Debian :: Kde Doesn't Start After Apt-get Install / Trace Down This?

Aug 31, 2010

In a kde terminal, apt-get was installing gem when it asked me to restart the kmn daemon (i'm not sure about the "kmn"...) and i hit "yes" when the gui dissapeared and fell back to tty1. I waited a while and then restarted the system but kde didn't start automatically (it used to be so). I tried "startx" and "startkde" but they are unknown.
I don't know linux this deep so i don't know what to check or how to trace down this problem.

View 10 Replies


ADVERTISEMENT

Debian Multimedia :: Kde Doesn't Start But Gde Does In New Squeeze Install

Oct 10, 2010

I just installed squeeze on a raid 1 set of partitions via netinst. gde works fine. I have installed kdm and all of its dependencies (I believe), but when I select it and log in, I see the kde startup screen for a moment, then it goes blank, and goes back to the login screen. My /var/log/kdm.log is:

[Code]....

View 3 Replies View Related

Hardware :: USB Pen Not Recognized - Doesn't Appear In List In /dev No Trace

May 11, 2011

i have a usb pen (kingstone 8 gb) the sistem does not recognize it, maybe due to the fact i have not safely removed it the last time. i do fdisk -l but it does not appear in the list in /dev no trace of it.

View 3 Replies View Related

Fedora Installation :: Nvidia Driver Causes Stack Trace On Service Start

Apr 4, 2009

Just installed a Sparkle GeForce 8400 GS on my Dell Dimension 2350 running FC9. As stated, every time the system goes to start the card, a stack trace occurs. I know the first thing that everyone will ask for is the output from the stack trace, but for the life of me I can't capture it. Tried grabbing the STDOUT and SDTERR from the 'service start' command, but nothing interesting is ever there. If anyone knows if and where such things get stored, just letting me know that would help. I assumed there would be something in /var/log, but no. For some reason, there's a lot of python errors in the output. I imagine I could try to type in as much of the output as possible, but I'm hoping someone has seen this before.

Anyway, I've tried the Nvidia install executable, the nvidia-newest RPMs, the nvidia-96xx RPMs and they all fail the same way. I also can't get the card to come up as the primary device on boot, which I don't think should be a problem since they all boot into VGA mode, don't they? If I disable the internal video setup in the BIOS, the machine freezes on bootup with blinking lights on the keyboard, which I imagine is the BIOS's way of telling me there's no monitor available.

I also tried getting the nv and nouveau drivers going with no luck. They are installed on the machine, but I'm embarrassed to say I don't know how to get them configured. Not really a driver guy, I guess. Also, the reason I installed this card is to get TVOUT, and I don't know if generic drivers will have support for that sort of thing.

At this point, I'm just looking for a way forward. One thing I remember is that when I removed the 'fglrx' drivers (because they conflicted with the NVIDIA stuff) I remember that a few python/fglrx based packages went with it. I'm wondering if that could be at the root of the failure, given the python errors in the stack trace.

View 14 Replies View Related

Debian :: Eclipse Doesn't Start

Jun 29, 2015

have intalled Debian 8 on bi quad cores opteron, also Tomcat 8 and openjdk7 are installed, i have do a mistake about version eclipse because i have installed eclipse Kepler or the lasted version of eclipse is Luna, after douwload Luna, i have deleted eclipse kepler who was installed in /opt directory, i do the command "tar" for luna version, no problems for instaling, but eclipse luna doesn't work.I try many version of luna like 32bits and 64 bits, but nothing to do the IDE doesn't start.

Code: Select allroot@dct-skyned:/opt/eclipse# ls
about_files    configuration  eclipse.ini   icon.xpm    plugins
about.html     dropins         epl-v10.html  notice.html  readme
artifacts.xml  eclipse         features       p2
root@dct-skyned:/opt/eclipse# ./eclipse
bash: ./eclipse: Aucun fichier ou dossier de ce type
root@dct-skyned:/opt/eclipse#

View 9 Replies View Related

OpenSUSE Install :: X Doesn't Start Sometimes

Jan 1, 2010

Sometimes when I boot openSuse 11.2, it only boots to runlevel 2 (console) I have to log in as root and enter init 5 to make kdm appear. Then I can log in normally, and everything works fine.

View 9 Replies View Related

Debian :: Apache2 Doesn't Start With Log Files Save To RAM?

