Chromium doesn't start after latest updates(15.0.854.0-2.1)
Distro: openSUSE 11.4 x86_64
chromium, chromium-desktop-kde
Version: 15.0.854.0-2.1
Repo: obs://build.opensuse.org/openSUSE:11.4:Contrib
libv8-3
Version: 3.5.5.0-2.1
[Code]...
openSuse 11.4 + Gnome 3 (upgraded from oneclick install). A couple of ago I ran zypper update and there were some updates available for chromium (and a few other things). I installed them, did some work in libreoffice (dint use chromium then) and turned the computer off. Today I needed to do some web surfing, so boot up my computer, launch chromium and get the following message (I translated it from spanish as I use the spanish version of opensuse)...
Failed to launch <<Chromium web browser>>
Failure executing child process <<chromium>> (The specified file or folder doesn't exists)
Before the "update" chromium worked perfectly. Now it doesn't even start.
I've recently updated Chromium to version 15.0.854.0-2.1 and it won't start now.When I start it from terminal I get the following error message:
Code:
[9537:9537:1614240504:FATAL:zygote_host_linux.cc(129)] The SUID sandbox helper binary is missing: /usr/lib/chromium/chrome-sandbox Aborting now.
[code]...
opensuse v11.3
linux 2.6.34.4-0.1-desktop x86_64
After the latest round of updates approx Sep 10, sound has stopped working. (I rarely need sound for anything so it took a while to notice.) In Yast :: Hardware :: Sound it lists all of the devices that were previously defined.
- 0: SBx00 Azalia (Intel HDA)
- 1: RS780 Azalia controller
- 2: Logitech USB headset
- 3: USB Audio
Yet when I go to Gnome :: Control Center :: Hardware :: Sound and select the tab Hardware, nothing is listed. I suspect this is why there is no sound. How do I go about reloading the hardware into the hardware listing?
is anyone else experiencing difficulties with the latest chromium daily build? whenever i click to launch it, it appears, then closes 1 second later i know that chromium daily build is obviosly not suppost to be a reliable browser, im just curios to see if anyone else is experiencing difficulties aswell
View 3 Replies View RelatedI installed Chromium via a repo generously maintained by Tom "Spot" Callaway. Since it's his repo I thought I'd contact him, but I don't really know how - so I'm brining my issue to the forum to see if anyone has a possible solution.I've been using Tom's Chromium fine for the past couple months. After a "yum update", Flash no longer works in Chromium. It works in Firefox. If I try to play any Flash videos it's just a blank box.
View 3 Replies View RelatedI have Ubuntu 9.10 I have already installed chromium but its out of date is there anyway I can update to latest version?
View 9 Replies View RelatedI've installed chromium on Linux from a custom binary on the net. When I try to get to gmail or any other site that uses flash, chromium warns me that the version of flash that is shipped with the browser is stale and that I should be using the latest version and pointing to an adobe site.the adobe site gives me 3 options
1) yum
2) RPM
3) tar.gz
4) APT for ubuntu
since I'm on redhat, I can use either yum or RPM.Which one should I use and what is the command to install it so that chromium can use it.
I just install the latest beta chromium by executing these commands:
Code:
The problem is I still want the Stable version of Chromium, and I want the developer version of Chromium not the beta release. So I got 2 problems: I need to downgrade this Chromium to the Stable release and then I want to install the developer release of Chromium and not lose this Stable release. I'm currently running 11.04 Ubuntu..
After update to latest phonon (4.4.0-37) - with kde 4.4.1., it doesn't recognize pulseaudio anymore. I am using xine backend, but I can't find 'PulseAudio Server' device entry in phonon configuration
Is there special pulseaudio configuration so phonon will regonize it? code...
I have installed chromium using this: [URL] -- spots repo. I have signed up to the trial for html5 here: [URL] and it says I am in the trial. However I am still unable to play a number of ..... videos not understanding exactly how I would receive the updates to enable html5 I thought I would wait a few days and see what happens but alas after a week nothing has happened.
View 5 Replies View RelatedInstalled version are:openSuse 11.2KDE 4.4.4After installing some upates does my firefox will not starts anymore. And I have no idea why. It's seems not really a problem with firefox itself, because some other programs can't be started as well. Such as eclipse or Googles ChromeIt's appears only for few secounds the program in the task bar, and disappears then. Is there some log file or something like this, there I could see what happens in the start procedure of the firefox program
View 3 Replies View RelatedNot sure but has support and updates for 11.2 come to an end? Every monday morning i make sure i'm upto date with updates etc. This am i get a message saying "repo not available" and having looked online to see if the directory openSUSE_11.2 exists, it doesn't.
At the same time loged in as a std user i regularily offer the command kdesu kwite. the command is accepted without error and the cursur returns on a new line as expected but kwrite doesn't start. I'm guessing that my last update has left me with a broken OS. It doesn't seem very long at all since i installed 11.2!
