OpenSUSE Install :: Desktop Doesn't Start After Boot?
Nov 13, 2010
My laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction:ATI Installer HOWTO for openSUSE usersafter installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually.i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important.now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.he graphic card is :ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
My laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction: ATI Installer HOWTO for openSUSE users after installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually. i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important. now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.the graphic card is :
ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
I have just done a fresh network install on SUSE on a new HP Proliant ML115 server. The install seemed to go OK, but on rebooting after the install I get a shell logon/prompt -- no GUI. Have tried reinstalling with the same result. If I try to run startkde I get a message that says "$DISPLAY is not set or cannot connect to the X server."
When I was using polipo on Ubuntu, it automatically start at system boot. Now I'm using opensuse, I installed polipo from the repository, however, I have to manually start it by using "sudo polipo". If root privilege is not given, polipo won't work correctly. What should I do to make it start at boot automatically?
a friend told me to creat /etc/boot.local, with code...
Sometimes when I boot openSuse 11.2, it only boots to runlevel 2 (console) I have to log in as root and enter init 5 to make kdm appear. Then I can log in normally, and everything works fine.
I got an opensuse 10.2 on a aged desktop. Once start, it just stops at command line login prompt. I have to login and type 'startx' to get the GUI. Since I haven't used this computer for over half year. I couldn't remember what I did last time. Any tips for this problem?
I was messing around with a few software install packages when I stumbled on a nvidia package for Geforce. I installed it and then later decided I didn't need it. I uninstalled it and when I booted my computer up some time later, my desktop would not load. Only in fail safe boot option do I get a desktop. Other wise It goes to command shell.I tried startxResult:
xauth: creating new authority file /root/.serverauth.3298 X.org X server 1.8.0 Release date: 2010-04-02
My wifes computor crashed during an update with a message to fill in a report. It would not respond to any key presses. The computor has been running 11.3 since it was realeased without problems other than jerky video. The computor will not boot it asks for the password but does not accept it, Although I can see the Home folder it does not mount. I have tried testdisk but although it sees the partions it cannot acess them.
I have installed Opensuse 11.4 and the desktop won't start i get an green striped screen, i have tried to run yast but it seems mine NVIDIA isn't correct installed.
I have an NVidia SE6150 Graphic Card and i have tried to configure the startup parameter vga=0x317, i have changed this to vga=0 to get vesa mode but that doesn't work, i have an wide screen monitor that supports 24 bit and 1360x768.
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
I got the serious problem after update my opensuse 11.2, after update the message appeared and said restart my machine to updates take effect and after restart system doesn't boot GUI workspace it boot into text like space named "Emerald - Kernel 2.6.31.8.0.1 - desktop (tty1)".What can I do to boot my machine into GUI again?
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory bash: ./etc/sysconfig/chron : cannot execute binary file X_MOUSE_CURSOR : Undefined variable
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow: Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11) Processor: AMD Phenom X3 8450 Memory: 2GB Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers) OpenSUSE 11.4 KDE 4.6.0 Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
I've recently added a new hard disk and due to mother board controllers this new hard disk is known as sda.Before that my boot partition was /dev/sda3 and know this changed to sdb3.Whenever grub menu appears and I choose opensuse,it can't find /dev/sda3 .It seems that I should edit menu.lst or change boot loader parameter.something like root (hd1,2).But I don't how I can do this with opensuse boot loader.Though I could do this with CentOS easily.
I had a working setup of opensuse 11.0, dual booting using grub installed on the home partition. I tried to install 11.3 from the coverdisc of linux format (LXFDVD136). It took 5 goes before the install succeeded. Mostly stopping at the "boot installed system" stage. I put 11.3 on a formatted partition in the same place as 11.0, and put grub there too.
The system will not boot without assistance. I have to use a supergrub disc and tell it which partition to boot. If I use boot linux from supergrub I get the Grub error message 15 file not found. Supergrub CAN find windows and it boots with the win command. Automatic and yast initiated attempts to check for software upgrades are blocked by the application with pid 4587.
I use Fedora 13 x86_64. Recently i installed q4 wine and booting froze with message "registering binary handler for windows applications". Then on removing q4 wine boot froze at "unexpectedly disconnected from boot status daemon".I also removed wine, smolt.
