Just upgraded fireox to 3.6.6 in YAST and now FF is not luanching. Trying to launch from the CLi gives "unable to load XPCOM"
why this is happening? How can I roll back to my previous version 3.6.5?
I have a strange problem on firefox. Homepage doesn't appear when I start firefox and bookmarks are missing. The strange part is that if I run firefox as superuser everything works fine.
ps: I use ubuntu 8.10
After upgrade to Ubuntu 10.04 I realized that Firefox doesn't start, it just shows "Firefox starting"on the taskbar for a second and then dissapear. New Gwibber software doesn't start either.I have separate /home partion and installed new version to the system partition marked it to be formatted first. Opera browser works perfectly fine.
View 1 Replies View Relatedwhy firefox is not started if I use scheduler command 'at'. I can start firefox from terminal. But when I use 'at hours:min' it doesn't start. I tried 'firefox &' but it doesn't start too. If instead of 'firefox' I use 'mv fileName1 fileName2' the file is renamed as expected.
Code: at now
warning: commands will be executed using /bin/sh
at> firefox &
at> <EOT> (it works with other commands)
this morning I got a bad surprise: Firefox doesn't start upon my click on its icon.
Tried to uninstall and reinstall Firefox.... Even its icon disappeared from menus after reinstallation (no way to see it in the menu editor). I tried to start it from command line:
code
firefox %u
and got this reply from Ubuntu:
GLib-WARNING **: g_set_prgname() called multiple times
I am using Chrome now but I had some useful add-ons on Firefox and wouldn't like to loose them...
I installed CentOS 5.3 without major problems, and customized the installation to my heart's content, but I still do not have flash plugin active when I first open firefox. I have to close the first firefox window and from the second instance of firefox, the flash plugin works without any problem.
Here is my setup:
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.0.10) Gecko/2009042718 CentOS/3.0.10-1.el5.centos Firefox/3.0.10
Kernel: 2.6.18-128.1.10.el5.centos.plus, x86_64.
After upgrade opensuse from 11.2 to 11.3 a cannot use firefox. I start firefox form shell and nothing. When I use strace then firefox stop on "waitpid(-1, ". Firefox work well only when i login as a root. I removed java sun plugin and started firefox in save-mode and check to disable all extensions etc and nothing to do.
View 5 Replies View RelatedI updated to firefox 3.6 from the repository, it works bad, so I come back to 3.5 from the repository, now firefox doesn't start anymore.
Try with click not work
Try by console with
firefox not work
/usr/bin/firefox not work
/usr/lib64/firefox/firefox not work
Also try with -p and -safe-mode not work
Permission of that files are rwxr-xr-x group=root user=root
If I launch it by superuser it works
linux-dvkc:/home/pla/Documenti # firefox
kmozillahelper(19259): Session bus not found
KCrash: Application 'kmozillahelper' crashing...
Warning: connect() failed: : No such file or directory
KCrash cannot reach kdeinit, launching directly.
drkonqi(19265): Session bus not found
*** nss-shared-helper: Shared database disabled (set NSS_USE_SHARED_DB to enable).
linux-dvkc:/home/pla/Documenti #
I am a opensuse 11.3 user with firefox 3.6.8.I use 32 bit version and having trouble with one of my banks applet when launched from the firefox , it shows up as 'start:applet not initiazed' and then just hangs there.I have tried a lot googling and looking around in opensuse forums, but could not get my browser working. If I use How do I test whether Java is working on my computer? , it shows the java version is working. I have tried removing icedtea , but did not help.I have also found , when I install opensuse 11.3 , this applet seemed to have worked fine. BUt, after all the online updates system did , it just stopped working with this applet not iniatilized message.
View 1 Replies View RelatedI am using: Firefox 3.6.14 from buildservice. 3.6.13 from buildservice did work flawlessly. System 11.1 KDE3.5 release 21.13.1
Error message when starting from terminal:
Code:
user@linux-2c5j:~> firefox
Could not find compatible GRE between version 1.9.2.14 and 1.9.2.14. What I have tried: deinstallation of mozilla and reinstall. Does not change anything.
Does anyone knows how to start a gnome-terminal from firefox url? With a protocol or something? Is this possible? Or any other command line.
View 4 Replies View RelatedI just installed openSUSE 11.4 and after the installation of VirtualBox I coudn't start it. The icon at the cursor kept jumping but no response. I tried to run the binary from Konsole and I got the following message:VirtualBox: supR3HardenedVerifyFileInternal: Failed to open "/usr/lib/virtualbox/VMMR0.r0": No such file or directory (2)I checked YaST to see which packages were installed:
python-virtualbox
virtualbox
virtualbox-guest-kmp-desktop
[code]...
Sometimes when I boot openSuse 11.2, it only boots to runlevel 2 (console) I have to log in as root and enter init 5 to make kdm appear. Then I can log in normally, and everything works fine.
View 9 Replies View Relatedi have installed VLC and when i ckuick nothig happens.?
View 1 Replies View RelatedI will open firefox then scroll to file-quit firefox, firefox closes fine but when i want to open firefox again it wont, i have to restrate opensuse 11.4 linux 2.6.37.6-0.7 kde 4.6.0.0.