I have an MSI U100 Winbook with Ubuntu Workstation 10.04 LTS newly installed (about 4 days ago).
The update manager displayed about 15 or so updates for my 10.04 installation which I installed. Upon reboot, I can not successfully login to the desktop. It will take my username/password, the screen will go black for a couple of seconds, then the error sound, and back to the login dialogue.
A tail on /var/log/messages displays:
atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0)
atkbd.c: Use 'setkeycodes e077 <keycode>; to make it known.
composit sync not supported
These messages keep repeating. I am able to login at the console just fine. I have enabled root login but get the same issues logging in as root. I have googled and found several articles and postings involving these messages but they are all in reference to upgrading from 9.x to 10.04. I did not upgrade and did not experience the freezing of applications as noted in those posts.
I've got a problem when i try apt-get update I get the following in the report:
Failed to fetch http://ftp.uk.debian.org/debian/dist...86/Packages.gz 404 Not Found
Failed to fetch http://ftp.uk.debian.org/debian/dist...rce/Sources.gz 404 Not Found
R
Network is OK, what is going wrong?
1. Which XFCE on install. dvd Fedora 12? 4.4, 4.6?
2. Can I download installation dvd with latest updates?
3. Is it possible to see content of installation dvd Fedora 12?
Consider the following scenario: you have two disks that are kept synchronized by some method. Could be RAID, could be LVM snapshots, could be a script. However, something has gone wrong. The disks are out-of-sync and you don't know which disk received which updates. You want to manually re-sync the disks but how do you figure-out which file to copy where?
I'm thinking of saving recursive directory-listings of the entire disks to text-files. Sorting them on last-update and removing all identical entries from the files.
I have a feeling that this is something that can be done with just a few command's but I need some help to get me started.
After applying the 31st Jan and 1st Feb updates to -current (32 bit), alt-tab to switch between windows is no longer working in kde. It seems to lock the desktop and then after a few seconds kde goes back to the login screen. If I disable all desktop effects then alt-tab works again.
View 10 Replies View RelatedHas anyone else had the "LastPass" password extension stop working on the latest Chromium builds?
View 2 Replies View Relatedhow to check what my latest installed drivers are and how to install the latest? If I search for Nvidia in YaST then noting comes up. I beleive the latest drivers from Nvidia are 195.xxx
View 7 Replies View RelatedSo, it's 2010 and I already though I got rid of coding my own drivers & compiling my own kernel in normal use... After installing latest Fedora 14 updates, my system won't boot anymore into fedora. Just continuous loop no matter if I select previous kernel system won't boot.
Anyone any ideas? I think it might be ATI driver but not 100% sure since I didn't see any D/A related or Kernel updates wasn't upcoming...
Anyways I will figure out this sooner or later but this kind of updates sucks a bit that your system goes suddenly totally unuseable or system won't reboot, sooo , time to move on with an another distro or is Fedora just RedHat's playaground?
A first for me with Ubuntu. The system has hung. Well almost hung.
After installing the latest automatic updates - I'm sorry, I don't know how to identify which ones they were, but it was on 29 January 2010 - when selecting almost any application the system almost hangs. By almost hangs, I mean, the cursor will move very slightly once every 10 seconds or so, but even if it can be manipulated to a certain point, no action can be taken.
The only way out of this situation that I have been able to find is a hard reboot. (I was used to this type of thing with Windows XP, but had never seen it before with Ubuntu).
Reverting to Ubuntu Linux 2.6.31-17-genereic-PAE at the GRUB boot up option screen solves the problem.
Any suggestions on what might be happening, how to fix it, or if it is even worth bothering with? It is working just fine (so far) on the older generic-PAE.
Ubuntu has been great and it is a great Linux distro. Unfortunately, the update of 9.10 desktop edition to release 10.4 failed on a couple of fronts.
1) Xserver is no longer working;
2) An upgrade of grub-pc causes an exception.
The system ran perfectly before the update was performed. The update resulted in Attempting to install GRUB to a partition instead of MBR. This is a BAD idea. usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and is use is discouraged.
Based on information found at [URL]... an attempt was made to execute the following command. sudo aptitude dist-upgrade But that resulted in E: dpkg was interrupted, you must manually run sudo dpkg configure ato correct the problem The later launches an upgrade of grub-pc. This routine requests the selection of which devices are to be used to store grub-install. When that was done ... GRUB failed to install to the followed devices: /dev/sdb1 /dev/sdc1 /dev/sdd4
Do you want to continue anyway? If you do, your computer may not start up properly. GRUB installation failed. Continue? Questions:
1) Can / should the upgrade of grub-pc be bypassed in order to get the system running?
2) If not, what values should be selected when selecting the devices to store grub-install?
3)Because the computer is a RAID configuration, would someone advise are there special considerations which should be considered?