I installed slax to my hard drive. I am using ubuntu. In fact I think to install xp that partition of my disk but I want to try it on disk. It was ext3 already my partion which disk I was installed slax. I did my job by following commands I quoted. But my disk was sda1 and I changed command according to that. for example I gave some commands like this ( /mnt/sda1/slax ) Then my slax working but kde doesn't start. when I gave startx command it try to start. I can see desktop wallpaper but then it comes to start kde parts it turns [URL]
I wonder how could I start my ruby on rails mongrel_cluster at the start of my openSUSE 11.0 Server and I don't have a GUI. So the shell solution would be good.
Trying to booting an Acer TM 8371 Notebook using USB flash media and the openSUSE-11.2-KDE4-LiveCD-x86_64 image.
After the BIOS greeting messages nothing more happens. System seems to hang. When removing the USB memory stick the system continues on trying to boot from the hdd.
When using the openSUSE-11.2-NET-x86_64 image, system detects the USB stick properly and retrieves it's ip address. Since there is no PXE system set up, installation of course stops thereafter.
What's the difference between both images? I recognized that when using the openSUSE-11.2-KDE4-LiveCD-x86_64 image a partition with type linux is created on the USB stick. When using the openSUSE-11.2-NET-x86_64 image fdisk says:
"Disk /dev/sda doesn't contain a valid partition table".
I recently updated to Ubuntu 10.04. On this same machine I've used Ubuntu for 3 or 4 years now. Upgrading from 8 - 9 - 10. I love Ubuntu and use it as my everyday work environment. Anyway, recently when I start my machine in the morning it boots to commandline instead of the desktop. For the last couple days I boot to safe-mode and do a package repair. Sometimes more than once. Eventually I get the desktop to start but it is annoying. When trying to boot to Fail Safe Graphics Mode(?) I get an error stating: "Fatal Server Error: No Screens." The message referred me to /var/log/Xorg/failsafe.log. Here is a snippet of the end of that log file:
[code]...
Also, I'm using an NVidia graphics card on an HP machine. I installed the "current version" accelerated graphics driver which it says is proprietary.
I have Slackware 13.1 x64 and my graphic card is ATI Radeon HD 2400 on my laptop. I install from ATI official site driver for this card and now when I try to come in System Settings->Desktop I got this error:
I am using SUSE 11.2. And I am really baffled with a strange NFS problem.I have set up the fstab on the client and exports on the server correctly, because if I manually run # /etc/init.d/nfs startStarting NFS client services: sm-notify doneI can see and use the NFS partition perfectly, there is no problem at all.But nfs cannot successfully start at boot. In yast, I have enabled nfs in "System Services (Runlevel)" at runlevel 3 and 5. So it should run automatically, but I always get the following error message:
I have just installed OPENSUSE 11.3 from a CD to a computer running WIN XP. The installation completed and I got to a desktop. I then shut down. When I restarted the computer with the installation CD removed from the drive, I got the message "missing operating system". I ran the installation again, and have left it running. As near as I can tell, the WIN Partition is still intact, but I'm afraid to shut it down for fear I once again will not be able to access either system.
I am completely fed up trying to do it. I had no problems with 11.0. It refuses to start up during boot like tor. I added tor to the kde start menu and it works just fine after boot. Privoxy refuses to start up during boot. I have to go into SU mode in terminal, then it works. I need to be able to start Privoxy the same way. I tried everything from chown / chmod commands, and it made no difference. I have it set for 777, and my name along with root. I also added the group privoxy to my user ID. I need the computer to disregard that it is a root program.
So I have looked everywhere, I see the ssh script in /etc/init.d everything seems to check out with chkconfig (shows 3 and 5). But for some reason my SSHD server doesn't start on boot till I run either rcsshd start or /etc/init.d/ssh start.
Yesterday I used gparted to shrink win xp partition and to expand opensuse. When I try to reboot my laptop it doesn't boot anything, and it doesn't dislay on the screen anything like missing grub, grub rescue. I have opensuse 11.1 gnome on acer 5920g
i just downloaded openSUSE 11.4,i used to burn the .iso file to a cd and then boot using the CD. recently my cd/dvd writer crashed and i was wondering could i boot from my pen drive in such cases,i also prepared a bootable pen drive but in my BIOS settings there is no option visble for such booting.
