I am thinking about buying Belkin's Network USB Hub so that I can plugin usb devices and share it over network(Debian based computers). The device's website and spec can be found at: [URL]. Is this device supported by Debian Etch or Lenny? Did anyone used it on any versions of Debian
where it worked? Is there a Linux driver for it?
Every time i try to click it, in the file manager, I get the error failed to open "/ on" The specified location is not supported.
I need to be able to connect to my storage server...
Am all of 2 days old on Opensuse 11.0 having just installed it on my old PC. All my experience has been with XP/Vista and Macs and it took some courage to finally try this out. My Belkin F5D9050 wireless(g+ MIMO) usb network card is recognised in yast but does not connect to the internet. On reading through forums I understand that this adaptor uses RAlinks RT73 chipset and support for should already be available in the OS. Is this correct ? If not, where do I get the driver for this and how do I install this. As per the Belkin site, Opensuse driver support isnt listed. Am struggling due to the unfamiliar environment and am not aware of terminal commands.
View 1 Replies View RelatedI'm looking at buying one of the above cards, and was wondering if anyone knew if they worked in master mode (e.g. as an access point). According to the Aircrack-ng site, they support packet injection and monitor mode. Is master mode support solely up to the driver used with the card, or does the card have to physically support it?
View 2 Replies View RelatedTomorrow I'll delete Ubuntu and install Opensuse. I use 100% linux system PC, with no windows and I'm interested to know if someone have found a way to use Belkin Network USB Hub (Belkin : Network USB Hub). Belkin doesn't provide linux drivers for this network hub.I've tried on Ubuntu to install the windows driver with Wine with no success. Maybe in Opensuse It'll be the same, but if anyone have got a good experience with this hardware,
View 2 Replies View RelatedI have gotten this to work on Xubuntu here: [SOLVED] Ndiswrapper? Does it work? - Ubuntu Forums.I think it would use the same software/firmware? I am using OpenSUSE 11.4 LXDE derivative.
View 4 Replies View RelatedCannot Connect to a wireless network using a USB Belkin 802.11g Model F5D7050: Setting up a new pc is running opensuse 11.2 (i586) KDE 4.3.1
Question1) The HCL shows a version, how do I find what version i have?
Question2) Why is rt73.bin not being loaded? I ask this because the file is located in Root/lib/firmware
Question3) Why is Configure Desktop > Network Manager > Wifi is blanked out as if doesnt exist?
Question 4) when using YAST > Network Settings > Initially under wireless network card configuration I can scan the area and find networks successfully (I got 2, one as a wifii hotspot from my pda cell phone, the other is the standard wireless network for laptops and such).... but if i use kinternet >wlan0 > wireless connection, nothing will be found! I did a search on the /var/bootlog msg for "switch" and "radio", for radio I found the following:
<6>[ 9.108858] Registered led device: rt73usb-phy1::radio
<6>[ 9.108884] Registered led device: rt73usb-phy1::assoc
<6>[ 9.108909] Registered led device: rt73usb-phy1::quality
<6>[ 9.109386] usbcore: registered new interface driver rt73usb
[Code].....
My ubuntu installation was running fine with the Belkin F7D1101 v1 after using this install method:[URL]..But, after allowing ubuntu to autoupdate many programs (don't remember which ones), the device stopped working. I checked all of the commands in the link above. They are all still functioning. dmesg throws no errors, but it terminates with
<code>ADDRCONF (NETDEV_UP): wlan0: link is not ready</code> Are there any network files which may have been overridden from autoupdate? iwconfig wlan0 shows "Access Point: Not-Associated" What output can I show you to help me find the problem?