Dec 12, 2010

I have apache2 running under debian squeeze on a Seagate DockStar of a USB flash drive. To reduce the wear on the USB stick, I want to move all log files to RAM. What I did was to update create an entry in /etc/fstab to mount /var/log to tmpfs.Things seems to work except apache2. y start apache2, it complains aboutStarting web server:apache2(2)No such file or directory: apache2: could not open error log file /var/log/apache2/error.log.If I create the file, apache2 starts fine. Is there a step or two I am missing so I don't need to do this every time I reboot

View 1 Replies View Related

Debian Configuration :: MySQL Server Doesn't Start

Jun 18, 2015

Since upgrading from Wheezy to Jessie I have not been able to start the MySQL-server. When I do a "systemctl start mysql" I get the following answer on the console:

Job for mysql.service failed. See 'systemctl status mysql.service' and 'journalctl -xn' for details.
Entering 'systemctl status mysql.service' the answer is:
● mysql.service - LSB: Start and stop the mysql database server daemon
Loaded: loaded (/etc/init.d/mysql)
Active: failed (Result: exit-code) since Don 2015-06-18 18:35:41 CEST; 4min 1s ago
Process: 11272 ExecStart=/etc/init.d/mysql start (code=exited, status=1/FAILURE)

syslog and hostname.err don't show any pertinent messages.

View 4 Replies View Related

Debian Configuration :: Nm-applet Doesn't Start After (Testing)

Feb 22, 2016

After the latest update of network-manager-gnome to version 1.1.90-3 , I see that I have to start the nm-applet in Testing from a terminal, otherwise I can't bring up my wired connection.

The usual nmcli networking on command is failing to connect, also restarting the network-manager.service with systemctl doesn't do anything, the only way to connect at this time is indeed to manually start the nm-applet from a terminal.

I've also spotted this message in the logs:

Code: Select alltraps: nm-applet[1105] general protection ip error:0 in libgobject-2.0.so.0.4600.2

Could it be something wrong with my configuration (although , it worked before this update) or is it some bug in network-manager-gnome 1.1.90 ?

View 4 Replies View Related

Debian Multimedia :: Kde 4.6 Doesn't Start, Freezes At Splashscreen?

Aug 12, 2011

have the following issues with kde: when I try to login it shows a blackscreen with black cross-shaped pointer for a moment and then again login box appears. When I execute startx from tty kde loading freezes at splashscreen: I see all icons in a row but the last one (KDE button) is blurred.I have debian wheezy/sid, kernel 2.6.37.2, xserver-xorg 7.6+7, xserver-xorg-core 1.10.3-1, nvidia driver version 275.21.Here are logs.

kdm.log:
X.Org X Server 1.10.3
Release Date: 2011-07-08

[code].....

View 5 Replies View Related

Debian Hardware :: Bumblebeed Service Doesn't Start

May 9, 2014

I've installed bumblebee following this : URL...But i think bumblebeed daemon doesn't start.

if I do:
Code: Select all# service bumblebeed start
or
Code: Select all# service bumblebeed stop
or
Code: Select all# /etc/init.d/bumblebeed start
ecc.
i got no output. No errors... nothing.

but if I use another service it works...for example:

Code: Select all# /etc/init.d/network-manager start
[ ok ] Starting network connection manager: NetworkManager.

View 6 Replies View Related

Debian Hardware :: X Doesn't Start With Radeon 9200

Mar 11, 2011

I changed my graphics card from Nvidia GeForce 2 MX200 (drivers I used were nouveau) to ATI Radeon 9200SE (now drivers should be radeon). Unfortunately I couldn't get X to start. It leaves me to black screen with white cursor blinking. Both cards are AGP on old Slot 1 motherboard. Reason for change was that GeForce didn't support interlacing on VGA. There are no updates installed to Debian (Squeeze), because there is no internet connection on this computer currently. I tried few things but they didn't work:

* I tried to reconfigure xserver-xorg, didn't help
* I tried to make xorg.conf with X -configure and then moved it to correct place, didn't help
* I tried radeon.modeset=0 option, but it didn't help, I had some other problems with this but I think it's not important (I'll tell later if needed)

I tested Fedora 15 Alpha XFCE LiveCD, but it didn't boot because of my CPU I guess (VIA C3 1 GHz, Nehalem core). I also tested Ubuntu 10.04 LiveCD, but it told that there was an error with radeon and low graphics mode is needed or something like that. So it was as bad as Debian. I took few logs and stuff to pastebin.

