OpenSUSE Install :: VGA Mode Is Changing During Boot?
Dec 14, 2010
my linux pc is connected to a lcd monitor with native resolution 1280x1024.The font at the textconsoles is too small for me.
I changed the entry "vga=..."in the file /boot/grub/menu.lst to "vga=0x0314".During the first few seconds the screen-resolution matches the setting of the vga-mode, but after then the vga-mode automatically switches to 1280x1024 (only at the textconsoles).The x-server is configured to 800x600 which is the resolution I want.I also tried vga=normal and vga=788. In older suse-version 10 and lower never had this problem.
View 7 Replies
ADVERTISEMENT
Mar 30, 2010
I have following problem. I have HDD with SUSE with boot partition. I want to add another HDD with LVM move system there switch boot and format the first disk and add it to LVM. I tried to figure out how to configure GRUB (with yast2 bootloader) to boot from MBR and read kernel from LVM, but without any luck. It still boots from firts disk's boot partition.
View 1 Replies
View Related
Jan 4, 2010
I have openSuse 11.2 along with Windows, I get an option on boot to choose between the two OS, but the default is suse. How can I change the default load to Windows
View 1 Replies
View Related
Mar 10, 2011
Just a little disappointed. I downloaded the 11.4 Gnome by about midnight, checked the CD for integrity,and started the Live CD, and it worked quite well. Installed it, but troubles started. OpenSuse 11.4 won't boot up in the normal mode, but would boot up in the safe mode only. I am now writing from the safe mode, but would like to boot up normally. It get stuck after the first verbose page. And not a move from there. The laptop is Lenovo T400, Core2Duo with 4GB RAM, screen 1440x900. No problem with any other distros up to now.
View 9 Replies
View Related
May 19, 2010
I have 11.1 installed on an old G3 system. The PowerPC config has worked well, but after an update I get a black screen at GDM. I think all is well, but the resolution/refresh rate is set too high.How can I get in to change to runlevel, access SAX2 or change the GDM/Gnome resolution settings?I think I've been able to blindly login
View 3 Replies
View Related
Aug 8, 2010
I started having this issue two days after installing openSUSE. When I try to boot it on battery (that is, without a energy plug) the laptop just turn off right at the beginning. I have other OS's installed and they are working properly and booting when in battery mode. I haven't got a clue of what I need to check to fix this, can anyone help me out? My laptop is a vostro V13.
View 2 Replies
View Related
Oct 27, 2010
Running Suse 10.3, desktop box, Asus M2NPV-VM, Athlon 64 3800+, two HDD RAID 1 config. I was getting 'bad block' errors when logging into Root, ran a search for fsck to try and fix the problem. Found out not a good idea to run while the system is mounted, tried to boot from install DVD, could not boot to a command prompt, tried to open the Repair tool, got a 'repair failed' message. Rebooted again to the HDD, but now it hangs, tried to go to Failsafe mode, same thing.
Was able to boot to Recovery mode, but not sure where to go from here. I also noted when booting to the HDD in 'verbose' mode it was showing a lot of 'irrecoverable error's on the boot logs concerning the HDD.
View 9 Replies
View Related
Jan 24, 2010
I am testing some boot splash screens but the ones I like most are darker and therefore the black font color during boot, well, shows on dark grey or black background, so I can't see.
I would like to change the font color of the messages, but not the results (green=DONE, red=FAILED, etc., I don't want to change that, only the messages like "doing fast boot", "Loading CPUfreq", and all the ones loading stuff, mounting, etc.).
Apparently I need to edit /lib/lsb/init-functions?
I found a few examples on google, mostly for debian based and the ones I have seen are far more complex than the very simple one opensuse uses. So I am stuck here. 11.2 version.
View 5 Replies
View Related
Jan 15, 2011
I've installed fglrx drivers with 1click install on openSuse11.3. If I try to boot in "normal mode" I end up in black screen. However if I boot in safe mode, then login and startx, everything works ok
Code:
~> fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon HD 4300 Series
OpenGL version string: 3.3.10151 Compatibility Profile Context
Shows fglrx works OK, as well as overall performance is pretty good.
I've done
Code:
aticonfig --initial
radeon drivers is also blacklisted
but running (if it means something)
Code:
# depmod -a; lsmod | grep radeon
radeon 868858 0
ttm 64561 1 radeon
drm_kms_helper 32944 1 radeon
drm 221516 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 6728 1 radeon
View 4 Replies
View Related
May 2, 2011
I've got this really huge problem, which I really want to solve, because otherwise I might even switch back to ubuntu. So here we go. Yesterday, I had a problem with mounting nfts hard drives and solved (you guys solved it actually) it by adding ntfs to the /etc/filesystems file. (I doubt, that it has anything to with that, but it might, so I will just tell you everything I did) I added an ATI driver repository as well, which is probably the key to this problem.(or at least something with drivers) --> not sure if I installed anything
So however, the problem is now, that the screen tells me, the signal would die just before the log in screen appears. ("No signal" --> screen goes to standby --> can't wake it up again--> no opensuse for me) I'm now running the system in some sort of safe mode and it works, but I think, that it is using my on board graphic card and not the actual "radeon hd 5600", which provides much better quality. just looked it up, yes it is using the crappy one (on board) So here's the question: First of all why does this error occur(worked fine before) and secondly how can I fix it?