I'm using a Belkin F7D1101 USB adapter for my wireless internet, and I can't get the damn thing to connect. I've installed ndiswrapper, ndisutils, and ndisgtk, then used the latter to install the driver that came with the CD (though I'm sure I'm using the right one, I've tried all the included drivers with no success). The adapter itself is functioning fine, as I've used it on Windows XP with no issues. It's just not communicating with Ubuntu very well. My issue isn't that I can't get it to show up and search for a network (as I've seen on several other posts about this adapter), but that I can't get it to actually connect to my router. Using WEP 40/128, I enter the password, but after about a minute, I'm simply prompted for the password over and over. I've restarted several times, even installed 10.04 just because I had no idea what to try, and no dice.
View 2 Replies View RelatedI have recently installed openSUSE 11.3 I have a Belkin G Wireless Network Adaptor
Model: F5D7050
FCC ID: K7SF5D7050E
Linux doesn't seem to recognise this device at all. I had a look online from another PC for drivers. and they are provided by Belkin themselfs but only for Windows XP/Vista.Is it possible to get this working on openSUSE. I previously used this very same adaptor on an Unbuntu 10.2 PC and it worked with no problems at all.
I have a Belkin Wireless G USB Network Adapter but I cant get on the internet with it.The laptop is running Damn Small Linux.Heres what is going on and the code I typed:
ndiswrapper -i rt73.INF
ndiswrapper -l
modprobe ndiswrapper
iwconfig
ndiswrapper says the driver and hardware are present but iwconfig and ifconfig don't say anything.The wireless adapter works fine in windows 2000 and windows xp with the same driver.The green LED on the wireless adapter never flashes like it is supposed to.
configure my Belkin Wireless USB adapter(F7D2101)? I attached the adapter and rebooted the system. I used the hardware info and it is listed but no drivers.
View 1 Replies View Relatedi have ubuntu 10.04 i believe and i cant connect to the intenret i guess its not detecting my wireless adapter. i cant try ethernet cord which prolly would work because i cant move pc to another room....is there any fix for this? i googled linux drivers but i cant find any...i do have the cd that came with the adapter.
View 1 Replies View RelatedI recently installed the latest and greatest Lubuntu 64 bit, because I like lxde and I am planning a system migration. (I am really starting to not like windows 7.) I have some linux experience. I wouldn't say I am awesome at it, but I am comfortable trying anything.
Example: I have used CENTOS 5.6 to make a linux machine server as a glorified router, with asterisks, SIP, SSH server, x windows, GNome, VNC, and a user authentication system. and get this I walked somebody through setting this up over the phone. I reopened the root account (I honestly got tired of typing sudo every other command is the only reason why I opened it.) I plan on closing it after we are done.
lsusb lists the wireless adaptor
Wireless Card Link
[[URL]
I have the driver CD. I installed ndiswrapper.I copied the files from my driver cd to my <home> Directory. Then installed the Windows XP version of the drivers using ndiswrapper -l <driver>. I then made ndiswrapper force the driver to the vendor ID of the wireless card. Using ndiswrapper -a <vendor ID> <Driver>(I did this last night and the vendor ID escapes me. I am at work now.)I finally ran depmod -a and modprobe ndiswrapperI goto the windows wireless driver application, and it shows the driver as loaded and the hardware as found.
However, it still does not list a wireless device in the network manager to where I can connect to my wireless. iwconfig does not show any wireless LAN, but it is still listed in lsusb. Also, the light that shows activity on the wireless device does not light up or blink at all. I have about 6 usb ports on my desktop and have tried everyone. The wireless card also works in Windows 7 64-bit On a strange side note. I do have internet access through LAN, (My laptop is atm a glorified wireless card .)
anyone know if LLA is supported by openSUSE 11.3?
View 8 Replies View RelatedI have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
The linksys AE1000 is not supported by linux according to the linksys website. Are there any workarounds? I use this network adapter to connect to my wireless network, and it is basically useless at the moment.
View 6 Replies View Relatedafter trying several pci and usb network cards none were able to have their ssid broadcasted. The question that i have is: Can a suse box be converted to act as an acces point without the use of atheros based hardware, without switching over to ubuntu and or debian, without the use of openwrt?
