Sometimes when I boot openSuse 11.2, it only boots to runlevel 2 (console) I have to log in as root and enter init 5 to make kdm appear. Then I can log in normally, and everything works fine.
View 9 Replies
I have just done a fresh network install on SUSE on a new HP Proliant ML115 server. The install seemed to go OK, but on rebooting after the install I get a shell logon/prompt -- no GUI. Have tried reinstalling with the same result. If I try to run startkde I get a message that says "$DISPLAY is not set or cannot connect to the X server."
How do I resolve this?
I got an opensuse 10.2 on a aged desktop. Once start, it just stops at command line login prompt. I have to login and type 'startx' to get the GUI. Since I haven't used this computer for over half year. I couldn't remember what I did last time. Any tips for this problem?
View 4 Replies View RelatedMy laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction:ATI Installer HOWTO for openSUSE usersafter installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually.i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important.now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.he graphic card is :ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
View 9 Replies View RelatedMy laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction: ATI Installer HOWTO for openSUSE users after installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually. i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important. now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.the graphic card is :
ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
My wifes computor crashed during an update with a message to fill in a report. It would not respond to any key presses. The computor has been running 11.3 since it was realeased without problems other than jerky video. The computor will not boot it asks for the password but does not accept it, Although I can see the Home folder it does not mount. I have tried testdisk but although it sees the partions it cannot acess them.
View 5 Replies View RelatedI just installed openSUSE 11.4 and after the installation of VirtualBox I coudn't start it. The icon at the cursor kept jumping but no response. I tried to run the binary from Konsole and I got the following message:VirtualBox: supR3HardenedVerifyFileInternal: Failed to open "/usr/lib/virtualbox/VMMR0.r0": No such file or directory (2)I checked YaST to see which packages were installed:
python-virtualbox
virtualbox
virtualbox-guest-kmp-desktop
[code]...
i have installed VLC and when i ckuick nothig happens.?
View 1 Replies View Relateddigikam doesn't start ~/.kde4 has been reset tried to copy ~/.kde4previous/*/*digikam* to .kde4 related paths running from console: riccardo@homeSUSE:~> digikam digikam: symbol lookup error: /usr/lib64/libdigikamcore.so.1: undefined symbol: _ZN6Marble12MarbleWidget11changeEventEP6QEvent
View 9 Replies View RelatedJust upgraded fireox to 3.6.6 in YAST and now FF is not luanching. Trying to launch from the CLi gives "unable to load XPCOM"
why this is happening? How can I roll back to my previous version 3.6.5?
I've recently updated Chromium to version 15.0.854.0-2.1 and it won't start now.When I start it from terminal I get the following error message:
Code:
[9537:9537:1614240504:FATAL:zygote_host_linux.cc(129)] The SUID sandbox helper binary is missing: /usr/lib/chromium/chrome-sandbox Aborting now.
[code]...
I am operating openSUSE 11.2 x86_64 KDE4.3 after installing sensors then adding
Code:
acpi_enforce_resources=no
to my optional kernel parameters and running
[code]....
This is the output when I run it from the console "can't open file '/usr/lib/exaile/exaile.py opensuse 11.3". I'm using opensuse 11.3.
View 4 Replies View RelatedIn a kde terminal, apt-get was installing gem when it asked me to restart the kmn daemon (i'm not sure about the "kmn"...) and i hit "yes" when the gui dissapeared and fell back to tty1. I waited a while and then restarted the system but kde didn't start automatically (it used to be so). I tried "startx" and "startkde" but they are unknown.
I don't know linux this deep so i don't know what to check or how to trace down this problem.
I have recently disabled nautilus from showing up on my desktop. Now I can't seem to start nautilus. Starting it from gnome-terminal doesn't display anything, and it never shows, and it never terminates. The way I disabled nautilus from showing up on my desktop was by following Xmonad/Using xmonad in Gnome - HaskellWiki
View 5 Replies View RelatedChromium doesn't start after latest updates(15.0.854.0-2.1)
Distro: openSUSE 11.4 x86_64
chromium, chromium-desktop-kde
Version: 15.0.854.0-2.1
Repo: obs://build.opensuse.org/openSUSE:11.4:Contrib
libv8-3
Version: 3.5.5.0-2.1
[Code]...
I just upgraded my home machine to 11.2 but apache is not starting automatically. I tried deleting apache2 in YaST and reinstalling it but it still doesn't start. It doesn't appear as an icon in YaST under network services either. There's a log directory for it but no logs. There's an /etc/apache2 directory.
I haven't tried starting it manually because (a) I don't want to destroy any evidence and (b) I want it to work automatically in future.
