how do I install for dual boot mode, what exactly does that mean ( can I boot in either windows or linux then?), how do I do it, and How hard is it to unistall if i would like later on?
View 8 RepliesI have a jpeg file on my Windows system that won't delete. However, when I try to boot into safe mode to delete it, I can not get into the menu to select "Safe Mode". F8 just boots me right into Ubuntu.I have Windows 7 and Ubuntu 10.10 on an Acer Aspire 5520.
View 3 Replies View RelatedI am using Xp and Ubuntu 9.10 in dual boot mode. Previously when i formatted the linux drive using xp. i had real pain in fixing that up and i fixed it my formatting the drive becoz even my xp stopped booting after that.
Maybe coz the bootloader was grub before that.I want to format my xp now and reinstall a fresh one at the same location.Will the conventional manner of xp installation create problems with grub or mbr ? For xp I used to simply insert my xp disk and boot it till installation is finished.how to do this without affecting the MBR.
I didn't see a spot to do it in the grub menu or bios.I have that obnoxious AV Security Suit virus. This may be as good a reason as any to wipe the drives and install win7.
View 2 Replies View RelatedI have a dual boot xp -ubuntu - AGP ati 2600 series radeon. Intel 8300 dell. The message comes up after login "ubuntu is running in low-graphics mode". I hit ok and I get 5 choices and none of them work.
1) run ubuntu in low-graphics mode.
2) reconfigure graphics.
3) troubleshoot the error.
4) exit to console login.
5) restart X.
i want to install ubuntu 10.04 on my studio 15 with i5 processor (already having win7 home ) in dual boot mode. i tried to install , it installed , but after restarting from second time onwards blank screen is coming and boot options are not coming , ERROR : no module found and with some values i tried for 4 times but unsuccessful , i did below steps
-my hdd is 320 so i separated 200(for win 7) , 50 (for personal ) , 40 unallocated for linux
-inserted ubuntu 10.04 rc1 CD
- in fourth step when selecting disk , i selected manual option(3rd)
- and i selected 40GB unallocated and formatted to ext4 and selected as root and install
- after reboot in boot options i can see 4 options i selected win 7 and from win7 i restarted
- after that black screen coming , boot options are not coming
I have two hard disks sda and sdb. I have Windows XP installed on sda2 and Ubuntu 10.04 on sdb5. When I installed Windows XP, Ubuntu stopped booting. I tried to repair grub2 from a Live CD unsuccessfully. Now I have completely messed up my MBR of both HDDs. I just want to configure grub2 to load both OSes in dual boot mode.
View 9 Replies View Relatedit started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
I have recently installed Ubuntu 10.04 on a Compaq Presario V3000.
To prepare the install, I freed about 15 GB of space, booted from an USB. I chose "use largest continous free space" when it got to that point and then proceeded with the rest.
Now when I choose vista it will not load properly, here's what happens:
1.Windows says loading windows files.
2.After a while, I have to choose a language.
3.Windows looks for operating systems to repair.
If I choose not to, it will take me to a menu where I can choose to fix boot problems, command line, etc...
Linux is running very well, vista is the problem here, I have a recovery disk*, but I wanted to ask you guys if that is the correct move. I really need to keep windows to run some windows only apps.
*This disk was burnt on another computer, an HP from a friend who has the same vista edition. Will this work? This computer's burner is broken..
This is actually something for my gf, she has an account on my computer(only ubuntu on it) and uses it often (Mendley, Zotero, and sciency things in general). She loved it and asked me to install a dual boot with her win system. She use SPSS for whatever kind of statistical analysis it does and she likes ms office better then open office, and I would like to leave her with the choice....
I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies View RelatedI'm having a frustrating time trying to install Ubuntu as a dual boot with Windows 7 on a new Acer Aspire 5750.The initial install proceeded without incident until an error along the lines of "Cannot install GRUB to /dev/sda".I continued without installing GRUB, and attempted to install GRUB from the live CD:Code:sudo mount /dev/sda5 /mntsudo grub-setup -d /mnt/boot/grub /dev/sdaThis installed GRUB, but only linking to my Windows 7 partition (sda2).
View 5 Replies View RelatedI turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies View RelatedI'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
I have a PC with three HD's. My primary hard drive has a single partition and contains Win XP SP3. I have a second hard drive which I use to store junk (pictures, movies, etc). The third, 60GB HD, I just put into my PC and I wanted to install Fedora 11 onto it. I want to have a dual boot system with WinXP being the default boot. I downloaded the latest build of Fedora 11, created a LiveCD out of it and I tried to install the OS onto this third new hard drive. I installed the OS, I told it to use the entire third HD and to have a dual boot setup and make the WinXP OS be the default boot. The installation seemed to go without any problems. However, after restarting the PC, the PC stops booting right after the DELL screen. It gives me a cursor and that's it. It just sits there. I have tried redoing the install about 4 different times now and no matter how I change the different installation options, I get the same result. Now I can't even boot into XP even after I disconnect the third drive. I am guessing that the dual boot got screwed up; I just don't know how to fix it and more importantly, how to install Fedora, dual boot.
View 15 Replies View RelatedSo I have been messing around with the new 10.04 and I managed to screw it up. When I started to log off, I closed the lid to my laptop so it would hibernate, but instead the screen went black and I could only see the cursor. It stayed like that for several minutes so I shut it down manually. When I booted it up again, it froze on the splash/loading screen and I haven't been able to boot it since. I've tried to boot in recovery mode, but I think my campus internet interferes with the downloading of the necessary files from the internet. Is there any way to boot a recovery mode from the install disc? Or am I SOL?