View 4 Replies View RelatedI'm using Ubuntu Linux as my operating system.In my network only the ipv4 is suported, and I need to access some website through ipv6. How can I do it, is there a way to tunnel from the ipv4 to ipv6.
View 2 Replies View RelatedI'm using linux suse 9.3. Recently i try to run execution files but it shows an error try running with the option "-console" or "-silent" When I tried with the -console option, I got the error - The wizard cannot continue because of the following error: Invalid command line option: console is not supported (1001) (403)
[Code]...
My home connection is dialup via an 8-bit ISA modem. I plan to use the old box with the modem in it as a gateway and do my actual work on this laptop. Connection away from home is not so easy to get in my area.
SuSE 6.1 has no problem operating the modem, so the hardware works. SuSE 6.1 can't seem to make anything else work though. How can I configure Debian to see and operate this modem?
SuSE sees the modem on /dev/ttyS1. The same chat script does nothing on jessie. I'm guessing that jessie is just not seeing ISA.
I'm able to install packages onto the box via a usb drive but that's only on the days when the local coffee shop's wi-fi actually works, which is rare.
I am new to Debian Wheezy and I can't install anything. Ever time I try to install a .deb file I get the message saying that installation is not supported by backend. Also I'm unable to install from the terminal; it always says something like "path not found" or "file doesn't exist" (I'm on my phone so I don't have an exact error detail). Everything I've read tells me to install something to fix the problem but I can't install them due to the same error.
View 14 Replies View RelatedI'm running debian 5.3(i think) I've tried installing skype, google chrome and flash player. All of them are .deb files and on everyone it says "archive type not supported", what should I do to install them?
View 7 Replies View RelatedI've just tried to install X on my new debian system which had a nasty side effect.
I can see the bootcycle up to "Waiting for /dev to be fully populated." and then the screen switches into a display mode unsupported by my display. I've had problems like this many times before because the display returns it's capabable of resolutions like 2048x1536, which it just isnt. I've had to disable autodetection whenever using this display. One thing to note thought is that it's NOT X that's messing up the display. It's setting the wrong display mode even before the filesystems are mounted. And I've already uninstalled X with no change either. Also recovery(single user) mode has no proper display output either.
what is setting my display to the wrong mode?
once again banging the head against a brick wall, entered the following commands in to client and server, but get the above message on both, is there something wrong with the script, or thw computers? mount 192.168.1.68:/export/shared /mnt/nfs_on_debian
View 1 Replies View RelatedI bought SIMCOM GSM Serial modem . It is working well with Debian/Ubuntu OS; also I am able to control it using Minicom,Cu ..etc . Now I am interested to buy usb gsm modem.which USB gsm modem works well with Debian and ubuntu OS ? .
View 5 Replies View RelatedIS SELinux fully supported by debian
View 1 Replies View RelatedI'm trying to use mlabel, i installed mtools and cp /etc/mtools.conf to ~/.mtoolsrc. Try to assing a letter to a drive:
drive p: "/dev/sdb1"
but it still does not work. when i do: mlabel -s. it shows: Drive 'P:' not supported Cannot initialize 'P:' mlabel: Cannot initialize drive.
Brand new to Linux. Just installed Debian 5.0.6 (64-bit). Upon booting up, the screen is all black with a gray floating screen that says "Input Not Supported". My guess is that the video card is not supported by Debian, but maybe somebody knows a way around this problem... (I know for a fact that both video card and LCD work fine in Windows XP.)
My hardware:
* Video card: ATI Radeo HD 4850
* LCD: Acer V193W
I'm having trouble implementing SSL on a AvantFax login screen. I've created the the certificates and keys and have them stored in /etc/apache2/ssl and I'm sort of stuck now. I've been following a guide but any changes to the conf files leads to errors. The system I'm using is Debian 5.0
[Code]...