View 9 Replies
View Related
Feb 18, 2009
Is there a way to change the default to Detailed List View?
View 2 Replies
View Related
Mar 25, 2011
i changed the boot up resolution in the boot up loader to 1366*768 (native res of my monitor) the boot option is still set to quiet splash however, instead of showing the progress bar, it would now always display the complete boot up log ( the list of starting services and such) i then manually changed the boot option from to 1024*768 at boot loader screen, and teh splash would show up, but then on next boot up if i stick with 1366*768, it doesnt work again
View 4 Replies
View Related
Jan 18, 2010
i am not able to start gnome desktop though most gnome applications work in icewm and xfce4 newly installed. the system config edit button i cannot understand what keys where to edit? how do we reinstall gnome fully? by the way my system is
intel 845 mother board[gigabyte]
LG Studioworks 520Si monitor.
250 80 Gb disks
512mb mem
LG dvd writer
View 9 Replies
View Related
Jul 29, 2010
I burned the live version of OpenSUSE 11.3 (Gnome, 32bit) to a CD to test the compatibility of an HP Pavilion p6510f. Although Xubuntu 10.4 booted up fine, OpenSUSE did not. A message about RAID would appear (too briefly to read) and then the computer would reboot.I checked in the BIOS and found that the SATA drive has 3 modes: IDE, RAID and AHCI. The hard drive was set to RAID.
When I changed the hard drive mode to IDE, I was able to run the OpenSUSE live CD; but the change ruined my Windows installation. Windows doesn't boot under IDE or RAID mode. (I have reset the mode to RAID and am restoring the Windows installation.) Is there an option/argument that I can pass to the kernel so that OpenSUSE will work under RAID mode? (Since Xubuntu 10.4 was able to do it, I'm assuming OpenSUSE should be able to.)
View 9 Replies
View Related
Jul 6, 2010
A little while ago i bought a magazine with the openSUSE 11.1 distro on it but couldn't install it so i gave up. I am attempting to have another go. The problem is that the os will work fine when booted from CD in fail safe mode and can be installed from there but when out of fail safe mode the system begins to boot but freezes and will do nothing more.
View 9 Replies
View Related
Jan 2, 2010
I played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
View 6 Replies
View Related
Jul 2, 2010
I may be in the wrong section here (hardware) but I do believe this is a hardware issue. If indeed it is not, I welcome any admins to move this post to the correct section. That said, here's the issue:After years of frustration and problems with Windows XP, my parents finally asked me to install a Linux distro onto their machine. Taking their needs and lack of experience outside Windows in mind, I suggested Ubuntu and Linux Mint to them (as I do to pretty much anyone who wants an easy and beginner-friendly distro). Running first Mint's live session and then Ubuntu's on my own machine to give them an idea of how their new desktop would look, they picked Ubuntu and I grabbed the disk, my external hard drive, and proceeded to back up all their pics, music, docs, etc onto the external.
Once finished, I popped Ubuntu (10.04 LTS) into their machine for a reboot. Realizing when the Windows XP logo came up that the boot order is set to boot from the hard drive first, I went into BIOS and changed the boot order to check the appropriate DVD drive first (they have two DVD drives, both can and have burned onto DVDs without issue), and then the hard drive. Saving my changes and exiting, I did another reboot.I got as far as the splash screen where the dots under the Ubuntu logo lit up as normal, and then after a bit of a wait on my part, suddenly exits to a screen with a prompt telling me a boot device could not be found. Trying again with Linux Mint proved similar.Next I tried simply letting it boot into Windows as normal where I could then use Wubi to install Ubuntu beside Windows but again, the screen got as far as the Windows logo with the blue "loading bar" underneath and then would simply reboot. Having to focus my attention elsewhere for a couple minutes I found out upon return that the system was stuck in an endless loop of rebooting, asking to select between a safe mode, normal boot and last known configuration for Windows, then to the logo and starting over again.I went back into the BIOS and returned the settings to booting from the hard drive first as before (nothing else had been changed), and attempted another reboot. Same loop.I had made a boot "stick" for Ubuntu some time ago, and I've used it once when installing Ubuntu on a friend's laptop which had a broken CD drive. After it wouldn't boot from the USB device I looked in BIOS and selected "look for other devices to boot from" as there was not option to boot from USB in the standard option list (just hard drive, DC/DVD, and disabled). Still no luck.
Calling up my self-proclaimed computer expert uncle, he assured me that returning the BIOS to its default settings would allow it to boot normally back into Windows, probably after performing a disk check.Taking his advice I returned the BIOS to its default settings and reboot. No change, same loop! Frustrated I called him up again, and he said he'd have a look at it when he next gets a chance. heh. That may not be for a while as he is known for taking on projects he can't (or won't) finish.Anyway, tired and now uncertain, I thought perhaps it's something to do with a live disk. I tried an openSUSE installation disk and ended up with "please insert disk 1 into drive" prompt after selecting "install" from the first menu on the disk.
