I just installed squeeze on a raid 1 set of partitions via netinst. gde works fine. I have installed kdm and all of its dependencies (I believe), but when I select it and log in, I see the kde startup screen for a moment, then it goes blank, and goes back to the login screen. My /var/log/kdm.log is:
[Code]....
After upgrading to squeeze I have now X Server 1.7.7 installed and it won't start.
When I try to run startx script, monitor gets blank for few seconds and then I get back to command prompt and no errors is displayed.
When I try the same as root, system locks up with blank screen and no functioning keyboard.
Initially I had kernel 2.6.28 which worked fine with earlier Lenny's X Server and Matrox P650 AGP video card. After upgrade I found, that Matrox P650 is not longer supported in new xorg and I swapped it to Matrox G550 AGP card.
Tried mga driver's many options, upgraded to kernel 2.6.37.2, tried with Matrox G200 PCI and Savage 4 Pro AGP card but without a success.
With kernel AGP support turned on I got both with Matrox G550 and Savage card an MTRR error: "error setting MTRR, Invalid argument (22)". Without AGP support in kernel, Matrox G550 gets initialised as PCI card and no errors and X still not working. Same with Matrox G200 PCI card.
With vesa driver the behavior is also the same and output at the end of Xorg.log file is almost the same.
So I understand, that this is some X server problem?
Nothing special in xorg.conf file and tried without it also.
End of the Xorg.0.log file:
>>
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
[Code].....
I've installed Lenny with no problem, but I tried switching to Squeeze, and grub for some reason didn't pick up on the Windows partition this time - it just shows the two Linux options (debian and debian single-user). I check the menu.lst file (which I've edited under Lenny with no issues), but for some reason it doesn't exist at all in this install. Is it in a different location with Squeeze maybe?
why grub didn't pick up on my Windows install?
have the following issues with kde: when I try to login it shows a blackscreen with black cross-shaped pointer for a moment and then again login box appears. When I execute startx from tty kde loading freezes at splashscreen: I see all icons in a row but the last one (KDE button) is blurred.I have debian wheezy/sid, kernel 2.6.37.2, xserver-xorg 7.6+7, xserver-xorg-core 1.10.3-1, nvidia driver version 275.21.Here are logs.
kdm.log:
X.Org X Server 1.10.3
Release Date: 2011-07-08
[code].....
I have avi, mpeg etc files associated with SMplayer. When I double click a file SMplayer DOES lunch but it never starts the playback. Not even the play key is active, and the seek bar and volume bar are frozen. If I go Open-->File and chose a file, everything works great.
View 14 Replies View RelatedI'm a Linux User since 2007. Later, i was an Ubuntu Fanatic User. But my computer is old, and Ubuntu is more slow in every version.
I'm from Valencian Contry, and I speak "Valencian" or "Catalan"
How I install XMMS on Debian Squeeze???
when and how we're going to be able to install Gnome 3 on Debian 6.0 Squeeze?
View 4 Replies View RelatedI want to install VGA driver on debian squeeze. my VGA is "Intel Corporation 82G33/G31 Express Integrated Graphics Controller".I do not know which driver I must install for this VGA.Does Linux recognize related driver ?
View 3 Replies View RelatedIn a kde terminal, apt-get was installing gem when it asked me to restart the kmn daemon (i'm not sure about the "kmn"...) and i hit "yes" when the gui dissapeared and fell back to tty1. I waited a while and then restarted the system but kde didn't start automatically (it used to be so). I tried "startx" and "startkde" but they are unknown.
I don't know linux this deep so i don't know what to check or how to trace down this problem.
I have it installed and running nicely so I am following sqlpython's "How To: Full multimedia in Squeeze" to get my various players playing. sqlpython seems to have been running a KDE environment while I am running Gnome, but that should not make a critical difference.
If I do (as root) apt-get install libdvdcss apt does not find it. Same result for libdvdcss2.
BTW, which of these would be more appropriate for my 64-bit squeeze?
etc/apt/sources.list shows:
#
# deb cdrom:[Debian GNU/Linux testing _Squeeze_ - Official Snapshot amd64 NETINST Binary-1 20100217-22:04]/ squeeze main
[Code].....
A very quick and straightforward install of Dropbox on Squeeze kde 4..4 without Nautilus dependencies. It worked perfectly for me.
View 1 Replies View RelatedIt seems that I'm learning a bit about Debian in the last couple of days...
Here's the thing. I don't appear to be getting any 3D accelaration from my video card at the moment.
Having tried many things (which all failed) and making a mess of my computer I have done the following things:
1. Reinstalled Lenny from scratch.
2. Updated sources to point to stable and allowed update manager to do its thing.
I now appear to have a working build of squeeze.