Xorg.0.log
dmesg
lspci

View 4 Replies View Related

Debian Programming :: How To Trace Broken LIB Files

Dec 5, 2014

The usual answer is debian's ldd(1) and I found broken things due to past lib abuses I previously hadn't understood I'd did - or rather hadn't realized because by looking it "looked ok and worked" - but i had problems. many i fixed.

After I ran a new script: it showed some i'd STILL missed after carefully re-doing /lib by hand (and using /var/lib/dpkg/info/libs.list)

I just made something that might be nice. seems to be the only thing that does it. but its' small and quick and has (tty/stdout) output still.

the had part isn't finding info, objdump(1) does that wonderfully : it's using it..

View 4 Replies View Related

OpenSUSE Install :: KDE Doesn't Start On Boot?

May 5, 2010

I have just done a fresh network install on SUSE on a new HP Proliant ML115 server. The install seemed to go OK, but on rebooting after the install I get a shell logon/prompt -- no GUI. Have tried reinstalling with the same result. If I try to run startkde I get a message that says "$DISPLAY is not set or cannot connect to the X server."

How do I resolve this?

View 3 Replies View Related

OpenSUSE Install :: 10.2 Doesn't Start To GUI And Have To Use Startx?

May 20, 2010

I got an opensuse 10.2 on a aged desktop. Once start, it just stops at command line login prompt. I have to login and type 'startx' to get the GUI. Since I haven't used this computer for over half year. I couldn't remember what I did last time. Any tips for this problem?

View 4 Replies View Related

Debian Configuration :: Apache2 Doesn't Start At Boot Time?

Dec 6, 2010

I am running Debian-Squeeze with apache2. However, apache2 doesn't start at boot time, even though there is of course the required script in init.d. I can start it later on using "/etc/init.d/apache2 start". I have checked the configuration with "apachectl configtest" - giving the answer "Syntax ok". How do I get it to start automatically at boot time?

View 1 Replies View Related

Debian Multimedia :: SMplayer Doesn't Automatically Start Playback

May 22, 2011

I have avi, mpeg etc files associated with SMplayer. When I double click a file SMplayer DOES lunch but it never starts the playback. Not even the play key is active, and the seek bar and volume bar are frozen. If I go Open-->File and chose a file, everything works great.

View 14 Replies View Related

Fedora Installation :: X Doesn't Start On Fresh Install (x64)

Jul 31, 2009

I just downloaded the F11 x64 DVD iso, and I when I try to install it, after the media check screen, Anaconda starts it load, but it says "X failed to start, falling back to text mode" (or something like that).
The install goes through (in text mode), and all that gets installed is the basic environment.

My specs:
- AMD X2 Phenom II 550 Callisto
- 4gb DDR2 800 memory
- 1tb Samsung SATA / 100gb Western Digital SATA
- 2x XFX Geforce 9600gt 1gb
- ASRock K10N780SLIX3-WIFI motherboard

I've tried Ubuntu x86 on the same system, but I was having issues with it, so I decided to try FC11 instead.

View 7 Replies View Related

OpenSUSE Install :: Desktop Doesn't Start After Boot?

Nov 13, 2010

My laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction:ATI Installer HOWTO for openSUSE usersafter installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually.i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important.now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.he graphic card is :ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.

View 9 Replies View Related

OpenSUSE Install :: Desktop Doesn't Start After Boot

Jul 22, 2010

My laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction: ATI Installer HOWTO for openSUSE users after installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually. i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important. now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.the graphic card is :

ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.

View 6 Replies View Related

Debian Installation :: Lenny - +Adaptec 3405 - Installs Ok But Doesn't Start

Feb 22, 2010

I'm installing a file server on Lenny (Samba on RAID5, nothing exotic)

First, I installed on a basic SATA drive, to check everything else in the system was recognized correctly. Success.

Then, I added my 3405 Adaptec board, with a 3 drive RAID5, and reinstalled, still on the lone SATA disk.

Install runs ok, shows correctly the 3405 board, detects the logical drive alongside with the SATA drive. Smooth. I install Lenny on the SATA drive, planning to use the RAID5 for later partitioning and data storage. During install, the SATA disk is shown as SCSI-1 and the RAID5 disk as SCSI-2. Again, install completes correctly.

But on reboot and after selecting the default config, the system complains it can't find /dev/sda1!