Is there something else I should be doing? Or how to diagnose?
I just installed squeeze on a raid 1 set of partitions via netinst. gde works fine. I have installed kdm and all of its dependencies (I believe), but when I select it and log in, I see the kde startup screen for a moment, then it goes blank, and goes back to the login screen. My /var/log/kdm.log is:
[Code]....
I just downloaded the F11 x64 DVD iso, and I when I try to install it, after the media check screen, Anaconda starts it load, but it says "X failed to start, falling back to text mode" (or something like that).
The install goes through (in text mode), and all that gets installed is the basic environment.
My specs:
- AMD X2 Phenom II 550 Callisto
- 4gb DDR2 800 memory
- 1tb Samsung SATA / 100gb Western Digital SATA
- 2x XFX Geforce 9600gt 1gb
- ASRock K10N780SLIX3-WIFI motherboard
I've tried Ubuntu x86 on the same system, but I was having issues with it, so I decided to try FC11 instead.
When I was using polipo on Ubuntu, it automatically start at system boot.
Now I'm using opensuse, I installed polipo from the repository, however, I have to manually start it by using "sudo polipo". If root privilege is not given, polipo won't work correctly.
What should I do to make it start at boot automatically?
a friend told me to creat /etc/boot.local, with code...
Dolphin gives errors below:
Application: Dolphin (dolphin), signal: Aborted [KCrash Handler] #6 0xffffe424 in __kernel_vsyscall () #7 0xb5bad7ff in raise () from /lib/libc.so.6 #8 0xb5baf140 in abort () from /lib/libc.so.6 #9 0xb5dc17dd in __gnu_cxx::__verbose_terminate_handler() () from /usr/lib/libstdc++.so.6 #10 0xb5dbf533 in ?? () from /usr/lib/libstdc++.so.6 #11 0xb5dbf56f in std::terminate() () from /usr/lib/libstdc++.so.6 #12 0xb5dbf6d1 in
[Code]....
Questions:
1) How can I learn which packages I've deleted or installed to make the changes back - I mean install deleted packages and delete installed by mistake?
2) Is there an instrument to make a complete system roll-back to some time point?
I've gotten everything working on my laptop except the webcam. I'm trying to use webkam (from kde repo) but the launcher starts up but the program doesn't start. The driver is "uvcvideo" which loads with no error messages.
Code:
62: USB 00.0: 0000 Unclassified device
[Created at usb.122]
UDI:
/org/freedesktop/Hal/devices/usb_device_c45_6406_noserial_if0_logicaldev_input
Unique ID: MtLc.1biges91ot8
Parent ID: k4bc.cO89g+iefn1
[Code]...
I'm using opensuse 11.4 kde 4.6. When I (try) to start libreoffice, splash window appears but program doesn't start.
When I launch it from console as normal user i don get any clue, but as root user i got this:
Code:
I run "export $(dbus-launch)" and libreoffice works, but only launching it as root user.
Yesterday, I made a clean install of 10.10 (64 bit). Among others, I installed World of Goo from a .deb file, and it worked fine.
Today, I wanted to install Skype from the .deb file. When I double-click the file, I get a "wait" cursor for ~20 sec, then nothing happens. When I try to start Software Center from the Main menu, I also get the Wait cursor and then nothing happens.
I started software-center from the terminal and the software center opened, despite some warnings in the terminal. I could install some random application from the list. Then I tried to start
Code:
And the software center window showed, with Skype selected. When I clicked Install, there was an error message. Despite the "no such a file or directory" part, I am sure that the file name is correct (I tab-completed it).
This is the error message I received when I tried to install:
Code:
Here are the warnings I received when I started the software center:
Code:
There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. Please report this error at [url] and retry.
Traceback (most recent call last):
I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.
I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.
I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
I have just visited this page here, Updating openSUSE - openSUSE I have been trying to update my OpenSuSE system for a week now and I have absolutely no idea what causes this problem. The update would start but would stop right in the middle and refuse to install some pulseaudio(...) package... It would indicate that network is down while I am sure it is up.
I am behind a proxy and I have again and again made sure that the proxy settings are correct and alright. Since it downloads some of the packages in the start I believe my connection and settings are OK. Maybe the SuSE server is down, but not for a whole week, I don't think so. I would also like to mention that I have only tried updating through YaST GUI and I am, as of yet, unaware of any console or command-line methods of updating.
I really would like to update my system because I happen to be paranoid in matters of computer security. (Just kidding) But since I cannot install any updates it should mean I might have problem installing new software. So my digital life is literally crippled because of this problem.
I am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies View Related
