Fedora Installation :: X Doesn't Start On Fresh Install (x64)
Jul 31, 2009
I just downloaded the F11 x64 DVD iso, and I when I try to install it, after the media check screen, Anaconda starts it load, but it says "X failed to start, falling back to text mode" (or something like that).
The install goes through (in text mode), and all that gets installed is the basic environment.
My specs:
- AMD X2 Phenom II 550 Callisto
- 4gb DDR2 800 memory
- 1tb Samsung SATA / 100gb Western Digital SATA
- 2x XFX Geforce 9600gt 1gb
- ASRock K10N780SLIX3-WIFI motherboard
I've tried Ubuntu x86 on the same system, but I was having issues with it, so I decided to try FC11 instead.
View 7 Replies
ADVERTISEMENT
Oct 25, 2010
I'm trying to install Ubuntu 10.10 from a USB stick but neither the install nor the LiveCD will recognise my Hard Disk Drive. They only recognise the USB stick and report that install cannot proceed without at least 2.6GB freespace (of which of course there isn't on the USB stick).
I've installed Ubuntu on a couple of systems before but this is the most advanced and I'm certainly no expert. It's an ASUS P6X58D-E mobo with two WD600GB SATA3 HDD's setup in RAID1 configuration. It's already running W7Ultimate x64 OK on it's own 150GB partition. Of course I can't even run gparted from the LiveCD to repartition. I suspect the problem is the RAID config, but not sure what to do.
View 8 Replies
View Related
Sep 17, 2014
I recently have started playing with various distros (Mostly just Zorin and Debian) and have been trying to find a GUI I can actually comfortably use without wanting to punch my screen. This lead me to cinnamon which looks like something I could actually use.
I performed a fresh installation of Debian Jessie without the desktop environment and print server (System Utilities or whatever that option is called was left checked) and after the system installed and booted I proceeded to login as the root and install cinnamon. Unfortunately afterwards my system would be nothing but a black screen with a box saying that cinnamon had crashed and was running in fallback mode.
However if I let a fresh installation install the default GUI of xfce and then perform the cinnamon installation, cinnamon will install and run. My question is why doesn't a clean install with cinnamon work but installing cinnamon after another gui does? I don't get any apparent error messages beyond cinnamon crashing and I'm still fairly new to Linux.
View 11 Replies
View Related
Jul 28, 2010
I just installed Fedora 13 on a new computer and the timed login for gnome does not work unless you manually select it. This surprised me as I upgraded a separate computer to Fedora 13 and the timed login feature still correctly functions and does not require user interaction.
Code:
[daemon]
TimedLoginEnable=true
TimedLogin=<username>
TimedLoginDelay=3
Adding the above to /etc/gdm/custom.conf only adds an Automatic Login option that you have to manually select and then the computer will login. I would deem this less than useful.
Code:
[daemon]
AutomaticLoginEnable=true
AutomaticLogin=<username>
I know you can substitute the timed login with the automatic login and it will instantly login, but this provides no option to select another user. I have been unable to find any information why this feature no longer works and wanted to know if there is a new way or if anyone knows why the timed login feature was crippled.
View 1 Replies
View Related
May 12, 2010
I am trying to install Fedora 12 from the Live CD to a hard drive that only has a Windows XP partition on it. While I can boot up fine, when I click the "install to hard drive" icon, the program shows in the taskbar for a few seconds, and there's a red light coming from my computer, but the program doesn't launch. The first time I ran it, it did work, but I decided to not install it then. How can I get it to run? Do I have to burn the install CD again?
View 6 Replies
View Related
Feb 16, 2010
I recently bought an F12 DVD (from a UK supplier) which I took to be a "full distribution". But looking back on the web site it was not described as such. After booting I selected the Replace Existing Linux System option and it listed the installation of 204 packages - much smaller than the 933 packages when I installed F9.
The kernel is now FEDORA (2.6.31.5-127.fc12.i686.PAE)
My problem is that I am now faced with a very intimidating terminal. I am sure the installation did not offer a graphical interface. I have tried to get Gnome running by following the Installation Guide :-
1) 7.4.2 Booting into a Graphical Environment
I type in -gedit /etc/inittab
and I get back --bash: gedit: command not found
2) 15.3 Switching to a Graphical Login
I type -yum group install "GNOME Desktop Environment"
Response -Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again.
3) Again under 15.3 - bullet point 3)
Type -/etc/inittab
Response --bash: /etc/inittab: permission denied
I have now run out of ideas. I'm sure it is not supposed to be difficult but I don't understand the implications of the command line responses. I really don't want to be condemned to a win dependency.
