General :: Belkin G Wireless Network Adaptor On OpenSUSE 11.3?
Nov 25, 2010
I have recently installed openSUSE 11.3 I have a Belkin G Wireless Network Adaptor
Model: F5D7050
FCC ID: K7SF5D7050E
Linux doesn't seem to recognise this device at all. I had a look online from another PC for drivers. and they are provided by Belkin themselfs but only for Windows XP/Vista.Is it possible to get this working on openSUSE. I previously used this very same adaptor on an Unbuntu 10.2 PC and it worked with no problems at all.
View 1 Replies
ADVERTISEMENT
Jun 27, 2011
very new to using fedora and trying to install my belkin wireless adaptor is not working at all. It reads the disk but says there is an error.it still works fine on windows so i'm not sure how to fix this.
View 1 Replies
View Related
Sep 6, 2011
I have gotten this to work on Xubuntu here: [SOLVED] Ndiswrapper? Does it work? - Ubuntu Forums.I think it would use the same software/firmware? I am using OpenSUSE 11.4 LXDE derivative.
View 4 Replies
View Related
Dec 23, 2009
Cannot Connect to a wireless network using a USB Belkin 802.11g Model F5D7050: Setting up a new pc is running opensuse 11.2 (i586) KDE 4.3.1
Question1) The HCL shows a version, how do I find what version i have?
Question2) Why is rt73.bin not being loaded? I ask this because the file is located in Root/lib/firmware
Question3) Why is Configure Desktop > Network Manager > Wifi is blanked out as if doesnt exist?
Question 4) when using YAST > Network Settings > Initially under wireless network card configuration I can scan the area and find networks successfully (I got 2, one as a wifii hotspot from my pda cell phone, the other is the standard wireless network for laptops and such).... but if i use kinternet >wlan0 > wireless connection, nothing will be found! I did a search on the /var/bootlog msg for "switch" and "radio", for radio I found the following:
<6>[ 9.108858] Registered led device: rt73usb-phy1::radio
<6>[ 9.108884] Registered led device: rt73usb-phy1::assoc
<6>[ 9.108909] Registered led device: rt73usb-phy1::quality
<6>[ 9.109386] usbcore: registered new interface driver rt73usb
[Code].....
View 1 Replies
View Related
May 26, 2010
configure my Belkin Wireless USB adapter(F7D2101)? I attached the adapter and rebooted the system. I used the hardware info and it is listed but no drivers.
View 1 Replies
View Related
Mar 11, 2010
I have a Belkin Wireless G USB Network Adapter but I cant get on the internet with it.The laptop is running Damn Small Linux.Heres what is going on and the code I typed:
ndiswrapper -i rt73.INF
ndiswrapper -l
modprobe ndiswrapper
iwconfig
ndiswrapper says the driver and hardware are present but iwconfig and ifconfig don't say anything.The wireless adapter works fine in windows 2000 and windows xp with the same driver.The green LED on the wireless adapter never flashes like it is supposed to.
View 3 Replies
View Related
Nov 27, 2009
ive got a Ubuntu v9 and i wanna get my internet to work on it, ive looked all over the place but i cant find a driver for:
linksys wireless-G USB network adaptor
model number:WUSB54G version: 4
View 4 Replies
View Related
Feb 3, 2010
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
View 1 Replies
View Related
Jan 20, 2011
I use openSUSE 11.3 with KDE 4.4 and I have a Belkin Share Wireless USB Adapter (F7D2101 v1) , I attached the adapter and rebooted the system, it does not work. Can someone help me configure?
I attached the adapter and the system says:
dmesg | tail
[ 1184.799076] usb 1-1: USB disconnect, address 2
[ 2003.060031] usb 1-1: new high speed USB device using ehci_hcd and address 7
[ 2003.194525] usb 1-1: New USB device found, idVendor=050d, idProduct=845a
[ 2003.194531] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2003.194535] usb 1-1: Product: Connect Wireless USB Adapter
[Code]...
View 9 Replies
View Related
Mar 27, 2011
Following sticky Thread: Getting Your Wireless to Work - Everything seems okay through step VI, getting an IP address through DHCP. It appears that authorization is failing. Results from steps in sticky:
Note: This is a new installation of openSUSE on fresh (formatted) workstation
Step II What device? Hardware info from YAST - Wireless LANUSB2.0 WLAN (wlan0)Kernel Driver: zd1211rw lsusb reports "Bus 001 Device 002: ID 050d:705c Belkin Components F5D7050 Wireless G Adapter v4000 [Zydas ZD1211B]"
Step III External firmware? I downloaded the b43 packages, installed as normal and used etc/SysConfig editor to add b43 to modules loaded on boot.
dmesg|grep firmware
[ 22.468807] zd1211rw 1-3:1.0: firmware version 4725
Ran the following check from another thread
rfkill list all
0: phy0: Wireless LAN
[code]....
