. Port forwarding is good and test ok on router based firewall. No iptables entries. Natty N, all updates current.
[INFO] Disconnecting CascadianNW [/184.100.247.218:57787]: Failed to verify username! [internal error java.net.NoRouteToHostException: Network is unreachable]
java.net.NoRouteToHostException: Network is unreachable
Some discussion indicate jvm network connection issues related to ipv6, but they are old posts.
View 1 Replies
View Related
Apr 13, 2011
I recently installed the latest and greatest Lubuntu 64 bit, because I like lxde and I am planning a system migration. (I am really starting to not like windows 7.) I have some linux experience. I wouldn't say I am awesome at it, but I am comfortable trying anything.
Example: I have used CENTOS 5.6 to make a linux machine server as a glorified router, with asterisks, SIP, SSH server, x windows, GNome, VNC, and a user authentication system. and get this I walked somebody through setting this up over the phone. I reopened the root account (I honestly got tired of typing sudo every other command is the only reason why I opened it.) I plan on closing it after we are done.
lsusb lists the wireless adaptor
Wireless Card Link
[[URL]
I have the driver CD. I installed ndiswrapper.I copied the files from my driver cd to my <home> Directory. Then installed the Windows XP version of the drivers using ndiswrapper -l <driver>. I then made ndiswrapper force the driver to the vendor ID of the wireless card. Using ndiswrapper -a <vendor ID> <Driver>(I did this last night and the vendor ID escapes me. I am at work now.)I finally ran depmod -a and modprobe ndiswrapperI goto the windows wireless driver application, and it shows the driver as loaded and the hardware as found.
However, it still does not list a wireless device in the network manager to where I can connect to my wireless. iwconfig does not show any wireless LAN, but it is still listed in lsusb. Also, the light that shows activity on the wireless device does not light up or blink at all. I have about 6 usb ports on my desktop and have tried everyone. The wireless card also works in Windows 7 64-bit On a strange side note. I do have internet access through LAN, (My laptop is atm a glorified wireless card .)
View 4 Replies
View Related
Jul 12, 2010
I have recently installed 10.04 on an old box I have sitting around and wanted to include it in my home network. After struggling with Network Manager I went in and set up the files manually.
/etc/hosts reads:
127.0.0.1 localhost
10.0.0.01 one.network one
10.0.0.02 two.network two
[code]....
then the IPv6 stuff
/etc/network/interfaces reads:
auto lo
iface lo inet loopback
auto eth0
[code]...
Now I can access the internet from this machine, but when I attempt to ssh to another machine in the network I get the message "Port 22 network is unreachable" Checking with google I found that there should be some ssh config files. I have one ssh_config but no sshd_config. I don't know if this is relevant. Also "network" is not the name of my network. Changed for anonymity.
View 4 Replies
View Related
Nov 12, 2009
I recently installed Fedora 10 and I'm trying to install a driver for my HP Deskjet F4200 Series All in One printer. I downloaded the proper hplip file and when i go to install it in the terminal it gets to the very end where it is trying to install the missing required dependencies. When it checks for the network connection it comes back saying "error: The network appears to be unreachable. Installation cannot complete without access to error: distribution repositories. Please check the network and try again."I am connected to the internet through hardwire cable (also tried it through wifi) and have no trouble accessing internet through mozilla or downloading packages elsewhere. Any ideas on why my terminal won't recognize my internet connection??
View 3 Replies
View Related
Mar 12, 2009
I installed Fedora 10 and are using KDE. I struggled to get my network up and running - error for ping was "network is unreachable". I eventually got it right by modifying my ifcfg-eth0 file manually.
Now I'm trying to install with yum, but yum fails to connect, probably because of the proxy. I've set the proxy in <System Settings><Network Settings><Proxy> but it doesn't allow me to also add the authorization - greyed out. I've chosen the manual configuration of proxy.
1. How can I enable or allow the adding of authorization in the proxy dialogs or
2. Where is the proxy file which I can modify from command line (and how)?
View 4 Replies
View Related
May 28, 2011
I am building a v2.6 kernel floppy disk distro to run on a 1992 computer. FWIW The specs on the computer are
* 66 MHZ processor
* 12 MB ram
* 400 MB HD
* EGA monochrome video card
It runs Linux quite nice actually. I want to get it online with a null modem cable and use the other Linux box as a gateway to the internet. I have networking, TCP and slip support in the kernel. I do now know if I have all the needed network configuration files. I am able to ping 127.0.0.1. If I try to ping the other computer, I get a "network is unreachable" error. Tell me any commands to run on either box and I will attempt to do so. Remember the old computer is running a stripped down toolset since its only two floppies worth.
View 6 Replies
View Related
Jul 17, 2011
I installed openSUSE on one of my work system. The network port wasn't working when I was installing, but works fine now (checked in Windows). But for some reason, I am not able to configure the network. I used both Dynamic and Static IPs (both work fine in Windows) but still no go. I am using Yast Control Center for this purpose. I can't even ping the default gateway when I am using custom settings. When I use dynamic settings, it says Unreachable Network.