4) Once grub-pc is resolved or bypassed, should the commands found in the aforementioned article be used to repair xserver.
5) Are there additional measures which will be needed to in order to complete the update to release 10.4?
Here are some helpful details on the system configuration
The computer has four disk drives using RAID 1 and RAID 5.In the following configuration RAID5 Device #0 750.2 GB Sotfware RAID device
#1 750.2 GB ext4
SCSI1 (0,0,0) (sda) 320.1 GB ATA WDC WD3200AAKS-2
#4 primary 250.1 GB K raid
#3 primary 16.0 GB F swap
[Code]...
I had sound before but after one of the latest updates the sound quit working. I read other threads and they suggested to type. Code: alsamixer on terminal. I did that and unmute everything and pumped each setting to the highest possible. When I boot the laptop again everything is muted, How can I save settings or what other solutions are there for this problem.
View 1 Replies View RelatedWe are running CentOS 5.4 x86 on ESX 4 Server. We have a busy Help Desk, a Forum and several name-based websites running. Weve been using CentOS for this 'purpose for several years (different versions) and so far we have never had a problem. On Saturday, I applied all the latest updates including the Kernel updates. I rebooted the server and all seemed well until Sunday morning when I didn't get my Logwatch in the mail. Then I got a telephone call from a customer asking me why I hadn't responded to a Trouble Ticket he had created on Saturday afternoon (creating a TT sends an email via sendmail to all the support staff). I did a few tests and sendmail has just stopped working. The Logwatch had been created and had been sent to root, but all mail for root is redirected to my Mail Server on e different box (GroupWise). There was nothing wrong with the mail server, but sendmail has just stopped.
Fortunately I had created a snapshot before I applied the updates, so I reverted back to the snapshot and mail started working again, but I lost 2 days info because I had run the backup before I applied the patches. Now I see there are 132 Updates available, but there is obviously a problem somewhere in there!
I ran the latest updates this week (including the new kernel and the new kmod-nvidia update) and I got a blank screen when I rebooted. (I get the Fedora bar across the bottom of the screen, then after that the screen goes blank) I assume this is when the xorg server is trying to start..
I went into single user mode , backed up and then removed the xorg.conf file but still got a blank screen upon reboot.
I rebooted into single user mode, copied the /var/log/Xorg.0.log file to a safe location, and then restored the system back to its original state.
I've since rsync'd my system back to where it was before the update.
Here's my Xorg.0.log file:
I've posted this to the fedora mailing list with no response, my apologies if it's been addressed here...
I have an IBM Thinkpad with an Nvidia card ( nVidia Corporation GT218 [NVS 3100M] (rev a2) )
I currently have the nouveau driver black listed in my grub.conf setup: rhgb quiet nouveau.modeset=0 rdblacklist=nouveau
I did the update which installed/updated the following:
---> Package kernel.i686 0:2.6.35.14-95.fc14 set to be installed
---> Package kernel-devel.i686 0:2.6.35.14-95.fc14 set to be installed
---> Package kernel-headers.i686 0:2.6.35.14-95.fc14 set to be updated
---> Package kmod-nvidia.i686 1:280.13-2.fc14 set to be updated
However when I reboot the system boots to a blank screen, and even the previous kernel boots to a blank screen. I tried installing akmod-nvidia but get the same results
I've restored the system back to before the update for now..
On my iSCSI booted server, the standard Karmic Server install CD installs a system that won't boot.This is caused by a bug in the initscripts. This bug is solved in an update of this package. How do I get the updated version of the initscripts package on my install CD?
View 1 Replies View RelatedI have Alienvault (which is debian based) running on an offline network. I need to have a repo server on that network in order to provide updates/other installation sources. Currently I have configured Ubuntu Server 10.04 as an apt-mirror on an internet-connected network.
What I need to do is find a way to automatically take the newest updates, and export them to disk. I need to mirror the internet-connected-repo server on the offline-network side. But I don't want to burn all 40 gigs or so every time new updates come out. Basically, I'd like to perform incremental backups of the mirror after the first full backup. Is it possible to automate this daily?
[Code]...
I've been running Maverick 64bit fine on my Dell M1330 laptop until a couple of days ago. After the latest updates (I guess to kernel 2.6.35-24-generic), sound stopped working properly. The sound indicator applet tells me that the sound system is not responding. The login sound doesn't play anymore.
On the other hand Rhythmbox plays and I can hear the music. I can adjust Rhythmbox volume but not the global volume (as neither the sound indicator applet nor the multimedia volume keys on my laptop work).
Code:
$alsamixer
it works flawless. Here is what I get if I try to run pulseaudio from the terminal
Code:
$ pulseaudio
E: module-ladspa-sink.c: Master sink not found
E: module.c: Failed to load module "module-ladspa-sink" (argument: "sink_name=ladspa_output.mbeq_1197.mbeq
[Code]...