View 9 Replies
View Related
May 26, 2010
configure my Belkin Wireless USB adapter(F7D2101)? I attached the adapter and rebooted the system. I used the hardware info and it is listed but no drivers.
View 4 Replies
View Related
Jun 16, 2010
I have a Belkin F5D8055au USB wireless adapter which I can't configure in YAST. I have downloaded the RT2870sta driver from RALink and compiled it - seemed to be ok. Modprobe loads it ok. Some info:
[Code]...
When I open network settings in YAST my wired (ethernet) card shows up but not the USB. If I manually add a wireless card, I can't select the kernel module from the drop down list - there is nothing in it. At that point I abort YAST. So, how do I convince YAST that there really is a USB wireless adapter connected?
View 9 Replies
View Related
Jan 3, 2011
i have ubuntu 10.04 i believe and i cant connect to the intenret i guess its not detecting my wireless adapter. i cant try ethernet cord which prolly would work because i cant move pc to another room....is there any fix for this? i googled linux drivers but i cant find any...i do have the cd that came with the adapter.
View 1 Replies
View Related
Apr 13, 2011
I recently installed the latest and greatest Lubuntu 64 bit, because I like lxde and I am planning a system migration. (I am really starting to not like windows 7.) I have some linux experience. I wouldn't say I am awesome at it, but I am comfortable trying anything.
Example: I have used CENTOS 5.6 to make a linux machine server as a glorified router, with asterisks, SIP, SSH server, x windows, GNome, VNC, and a user authentication system. and get this I walked somebody through setting this up over the phone. I reopened the root account (I honestly got tired of typing sudo every other command is the only reason why I opened it.) I plan on closing it after we are done.
lsusb lists the wireless adaptor
Wireless Card Link
[[URL]
I have the driver CD. I installed ndiswrapper.I copied the files from my driver cd to my <home> Directory. Then installed the Windows XP version of the drivers using ndiswrapper -l <driver>. I then made ndiswrapper force the driver to the vendor ID of the wireless card. Using ndiswrapper -a <vendor ID> <Driver>(I did this last night and the vendor ID escapes me. I am at work now.)I finally ran depmod -a and modprobe ndiswrapperI goto the windows wireless driver application, and it shows the driver as loaded and the hardware as found.
However, it still does not list a wireless device in the network manager to where I can connect to my wireless. iwconfig does not show any wireless LAN, but it is still listed in lsusb. Also, the light that shows activity on the wireless device does not light up or blink at all. I have about 6 usb ports on my desktop and have tried everyone. The wireless card also works in Windows 7 64-bit On a strange side note. I do have internet access through LAN, (My laptop is atm a glorified wireless card .)
View 4 Replies
View Related
Feb 15, 2010
Am all of 2 days old on Opensuse 11.0 having just installed it on my old PC. All my experience has been with XP/Vista and Macs and it took some courage to finally try this out. My Belkin F5D9050 wireless(g+ MIMO) usb network card is recognised in yast but does not connect to the internet. On reading through forums I understand that this adaptor uses RAlinks RT73 chipset and support for should already be available in the OS. Is this correct ? If not, where do I get the driver for this and how do I install this. As per the Belkin site, Opensuse driver support isnt listed. Am struggling due to the unfamiliar environment and am not aware of terminal commands.
View 1 Replies
View Related
Jul 8, 2011
I have configured my PC to run a linux 2.6 kernel in VMware and have no problem loading the image and using the wired network adaptor and the basic functions. I am having trouble finding the wireless network however. My Box has an " Intel(R) Centrino(R) Advanced-N 6250 AGN " wireless network adaptor. From what I can tell, this is supported by this version of linux. I have the adaptor enabled, my image settings as bridged, and the wimax enabled in the removable devices (connected). When I run WiCD manager I get the error message " Could not connect to wicd's D-Bus interface "
View 1 Replies
View Related
Aug 6, 2010
I just moved to Linux, and I really need some help for my wireless adapter. What I am using is Belkin F6D4050 v2. I think I should use the rt2870sta driver. After 2 days working, my laptop can recognize the wireless adapter now. But it can not find any wireless connections. There are some information. Hope they are useful.
[Code]...