View 7 Replies
View Related
Apr 27, 2010
setup my static network connection Here are my details :
IP : 172.16.152.137
Subnet : 255.255.255.192
Gateway : 172.16.152.191
Primary DNS : 172.16.0.1
[code]....
but after this setup when i restart my network #service network restart while bringing up the eth0 the following message is displayed before [OK] - RTNETLINK answers : Invalid Argument now it seems either this setup is wrong or not sufficient to set up the connection, whenever i try to ping 172.16.0.1 it showing connect : Network is Unreachable
View 11 Replies
View Related
Feb 3, 2010
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
View 1 Replies
View Related
Feb 15, 2010
Am all of 2 days old on Opensuse 11.0 having just installed it on my old PC. All my experience has been with XP/Vista and Macs and it took some courage to finally try this out. My Belkin F5D9050 wireless(g+ MIMO) usb network card is recognised in yast but does not connect to the internet. On reading through forums I understand that this adaptor uses RAlinks RT73 chipset and support for should already be available in the OS. Is this correct ? If not, where do I get the driver for this and how do I install this. As per the Belkin site, Opensuse driver support isnt listed. Am struggling due to the unfamiliar environment and am not aware of terminal commands.
View 1 Replies
View Related
Mar 25, 2010
I have one server with 4 network interfaces:
eth0: 192.168.0.0/24 - local lan A
eth1: 200.1.2.3 - internet link - default route
eth2: 192.168.10.0/24 - local lan B eth3: 192.168.20.0/24 - local lan C
Lan A - Default routing to eth0
Lan B - Default routing to eth2
Lan c - Default routing to another server but the workstations has static routing to this server too.
Everything is working fine on Opensuse 11.1 until I upgrade this sever to Opensuse 11.2 ( Reinstall, not update at all ). After upgrade to 11.2 the routing across local lan interfaces simply not work, if you try to ping lan-to-lan you got the message: Network unreachable, even with the IP Forward enable, but the default route is working fine trough the SNAT.
I've come back to Opensuse 11.1 and everything become normal, does anyone have an problem like this? Maybe a bug? PS: I do not try to disable the AppArmor, next weekend I will try Opensuse 11.2 without the AppArmor and post here anyway.
View 9 Replies
View Related
Aug 17, 2010
Flashed bios lastnight on 13.0 desktop.
all winblow$ are fine.
lspci shows ehthernet card
did 'netconfig' and
'route -n' shows default settings as if /etc/rc.d/rc.inetd1.conf were never set.
oh yes, i manually edited this too. mv'd and netconfig'd.
View 5 Replies
View Related
May 25, 2011
I use DNS on my server as a chasing DNS so its not fully configured. I seem to be having trouble with IPV6 addresses. I'm guessing this is linked to the 6to4 tunnel I have set up to my windows box, but I'm not really sure.
Code:
May 21 18:00:16 hyrule named[1148]: error (network unreachable) resolving 'D.ROOT-SERVERS.NET/AAAA/IN': 2001:dc3::35#53
May 21 18:00:16 hyrule named[1148]: error (network unreachable) resolving 'B.ROOT-SERVERS.NET/AAAA/IN': 2001:500:1::803f:235#53
May 21 18:00:17 hyrule named[1148]: error (network unreachable) resolving 'zg.akamaitech.net/AAAA/IN': 2001:503:a83e::2:30#53 .....
View 3 Replies
View Related
Jan 29, 2011
I'm using debian lenny.When I boot with kernel 2.6.36, ping always respond with Network is Unreachable. But when I boot with kernel 2.6.26 it works. I can't even ping the dafault router of 2.6.26 kernel when I am at 2.6.36. Also, system/administration/network does not show any connections while it shows something at the other kernel.
View 1 Replies
View Related
Aug 16, 2009
I installed centos 5.3 x86 at vrtualbox on windows 7 x64 as host. The ping answers "network is unreachable", ifconfig has an ip "192,168,51,100". At control panel, I seleted intel PRO/1000MT Desktop Host only. Is this centos's problem?
View 3 Replies
View Related
Jan 16, 2011
When ever i try to access 202.164.53.122 through ssh i get the following error message:
Couldn't establish connection to proxy: Network is unreachable ssh_exchange_identification: Connection closed by remote host
I have a account at 202.164.53.122.firewall is on.
View 1 Replies
View Related
Mar 11, 2011
I'm looking at buying one of the above cards, and was wondering if anyone knew if they worked in master mode (e.g. as an access point). According to the Aircrack-ng site, they support packet injection and monitor mode. Is master mode support solely up to the driver used with the card, or does the card have to physically support it?
View 2 Replies
View Related
Aug 19, 2010
This is on Ubuntu 10.04 Server Edition. The ethernet cord was disconnected one day. I plugged it back in to find I can ssh to and from that machine, but I cannot update or browse the web (elinks) on it. I tried "ifconfig eth0 up" which did nothing. Why is it that only local connections work?
View 1 Replies
View Related
Feb 3, 2011
Tomorrow I'll delete Ubuntu and install Opensuse. I use 100% linux system PC, with no windows and I'm interested to know if someone have found a way to use Belkin Network USB Hub (Belkin : Network USB Hub). Belkin doesn't provide linux drivers for this network hub.I've tried on Ubuntu to install the windows driver with Wine with no success. Maybe in Opensuse It'll be the same, but if anyone have got a good experience with this hardware,
View 2 Replies
View Related
Aug 26, 2010
I am thinking about buying Belkin's Network USB Hub so that I can plugin usb devices and share it over network(Debian based computers). The device's website and spec can be found at: [URL]. Is this device supported by Debian Etch or Lenny? Did anyone used it on any versions of Debian
where it worked? Is there a Linux driver for it?
View 1 Replies
View Related
Jan 15, 2010
I have a ubuntu desktop 9.10 that is used as a file server and occasionally as a desktop. My problem is after about 15 min of idle the server can not be accessed by other computers. I attempted to disable power management but Im not sure if i did that correctly. Where should i look for problems?
View 9 Replies
View Related