View 13 Replies
View Related
Aug 16, 2010
Today I found out how to change theme in OpenSuse 11.3 64 bit. I'm running KDE 4.4. Naturally I went to KDE-Look.org and trawled it through for eye-candy. I got this HAL-9000 boot splash: HAL-9000 KDE-Look.org
Its a .gz file and uncompressed its called .xpm, I think its just an image, that I should put somewhere, but I don't know where. I tried the bootloader settings through yast, though it didn't tell me anything.
Secondly I got a screensaver, which I'm supposed to compile and install: KCometen4 KDE-Look.org
I tried following these instructions, as best as I could:
Code:
KCometen4 also comes with a simple configure script that should work for a generic local install. If it doesn't suit your needs, you will need to edit the cmake settings by hand.
Quick installation steps:
Cmake's equivalent to 'make distclean' is 'rm -rf build'.
If you do a local installation, you might not see KCometen4 in the Screen Saver Settings module. In that case, you will need to do one of two things.
First, you can set the $KDEDIRS environment variable in your X session startup script so it includes your local installation prefix:
Or second, you can set this for all users by adding your local installation prefix to /etc/kde4rc:
After that, you may need to manually refresh the system configuration cache by running 'kbuildsycoca4'. KCometen4 should now appear in Screen Saver Settings.
So I installed kdebase-workspace-devel but I couldn't find libqt-opengl-dev, but it didn't seem to be a problem, according to the console output:
Code:
It mentions some Q_WS_WIN, Q_WS_QWS and Q_WS_MAC, that it doesn't find. Could that be the problem.
I tried to see if the new screensaver got into the screensaver menu, it didn't.
View 4 Replies
View Related
Nov 12, 2010
how do I install for dual boot mode, what exactly does that mean ( can I boot in either windows or linux then?), how do I do it, and How hard is it to unistall if i would like later on?
View 8 Replies
View Related
Feb 27, 2011
I have 11.3 32 bit running on a machine capable of 64 bit function.With 11.4 coming up, I would like to install the 64 bit version but keep my settings, documents, installed programmes etc.
View 4 Replies
View Related
Jan 22, 2010
on Suse linux 11.2 while trying to install sun webserver 7 I was unable to install it in graphical mode, is the any package that needs to be installed in order to do that
View 6 Replies
View Related
Apr 23, 2010
how do I make grub boot to allow me to choose, like safe mode and normal mode and all that second, how do I do automated back ups (preferably using file copy) for something like every sunday at 11:00 am using the command line, i use to know but forgot.
View 1 Replies
View Related
Nov 18, 2010
I attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies
View Related
Apr 25, 2010
So I have been messing around with the new 10.04 and I managed to screw it up. When I started to log off, I closed the lid to my laptop so it would hibernate, but instead the screen went black and I could only see the cursor. It stayed like that for several minutes so I shut it down manually. When I booted it up again, it froze on the splash/loading screen and I haven't been able to boot it since. I've tried to boot in recovery mode, but I think my campus internet interferes with the downloading of the necessary files from the internet. Is there any way to boot a recovery mode from the install disc? Or am I SOL?
View 6 Replies
View Related
Jan 19, 2011
At 2:20AM /dev/null's permissions are changing to a restrictive setting that allows root access but not normal user access.
I am not seeing anything obvious in cron or /etc/permissions* or /etc/udev. And
# udevadm info --path=/dev/null
device path not found
View 8 Replies
View Related
Mar 20, 2011
to change the login theme. I go to 'Configure Desktop' then 'Login Screen' and change it but when i log out it is still the default screen. Even if i reset the computer it is still the Default... is there something else i need todo? I am using opensuse 11.4 with KDE as default but i have Gnome installed too.
View 3 Replies
View Related
Apr 14, 2011
I use the CLI a lot (the C+S+F1-F6 terminals), but i have a really tiny resolution on the framebuffer. How do i increase the framebuffer/CLI resolution in suse (that is opensuse 11.4)??
View 2 Replies
View Related
May 2, 2011
I am running opensuse 11.4 on my Lenovo G450. The probem is that the login theme is not changing. Its the same default one. I am sure that I am following the way it should be to assign the new theme but no result. What could it be?
View 9 Replies
View Related
May 26, 2011
Just out of curiosity, what are the dangers(if any) or complications of changing from GNOME to LXDE desktop environment? And what would be the pro's and con's to such a change?
View 2 Replies
View Related
Jun 6, 2011
In OpenSUSE 11.4, I changed my KDM4 theme to KStarboard. All works well except the fact that the background on the login screen is broken into vertical lines just like the original OpenSUSE KDM theme. Is this hardcoded somehow or just a consequence of problems with resolution? My resolution is 1366x768.
View 2 Replies
View Related