View 9 Replies
View Related
Feb 3, 2011
Tomorrow I'll delete Ubuntu and install Opensuse. I use 100% linux system PC, with no windows and I'm interested to know if someone have found a way to use Belkin Network USB Hub (Belkin : Network USB Hub). Belkin doesn't provide linux drivers for this network hub.I've tried on Ubuntu to install the windows driver with Wine with no success. Maybe in Opensuse It'll be the same, but if anyone have got a good experience with this hardware,
View 2 Replies
View Related
Sep 29, 2010
I have a Belkin F5D6050 adapter, which (despite being only 11b) was working better than my 11n adapter on 11.1 [The 11n stopped working today after I ran an upgrade; I have got it working - in a fashion under 11.3 - see RTL819SU not working with ifup (needs ifup-dhcp first)] I can't connect to my AP. The significant output from dmesg appears to be:
Code:
[19991.327361] wlan1: authenticate with 1c:af:f7:26:01:bc (try 1)
[19991.524037] wlan1: authenticate with 1c:af:f7:26:01:bc (try 2)
[19991.724034] wlan1: authenticate with 1c:af:f7:26:01:bc (try 3)
[19991.924031] wlan1: authentication with 1c:af:f7:26:01:bc timed out
FYI the info from
[Code]...
View 2 Replies
View Related
Jan 1, 2011
I am new to ubuntu and am trying to connect to the Internet with a usb wireless from belkin. Attached is the wireless_setup.txt.
View 2 Replies
View Related
Dec 11, 2010
Trying to add wireless adapter to my fedora 13 system. Belkin f5d7050 raxwn450th v4000. Located zydas zd1211 driver on source forge. Downloaded and installed it
Code:
showed my dsl wireless adapter
system - preferences - network connections did not show it
I rebooted - now
Code:
shows my dsl adapter, and lsusb says
Code:
But it not show up on system - preferences - network connections
Would have prefered to install it via yum but dont know the magic words to get yum to find it.
View 1 Replies
View Related
Jan 10, 2010
I have had some experience with ubuntu on my Lenovo y730. I was told to run debian on my dell 2650 for the compatibility, All I want is to be able to run either my Belkin pre n f5d8010 pcmcia card or a linksys usb wifi.
View 1 Replies
View Related
Jun 12, 2010
I'm pretty new to Linux, but have had a bit of functional tutoring. i'm triple booting my old Dimension 8400. Have been running with Jackalope and XP for some time now and wanted to install Lynx and get a good handle on it before i completely wipe my other machine (Win7/Jackalope) and install it there.
Installed Lynx from a USB stick and all seems well, it recognises the UBS wireless and all available connections but just sits and spins on the password login and never connects...hmmm. I have tried all possible combinations of rebooting with the USB connected/disconnected/connecting after... to no avail.
The wireless seems to "work out of the box" just as seamlessly as it did for Jackalope, all the steps are similar, it just never connects.
View 6 Replies
View Related
Aug 6, 2011
I have a older Dell desktop running a older version of Ubuntu 9.04. I recently got a Belkin N300 micro wireless usb adaptor so I could use it to connect to the internet. I have a Verizon MiFi 2200 wireless router that I use for internet access. The desktop won't recognize the new hardware. It came with a driver disc, but it's for windows.
Will this adapter even work with linux?
If so, how do I get it to work?
View 4 Replies
View Related
Mar 1, 2010
I have a usb wireless adaptor that I sometimes need to remove from the computer, but often it locks up my system upon removal, even after typing "ifconfig rausb0 down" Is there a Linux equivalent to the windows "safely remove hardware" applet for usb devices?
View 1 Replies
View Related
Jan 9, 2011
I have two nic's connect to different networks. I would like to use one to pick up my email and connect to skype and the other for general internet access. Is this possible?
View 2 Replies
View Related
Apr 1, 2011
I'd like to know how can I find a Linux wirelles driver for wireless Belkin card.
View 1 Replies
View Related
Mar 23, 2010
When i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies
View Related
Dec 4, 2010
I have been given an Edimax EW7318USG wireless adaptor,no drivers.I download 2008_0506
_RT73_Linux_STA_Drv1.1.0.1.tar.zip from [URL]..onto my Linux computer using an adaptor from another computer.but cannot find out what to do next:. I have just installed Fedora 11 from a Linux Format magazine DVD.
View 2 Replies
View Related
Apr 16, 2010
I set up an older computer with Ubuntu 9.10 and tried to get my Linksys AE1000 Wireless N adapter to work. My first mistake was not checking in advance to see if this adapter would work, but I have taken the leap and I am intent on making it work. I ran lsusb and it gives me a device number (13b1:002f) so I know it can be seen and I have also installed indisgtk the GUI for Wirless drivers. I have tried some suggestions from other posts to no avail.
View 9 Replies
View Related