View 3 Replies View Relateddigikam doesn't start ~/.kde4 has been reset tried to copy ~/.kde4previous/*/*digikam* to .kde4 related paths running from console: riccardo@homeSUSE:~> digikam digikam: symbol lookup error: /usr/lib64/libdigikamcore.so.1: undefined symbol: _ZN6Marble12MarbleWidget11changeEventEP6QEvent
View 9 Replies View RelatedI've recently updated Chromium to version 15.0.854.0-2.1 and it won't start now.When I start it from terminal I get the following error message:
Code:
[9537:9537:1614240504:FATAL:zygote_host_linux.cc(129)] The SUID sandbox helper binary is missing: /usr/lib/chromium/chrome-sandbox Aborting now.
[code]...
I am operating openSUSE 11.2 x86_64 KDE4.3 after installing sensors then adding
Code:
acpi_enforce_resources=no
to my optional kernel parameters and running
[code]....
I have just done a fresh network install on SUSE on a new HP Proliant ML115 server. The install seemed to go OK, but on rebooting after the install I get a shell logon/prompt -- no GUI. Have tried reinstalling with the same result. If I try to run startkde I get a message that says "$DISPLAY is not set or cannot connect to the X server."
How do I resolve this?
I got an opensuse 10.2 on a aged desktop. Once start, it just stops at command line login prompt. I have to login and type 'startx' to get the GUI. Since I haven't used this computer for over half year. I couldn't remember what I did last time. Any tips for this problem?
View 4 Replies View RelatedThis is the output when I run it from the console "can't open file '/usr/lib/exaile/exaile.py opensuse 11.3". I'm using opensuse 11.3.
View 4 Replies View RelatedI have tried, and I think succeeded installing this font. Geneva Font It seems to work and scale fine in AbiWord and and OOwriter, but it does not display in firefox, it is horrible. The above link shows a sample which is really very bad at all levels of zoom. This site (I think this is the same problem) is also terrible, until I zoom to a very large size, when it smooths out. GNF - Gambling Network Forums I have set the firefox smoothing to 0, so it is not that. (browser.display.auto_quality_min_font_size;0) Here are screenies, if your browser shows the pages OK: The last one is magnified in an image editor. But here it is, zoomed with Firefox [ctrl + +], it goes smooth at a certain level of zoom. Here it is magnified:
View 9 Replies View RelatedIt seems that there is no way for me to install java plugin in firefox 3.6. I've already read some threads about similar problems but none of the solutions that worked for other people work for me. So I decided to open a new thread. Following instructions of other threads, I uninstalled all java packages and installed again just the three that you can see below, but nothing changed.
Opensuse 11.1
KDE 4.4.1
Firefox 3.6
Code:
# rpm --query --all '*java*'
java-1_6_0-sun-1.6.0.u7-20.4
java-1_6_0-sun-plugin-1.6.0.u7-20.4
timezone-java-2008h-2.16
When "sudo apt-get upgrade" said packages have been kept back, used "sudo aptitude dist-upgrade."Obtained grub prompt on restart; purged and reinstalled grub using the chroot method. This has become customarily necessary after certain system-wide changes (see my other threads) but I still don't know why. But it's not the main subject of this thread.On restart obtained message saying kernel and fallback failed to load. Restarted and used shift to select 2.6.35-25 (3rd on the list) to load.I inferred that 2.6.35-28 is at fault since the recent upgrade mentioned kernel generic.
View 2 Replies View RelatedI have recently disabled nautilus from showing up on my desktop. Now I can't seem to start nautilus. Starting it from gnome-terminal doesn't display anything, and it never shows, and it never terminates. The way I disabled nautilus from showing up on my desktop was by following Xmonad/Using xmonad in Gnome - HaskellWiki
View 5 Replies View RelatedChromium doesn't start after latest updates(15.0.854.0-2.1)
Distro: openSUSE 11.4 x86_64
chromium, chromium-desktop-kde
Version: 15.0.854.0-2.1
Repo: obs://build.opensuse.org/openSUSE:11.4:Contrib
libv8-3
Version: 3.5.5.0-2.1
[Code]...
My laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction:ATI Installer HOWTO for openSUSE usersafter installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually.i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important.now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.he graphic card is :ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
View 9 Replies View RelatedI just upgraded my home machine to 11.2 but apache is not starting automatically. I tried deleting apache2 in YaST and reinstalling it but it still doesn't start. It doesn't appear as an icon in YaST under network services either. There's a log directory for it but no logs. There's an /etc/apache2 directory.
I haven't tried starting it manually because (a) I don't want to destroy any evidence and (b) I want it to work automatically in future.
Is there something else I should be doing? Or how to diagnose?
My laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction: ATI Installer HOWTO for openSUSE users after installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually. i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important. now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.the graphic card is :
ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
I have a development server that I have attempted the 9.10 -> 10.4 LTS upgrade on to see if there were any problems. (Another catch is that I am running PHP 5.3 and 5.2 concurrently, and this has been successfully done.)
MySQl fails to start:
Quote:
root@dev11:/var/run/mysqld# /etc/init.d/mysql start
* Starting MySQL database server mysqld
...fail!
Checking /var/log/syslog:
[Code]....
P.S. This server has had MySQL running for some time. There are databases on there, but again they are used in development only. I'd rather not uninstall/reinstall.