View 8 Replies
View Related
Oct 1, 2009
I recently finished a fresh reinstall of Fedora 11 on my ASUS EeePC 1000HA today. Once I rebooted, it asked for the usual "first time user thing" and I proceeded. After that screen, I was brought to the loging manager, so I logged in, and was presented with my destkop. I fired up the terminal, added myself to the sudoer's file and did a "sudo yum update" but was given the following error (the beginning of the text got cut off due to how lengthy the update list was): [URL].
View 3 Replies
View Related
Dec 2, 2009
I have just installed F 12 - clean install- but when I go to get updates today (Dec 2nd) no updates appear.I have done yum clean and yum makecache but still no updates available in software updates
View 8 Replies
View Related
May 28, 2011
I decide to install F15 (other machines run F14) and after a pretty smooth install and reboot, I try to login and get the message "Oh no, something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again". But no matter how long I try, I keep getting this message. Then I go to crt-alt-F2, and try to "yum install gnome-panel". Then it shows that I don't have any network connection at all, even though I did install my network. I'm thinking of installing F14 now.
View 2 Replies
View Related
Mar 27, 2009
All, just did a freash install of fedora 10, and I have no sounds at all. Speakers work and are pluged in (everything works fine with my ubuntu partition) Nothing appears to be muted in alsa or on the gnome volume control Sound card = Creative Labs CA0106 Soundblaster
[code]...
View 4 Replies
View Related
Dec 8, 2009
Ok, I booted with the live cd and used Fdisk to delete all partitions and wipe the drive. I used the "Replace existing Linux system" install option and let it roll. So I reboot to the screen Flashing a _ then just black...System Info:GIGABYTE GA-EP45-UD3L LGA 775 Intel P45 ATX Intel Motherboard Intel Core 2 Quad Q6600 Kentsfield 2.4GHz 2 x 4MB L2 Cache LGA 775 Quad-Core Processor MSI R4850-T2D512 Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video CardSeagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard DriveKingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model KHX8500D2K2/2GRYes i did just copy my old newegg orders I'm brand new to fedora as well so I apologize if this a newb mistake.---------- Post added at 05:54 PM CST ---------- Previous post was at 03:41 PM CST ----------Update: I went and wiped the drive again and tried a different install method (use entire drive)After rebooting i spammed esc and got into grub and loaded fedora in nomodeset After going thro all the lisence and reg stuff it prompted me to log in, I did and once again im left with a black screen with a _
View 11 Replies
View Related
Jun 7, 2010
I'm currently running F11 and am trying to replace it with a fresh install of F13, using the same partitioning layout. I downloaded the F13 i386 DVD ISO using bit torrent. (The sha256sum of my downloaded ISO matches the reference sha256sum value.) I'm trying to do the fresh install of this ISO from hard drive (without burning a DVD). Last summer I did the same procedure of installing a downloaded DVD ISO from HDD when replacing F9 with F11. The installer (Anaconda 13.42) proceeds to the point where I specify my custom partitioning layout. It then prompts me about storing a boot loader. Shortly after I reply to that, the installer gets an "unhandled exception".
rpmdb: Program version 4.8 doesn't match environment version 4.7
error: db3 error (-30971) from dbenv -> open: DB_VERSION_MISMATCH
The only nonstandard thing I did was the following. According to the F13 installation guide, for installation from HDD the file "install.img" from within the ISO files must be copied to a directory named "images". The F13 installation guide gives the following procedure:
mount -t iso9660 /path/to/Fedora13.iso /mnt/point -o loop,ro
cp -pr /mnt/point/images /path/images/
umount /mnt/point
Instead, I used "Archive Manager" to extract "install.img" from my DVD ISO. I copied it to a directory named "images".
View 9 Replies
View Related
Sep 14, 2010
I've installed F13 on a DELL computer. Everything works fine except that under KDE menu if I click on 'shutdown', I have the confirmation windows but the computer never shutdown. Same issue with the the logout button. If I want to stop my commuter I have to open a terminal and type " shutdown now" or "halt".
View 1 Replies
View Related
Jan 12, 2009
I'm stuck with installing Fedora Core I have 2 hard drives both 80Gb I want to install a fresh copy on one of the drives to do a dual boot I have vista on the main hard drive this is where I am at Installation requires partitioning of your hard drive by default, a partitioning layout is chosen which is reasonable for most users. You can either choose to use this or create your owe. Select the drive to use for this installation?
View 10 Replies
View Related
Feb 24, 2011
I've now tried several times to install a fresh copy Fedora 13 i386 on my old Dell laptop, but each time I reboot the laptop I get the first-time welcome screen which asks you to create a user. When I re-enter my user info, it tells me that there's already a folder created for that user. After rebooting, I'm back to that screen. Does anyone know what's going on here?
View 2 Replies
View Related
May 31, 2011
I installed fedora 15 and i m not able to change the monitor resolution. if I open the display settings I just get the choice between 1024x768 and 800x600.