X is up and running fine, but when I check /var/log/xorg it appears that I'm running the NOUVEAU driver, which does not support the 3D functionality of the card.
So... What is the best method for getting the appropriate driver installed?
My last attempt ended up with nvidia-glx fighting with xorg, so I'm hoping that someone will have up to date instructions that I can follow...
I just got done installing Debian Squeeze on a system..Everything seems to work where audio is concerned, except for audacious.I can get streaming music from vlc/totem as well as play music files (mp3, ogg, flac, ect.).I was wondering if anyone else experiences this problem..It should be noted that I have the Debian multimedia repository enabled as well.When running audacious from terminal and trying to open up an mp3 file I get this message:"madplug: open_audio failed: XMMS reverse compatibility output plugin."
View 5 Replies View RelatedMy problem is that I am trying to install nvidia drivers I got integrated card nvidia geforce 6100 nforce and amd x2x64 processor and also squeeze x64, so I downloaded the driver but when I try to top gnome I cant
/etc/init.d/gdm stop it says no such file or directory
So I google it and I found that squeeze has genome 3 so I put:
/etc/init.d/gdm3 stop
and it just appears a black screen just with a prompt but without any shell, I cant sign in debian or do anything it is just a black screen and i try ctrl+alt+f1, f12, f8, space and nothing, I can write but it doesn't response the only thing that I can do is press ctrl+alt+dell and it restart the PC. How can I stop gnome to install my drivers?
1 - Make a clean install of Squeeze.
2- Upgrade to sid
3- Run this command after installing xserver:
aptitude install kdm kde-10n-es kdebase
Then aptitude installs kdm, kdebase... and brasero, metacity, gvfs, gnome-control-center, evolution... (¿?) I only want to install KDE, why aptitude also install all this gnome crap ? And I say crap because I only want to install the KDE desktop, I use Gnome in my laptop =/ If you uncheck install recommends in aptitude you can make a clean KDE install.
I just upgraded one of my non-mission-critical servers to squeeze just to see how it would go. Since the upgrade NFS is broken. When I try to start it I get:
Starting NFS kernel daemon: nfsdrpc.nfsd: unable to resolve ANYADDR:nfs to inet address: Servname not supported for ai_socktype
rpc.nfsd: unable to set any sockets for nfsd failed!
I've tried searching on those errors, but all I've found is that this has happened to others when no network interfaces are started; this is clearly not the case with this server, since other services are running and working on both interfaces.
So, in all distributions that I test, I did not get working the Plymouth, if I try to fix, the system broke. Only me rest open the System with recovery mode and execute "chroot" and remove the changes.
I was following that tutorial >> [URL] ....
And everything goes normally, with no errors, but when I reboot the system, GDM not start, leaving me with a black screen with the processes that system start. So how i cant fix that?
My hardware is >> Core 2 Duo 8400, GT 740 GDDR5 and 2 Hd of 500GB.
I am new to Debian (and Linux). I just finish to install minidlna to feed my TV with my Debian Jessie PC but I cannot make minidlna to start. I installed minidlna using synaptic. No error shown. I went to the config file to fill the parameters needed.
I started minidlna using the command line /etc/init.d/minidlna start and got the following each time :
XYZ@bureau:~$ sudo /etc/init.d/minidlna start
[sudo] password for XYZ:
[ ok ] Starting minidlna (via systemctl): minidlna.service.
XYZ@bureau:~$ cd /var/cache/minidlna
XYZ@bureau:/var/cache/minidlna$ sudo systemctl status minidlna -l
[Code] .....
I just upgraded to Debian 6.0 squeeze 32 bit XFCE from Ubuntu on my old Dell PC. Installation went well, however, i can't get into X windows after reboot, the screen just displays garbage
Specs:
Dell dimension 600Mhz/384M RAM/10G HDD
ATI RAGE pro 128
Any pointers on what should I do?
After using testing (now Wheezy) for almost a year and breaking my machine (latest nvidia broken packages), I went back to vanilla Squeeze (after updates, now at 6.02).Nothing from outside the stable repos; not even the nvidia driver (kept it at default and nouveau)Repo "deb http://www.debian-multimedia.org stable main non-free" enabled.It seems flash is not working with iceweasel; I either have a message which says "Cannot play media: you do not have the correct version of the flash player. Download the correct version," with a link to Adobe's site, of media appears in broken pieces.In order to keep my system "clean," I haven't downloaded anything from Adobe, and a search on this forum suggested installing flashplugin-nonfree or flashplayer-mozilla. Did both (can't have them at the same time), restarted, no joy.
~$ apt-cache policy flashplayer-mozilla
flashplayer-mozilla:
Installed: 2:10.3.181.26-0.1
[code]...