View 6 Replies View Relatedhow do I make grub boot to allow me to choose, like safe mode and normal mode and all that second, how do I do automated back ups (preferably using file copy) for something like every sunday at 11:00 am using the command line, i use to know but forgot.
View 1 Replies View RelatedI attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies View Relatedmy linux pc is connected to a lcd monitor with native resolution 1280x1024.The font at the textconsoles is too small for me.
I changed the entry "vga=..."in the file /boot/grub/menu.lst to "vga=0x0314".During the first few seconds the screen-resolution matches the setting of the vga-mode, but after then the vga-mode automatically switches to 1280x1024 (only at the textconsoles).The x-server is configured to 800x600 which is the resolution I want.I also tried vga=normal and vga=788. In older suse-version 10 and lower never had this problem.
Just a little disappointed. I downloaded the 11.4 Gnome by about midnight, checked the CD for integrity,and started the Live CD, and it worked quite well. Installed it, but troubles started. OpenSuse 11.4 won't boot up in the normal mode, but would boot up in the safe mode only. I am now writing from the safe mode, but would like to boot up normally. It get stuck after the first verbose page. And not a move from there. The laptop is Lenovo T400, Core2Duo with 4GB RAM, screen 1440x900. No problem with any other distros up to now.
View 9 Replies View RelatedI did a text installation of the Minimal Install CD of 9.10 (Karmic) and wound up with a console only. I installed Icewm, how to boot to graphic (GUI) mode.
View 5 Replies View RelatedI started having this issue two days after installing openSUSE. When I try to boot it on battery (that is, without a energy plug) the laptop just turn off right at the beginning. I have other OS's installed and they are working properly and booting when in battery mode. I haven't got a clue of what I need to check to fix this, can anyone help me out? My laptop is a vostro V13.
View 2 Replies View RelatedRunning Suse 10.3, desktop box, Asus M2NPV-VM, Athlon 64 3800+, two HDD RAID 1 config. I was getting 'bad block' errors when logging into Root, ran a search for fsck to try and fix the problem. Found out not a good idea to run while the system is mounted, tried to boot from install DVD, could not boot to a command prompt, tried to open the Repair tool, got a 'repair failed' message. Rebooted again to the HDD, but now it hangs, tried to go to Failsafe mode, same thing.
Was able to boot to Recovery mode, but not sure where to go from here. I also noted when booting to the HDD in 'verbose' mode it was showing a lot of 'irrecoverable error's on the boot logs concerning the HDD.
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
It would be convenient if i could simply install 11.3 along side my Ubuntu distro. I see yast enables me to reduce my sda1 and create a new partition, (sda3) However it offers to mount sda3 in /usr ? Could you offer me any advice please? My objective is to be able to select which distro from the grub menu.
View 9 Replies View RelatedGnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies View RelatedI have been trying to install openSUSE 11.4 on a Windows 7 laptop, but the suggested partitioning sucks and I lack the skills to do it manually. I would like to format the laptop drive, give up Windows for good and do a fresh install of openSUSE 11.4. openSUSE wants me to keep Windows boot. But I do not want it!
I have tried for an hour now. Can't format, there is no options for that in the openSUSE 11.4 install. There are expert options, but I really do not know how many partitions does openSUSE require. For some strange reason openSUSE wants to keep my Windows partitions. WHY? And if I delete all of the partitions, it wont automatically recreate the needed partitions for openSUSE, it only displays errors and won't let me continue.
For the love of God, do I have to open the laptop, remove the hard drive, put it in another computer and format there?
Why isn't there an option for removing all partitions, formatting the drive and installing openSUSE?
How to disable the forced Win 7 dual boot openSUSE offers and do a fresh install with only openSUSE 11.4 WITHOUT ANY WINDOWS DUAL BOOT BS.
By the way, since my laptops internal DVD is broken and I will not repair it until my daughter is old enough to handle optical drives, I use USB DVD and it won't give me any boot options but starts installation right away. This is also strange.
I am trying to install dual boot Ubuntu with Win XP SP3. I defragmented the hard disk (Capacity 100 GB) of which windows (it shows continous files) is taking 92.5 GB and then it shows only 251 MB left for Ubuntu. I copied almost the entire data into an external hard disk. But still it shows the hard drive with 92 GB. My question is where is the rest of 7 GB. What do I do to get windows to vacate more from hard disk so that I can proceed with Ubuntu.
View 5 Replies View Relatedcan i install win xp to dual boot from ubuntu?
View 9 Replies View RelatedI dual boot ubuntu with windows xp using grub. I need to install windows 7 now too. How do I go about doing this?
View 9 Replies View RelatedI've installed fglrx drivers with 1click install on openSuse11.3. If I try to boot in "normal mode" I end up in black screen. However if I boot in safe mode, then login and startx, everything works ok
Code:
~> fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon HD 4300 Series
OpenGL version string: 3.3.10151 Compatibility Profile Context
Shows fglrx works OK, as well as overall performance is pretty good.
I've done
Code:
aticonfig --initial
radeon drivers is also blacklisted
but running (if it means something)
Code:
# depmod -a; lsmod | grep radeon
radeon 868858 0
ttm 64561 1 radeon
drm_kms_helper 32944 1 radeon
drm 221516 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 6728 1 radeon