View 3 Replies
View Related
Jun 25, 2011
As the thread title suggests, I am getting error messages while trying to update a fresh install of the 64-bit desktop edition. Here are the errors:
Code:
Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 2316, in _update_packages
txmbr = self.yumbase.update(po=pkg)
File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 3761, in update
available_pkg, updated_pkg)
[Code]...
View 2 Replies
View Related
Jun 29, 2011
I have just fresh installed Fedora 15 over my (very) old copy of Fedora 11. I wanted to play around with Linux.
Anyway, when I log in, I get the "Oh no! Something has gone wrong" (like I stated).
View 3 Replies
View Related
Jun 29, 2011
I have just installed Fedora 15. I have tried both the desktop edition and the LXDE Spin on an AMD X2 64 5800+. It's hard-drive so I select "Use All Space", meaning all the partitions will be removed and recreated. The installation completes normally, when I reboot without the CD, I get the screen with blinking cursor same as [URL]... Adding intel_iommu=off to the grub.conf did not help. I presume the default installer works correctly however the installed boot configuration puzzles me. The boot partition is /dev/sda1 and the mount point is /boot. If boot from the cd after the installation, I mount:
[code]...
Is this how it should be? This is me being new to Linux probably, but I should /boot contain the boot information if that's where the boot partition is mounted? Is there any way to "turn on debugging" so I can get a better insight on what's not happening?
View 2 Replies
View Related
Dec 9, 2009
I just installed Fedora 12 on my HP laptop. And everthing has gone smooth, and I decided to reboot my machine. And it rebooted and the Fedora Loading logo camep and after it finished, it went to a black screen with a "|" just flashing and it's stuck on that
View 8 Replies
View Related
Sep 1, 2010
Xorg fails to start on fresh install with 2x GTX285
View 3 Replies
View Related
Jan 13, 2011
Specifically, libgtk2.0-cil, seems to be giving me a world of trouble.
I tried to install mono so that I could use an application. When it went to install libgtk2.0-cil, everything broke. I've tried to reinstall, purge, remove, and each time it fails. I've gone through a few iterations of trying to get things to remove cleanly to start fresh, so there are a few packages that are dependent on libgtk2.0-cil causing issues as well.. but thats to be expected. code...
I tried, and cannot locate the files it notes; `/usr/share/cli-common/packages.d/policy.2.6.gtk-dotnet.installcligac. I tried to create them real quick with touch, it removes what I make but still does not uninstall and still gives the err.
Can anyone offer assistance on removing this so that I can start fresh?
View 2 Replies
View Related
Apr 3, 2009
Fc11 installed well, it was related to a particular sata driver perhaps The installation went well up to the reboot, and then displayed the message saying that LogVol00 was not found. 3ware sata raid card, usually it installs without error
View 2 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
Mar 4, 2010
after fresh f12 install says reboot & i do... no boot menu, boots xp. there's probably a solution, but i don't know it. someone know how to get around this?
View 10 Replies
View Related
Aug 20, 2010
I downloaded the iso from the webpage and used the live cd option. From there I chose install and proceeded to install the OS. Everything went fine and I got a message that the system would need to restart without the live cd. I saw the chameleon with the white growing line under (which seemed to run to it's completion) and then I came to a screen mostly white with three option buttons in the bottom right corner and my mouse with the waiting symbol spinning in the middle of the screen. Basicly the symbols stops spinning after a little while and the system hangs. I have tried starting in fail safe mode and run level 3 with the same result. My laptop is a MSI GX740
Edit: I have tried both ubuntu and mint earlier today and those Live CDs wouldn't even start. Also I am using the CD size Gnome ISO. Maybe some of the content on the dvd iso would provide support for my HW?
View 9 Replies
View Related
May 14, 2011
Code:
sudo /etc/init.d/cups restart
results in
[code]....
View 1 Replies
View Related
Sep 27, 2010
installed vmm, then when i tried mounting i get this error message;Unable to open a connection to the libvirt management daemon.
View 3 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
May 25, 2010
My Intel D945GCPE doesn't boot fresh installation of Linux after "under Warranty Replacement" of it. I have tried to install Fedora 9,10, RHEL 5, Zenwalk on dual boot with windows Xp. i.e. First Win XP then Linux.
The Linux Install perfectly but when i reboot after the installation, BIOS tries to detect PXE boot. I have both custom partitioning scheme and Auto-Partitioning on Free unpartitioned space. I have tried this 5 times with the aforesaid distributions, but failure!
In fact I have done the same number of times even earlier but before Board Replacement. Board works perfectly with Win Xp, and 2008 Server.
System Configuration:
Core2Duo 2.2
2 GB RAM
Intel D945GCPE MotherBoard (Replaced)
View 3 Replies
View Related