Using coolbits allows for me to try to change it but it refuses to accept it, and even when i run it as root it still just acts like nothing has changed. It's not my laptop maker since i can overclock my gpu using rivatuner on windows so it's clearly not them trying to restrict me. I was attempting to restore teh clocks back to what the factory settings were from nvidia and not the underclocked settings that the oem put on it for the 3d settings and then reducing the 2d by ~10% to help it run cooler except when gaming.Has anyone been able to successfully use coolbits in squeeze? Or is there another nvidia overclockign tool out there besides nvclock since my gpu is apparently too new to work with it and i'm not going to risk it.
View 2 Replies View RelatedMy net-book is working properly with Debian squeeze 2-6-32-5-686, only the wlan does not work. After typing lsusb I have got the message: lsusb : Bus 002 Device 002 : ID 160a:3184 VIA Technologies, Inc. VIA VNT-6656 [WiFi 802.11b/g USB Dongle]
So I obtained the driver package : VT6656_Linux_src_v1.19_12_x86. I followed the instructions ( make install... ) - but the result is only a lot of error messages. Mayby I am using the wrong driver package for the squeeze kernel - I don't know.
i got a copy of CD1 from [URL]. And then, i noticed there was no gdm(X server) installed. Is it different from Lenny? It is possible to install X from the CD?
View 5 Replies View RelatedHere is my xorg.conf when I attempt to use fglrx:
Section "Device"
Identifier "ATI RADEON HD4850"
# Driver "ati"
Driver "fglrx"
EndSection
Also, doing /etc/init.d/start/ gdm3 says Starting GNOME display manager: gdm3 but it doesn't do anything. I tried pressing ctrl+f1 all the way to ctrl+f12 and nothing. What does work however is sudo gdm3 (with the "ati"/"radeon" driver --- nothing works at all with fglrx).
I am trying to get fglrx working because I want to fix this compiz issue I've been having here which could be related to the shortcomings of the "ati"/"radeon" driver: viewtopic.php?f=10&t=40991&p=312577#p312577
A few days ago I ditched the user friendly world of Ubuntu and installed Debian Squeeze amd64 (testing) over it. I did not install the suggested Gnome 'X desktop' in favour of booting to the terminal and starting X once logged in as a user.
Everything was fine except for the fact Xvesa was used instead of Xorg as the system did not have the required Fglrx driver. I'm using an Acer ASPIRE 5536 with an ATI Radeon HD 3200 Graphics stuffed in it, which certainly beats intel GMA.
Unfortunately the drivers for it are proprietary.
On Ubuntu this was automatically detected and I was asked if I wanted to sell my soul and enable the restricted drivers. On debian however I have to download a shell-script of the ATI website to install the fglrx module.
Following this guide I downloaded the correct file (Under motherboard/something) and ran it as root.
I couldn't run it with any --buildpky Debian/XXX option, they all failed.
Code:
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Generating package: Debian/testing
cp: cannot stat `/root/fglrx-install.tCX8nC/x710_64a/*': No such file or directory
Package build failed!
[Code].....
I have installed the Squeeze testing version. i have setup networking for static in the /etc/network/interfaces file. tried to find resolv.conf in the /etc/ since could not find i created this file post trying to start the eth1 i am able to ping my ip, but if try to ping the gateway i get an error saying the ping is not sucessfull. I have 2 network cards, eth0 and eth1. as eth0 does not work i have configured eth1. The dump of the interfaces file is below
[code]...
The same setup works fine in Ubuntu 10.10 setup that i have.
I have Debian Squeeze x64 on ThinkPad T61p with standard 2.6.32-5-amd64 kernel. thinkpad_acpi loaded as module, suspend to RAM works fine from menu in KDE as well as by closing the lid, however machine doesn't appear to react on pressing Fn+F4 which should put it to sleep as well. I've read through thinkpad_acpi documentation and asked Google but so far can't find the solution. Can anyone, point me in correct direction?
View 6 Replies View Relatedaccording to [URL]... glx server only supported in 2.6-32-21-generic. so to get 3d rendering support i need to compile a that kernel version in squeeze or install from sid/experimental?
View 6 Replies View Relatedhow to fix the detection of ps2 mouse under Debian Squeeze? It is the optical mouse with wheel, red light shines, but mouse doesn't work.
View 14 Replies View RelatedI have installed squeeze and kernel 2.6.32-3 Also I use the USB webcam Asus. A week ago I installed lenny, my webcam didn't work, then I made upgrade to squeeze and my webcam worked! I don't know why Yesterday I have installed the system again, the base system as lenny (net-install) and then squeeze. But webcam doesn't work
[Code]...