If I remove the 3405 board, Lenny boots fine.

Is the presence of the Adaptec board and RAID5 drive changing the numbering of the disks, so that the SATA disk is no longer seen as /dev/sda1 ?

View 2 Replies View Related

Debian :: Gnome Administrations Tools Missing - Installation Doesn't Start

Jan 13, 2011

i installed debian cd 1 on a school's computer however, some administration tools are missing (like add/remove programs...) , i tried to install the full gnome but the installation doesn't start

Pmaison:/home/pmaison# aptitude install gnome Lecture des listes de paquets... Fait Construction de l'arbre des dpendances Lecture des informations d'tat... Fait Lecture de l'information d'tat tendu nitialisation de l'tat des paquets... Fait Lecture des descriptions de tches... Fait Pas de version candidate trouve pour gnome....

View 5 Replies View Related

OpenSUSE Install :: 11.3 Crash Can't Start - Computer Doesn't Accept Password

Oct 7, 2010

My wifes computor crashed during an update with a message to fill in a report. It would not respond to any key presses. The computor has been running 11.3 since it was realeased without problems other than jerky video. The computor will not boot it asks for the password but does not accept it, Although I can see the Home folder it does not mount. I have tried testdisk but although it sees the partions it cannot acess them.

View 5 Replies View Related

Ubuntu :: Cannot Install .deb Files Any More - Software Center Doesn't Start From Main Menu

Oct 31, 2010

Yesterday, I made a clean install of 10.10 (64 bit). Among others, I installed World of Goo from a .deb file, and it worked fine.

Today, I wanted to install Skype from the .deb file. When I double-click the file, I get a "wait" cursor for ~20 sec, then nothing happens. When I try to start Software Center from the Main menu, I also get the Wait cursor and then nothing happens.

I started software-center from the terminal and the software center opened, despite some warnings in the terminal. I could install some random application from the list. Then I tried to start

Code:

And the software center window showed, with Skype selected. When I clicked Install, there was an error message. Despite the "no such a file or directory" part, I am sure that the file name is correct (I tab-completed it).

This is the error message I received when I tried to install:

Code:

Here are the warnings I received when I started the software center:

Code:

There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. Please report this error at [url] and retry.

Traceback (most recent call last):

View 5 Replies View Related

General :: Install Proxy - Apache - Server - Trace The User Activities ?

Sep 3, 2009

OS :red hat 4.2 oracle EBS SUITE Applications:11.5.10

Iwould like to install Proxy(Apache) server on linux.is it possible?

I would like to trace the user activities by proxy server. we are running many applications on that.How to trace that.is there any server better than Apcache?

View 3 Replies View Related

Ubuntu :: 11.04 Slow - Start Up Time Is 30 Minutes But It Usually Doesn't Start Up At All

May 4, 2011

I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.

I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.

I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.

View 8 Replies View Related

CentOS 5 Server :: DHCPD Doesn't Start - How To Make It Start

Sep 2, 2010

I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !

DHCPD.CONF
ddns-update-style interim;
ignore client-updates;

[code].....

View 3 Replies View Related

Debian :: Install To Start From Scratch - Initial Install Choices?

Oct 6, 2010

I'm trying to install phpmyadmin and I mistakenly marked SSL configuration which I don't use. I then uninstalled the app but every time I install it uses the same configuration. How can I force the install to start from scratch and give me the initial install choices?

View 2 Replies View Related

Debian Hardware :: Downloaded Catalyst 9.3 And Tried To Install, But It Doesn't Want To Install?

Jun 30, 2010

I downloaded Catalyst 9.3 and tried to install, but it doesn't want to install, sorry, but i can't paste you error message, because my laptop is far away from me now. I can do it tomorrow. May be it is just impossible to install ATI Catalyst 9,3 on lenny and i should try a lower version of Debian? Could u suggest me what to do? I searched over the net for a long period of time, but found nothing relevant to my problem.

View 2 Replies View Related

Fedora Installation :: 12 "Install To HD" Doesn't Start

May 12, 2010

I am trying to install Fedora 12 from the Live CD to a hard drive that only has a Windows XP partition on it. While I can boot up fine, when I click the "install to hard drive" icon, the program shows in the taskbar for a few seconds, and there's a red light coming from my computer, but the program doesn't launch. The first time I ran it, it did work, but I decided to not install it then. How can I get it to run? Do I have to burn the install CD again?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved